usb-storage: make sddr09 a separate module

This patch (as1207) converts usb-storage's sddr09 subdriver into a
separate module.

An unexpected complication arises because of DPCM devices, in which
one LUN uses the sddr09 transport and one uses the standard CB
transport.  Since these devices can be used even when
USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h
require special treatment.  If SDDR09 isn't configured then the
entries remain in unusual_devs.h; if it is then the entries are
present in unusual_sddr09.h instead.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/storage/Kconfig

@@ -83,13 +83,15 @@ config USB_STORAGE_USBAT
 	  - Sandisk ImageMate SDDR-05b
 
 config USB_STORAGE_SDDR09
-	bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
+	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
 	depends on USB_STORAGE
 	help
 	  Say Y here to include additional code to support the Sandisk SDDR-09
 	  SmartMedia reader in the USB Mass Storage driver.
 	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 
+	  If this driver is compiled as a module, it will be named ums-sddr09.
+
 config USB_STORAGE_SDDR55
 	bool "SanDisk SDDR-55 SmartMedia support"
 	depends on USB_STORAGE

drivers/usb/storage/Makefile

@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
 usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT)	+= shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)	+= sddr55.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)	+= freecom.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)	+= isd200.o
@@ -30,3 +29,7 @@ ifeq ($(CONFIG_USB_LIBUSUAL),)
 else
 	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
+
+obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
+
+ums-sddr09-objs		:= sddr09.o

drivers/usb/storage/sddr09.c

@@ -41,6 +41,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
 #include <scsi/scsi.h>
@@ -51,7 +52,50 @@
 #include "transport.h"
 #include "protocol.h"
 #include "debug.h"
-#include "sddr09.h"
+
+
+static int usb_stor_sddr09_dpcm_init(struct us_data *us);
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+static int usb_stor_sddr09_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id sddr09_usb_ids[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, sddr09_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev sddr09_unusual_dev_list[] = {
+#	include "unusual_sddr09.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
 
 
 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
@@ -1406,7 +1450,7 @@ sddr09_common_init(struct us_data *us) {
  * unusual devices list but called from here then LUN 0 of the combo reader
  * is not recognized. But I do not know what precisely these calls do.
  */
-int
+static int
 usb_stor_sddr09_dpcm_init(struct us_data *us) {
 	int result;
 	unsigned char *data = us->iobuf;
@@ -1456,7 +1500,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
 /*
  * Transport for the Microtech DPCM-USB
  */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 
@@ -1498,7 +1542,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Transport for the Sandisk SDDR-09
  */
-int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	static unsigned char sensekey = 0, sensecode = 0;
 	static unsigned char havefakesense = 0;
@@ -1697,7 +1741,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
 /*
  * Initialization routine for the sddr09 subdriver
  */
-int
+static int
 usb_stor_sddr09_init(struct us_data *us) {
 	return sddr09_common_init(us);
 }
+
+static int sddr09_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - sddr09_usb_ids) + sddr09_unusual_dev_list);
+	if (result)
+		return result;
+
+	if (us->protocol == US_PR_DPCM_USB) {
+		us->transport_name = "Control/Bulk-EUSB/SDDR09";
+		us->transport = dpcm_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 1;
+	} else {
+		us->transport_name = "EUSB/SDDR09";
+		us->transport = sddr09_transport;
+		us->transport_reset = usb_stor_CB_reset;
+		us->max_lun = 0;
+	}
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver sddr09_driver = {
+	.name =		"ums-sddr09",
+	.probe =	sddr09_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	sddr09_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init sddr09_init(void)
+{
+	return usb_register(&sddr09_driver);
+}
+
+static void __exit sddr09_exit(void)
+{
+	usb_deregister(&sddr09_driver);
+}
+
+module_init(sddr09_init);
+module_exit(sddr09_exit);

