Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits)
  sh_mobile_meram: Safely disable MERAM operation when not initialized
  video: mb862xxfb: add support for L1 displaying
  video: mb862xx: add support for controller's I2C bus adapter
  video: mb862xxfb: relocate register space to get contiguous vram
  video: mb862xxfb: use pre-initialized configuration for PCI GDCs
  video: mb862xxfb: correct fix.smem_len field initialization
  video: s3c-fb: correct transparency checking in 32bpp
  video: s3c-fb: add gpio setup function to resume function
  fbdev/amifb: Remove superfluous alignment of frame buffer memory
  fbdev/amifb: Do not call panic() if there's not enough Chip RAM
  fbdev/amifb: Correct check for video memory size
  video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME
  video: s3c-fb: add window variant information for S5P
  video: s3c-fb: add additional validate bpps
  video: s3c-fb: correct window osd size offset values
  udlfb: include prefetch.h explicitly
  drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region
  drivers/video/sm501fb.c: Convert release_resource to release_mem_region
  drivers/video: Convert release_resource to release_mem_region
  video, udlfb: Fix two build warnings about 'ignoring return value'
  ...

arch/arm/mach-omap2/board-3430sdp.c

@@ -37,8 +37,8 @@
 #include <plat/common.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/gpmc-smc91x.h>
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -36,7 +36,7 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -680,6 +680,15 @@ static struct omap_dss_device sdp4430_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.clocks	= {
+		.dispc	= {
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+		.hdmi	= {
+			.regn	= 15,
+			.regm2	= 1,
+		},
+	},
 	.platform_enable = sdp4430_panel_enable_hdmi,
 	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,

arch/arm/mach-omap2/board-am3517evm.c

@@ -34,8 +34,8 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "control.h"

arch/arm/mach-omap2/board-cm-t35.c

@@ -45,8 +45,8 @@
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -45,8 +45,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -31,8 +31,8 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/onenand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3beagle.c

@@ -41,8 +41,8 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -44,8 +44,8 @@
 #include <plat/usb.h>
 #include <plat/common.h>
 #include <plat/mcspi.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -46,7 +46,7 @@
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/nand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3stalker.c

@@ -39,8 +39,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-omap4panda.c

@@ -34,13 +34,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include "timer-gp.h"
 
 #include "hsmmc.h"

arch/arm/mach-omap2/board-overo.c

@@ -43,8 +43,8 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-rx51-video.c

@@ -15,7 +15,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
 #include <asm/mach-types.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/vram.h>
 #include <plat/mcspi.h>
 

arch/arm/mach-omap2/board-zoom-display.c

@@ -15,7 +15,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
 #include <plat/mcspi.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55

arch/arm/mach-omap2/display.c

@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
@@ -56,37 +56,58 @@ static bool opt_clock_available(const char *clk_role)
 	return false;
 }
 
+struct omap_dss_hwmod_data {
+	const char *oh_name;
+	const char *dev_name;
+	const int id;
+};
+
+static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+};
+
+static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+	{ "dss_dsi1", "omapdss_dsi1", -1 },
+};
+
+static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+	{ "dss_dsi1", "omapdss_dsi1", -1 },
+	{ "dss_dsi2", "omapdss_dsi2", -1 },
+	{ "dss_hdmi", "omapdss_hdmi", -1 },
+};
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
 	struct omap_hwmod *oh;
 	struct omap_device *od;
-	int i;
+	int i, oh_count;
 	struct omap_display_platform_data pdata;
-
-	/*
-	 * omap: valid DSS hwmod names
-	 * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc
-	 * omap3,4: dss_dsi1
-	 * omap4: dss_dsi2, dss_hdmi
-	 */
-	char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc",
-		"dss_dsi1", "dss_dsi2", "dss_hdmi" };
-	char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi",
-		"omapdss_venc", "omapdss_dsi1", "omapdss_dsi2",
-		"omapdss_hdmi" };
-	int oh_count;
+	const struct omap_dss_hwmod_data *curr_dss_hwmod;
 
 	memset(&pdata, 0, sizeof(pdata));
 
-	if (cpu_is_omap24xx())
-		oh_count = ARRAY_SIZE(oh_name) - 3;
-		/* last 3 hwmod dev in oh_name are not available for omap2 */
-	else if (cpu_is_omap44xx())
-		oh_count = ARRAY_SIZE(oh_name);
-	else
-		oh_count = ARRAY_SIZE(oh_name) - 2;
-		/* last 2 hwmod dev in oh_name are not available for omap3 */
+	if (cpu_is_omap24xx()) {
+		curr_dss_hwmod = omap2_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
+	} else if (cpu_is_omap34xx()) {
+		curr_dss_hwmod = omap3_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap3_dss_hwmod_data);
+	} else {
+		curr_dss_hwmod = omap4_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
+	}
 
