USB: dummy-hcd: fix power budget for SuperSpeed mode

commit 2636d49b upstream.

The power budget for SuperSpeed mode should be 900 mA
according to USB specification, so set the power budget
to 900mA for dummy_start_ss which is only used for
SuperSpeed mode.

If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.
Signed-off-by: NJacky Cao <Jacky.Cao@sony.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/16EA1F625E922C43B00B9D82250220500871CDE5@APYOKXMS108.ap.sony.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

drivers/usb/gadget/udc/dummy_hcd.c

@@ -48,6 +48,7 @@
 #define DRIVER_VERSION	"02 May 2005"
 
 #define POWER_BUDGET	500	/* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3	900	/* in mA */
 
 static const char	driver_name[] = "dummy_hcd";
 static const char	driver_desc[] = "USB Host+Gadget Emulator";
@@ -2446,7 +2447,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
 	dum_hcd->rh_state = DUMMY_RH_RUNNING;
 	dum_hcd->stream_en_ep = 0;
 	INIT_LIST_HEAD(&dum_hcd->urbp_list);
-	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
 	dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
 	dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
 #ifdef CONFIG_USB_OTG