提交 1180e01d 编写于 作者: I Ingo Molnar

x86: more cleanups in arch/x86/boot/compressed/misc.c

Before:
   total: 7 errors, 8 warnings, 471 lines checked
After:
   total: 5 errors, 5 warnings, 479 lines checked

( the rest cannot be eliminated due to zlib interface cruftiness. )

No code changed:

arch/x86/boot/compressed/misc.o:

   text	   data	    bss	    dec	    hex	filename
  10716	      8	   2152	  12876	   324c	misc.o.before
  10716	      8	   2152	  12876	   324c	misc.o.after

md5:
   2c20c903986a3c9bca44306c6646067e  misc.o.before.asm
   2c20c903986a3c9bca44306c6646067e  misc.o.after.asm
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 fd77c7ca
......@@ -58,8 +58,8 @@
* 1 bit (last block flag)
* 2 bits (block type)
*
* 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
* The smallest block type encoding is always used.
* 1 block occurs every 32K -1 bytes or when there 50% compression
* has been achieved. The smallest block type encoding is always used.
*
* stored:
* 32 bits length in bytes.
......@@ -95,9 +95,9 @@
*
* All of which is enough to compute an amount of extra data that is required
* to be safe. To avoid problems at the block level allocating 5 extra bytes
* per 32767 bytes of data is sufficient. To avoind problems internal to a block
* adding an extra 32767 bytes (the worst case uncompressed block size) is
* sufficient, to ensure that in the worst case the decompressed data for
* per 32767 bytes of data is sufficient. To avoind problems internal to a
* block adding an extra 32767 bytes (the worst case uncompressed block size)
* is sufficient, to ensure that in the worst case the decompressed data for
* block will stop the byte before the compressed data for a block begins.
* To avoid problems with the compressed data's meta information an extra 18
* bytes are needed. Leading to the formula:
......@@ -116,52 +116,59 @@
* gzip declarations
*/
#define OF(args) args
#define STATIC static
#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset ((s), 0, (n))
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x80000000 /*
* Window size must be at least 32k,
* and a power of two
* We don't actually have a window just
* a huge output buffer so I report
* a 2G windows size, as that should
* always be larger than our output buffer.
*/
/*
* Window size must be at least 32k, and a power of two.
* We don't actually have a window just a huge output buffer,
* so we report a 2G window size, as that should always be
* larger than our output buffer:
*/
#define WSIZE 0x80000000
/* Input buffer: */
static unsigned char *inbuf;
/* Sliding window buffer (and final output buffer): */
static unsigned char *window;
/* Valid bytes in inbuf: */
static unsigned insize;
static uch *inbuf; /* input buffer */
static uch *window; /* Sliding window buffer, (and final output buffer) */
/* Index of next byte to be processed in inbuf: */
static unsigned inptr;
static unsigned insize; /* valid bytes in inbuf */
static unsigned inptr; /* index of next byte to be processed in inbuf */
static unsigned outcnt; /* bytes in output buffer */
/* Bytes in output buffer: */
static unsigned outcnt;
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gz file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAM 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6, 7: reserved */
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond, msg) {if(!(cond)) error(msg); }
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ; }
# define Tracevv(x) {if (verbose > 1) fprintf x ; }
# define Tracec(c, x) {if (verbose && (c)) fprintf x ; }
# define Tracecv(c, x) {if (verbose > 1 && (c)) fprintf x ; }
# define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
# define Trace(x) do { fprintf x; } while (0)
# define Tracev(x) do { if (verbose) fprintf x ; } while (0)
# define Tracevv(x) do { if (verbose > 1) fprintf x ; } while (0)
# define Tracec(c, x) do { if (verbose && (c)) fprintf x ; } while (0)
# define Tracecv(c, x) do { if (verbose > 1 && (c)) fprintf x ; } while (0)
#else
# define Assert(cond, msg)
# define Trace(x)
......@@ -349,9 +356,9 @@ static void flush_window(void)
/* With my window equal to my output buffer
* I only need to compute the crc here.
*/
ulg c = crc; /* temporary variable */
unsigned long c = crc; /* temporary variable */
unsigned n;
uch *in, ch;
unsigned char *in, ch;
in = window;
for (n = 0; n < outcnt; n++) {
......@@ -359,7 +366,7 @@ static void flush_window(void)
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
bytes_out += (unsigned long)outcnt;
outcnt = 0;
}
......@@ -423,8 +430,9 @@ static void parse_elf(void *output)
}
asmlinkage void decompress_kernel(void *rmode, memptr heap,
uch *input_data, unsigned long input_len,
uch *output)
unsigned char *input_data,
unsigned long input_len,
unsigned char *output)
{
real_mode = rmode;
......@@ -447,12 +455,12 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
inptr = 0;
#ifdef CONFIG_X86_64
if ((ulg)output & (__KERNEL_ALIGN - 1))
if ((unsigned long)output & (__KERNEL_ALIGN - 1))
error("Destination address not 2M aligned");
if ((ulg)output >= 0xffffffffffUL)
if ((unsigned long)output >= 0xffffffffffUL)
error("Destination address too large");
#else
if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册