 	/* opt_clks are always associated with dss hwmod */
 	oh_core = omap_hwmod_lookup("dss_core");
@@ -100,19 +121,21 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	pdata.opt_clock_available = opt_clock_available;
 
 	for (i = 0; i < oh_count; i++) {
-		oh = omap_hwmod_lookup(oh_name[i]);
+		oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
 		if (!oh) {
-			pr_err("Could not look up %s\n", oh_name[i]);
+			pr_err("Could not look up %s\n",
+				curr_dss_hwmod[i].oh_name);
 			return -ENODEV;
 		}
 
-		od = omap_device_build(dev_name[i], -1, oh, &pdata,
+		od = omap_device_build(curr_dss_hwmod[i].dev_name,
+				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
 				omap_dss_latency,
 				ARRAY_SIZE(omap_dss_latency), 0);
 
 		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
-				oh_name[i]))
+				curr_dss_hwmod[i].oh_name))
 			return -ENODEV;
 	}
 	omap_display_device.dev.platform_data = board_data;

arch/arm/mach-omap2/include/mach/board-zoom.h

 /*
  * Defines for zoom boards
  */
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define ZOOM_NAND_CS    0
 

drivers/media/video/omap/omap_vout.c

@@ -47,7 +47,7 @@
 #include <plat/dma.h>
 #include <plat/vram.h>
 #include <plat/vrfb.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include "omap_voutlib.h"
 #include "omap_voutdef.h"

drivers/media/video/omap/omap_voutdef.h

@@ -11,7 +11,7 @@
 #ifndef OMAP_VOUTDEF_H
 #define OMAP_VOUTDEF_H
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define YUYV_BPP        2
 #define RGB565_BPP      2

drivers/video/Kconfig

@@ -1460,6 +1460,14 @@ config FB_S3
 	---help---
 	  Driver for graphics boards with S3 Trio / S3 Virge chip.
 
+config FB_S3_DDC
+	bool "DDC for S3 support"
+	depends on FB_S3
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your S3 graphics card.
+
 config FB_SAVAGE
 	tristate "S3 Savage support"
 	depends on FB && PCI && EXPERIMENTAL
@@ -1983,6 +1991,18 @@ config FB_SH_MOBILE_HDMI
 	---help---
 	  Driver for the on-chip SH-Mobile HDMI controller.
 
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support for LCDC"
+	depends on FB_SH_MOBILE_LCDC
+	default y
+	---help---
+	  Enable MERAM support for the SH-Mobile LCD controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
 config FB_TMIO
 	tristate "Toshiba Mobile IO FrameBuffer support"
 	depends on FB && MFD_CORE
@@ -2246,29 +2266,43 @@ config FB_METRONOME
 config FB_MB862XX
 	tristate "Fujitsu MB862xx GDC support"
 	depends on FB
+	depends on PCI || (OF && PPC)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	---help---
 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
 
+choice
+	prompt "GDC variant"
+	depends on FB_MB862XX
+
 config FB_MB862XX_PCI_GDC
 	bool "Carmine/Coral-P(A) GDC"
-	depends on PCI && FB_MB862XX
+	depends on PCI
 	---help---
 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
 	  PCI graphics controller devices.
 
 config FB_MB862XX_LIME
 	bool "Lime GDC"
-	depends on FB_MB862XX
-	depends on OF && !FB_MB862XX_PCI_GDC
-	depends on PPC
+	depends on OF && PPC
 	select FB_FOREIGN_ENDIAN
 	select FB_LITTLE_ENDIAN
 	---help---
 	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
 
+endchoice
+
+config FB_MB862XX_I2C
+	bool "Support I2C bus on MB862XX GDC"
+	depends on FB_MB862XX && I2C
+	default y
+	help
+	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+	  driver to support accessing I2C devices on controller's I2C bus.
+	  These are usually some video decoder chips.
+
 config FB_EP93XX
 	tristate "EP93XX frame buffer support"
 	depends on FB && ARCH_EP93XX

drivers/video/Makefile

@@ -130,6 +130,7 @@ obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-y                             += omap2/

drivers/video/amifb.c

@@ -2224,22 +2224,23 @@ static int amifb_ioctl(struct fb_info *info,
 	 * Allocate, Clear and Align a Block of Chip Memory
 	 */
 
