提交 104bf3fb 编写于 作者: J Joe Perches 提交者: David S. Miller

ethernet: Convert ETHER_ADDR_LEN uses to ETH_ALEN

Reduce the number of #defines, use the normal #define from if_ether.h
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6a3c910c
......@@ -14,8 +14,6 @@
#define TX_PAGES 12 /* Two Tx slots */
#define ETHER_ADDR_LEN 6
/* The 8390 specific per-packet-header format. */
struct e8390_pkt_hdr {
unsigned char status; /* status */
......
......@@ -318,7 +318,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr)
i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);
......
......@@ -735,15 +735,14 @@ static int ax_init_dev(struct net_device *dev)
if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
ei_local->mem + E8390_CMD); /* 0x61 */
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] =
ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
}
if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
ax->plat->mac_addr)
memcpy(dev->dev_addr, ax->plat->mac_addr,
ETHER_ADDR_LEN);
memcpy(dev->dev_addr, ax->plat->mac_addr, ETH_ALEN);
ax_reset_8390(dev);
......
......@@ -195,7 +195,7 @@ static int __init es_probe1(struct net_device *dev, int ioaddr)
goto out;
}
for (i = 0; i < ETHER_ADDR_LEN ; i++)
for (i = 0; i < ETH_ALEN ; i++)
dev->dev_addr[i] = inb(ioaddr + ES_SA_PROM + i);
/* Check the Racal vendor ID as well. */
......
......@@ -202,7 +202,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
/* Retrieve and checksum the station address. */
outw(MAC_Page, ioaddr + HP_PAGING);
for(i = 0; i < ETHER_ADDR_LEN; i++) {
for(i = 0; i < ETH_ALEN; i++) {
unsigned char inval = inb(ioaddr + 8 + i);
dev->dev_addr[i] = inval;
checksum += inval;
......
......@@ -156,7 +156,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
for(i = 0; i < ETHER_ADDR_LEN; i++)
for(i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + i);
printk(" %pM", dev->dev_addr);
......
......@@ -129,7 +129,7 @@ static int __devinit hydra_init(struct zorro_dev *z)
if (!dev)
return -ENOMEM;
for(j = 0; j < ETHER_ADDR_LEN; j++)
for (j = 0; j < ETH_ALEN; j++)
dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j));
/* We must set the 8390 for word mode. */
......
......@@ -191,14 +191,14 @@ static int __init lne390_probe1(struct net_device *dev, int ioaddr)
|| inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1
|| inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) {
printk("lne390.c: card not found");
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i));
printk(" (invalid prefix).\n");
return -ENODEV;
}
#endif
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i);
printk("lne390.c: LNE390%X in EISA slot %d, address %pM.\n",
0xa+revision, ioaddr/0x1000, dev->dev_addr);
......
......@@ -312,7 +312,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
dev->base_addr = ioaddr;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);
......
......@@ -503,12 +503,12 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
#ifdef CONFIG_PLAT_MAPPI
outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
ioaddr + E8390_CMD); /* 0x61 */
for (i = 0 ; i < ETHER_ADDR_LEN ; i++) {
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = SA_prom[i]
= inb_p(ioaddr + EN1_PHYS_SHIFT(i));
}
#else
for(i = 0; i < ETHER_ADDR_LEN; i++) {
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = SA_prom[i];
}
#endif
......
......@@ -460,7 +460,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
dev->base_addr = base_addr;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);
......
......@@ -125,7 +125,7 @@ static int __init ne3210_eisa_probe (struct device *device)
#endif
port_index = inb(ioaddr + NE3210_CFG2) >> 6;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
edev->slot, ifmap[port_index], dev->dev_addr);
......
......@@ -114,7 +114,7 @@ static int __init stnic_probe(void)
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_get_node_addr (stnic_eadr);
#endif
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = stnic_eadr[i];
/* Set the base address to point to the NIC, not the "real" base! */
......
......@@ -365,7 +365,7 @@ static int __devinit zorro8390_init(struct net_device *dev,
if (i)
return i;
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
pr_debug("Found ethernet address: %pM\n", dev->dev_addr);
......
......@@ -160,8 +160,6 @@ Include Files
Defines
---------------------------------------------------------------------------- */
#define ETHER_ADDR_LEN ETH_ALEN
/* 6 bytes in an Ethernet Address */
#define MACE_LADRF_LEN 8
/* 8 bytes in Logical Address Filter */
......@@ -600,7 +598,7 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
}
}
/* Set PADR register */
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
/* MAC Configuration Control Register should be written last */
......@@ -639,11 +637,11 @@ static int nmclan_config(struct pcmcia_device *link)
/* Read the ethernet address from the CIS. */
len = pcmcia_get_tuple(link, 0x80, &buf);
if (!buf || len < ETHER_ADDR_LEN) {
if (!buf || len < ETH_ALEN) {
kfree(buf);
goto failed;
}
memcpy(dev->dev_addr, buf, ETHER_ADDR_LEN);
memcpy(dev->dev_addr, buf, ETH_ALEN);
kfree(buf);
/* Verify configuration by reading the MACE ID. */
......@@ -1421,7 +1419,7 @@ Output
static void set_multicast_list(struct net_device *dev)
{
mace_private *lp = netdev_priv(dev);
int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */
int adr[ETH_ALEN] = {0}; /* Ethernet address */
struct netdev_hw_addr *ha;
#ifdef PCMCIA_DEBUG
......@@ -1443,7 +1441,7 @@ static void set_multicast_list(struct net_device *dev)
/* Calculate multicast logical address filter */
memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
netdev_for_each_mc_addr(ha, dev) {
memcpy(adr, ha->addr, ETHER_ADDR_LEN);
memcpy(adr, ha->addr, ETH_ALEN);
BuildLAF(lp->multicast_ladrf, adr);
}
}
......
......@@ -163,7 +163,6 @@ enum sbmac_state {
#define SBMAC_MAX_TXDESCR 256
#define SBMAC_MAX_RXDESCR 256
#define ETHER_ADDR_LEN 6
#define ENET_PACKET_SIZE 1518
/*#define ENET_PACKET_SIZE 9216 */
......@@ -266,7 +265,7 @@ struct sbmac_softc {
int sbm_pause; /* current pause setting */
int sbm_link; /* current link state */
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
unsigned char sbm_hwaddr[ETH_ALEN];
struct sbmacdma sbm_txdma; /* only channel 0 for now */
struct sbmacdma sbm_rxdma;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册