Merge tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "These are all minor bug fixes and cleanups to code in arch/arm and
  arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
  MAINTAINERS file, and removing some dead code"

* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: exynos: Enable Exynos Multi-Core Timer driver
  ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
  ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
  MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
  ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
  ARM: imx: remove dead left-over from i.MX{27,31,35} removal
  ARM: s3c: add one more "fallthrough" statement in Jive
  ARM: s3c: include header for prototype of s3c2410_modify_misccr
  ARM: shmobile: rcar-gen2: Add missing of_node_put()

MAINTAINERS

@@ -3636,6 +3636,7 @@ F:	drivers/net/ethernet/broadcom/bcm4908_enet.*
 F:	drivers/net/ethernet/broadcom/unimac.h
 
 BROADCOM BCM5301X ARM ARCHITECTURE
+M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
@@ -3647,6 +3648,7 @@ F:	arch/arm/boot/dts/bcm953012*
 F:	arch/arm/mach-bcm/bcm_5301x.c
 
 BROADCOM BCM53573 ARM ARCHITECTURE
+M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Rafał Miłecki <rafal@milecki.pl>
 L:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -479,7 +479,6 @@ config ARCH_S3C24XX
 	select GPIO_SAMSUNG
 	select GPIOLIB
 	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_S3C2410_I2C if I2C
 	select NEED_MACH_IO_H
 	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS

arch/arm/Kconfig.debug

@@ -410,12 +410,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \

arch/arm/include/debug/imx-uart.h

@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)

arch/arm/mach-exynos/Kconfig

@@ -20,7 +20,6 @@ menuconfig ARCH_EXYNOS
 	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
-	select HAVE_S3C2410_I2C if I2C
 	select PINCTRL
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM

arch/arm/mach-imx/Kconfig

@@ -21,18 +21,6 @@ config MXC_TZIC
 config MXC_AVIC
 	bool
 
-config MXC_DEBUG_BOARD
-	bool "Enable MXC debug board(for 3-stack)"
-	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
-	help
-	  The debug board is an integral part of the MXC 3-stack(PDK)
-	  platforms, it can be attached or removed from the peripheral
-	  board. On debug board, several debug devices(ethernet, UART,
-	  buttons, LEDs and JTAG) are implemented. Between the MCU and
-	  these devices, a CPLD is added as a bridge which performs
-	  data/address de-multiplexing and decode, signal level shift,
-	  interrupt control and various board functions.
-
 config HAVE_IMX_ANATOP
 	bool
 

arch/arm/mach-imx/Makefile

@@ -14,8 +14,6 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o

arch/arm/mach-ixp4xx/Kconfig

@@ -39,19 +39,6 @@ config ARCH_PRPMC1100
 	  PrPCM1100 Processor Mezanine Module. For more information on
 	  this platform, see <file:Documentation/arm/ixp4xx.rst>.
 
-#
-# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
-#
-config CPU_IXP46X
-	bool
-	depends on MACH_IXDP465
-	default y
-
-config CPU_IXP43X
-	bool
-	depends on MACH_KIXRP435
-	default y
-
 comment "IXP4xx Options"
 
 config IXP4XX_PCI_LEGACY

arch/arm/mach-s3c/Kconfig.s3c64xx

@@ -12,7 +12,6 @@ menuconfig ARCH_S3C64XX
 	select COMMON_CLK_SAMSUNG
 	select GPIO_SAMSUNG if ATAGS
 	select GPIOLIB
-	select HAVE_S3C2410_I2C if I2C
 	select HAVE_TCM
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS if PM

arch/arm/mach-s3c/gpio-samsung.c

@@ -35,6 +35,7 @@
 #include "gpio-core.h"
 #include "gpio-cfg.h"
 #include "gpio-cfg-helpers.h"
+#include "hardware-s3c24xx.h"
 #include "pm.h"
 
 int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,

arch/arm/mach-s3c/mach-jive.c

@@ -247,6 +247,7 @@ static int __init jive_mtdset(char *options)
 	case 1:
 		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
 		nand->partitions = jive_imageB_nand_part;
+		break;
 	case 0:
 		/* this is already setup in the nand info */
 		break;

arch/arm/mach-s5pv210/Kconfig

@@ -12,7 +12,6 @@ config ARCH_S5PV210
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK_SAMSUNG
 	select GPIOLIB
-	select HAVE_S3C2410_I2C if I2C
 	select PINCTRL
 	select PINCTRL_EXYNOS
 	select SOC_SAMSUNG

arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c

@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 

arch/arm64/Kconfig.platforms

@@ -89,6 +89,7 @@ config ARCH_BRCMSTB
 config ARCH_EXYNOS
 	bool "ARMv8 based Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
+	select CLKSRC_EXYNOS_MCT
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
 	select EXYNOS_PMU
 	select PINCTRL

drivers/i2c/busses/Kconfig

@@ -963,16 +963,10 @@ config I2C_RK3X
 	  This driver can also be built as a module. If so, the module will
 	  be called i2c-rk3x.
 
-config HAVE_S3C2410_I2C
-	bool
-	help
-	  This will include I2C support for Samsung SoCs. If you want to
-	  include I2C support for any machine, kindly select this in the
-	  respective Kconfig file.
-
 config I2C_S3C2410
 	tristate "S3C/Exynos I2C Driver"
-	depends on HAVE_S3C2410_I2C || COMPILE_TEST
+	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
+		   ARCH_S5PV210 || COMPILE_TEST
 	help
 	  Say Y here to include support for I2C controller in the
 	  Samsung SoCs (S3C, S5Pv210, Exynos).

include/linux/platform_data/pata_ixp4xx_cf.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
-#define __PLATFORM_DATA_PATA_IXP4XX_H
-
-#include <linux/types.h>
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cmd;
-	void __iomem	*ctl;
-};
-
-#endif