-static u_long unaligned_chipptr = 0;
+static void *aligned_chipptr;
 
 static inline u_long __init chipalloc(u_long size)
 {
-	size += PAGE_SIZE-1;
-	if (!(unaligned_chipptr = (u_long)amiga_chip_alloc(size,
-							   "amifb [RAM]")))
-		panic("No Chip RAM for frame buffer");
-	memset((void *)unaligned_chipptr, 0, size);
-	return PAGE_ALIGN(unaligned_chipptr);
+	aligned_chipptr = amiga_chip_alloc(size, "amifb [RAM]");
+	if (!aligned_chipptr) {
+		pr_err("amifb: No Chip RAM for frame buffer");
+		return 0;
+	}
+	memset(aligned_chipptr, 0, size);
+	return (u_long)aligned_chipptr;
 }
 
 static inline void chipfree(void)
 {
-	if (unaligned_chipptr)
-		amiga_chip_free((void *)unaligned_chipptr);
+	if (aligned_chipptr)
+		amiga_chip_free(aligned_chipptr);
 }
 
 
@@ -2295,7 +2296,7 @@ static int __init amifb_probe(struct platform_device *pdev)
 			    defmode = amiga_vblank == 50 ? DEFMODE_PAL
 							 : DEFMODE_NTSC;
 			if (amiga_chip_avail()-CHIPRAM_SAFETY_LIMIT >
-			    VIDEOMEMSIZE_ECS_1M)
+			    VIDEOMEMSIZE_ECS_2M)
 				fb_info.fix.smem_len = VIDEOMEMSIZE_ECS_2M;
 			else
 				fb_info.fix.smem_len = VIDEOMEMSIZE_ECS_1M;
@@ -2312,7 +2313,7 @@ static int __init amifb_probe(struct platform_device *pdev)
 			maxfmode = TAG_FMODE_4;
 			defmode = DEFMODE_AGA;
 			if (amiga_chip_avail()-CHIPRAM_SAFETY_LIMIT >
-			    VIDEOMEMSIZE_AGA_1M)
+			    VIDEOMEMSIZE_AGA_2M)
 				fb_info.fix.smem_len = VIDEOMEMSIZE_AGA_2M;
 			else
 				fb_info.fix.smem_len = VIDEOMEMSIZE_AGA_1M;
@@ -2385,6 +2386,10 @@ static int __init amifb_probe(struct platform_device *pdev)
 	                    DUMMYSPRITEMEMSIZE+
 	                    COPINITSIZE+
 	                    4*COPLISTSIZE);
+	if (!chipptr) {
+		err = -ENOMEM;
+		goto amifb_error;
+	}
 
 	assignchunk(videomemory, u_long, chipptr, fb_info.fix.smem_len);
 	assignchunk(spritememory, u_long, chipptr, SPRITEMEMSIZE);

drivers/video/da8xx-fb.c

@@ -899,7 +899,7 @@ static struct fb_ops da8xx_fb_ops = {
 	.fb_blank = cfb_blank,
 };
 
-static int __init fb_probe(struct platform_device *device)
+static int __devinit fb_probe(struct platform_device *device)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata =
 						device->dev.platform_data;
@@ -1165,7 +1165,7 @@ static int fb_resume(struct platform_device *dev)
 
 static struct platform_driver da8xx_fb_driver = {
 	.probe = fb_probe,
-	.remove = fb_remove,
+	.remove = __devexit_p(fb_remove),
 	.suspend = fb_suspend,
 	.resume = fb_resume,
 	.driver = {

drivers/video/efifb.c

@@ -242,9 +242,9 @@ static int set_system(const struct dmi_system_id *id)
 		return 0;
 	}
 
-	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
+	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at 0x%08x "
 			 "(%dx%d, stride %d)\n", id->ident,
-			 (void *)screen_info.lfb_base, screen_info.lfb_width,
+			 screen_info.lfb_base, screen_info.lfb_width,
 			 screen_info.lfb_height, screen_info.lfb_linelength);
 
 

drivers/video/mb862xx/Makefile

@@ -2,4 +2,7 @@
 # Makefile for the MB862xx framebuffer driver
 #
 
-obj-$(CONFIG_FB_MB862XX)	:= mb862xxfb.o mb862xxfb_accel.o
+obj-$(CONFIG_FB_MB862XX) += mb862xxfb.o
+
+mb862xxfb-y := mb862xxfbdrv.o mb862xxfb_accel.o
+mb862xxfb-$(CONFIG_FB_MB862XX_I2C) += mb862xx-i2c.o

