Merge branch 'mt7530-interrupt-support'

DENG Qingfang says:

====================
MT7530 interrupt support

Add support for MT7530 interrupt controller.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/dsa/mt7530.txt

@@ -81,6 +81,12 @@ Optional properties:
 - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
 	GPIO mode.
 - #gpio-cells: Must be 2 if gpio-controller is defined.
+- interrupt-controller: Boolean; Enables the internal interrupt controller.
+
+If interrupt-controller is defined, the following properties are required.
+
+- #interrupt-cells: Must be 1.
+- interrupts: Parent interrupt for the interrupt controller.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must

drivers/net/dsa/mt7530.c

@@ -10,6 +10,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/of_irq.h>
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/of_platform.h>
@@ -596,18 +597,14 @@ mt7530_mib_reset(struct dsa_switch *ds)
 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
 }
 
-static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
+static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum)
 {
-	struct mt7530_priv *priv = ds->priv;
-
 	return mdiobus_read_nested(priv->bus, port, regnum);
 }
 
-static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
+static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum,
 			    u16 val)
 {
-	struct mt7530_priv *priv = ds->priv;
-
 	return mdiobus_write_nested(priv->bus, port, regnum, val);
 }
 
@@ -785,9 +782,8 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
 }
 
 static int
-mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
+mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum)
 {
-	struct mt7530_priv *priv = ds->priv;
 	int devad;
 	int ret;
 
@@ -803,10 +799,9 @@ mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
 }
 
 static int
-mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
+mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum,
 		     u16 data)
 {
-	struct mt7530_priv *priv = ds->priv;
 	int devad;
 	int ret;
 
@@ -822,6 +817,22 @@ mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
 	return ret;
 }
 
+static int
+mt753x_phy_read(struct mii_bus *bus, int port, int regnum)
+{
+	struct mt7530_priv *priv = bus->priv;
+
+	return priv->info->phy_read(priv, port, regnum);
+}
+
+static int
+mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val)
+{
+	struct mt7530_priv *priv = bus->priv;
+
+	return priv->info->phy_write(priv, port, regnum, val);
+}
+
 static void
 mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
 		   uint8_t *data)
@@ -1828,6 +1839,210 @@ mt7530_setup_gpio(struct mt7530_priv *priv)
 }
 #endif /* CONFIG_GPIOLIB */
 
+static irqreturn_t
+mt7530_irq_thread_fn(int irq, void *dev_id)
+{
+	struct mt7530_priv *priv = dev_id;
+	bool handled = false;
+	u32 val;
+	int p;
+
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
+	mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
+	mutex_unlock(&priv->bus->mdio_lock);
+
+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
+		if (BIT(p) & val) {
+			unsigned int irq;
+
+			irq = irq_find_mapping(priv->irq_domain, p);
+			handle_nested_irq(irq);
+			handled = true;
+		}
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static void
+mt7530_irq_mask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable &= ~BIT(d->hwirq);
+}
+
+static void
+mt7530_irq_unmask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable |= BIT(d->hwirq);
+}
+
+static void
+mt7530_irq_bus_lock(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+	mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static struct irq_chip mt7530_irq_chip = {
+	.name = KBUILD_MODNAME,
+	.irq_mask = mt7530_irq_mask,
+	.irq_unmask = mt7530_irq_unmask,
+	.irq_bus_lock = mt7530_irq_bus_lock,
+	.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
+};
+
+static int
+mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
+	       irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, domain->host_data);
+	irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
+	irq_set_nested_thread(irq, true);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mt7530_irq_domain_ops = {
+	.map = mt7530_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void
+mt7530_setup_mdio_irq(struct mt7530_priv *priv)
+{
+	struct dsa_switch *ds = priv->ds;
+	int p;
+
+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
+		if (BIT(p) & ds->phys_mii_mask) {
+			unsigned int irq;
+
+			irq = irq_create_mapping(priv->irq_domain, p);
+			ds->slave_mii_bus->irq[p] = irq;
+		}
+	}
+}
+
+static int
+mt7530_setup_irq(struct mt7530_priv *priv)
+{
+	struct device *dev = priv->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	if (!of_property_read_bool(np, "interrupt-controller")) {
+		dev_info(dev, "no interrupt support\n");
+		return 0;
+	}
+
+	priv->irq = of_irq_get(np, 0);
+	if (priv->irq <= 0) {
+		dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq);
+		return priv->irq ? : -EINVAL;
+	}
+
+	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+						 &mt7530_irq_domain_ops, priv);
+	if (!priv->irq_domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	/* This register must be set for MT7530 to properly fire interrupts */
+	if (priv->id != ID_MT7531)
+		mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
+
+	ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn,
+				   IRQF_ONESHOT, KBUILD_MODNAME, priv);
+	if (ret) {
+		irq_domain_remove(priv->irq_domain);
+		dev_err(dev, "failed to request IRQ: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void
+mt7530_free_mdio_irq(struct mt7530_priv *priv)
+{
+	int p;
+
+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
+		if (BIT(p) & priv->ds->phys_mii_mask) {
+			unsigned int irq;
+
+			irq = irq_find_mapping(priv->irq_domain, p);
+			irq_dispose_mapping(irq);
+		}
+	}
+}
+
+static void
+mt7530_free_irq_common(struct mt7530_priv *priv)
+{
+	free_irq(priv->irq, priv);
+	irq_domain_remove(priv->irq_domain);
+}
+
+static void
+mt7530_free_irq(struct mt7530_priv *priv)
+{
+	mt7530_free_mdio_irq(priv);
+	mt7530_free_irq_common(priv);
+}
+
+static int
+mt7530_setup_mdio(struct mt7530_priv *priv)
+{
+	struct dsa_switch *ds = priv->ds;
+	struct device *dev = priv->dev;
+	struct mii_bus *bus;
+	static int idx;
+	int ret;
+
+	bus = devm_mdiobus_alloc(dev);
+	if (!bus)
+		return -ENOMEM;
+
+	ds->slave_mii_bus = bus;
+	bus->priv = priv;
+	bus->name = KBUILD_MODNAME "-mii";
+	snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
+	bus->read = mt753x_phy_read;
+	bus->write = mt753x_phy_write;
+	bus->parent = dev;
+	bus->phy_mask = ~ds->phys_mii_mask;
+
+	if (priv->irq)
+		mt7530_setup_mdio_irq(priv);
+
+	ret = mdiobus_register(bus);
+	if (ret) {
+		dev_err(dev, "failed to register MDIO bus: %d\n", ret);
+		if (priv->irq)
+			mt7530_free_mdio_irq(priv);
+	}
+
+	return ret;
+}
+
 static int
 mt7530_setup(struct dsa_switch *ds)
 {
@@ -2791,24 +3006,20 @@ static int
 mt753x_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
+	int ret = priv->info->sw_setup(ds);
 
