提交 0f52bf90 编写于 作者: B Brice Goglin 提交者: Jeff Garzik

[PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200

There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig
(one for ipw2100 and one for ipw2200).  The attached patch splits it into
IPW2100_DEBUG and IPW2200_DEBUG.
Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org>
Cc: "James P. Ketrenos" <ipw2100-admin@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
上级 c75f4742
......@@ -173,7 +173,7 @@ config IPW2100_MONITOR
promiscuous mode via the Wireless Tool's Monitor mode. While in this
mode, no packets can be sent.
config IPW_DEBUG
config IPW2100_DEBUG
bool "Enable full debugging output in IPW2100 module."
depends on IPW2100
---help---
......@@ -217,7 +217,7 @@ config IPW2200
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2200.ko.
config IPW_DEBUG
config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
---help---
......
......@@ -175,7 +175,7 @@ that only one external action is invoked at a time.
#define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation"
/* Debugging stuff */
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
#define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
#endif
......@@ -208,7 +208,7 @@ MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
static u32 ipw2100_debug_level = IPW_DL_NONE;
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
#define IPW_DEBUG(level, message...) \
do { \
if (ipw2100_debug_level & (level)) { \
......@@ -219,9 +219,9 @@ do { \
} while (0)
#else
#define IPW_DEBUG(level, message...) do {} while (0)
#endif /* CONFIG_IPW_DEBUG */
#endif /* CONFIG_IPW2100_DEBUG */
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
static const char *command_types[] = {
"undefined",
"unused", /* HOST_ATTENTION */
......@@ -2081,7 +2081,7 @@ static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
priv->status &= ~STATUS_SCANNING;
}
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
#define IPW2100_HANDLER(v, f) { v, f, # v }
struct ipw2100_status_indicator {
int status;
......@@ -2094,7 +2094,7 @@ struct ipw2100_status_indicator {
int status;
void (*cb) (struct ipw2100_priv * priv, u32 status);
};
#endif /* CONFIG_IPW_DEBUG */
#endif /* CONFIG_IPW2100_DEBUG */
static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
{
......@@ -2149,7 +2149,7 @@ static void isr_status_change(struct ipw2100_priv *priv, int status)
static void isr_rx_complete_command(struct ipw2100_priv *priv,
struct ipw2100_cmd_header *cmd)
{
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
IPW_DEBUG_HC("Command completed '%s (%d)'\n",
command_types[cmd->host_command_reg],
......@@ -2167,7 +2167,7 @@ static void isr_rx_complete_command(struct ipw2100_priv *priv,
wake_up_interruptible(&priv->wait_command_queue);
}
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
static const char *frame_types[] = {
"COMMAND_STATUS_VAL",
"STATUS_CHANGE_VAL",
......@@ -2290,7 +2290,7 @@ static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
{
#ifdef CONFIG_IPW_DEBUG_C3
#ifdef CONFIG_IPW2100_DEBUG_C3
struct ipw2100_status *status = &priv->status_queue.drv[i];
u32 match, reg;
int j;
......@@ -2312,7 +2312,7 @@ static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
}
#endif
#ifdef CONFIG_IPW_DEBUG_C3
#ifdef CONFIG_IPW2100_DEBUG_C3
/* Halt the fimrware so we can get a good image */
write_register(priv->net_dev, IPW_REG_RESET_REG,
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
......@@ -2716,7 +2716,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
list_del(element);
DEC_STAT(&priv->fw_pend_stat);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
{
int i = txq->oldest;
IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
......@@ -2782,7 +2782,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
"something else: ids %d=%d.\n",
priv->net_dev->name, txq->oldest, packet->index);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
if (packet->info.c_struct.cmd->host_command_reg <
sizeof(command_types) / sizeof(*command_types))
IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
......@@ -2975,7 +2975,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
packet->index, tbd->host_addr, tbd->buf_length);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
if (packet->info.d_struct.txb->nr_frags > 1)
IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
packet->info.d_struct.txb->nr_frags);
......@@ -3827,7 +3827,7 @@ static ssize_t show_stats(struct device *d, struct device_attribute *attr,
priv->rx_interrupts, priv->inta_other);
out += sprintf(out, "firmware resets: %d\n", priv->resets);
out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
out += sprintf(out, "packet mismatch image: %s\n",
priv->snapshot[0] ? "YES" : "NO");
#endif
......@@ -3982,7 +3982,7 @@ static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
static ssize_t show_debug_level(struct device_driver *d, char *buf)
{
return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
......@@ -4011,7 +4011,7 @@ static ssize_t store_debug_level(struct device_driver *d,
static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
store_debug_level);
#endif /* CONFIG_IPW_DEBUG */
#endif /* CONFIG_IPW2100_DEBUG */
static ssize_t show_fatal_error(struct device *d,
struct device_attribute *attr, char *buf)
......@@ -4937,7 +4937,7 @@ static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
};
int err;
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
if (bssid != NULL)
IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
......@@ -6858,7 +6858,7 @@ static int __init ipw2100_init(void)
ret = pci_module_init(&ipw2100_pci_driver);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
ipw2100_debug_level = debug;
driver_create_file(&ipw2100_pci_driver.driver,
&driver_attr_debug_level);
......@@ -6873,7 +6873,7 @@ static int __init ipw2100_init(void)
static void __exit ipw2100_exit(void)
{
/* FIXME: IPG: check that we have no instances of the devices open */
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
driver_remove_file(&ipw2100_pci_driver.driver,
&driver_attr_debug_level);
#endif
......@@ -8558,7 +8558,7 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
quality = min(beacon_qual, min(tx_qual, rssi_qual));
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2100_DEBUG
if (beacon_qual == quality)
IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
else if (tx_qual == quality)
......