drivers/video/mb862xx/mb862xx-i2c.c

+/*
+ * Coral-P(A)/Lime I2C adapter driver
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include "mb862xxfb.h"
+#include "mb862xx_reg.h"
+
+static int mb862xx_i2c_wait_event(struct i2c_adapter *adap)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+	u32 reg;
+
+	do {
+		udelay(1);
+		reg = inreg(i2c, GC_I2C_BCR);
+		if (reg & (I2C_INT | I2C_BER))
+			break;
+	} while (1);
+
+	return (reg & I2C_BER) ? 0 : 1;
+}
+
+static int mb862xx_i2c_do_address(struct i2c_adapter *adap, int addr)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+
+	outreg(i2c, GC_I2C_DAR, addr);
+	outreg(i2c, GC_I2C_CCR, I2C_CLOCK_AND_ENABLE);
+	outreg(i2c, GC_I2C_BCR, par->i2c_rs ? I2C_REPEATED_START : I2C_START);
+	if (!mb862xx_i2c_wait_event(adap))
+		return -EIO;
+	par->i2c_rs = !(inreg(i2c, GC_I2C_BSR) & I2C_LRB);
+	return par->i2c_rs;
+}
+
+static int mb862xx_i2c_write_byte(struct i2c_adapter *adap, u8 byte)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+
+	outreg(i2c, GC_I2C_DAR, byte);
+	outreg(i2c, GC_I2C_BCR, I2C_START);
+	if (!mb862xx_i2c_wait_event(adap))
+		return -EIO;
+	return !(inreg(i2c, GC_I2C_BSR) & I2C_LRB);
+}
+
+static int mb862xx_i2c_read_byte(struct i2c_adapter *adap, u8 *byte, int last)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+
+	outreg(i2c, GC_I2C_BCR, I2C_START | (last ? 0 : I2C_ACK));
+	if (!mb862xx_i2c_wait_event(adap))
+		return 0;
+	*byte = inreg(i2c, GC_I2C_DAR);
+	return 1;
+}
+
+void mb862xx_i2c_stop(struct i2c_adapter *adap)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+
+	outreg(i2c, GC_I2C_BCR, I2C_STOP);
+	outreg(i2c, GC_I2C_CCR, I2C_DISABLE);
+	par->i2c_rs = 0;
+}
+
+static int mb862xx_i2c_read(struct i2c_adapter *adap, struct i2c_msg *m)
+{
+	int i, ret = 0;
+	int last = m->len - 1;
+
+	for (i = 0; i < m->len; i++) {
+		if (!mb862xx_i2c_read_byte(adap, &m->buf[i], i == last)) {
+			ret = -EIO;
+			break;
+		}
+	}
+	return ret;
+}
+
+static int mb862xx_i2c_write(struct i2c_adapter *adap, struct i2c_msg *m)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < m->len; i++) {
+		if (!mb862xx_i2c_write_byte(adap, m->buf[i])) {
+			ret = -EIO;
+			break;
+		}
+	}
+	return ret;
+}
+
+static int mb862xx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num)
+{
+	struct mb862xxfb_par *par = adap->algo_data;
+	struct i2c_msg *m;
+	int addr;
+	int i = 0, err = 0;
+
+	dev_dbg(par->dev, "%s: %d msgs\n", __func__, num);
+
+	for (i = 0; i < num; i++) {
+		m = &msgs[i];
+		if (!m->len) {
+			dev_dbg(par->dev, "%s: null msgs\n", __func__);
+			continue;
+		}
+		addr = m->addr;
+		if (m->flags & I2C_M_RD)
+			addr |= 1;
+
+		err = mb862xx_i2c_do_address(adap, addr);
+		if (err < 0)
+			break;
+		if (m->flags & I2C_M_RD)
+			err = mb862xx_i2c_read(adap, m);
+		else
+			err = mb862xx_i2c_write(adap, m);
+	}
+
+	if (i)
+		mb862xx_i2c_stop(adap);
+
+	return (err < 0) ? err : i;
+}
+
+static u32 mb862xx_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm mb862xx_algo = {
+	.master_xfer	= mb862xx_xfer,
+	.functionality	= mb862xx_func,
+};
+
+static struct i2c_adapter mb862xx_i2c_adapter = {
+	.name		= "MB862xx I2C adapter",
+	.algo		= &mb862xx_algo,
+	.owner		= THIS_MODULE,
+};
+
+int mb862xx_i2c_init(struct mb862xxfb_par *par)
+{
+	int ret;
+
+	mb862xx_i2c_adapter.algo_data = par;
+	par->adap = &mb862xx_i2c_adapter;
+
+	ret = i2c_add_adapter(par->adap);
+	if (ret < 0) {
+		dev_err(par->dev, "failed to add %s\n",
+			mb862xx_i2c_adapter.name);
+	}
+	return ret;
+}
+
+void mb862xx_i2c_exit(struct mb862xxfb_par *par)
+{
+	if (par->adap) {
+		i2c_del_adapter(par->adap);
+		par->adap = NULL;
+	}
+}