-	return priv->info->sw_setup(ds);
-}
-
-static int
-mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
-	struct mt7530_priv *priv = ds->priv;
+	if (ret)
+		return ret;
 
-	return priv->info->phy_read(ds, port, regnum);
-}
+	ret = mt7530_setup_irq(priv);
+	if (ret)
+		return ret;
 
-static int
-mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
-{
-	struct mt7530_priv *priv = ds->priv;
+	ret = mt7530_setup_mdio(priv);
+	if (ret && priv->irq)
+		mt7530_free_irq_common(priv);
 
-	return priv->info->phy_write(ds, port, regnum, val);
+	return ret;
 }
 
 static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
@@ -2845,8 +3056,6 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
 	.get_tag_protocol	= mtk_get_tag_protocol,
 	.setup			= mt753x_setup,
 	.get_strings		= mt7530_get_strings,
-	.phy_read		= mt753x_phy_read,
-	.phy_write		= mt753x_phy_write,
 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
 	.get_sset_count		= mt7530_get_sset_count,
 	.set_ageing_time	= mt7530_set_ageing_time,
@@ -3029,6 +3238,9 @@ mt7530_remove(struct mdio_device *mdiodev)
 		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
 			ret);
 
+	if (priv->irq)
+		mt7530_free_irq(priv);
+
 	dsa_unregister_switch(priv->ds);
 	mutex_destroy(&priv->reg_mutex);
 }

drivers/net/dsa/mt7530.h

@@ -7,6 +7,7 @@
 #define __MT7530_H
 
 #define MT7530_NUM_PORTS		7
+#define MT7530_NUM_PHYS			5
 #define MT7530_CPU_PORT			6
 #define MT7530_NUM_FDB_RECORDS		2048
 #define MT7530_ALL_MEMBERS		0xff
@@ -393,6 +394,12 @@ enum mt7531_sgmii_force_duplex {
 #define  SYS_CTRL_SW_RST		BIT(1)
 #define  SYS_CTRL_REG_RST		BIT(0)
 
+/* Register for system interrupt */
+#define MT7530_SYS_INT_EN		0x7008
+
+/* Register for system interrupt status */
+#define MT7530_SYS_INT_STS		0x700c
+
 /* Register for PHY Indirect Access Control */
 #define MT7531_PHY_IAC			0x701C
 #define  MT7531_PHY_ACS_ST		BIT(31)
@@ -714,6 +721,8 @@ static const char *p5_intf_modes(unsigned int p5_interface)
 	}
 }
 