......@@ -73,7 +73,7 @@ struct ipw2100_rx_packet;
* you simply need to add your entry to the ipw2100_debug_levels array.
*
* If you do not see debug_level in /proc/net/ipw2100 then you do not have
* CONFIG_IPW_DEBUG defined in your kernel configuration
* CONFIG_IPW2100_DEBUG defined in your kernel configuration
*
*/
......
......@@ -462,7 +462,7 @@ static inline void ipw_disable_interrupts(struct ipw_priv *priv)
ipw_write32(priv, IPW_INTA_MASK_R, ~IPW_INTA_MASK_ALL);
}
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
static char *ipw_error_desc(u32 val)
{
switch (val) {
......@@ -1235,7 +1235,7 @@ static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
struct ipw_priv *priv = dev_get_drvdata(d);
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
struct net_device *dev = priv->net_dev;
#endif
char buffer[] = "00000000";
......@@ -1754,7 +1754,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
IPW_ERROR("Firmware error detected. Restarting.\n");
if (priv->error) {
IPW_ERROR("Sysfs 'error' log already exists.\n");
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
if (ipw_debug_level & IPW_DL_FW_ERRORS) {
struct ipw_fw_error *error =
ipw_alloc_error_log(priv);
......@@ -1770,7 +1770,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv)
else
IPW_ERROR("Error allocating sysfs 'error' "
"log.\n");
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
if (ipw_debug_level & IPW_DL_FW_ERRORS)
ipw_dump_error_log(priv, priv->error);
#endif
......@@ -3778,7 +3778,7 @@ static const struct ipw_status_code ipw_status_codes[] = {
{0x2E, "Cipher suite is rejected per security policy"},
};
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
static const char *ipw_get_status_code(u16 status)
{
int i;
......@@ -4250,7 +4250,7 @@ static inline void ipw_rx_notification(struct ipw_priv *priv,
if (priv->
status & (STATUS_ASSOCIATED |
STATUS_AUTH)) {
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
struct notif_authenticate *auth
= &notif->u.auth;
IPW_DEBUG(IPW_DL_NOTIF |
......@@ -5827,7 +5827,7 @@ static void ipw_bg_adhoc_check(void *data)
up(&priv->sem);
}
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
static void ipw_debug_config(struct ipw_priv *priv)
{
IPW_DEBUG_INFO("Scan completed, no valid APs matched "
......@@ -7814,7 +7814,7 @@ static void ipw_rx(struct ipw_priv *priv)
while (i != r) {
rxb = priv->rxq->queue[i];
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
if (unlikely(rxb == NULL)) {
printk(KERN_CRIT "Queue not allocated!\n");
break;
......@@ -10955,7 +10955,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
priv->net_dev = net_dev;
priv->pci_dev = pdev;
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
ipw_debug_level = debug;
#endif
spin_lock_init(&priv->lock);
......
......@@ -1301,14 +1301,14 @@ struct ipw_priv {
/* debug macros */
#ifdef CONFIG_IPW_DEBUG
#ifdef CONFIG_IPW2200_DEBUG
#define IPW_DEBUG(level, fmt, args...) \
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
#else
#define IPW_DEBUG(level, fmt, args...) do {} while (0)
#endif /* CONFIG_IPW_DEBUG */
#endif /* CONFIG_IPW2200_DEBUG */
/*
* To use the debug system;
......@@ -1332,7 +1332,7 @@ do { if (ipw_debug_level & (level)) \
* you simply need to add your entry to the ipw_debug_levels array.
*
* If you do not see debug_level in /proc/net/ipw then you do not have
* CONFIG_IPW_DEBUG defined in your kernel configuration
* CONFIG_IPW2200_DEBUG defined in your kernel configuration
*
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册