drivers/video/mb862xx/mb862xx_reg.h

@@ -5,11 +5,8 @@
 #ifndef _MB862XX_REG_H
 #define _MB862XX_REG_H
 
-#ifdef MB862XX_MMIO_BOTTOM
-#define MB862XX_MMIO_BASE	0x03fc0000
-#else
 #define MB862XX_MMIO_BASE	0x01fc0000
-#endif
+#define MB862XX_MMIO_HIGH_BASE	0x03fc0000
 #define MB862XX_I2C_BASE	0x0000c000
 #define MB862XX_DISP_BASE	0x00010000
 #define MB862XX_CAP_BASE	0x00018000
@@ -23,6 +20,7 @@
 #define GC_IMASK		0x00000024
 #define GC_SRST			0x0000002c
 #define GC_CCF			0x00000038
+#define GC_RSW			0x0000005c
 #define GC_CID			0x000000f0
 #define GC_REVISION		0x00000084
 
@@ -53,10 +51,16 @@
 #define GC_L0OA0		0x00000024
 #define GC_L0DA0		0x00000028
 #define GC_L0DY_L0DX		0x0000002c
+#define GC_L1M			0x00000030
+#define GC_L1DA			0x00000034
 #define GC_DCM1			0x00000100
 #define GC_L0EM			0x00000110
 #define GC_L0WY_L0WX		0x00000114
 #define GC_L0WH_L0WW		0x00000118
+#define GC_L1EM			0x00000120
+#define GC_L1WY_L1WX		0x00000124
+#define GC_L1WH_L1WW		0x00000128
+#define GC_DLS			0x00000180
 #define GC_DCM2			0x00000104
 #define GC_DCM3			0x00000108
 #define GC_CPM_CUTC		0x000000a0
@@ -68,6 +72,11 @@
 
 #define GC_CPM_CEN0		0x00100000
 #define GC_CPM_CEN1		0x00200000
+#define GC_DCM1_DEN		0x80000000
+#define GC_DCM1_L1E		0x00020000
+#define GC_L1M_16		0x80000000
+#define GC_L1M_YC		0x40000000
+#define GC_L1M_CS		0x20000000
 
 #define GC_DCM01_ESY		0x00000004
 #define GC_DCM01_SC		0x00003f00
@@ -79,9 +88,50 @@
 #define GC_L0M_L0C_16		0x80000000
 #define GC_L0EM_L0EC_24		0x40000000
 #define GC_L0M_L0W_UNIT		64
+#define GC_L1EM_DM		0x02000000
 
 #define GC_DISP_REFCLK_400	400
 
+/* I2C */
+#define GC_I2C_BSR		0x00000000	/* BSR */
+#define GC_I2C_BCR		0x00000004	/* BCR */
+#define GC_I2C_CCR		0x00000008	/* CCR */
+#define GC_I2C_ADR		0x0000000C	/* ADR */
+#define GC_I2C_DAR		0x00000010	/* DAR */
+
+#define I2C_DISABLE		0x00000000
+#define I2C_STOP		0x00000000
+#define I2C_START		0x00000010
+#define I2C_REPEATED_START	0x00000030
+#define I2C_CLOCK_AND_ENABLE	0x0000003f
+#define I2C_READY		0x01
+#define I2C_INT			0x01
+#define I2C_INTE		0x02
+#define I2C_ACK			0x08
+#define I2C_BER			0x80
+#define I2C_BEIE		0x40
+#define I2C_TRX			0x80
+#define I2C_LRB			0x10
+
+/* Capture registers and bits */
+#define GC_CAP_VCM		0x00000000
+#define GC_CAP_CSC		0x00000004
+#define GC_CAP_VCS		0x00000008
+#define GC_CAP_CBM		0x00000010
+#define GC_CAP_CBOA		0x00000014
+#define GC_CAP_CBLA		0x00000018
+#define GC_CAP_IMG_START	0x0000001C
+#define GC_CAP_IMG_END		0x00000020
+#define GC_CAP_CMSS		0x00000048
+#define GC_CAP_CMDS		0x0000004C
+
+#define GC_VCM_VIE		0x80000000
+#define GC_VCM_CM		0x03000000
+#define GC_VCM_VS_PAL		0x00000002
+#define GC_CBM_OO		0x80000000
+#define GC_CBM_HRV		0x00000010
+#define GC_CBM_CBST		0x00000001
+
 /* Carmine specific */
 #define MB86297_DRAW_BASE		0x00020000
 #define MB86297_DISP0_BASE		0x00100000