+struct mt7530_priv;
+
 /* struct mt753x_info -	This is the main data structure for holding the specific
  *			part for each supported device
  * @sw_setup:		Holding the handler to a device initialization
@@ -738,8 +747,8 @@ struct mt753x_info {
 	enum mt753x_id id;
 
 	int (*sw_setup)(struct dsa_switch *ds);
-	int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
-	int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
+	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
+	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
@@ -773,6 +782,10 @@ struct mt753x_info {
  *			registers
  * @p6_interface	Holding the current port 6 interface
  * @p5_intf_sel:	Holding the current port 5 interface select
+ *
+ * @irq:		IRQ number of the switch
+ * @irq_domain:		IRQ domain of the switch irq_chip
+ * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
  */
 struct mt7530_priv {
 	struct device		*dev;
@@ -794,6 +807,9 @@ struct mt7530_priv {
 	struct mt7530_port	ports[MT7530_NUM_PORTS];
 	/* protect among processes for registers access*/
 	struct mutex reg_mutex;
+	int irq;
+	struct irq_domain *irq_domain;
+	u32 irq_enable;
 };
 
 struct mt7530_hw_vlan_entry {

drivers/net/phy/Kconfig

@@ -207,6 +207,11 @@ config MARVELL_88X2222_PHY
 	  Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
 	  Transceiver.
 
+config MEDIATEK_GE_PHY
+	tristate "MediaTek Gigabit Ethernet PHYs"
+	help
+	  Supports the MediaTek Gigabit Ethernet PHYs.
+
 config MICREL_PHY
 	tristate "Micrel PHYs"
 	help

drivers/net/phy/Makefile

@@ -64,6 +64,7 @@ obj-$(CONFIG_LXT_PHY)		+= lxt.o
 obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell10g.o
 obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
 obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
+obj-$(CONFIG_MEDIATEK_GE_PHY)	+= mediatek-ge.o
 obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o

drivers/net/phy/mediatek-ge.c

+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MTK_EXT_PAGE_ACCESS		0x1f
+#define MTK_PHY_PAGE_STANDARD		0x0000
+#define MTK_PHY_PAGE_EXTENDED		0x0001
+#define MTK_PHY_PAGE_EXTENDED_2		0x0002
+#define MTK_PHY_PAGE_EXTENDED_3		0x0003
+#define MTK_PHY_PAGE_EXTENDED_2A30	0x2a30
+#define MTK_PHY_PAGE_EXTENDED_52B5	0x52b5
+
+static int mtk_gephy_read_page(struct phy_device *phydev)
+{
+	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+
+static int mtk_gephy_write_page(struct phy_device *phydev, int page)
+{
+	return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+
+static void mtk_gephy_config_init(struct phy_device *phydev)
+{
+	/* Disable EEE */
+	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+
+	/* Enable HW auto downshift */
+	phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
+
+	/* Increase SlvDPSready time */
+	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+	__phy_write(phydev, 0x10, 0xafae);
+	__phy_write(phydev, 0x12, 0x2f);
+	__phy_write(phydev, 0x10, 0x8fae);
+	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+	/* Adjust 100_mse_threshold */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
+
+	/* Disable mcc */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
+}
+
+static int mt7530_phy_config_init(struct phy_device *phydev)
+{
+	mtk_gephy_config_init(phydev);
+
+	/* Increase post_update_timer */
+	phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
+
+	return 0;
+}
+
+static int mt7531_phy_config_init(struct phy_device *phydev)
+{
+	if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL)
+		return -EINVAL;
+
+	mtk_gephy_config_init(phydev);
+
+	/* PHY link down power saving enable */
+	phy_set_bits(phydev, 0x17, BIT(4));
+	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
+
+	/* Set TX Pair delay selection */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
+
+	return 0;
+}
+
+static struct phy_driver mtk_gephy_driver[] = {
+	{
+		PHY_ID_MATCH_EXACT(0x03a29412),
+		.name		= "MediaTek MT7530 PHY",
+		.config_init	= mt7530_phy_config_init,
+		/* Interrupts are handled by the switch, not the PHY
+		 * itself.
+		 */
+		.config_intr	= genphy_no_config_intr,
+		.handle_interrupt = genphy_handle_interrupt_no_ack,
+		.read_page	= mtk_gephy_read_page,
+		.write_page	= mtk_gephy_write_page,
+	},
+	{
+		PHY_ID_MATCH_EXACT(0x03a29441),
+		.name		= "MediaTek MT7531 PHY",
+		.config_init	= mt7531_phy_config_init,
+		/* Interrupts are handled by the switch, not the PHY
+		 * itself.
+		 */
+		.config_intr	= genphy_no_config_intr,
+		.handle_interrupt = genphy_handle_interrupt_no_ack,
+		.read_page	= mtk_gephy_read_page,
+		.write_page	= mtk_gephy_write_page,
+	},
+};
+
+module_phy_driver(mtk_gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
+	{ PHY_ID_MATCH_VENDOR(0x03a29400) },
+	{ }
+};
+
+MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver");
+MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_gephy_tbl);

drivers/staging/mt7621-dts/mt7621.dtsi

@@ -437,6 +437,10 @@
 				mediatek,mcm;
 				resets = <&rstctrl 2>;
 				reset-names = "mcm";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
 				ports {
 					#address-cells = <1>;