drivers/usb/storage/unusual_devs.h

@@ -53,6 +53,11 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
+		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+#define NO_SDDR09
+#endif
+
 /* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
  */
 UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
@@ -246,12 +251,7 @@ UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",
@@ -467,20 +467,7 @@ UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-
-/* This entry is from Andries.Brouwer@cwi.nl */
-UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
-		"SCM Microsystems",
-		"eUSB SmartMedia / CompactFlash Adapter",
-		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
-		0),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB CompactFlash Adapter",
@@ -935,14 +922,6 @@ UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
 		"Floppy Drive",
 		US_SC_UFI, US_PR_CB, NULL, 0 ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
-		"Olympus",
-		"Camedia MAUSB-2",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
 /* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
 UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
 		"SigmaTel",
@@ -1057,14 +1036,6 @@ UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
 		US_SC_SCSI, US_PR_CB, NULL,
 		US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
-		"Sandisk",
-		"ImageMate SDDR-09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
-		0),
-#endif
-
 #ifdef CONFIG_USB_STORAGE_FREECOM
 UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
 		"Freecom",
@@ -1091,12 +1062,7 @@ UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
-		"Microtech",
-		"CameraMate (DPCM_USB)",
- 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
-#else
+#ifdef NO_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate",

drivers/usb/storage/sddr09.h → drivers/usb/storage/unusual_sddr09.h

-/* Driver for SanDisk SDDR-09 SmartMedia reader
- * Header File
- *
- * Current development and maintenance by:
- *   (c) 2000 Robert Baruch (autophile@dol.net)
- *   (c) 2002 Andries Brouwer (aeb@cwi.nl)
- *
- * See sddr09.c for more explanation
+/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -22,17 +15,42 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _USB_SHUTTLE_EUSB_SDDR09_H
-#define _USB_SHUTTLE_EUSB_SDDR09_H
+#if defined(CONFIG_USB_STORAGE_SDDR09) || \
+		defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
+
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
 
-/* Sandisk SDDR-09 stuff */
+/* This entry is from Andries.Brouwer@cwi.nl */
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+		"SCM Microsystems",
+		"eUSB SmartMedia / CompactFlash Adapter",
+		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		0),
 
-extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
+UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
+		"Olympus",
+		"Camedia MAUSB-2",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
 
-/* Microtech DPCM-USB stuff */
+UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
+		"Sandisk",
+		"ImageMate SDDR-09",
+		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		0),
 
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+		"Microtech",
+		"CameraMate (DPCM_USB)",
+		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
 
-#endif
+#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */

drivers/usb/storage/usb.c

@@ -69,9 +69,6 @@
 #ifdef CONFIG_USB_STORAGE_USBAT
 #include "shuttle_usbat.h"
 #endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#include "sddr09.h"
-#endif
 #ifdef CONFIG_USB_STORAGE_SDDR55
 #include "sddr55.h"
 #endif
@@ -631,15 +628,6 @@ static void get_transport(struct us_data *us)
 		break;
 #endif
 
-#ifdef CONFIG_USB_STORAGE_SDDR09
-	case US_PR_EUSB_SDDR09:
-		us->transport_name = "EUSB/SDDR09";
-		us->transport = sddr09_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 0;
-		break;
-#endif
-
 #ifdef CONFIG_USB_STORAGE_SDDR55
 	case US_PR_SDDR55:
 		us->transport_name = "SDDR55";
@@ -649,15 +637,6 @@ static void get_transport(struct us_data *us)
 		break;
 #endif
 
-#ifdef CONFIG_USB_STORAGE_DPCM
-	case US_PR_DPCM_USB:
-		us->transport_name = "Control/Bulk-EUSB/SDDR09";
-		us->transport = dpcm_transport;
-		us->transport_reset = usb_stor_CB_reset;
-		us->max_lun = 1;
-		break;
-#endif
-
 #ifdef CONFIG_USB_STORAGE_FREECOM
 	case US_PR_FREECOM:
 		us->transport_name = "Freecom";

drivers/usb/storage/usual-tables.c

@@ -77,6 +77,7 @@ struct ignore_entry {
 }
 
 static struct ignore_entry ignore_ids[] = {
+#	include "unusual_sddr09.h"
 	{ }		/* Terminating entry */
 };