drivers/video/mb862xx/mb862xxfb.h

 #ifndef __MB862XX_H__
 #define __MB862XX_H__
 
+struct mb862xx_l1_cfg {
+	unsigned short sx;
+	unsigned short sy;
+	unsigned short sw;
+	unsigned short sh;
+	unsigned short dx;
+	unsigned short dy;
+	unsigned short dw;
+	unsigned short dh;
+	int mirror;
+};
+
+#define MB862XX_BASE		'M'
+#define MB862XX_L1_GET_CFG	_IOR(MB862XX_BASE, 0, struct mb862xx_l1_cfg*)
+#define MB862XX_L1_SET_CFG	_IOW(MB862XX_BASE, 1, struct mb862xx_l1_cfg*)
+#define MB862XX_L1_ENABLE	_IOW(MB862XX_BASE, 2, int)
+#define MB862XX_L1_CAP_CTL	_IOW(MB862XX_BASE, 3, int)
+
+#ifdef __KERNEL__
+
 #define PCI_VENDOR_ID_FUJITSU_LIMITED	0x10cf
 #define PCI_DEVICE_ID_FUJITSU_CORALP	0x2019
 #define PCI_DEVICE_ID_FUJITSU_CORALPA	0x201e
@@ -38,6 +58,8 @@ struct mb862xxfb_par {
 	void __iomem		*mmio_base;	/* remapped registers */
 	size_t			mapped_vram;	/* length of remapped vram */
 	size_t			mmio_len;	/* length of register region */
+	unsigned long		cap_buf;	/* capture buffers offset */
+	size_t			cap_len;	/* length of capture buffers */
 
 	void __iomem		*host;		/* relocatable reg. bases */
 	void __iomem		*i2c;
@@ -57,11 +79,23 @@ struct mb862xxfb_par {
 	unsigned int		refclk;		/* disp. reference clock */
 	struct mb862xx_gc_mode	*gc_mode;	/* GDC mode init data */
 	int			pre_init;	/* don't init display if 1 */
+	struct i2c_adapter	*adap;		/* GDC I2C bus adapter */
+	int			i2c_rs;
+
+	struct mb862xx_l1_cfg	l1_cfg;
+	int			l1_stride;
 
 	u32			pseudo_palette[16];
 };
 
 extern void mb862xxfb_init_accel(struct fb_info *info, int xres);
+#ifdef CONFIG_FB_MB862XX_I2C
+extern int mb862xx_i2c_init(struct mb862xxfb_par *par);
+extern void mb862xx_i2c_exit(struct mb862xxfb_par *par);
+#else
+static inline int mb862xx_i2c_init(struct mb862xxfb_par *par) { return 0; }
+static inline void mb862xx_i2c_exit(struct mb862xxfb_par *par) { }
+#endif
 
 #if defined(CONFIG_FB_MB862XX_LIME) && defined(CONFIG_FB_MB862XX_PCI_GDC)
 #error	"Select Lime GDC or CoralP/Carmine support, but not both together"
@@ -82,4 +116,6 @@ extern void mb862xxfb_init_accel(struct fb_info *info, int xres);
 
 #define pack(a, b)	(((a) << 16) | (b))
 
+#endif /* __KERNEL__ */
+
 #endif

drivers/video/mb862xx/mb862xxfb.c → drivers/video/mb862xx/mb862xxfbdrv.c

@@ -27,7 +27,7 @@
 
 #define NR_PALETTE		256
 #define MB862XX_MEM_SIZE	0x1000000
-#define CORALP_MEM_SIZE		0x4000000
+#define CORALP_MEM_SIZE		0x2000000
 #define CARMINE_MEM_SIZE	0x8000000
 #define DRV_NAME		"mb862xxfb"
 
@@ -309,6 +309,97 @@ static int mb862xxfb_blank(int mode, struct fb_info *fbi)
 	return 0;
 }
 
+static int mb862xxfb_ioctl(struct fb_info *fbi, unsigned int cmd,
+			   unsigned long arg)
+{
+	struct mb862xxfb_par *par = fbi->par;
+	struct mb862xx_l1_cfg *l1_cfg = &par->l1_cfg;
+	void __user *argp = (void __user *)arg;
+	int *enable;
+	u32 l1em = 0;
+
+	switch (cmd) {
+	case MB862XX_L1_GET_CFG:
+		if (copy_to_user(argp, l1_cfg, sizeof(*l1_cfg)))
+			return -EFAULT;
+		break;
+	case MB862XX_L1_SET_CFG:
+		if (copy_from_user(l1_cfg, argp, sizeof(*l1_cfg)))
+			return -EFAULT;
+		if ((l1_cfg->sw >= l1_cfg->dw) && (l1_cfg->sh >= l1_cfg->dh)) {
+			/* downscaling */
+			outreg(cap, GC_CAP_CSC,
+				pack((l1_cfg->sh << 11) / l1_cfg->dh,
+				     (l1_cfg->sw << 11) / l1_cfg->dw));
+			l1em = inreg(disp, GC_L1EM);
+			l1em &= ~GC_L1EM_DM;
+		} else if ((l1_cfg->sw <= l1_cfg->dw) &&
+			   (l1_cfg->sh <= l1_cfg->dh)) {
+			/* upscaling */
+			outreg(cap, GC_CAP_CSC,
+				pack((l1_cfg->sh << 11) / l1_cfg->dh,
+				     (l1_cfg->sw << 11) / l1_cfg->dw));
+			outreg(cap, GC_CAP_CMSS,
+				pack(l1_cfg->sw >> 1, l1_cfg->sh));
+			outreg(cap, GC_CAP_CMDS,
+				pack(l1_cfg->dw >> 1, l1_cfg->dh));
+			l1em = inreg(disp, GC_L1EM);
+			l1em |= GC_L1EM_DM;
+		}
+
+		if (l1_cfg->mirror) {
+			outreg(cap, GC_CAP_CBM,
+				inreg(cap, GC_CAP_CBM) | GC_CBM_HRV);
+			l1em |= l1_cfg->dw * 2 - 8;
+		} else {
+			outreg(cap, GC_CAP_CBM,
+				inreg(cap, GC_CAP_CBM) & ~GC_CBM_HRV);
+			l1em &= 0xffff0000;
+		}
+		outreg(disp, GC_L1EM, l1em);
+		break;
+	case MB862XX_L1_ENABLE:
+		enable = (int *)arg;
+		if (*enable) {
+			outreg(disp, GC_L1DA, par->cap_buf);
+			outreg(cap, GC_CAP_IMG_START,
+				pack(l1_cfg->sy >> 1, l1_cfg->sx));
+			outreg(cap, GC_CAP_IMG_END,
+				pack(l1_cfg->sh, l1_cfg->sw));
+			outreg(disp, GC_L1M, GC_L1M_16 | GC_L1M_YC | GC_L1M_CS |
+					     (par->l1_stride << 16));
+			outreg(disp, GC_L1WY_L1WX,
+				pack(l1_cfg->dy, l1_cfg->dx));
+			outreg(disp, GC_L1WH_L1WW,
+				pack(l1_cfg->dh - 1, l1_cfg->dw));
+			outreg(disp, GC_DLS, 1);
+			outreg(cap, GC_CAP_VCM,
+				GC_VCM_VIE | GC_VCM_CM | GC_VCM_VS_PAL);
+			outreg(disp, GC_DCM1, inreg(disp, GC_DCM1) |
+					      GC_DCM1_DEN | GC_DCM1_L1E);
+		} else {
+			outreg(cap, GC_CAP_VCM,
+				inreg(cap, GC_CAP_VCM) & ~GC_VCM_VIE);
+			outreg(disp, GC_DCM1,
+				inreg(disp, GC_DCM1) & ~GC_DCM1_L1E);
+		}
+		break;
+	case MB862XX_L1_CAP_CTL:
+		enable = (int *)arg;
+		if (*enable) {
+			outreg(cap, GC_CAP_VCM,
+				inreg(cap, GC_CAP_VCM) | GC_VCM_VIE);
+		} else {
+			outreg(cap, GC_CAP_VCM,
+				inreg(cap, GC_CAP_VCM) & ~GC_VCM_VIE);
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /* framebuffer ops */
 static struct fb_ops mb862xxfb_ops = {
 	.owner		= THIS_MODULE,
@@ -320,6 +411,7 @@ static struct fb_ops mb862xxfb_ops = {
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
+	.fb_ioctl	= mb862xxfb_ioctl,
 };
 
 /* initialize fb_info data */
@@ -328,6 +420,7 @@ static int mb862xxfb_init_fbinfo(struct fb_info *fbi)
 	struct mb862xxfb_par *par = fbi->par;
 	struct mb862xx_gc_mode *mode = par->gc_mode;
 	unsigned long reg;
+	int stride;
 
 	fbi->fbops = &mb862xxfb_ops;
 	fbi->pseudo_palette = par->pseudo_palette;
@@ -336,7 +429,6 @@ static int mb862xxfb_init_fbinfo(struct fb_info *fbi)
 
 	strcpy(fbi->fix.id, DRV_NAME);
 	fbi->fix.smem_start = (unsigned long)par->fb_base_phys;
-	fbi->fix.smem_len = par->mapped_vram;
 	fbi->fix.mmio_start = (unsigned long)par->mmio_base_phys;
 	fbi->fix.mmio_len = par->mmio_len;
 	fbi->fix.accel = FB_ACCEL_NONE;
@@ -420,6 +512,28 @@ static int mb862xxfb_init_fbinfo(struct fb_info *fbi)
 			 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 	fbi->fix.line_length = (fbi->var.xres_virtual *
 				fbi->var.bits_per_pixel) / 8;
+	fbi->fix.smem_len = fbi->fix.line_length * fbi->var.yres_virtual;
+
+	/*
+	 * reserve space for capture buffers and two cursors
+	 * at the end of vram: 720x576 * 2 * 2.2 + 64x64 * 16.
+	 */
+	par->cap_buf = par->mapped_vram - 0x1bd800 - 0x10000;
+	par->cap_len = 0x1bd800;
+	par->l1_cfg.sx = 0;
+	par->l1_cfg.sy = 0;
+	par->l1_cfg.sw = 720;
+	par->l1_cfg.sh = 576;
+	par->l1_cfg.dx = 0;
+	par->l1_cfg.dy = 0;
+	par->l1_cfg.dw = 720;
+	par->l1_cfg.dh = 576;
+	stride = par->l1_cfg.sw * (fbi->var.bits_per_pixel / 8);
+	par->l1_stride = stride / 64 + ((stride % 64) ? 1 : 0);
+	outreg(cap, GC_CAP_CBM, GC_CBM_OO | GC_CBM_CBST |
+				(par->l1_stride << 16));
+	outreg(cap, GC_CAP_CBOA, par->cap_buf);
+	outreg(cap, GC_CAP_CBLA, par->cap_buf + par->cap_len);
 	return 0;
 }
 
@@ -742,22 +856,38 @@ static int coralp_init(struct mb862xxfb_par *par)
 
 	par->refclk = GC_DISP_REFCLK_400;
 
+	if (par->mapped_vram >= 0x2000000) {
+		/* relocate gdc registers space */
+		writel(1, par->fb_base + MB862XX_MMIO_BASE + GC_RSW);
+		udelay(1); /* wait at least 20 bus cycles */
+	}
+
 	ver = inreg(host, GC_CID);
 	cn = (ver & GC_CID_CNAME_MSK) >> 8;
 	ver = ver & GC_CID_VERSION_MSK;
 	if (cn == 3) {
+		unsigned long reg;
+
 		dev_info(par->dev, "Fujitsu Coral-%s GDC Rev.%d found\n",\
 			 (ver == 6) ? "P" : (ver == 8) ? "PA" : "?",
 			 par->pdev->revision);
-		outreg(host, GC_CCF, GC_CCF_CGE_166 | GC_CCF_COT_133);
-		udelay(200);
-		outreg(host, GC_MMR, GC_MMR_CORALP_EVB_VAL);
-		udelay(10);
+		reg = inreg(disp, GC_DCM1);
+		if (reg & GC_DCM01_DEN && reg & GC_DCM01_L0E)
+			par->pre_init = 1;
+
+		if (!par->pre_init) {
+			outreg(host, GC_CCF, GC_CCF_CGE_166 | GC_CCF_COT_133);
+			udelay(200);
+			outreg(host, GC_MMR, GC_MMR_CORALP_EVB_VAL);
+			udelay(10);
+		}
 		/* Clear interrupt status */
 		outreg(host, GC_IST, 0);
 	} else {
 		return -ENODEV;
 	}
+
+	mb862xx_i2c_init(par);
 	return 0;
 }
 
@@ -899,7 +1029,13 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev,
 	case PCI_DEVICE_ID_FUJITSU_CORALPA:
 		par->fb_base_phys = pci_resource_start(par->pdev, 0);
 		par->mapped_vram = CORALP_MEM_SIZE;
-		par->mmio_base_phys = par->fb_base_phys + MB862XX_MMIO_BASE;
+		if (par->mapped_vram >= 0x2000000) {
+			par->mmio_base_phys = par->fb_base_phys +
+					      MB862XX_MMIO_HIGH_BASE;
+		} else {
+			par->mmio_base_phys = par->fb_base_phys +
+					      MB862XX_MMIO_BASE;
+		}
 		par->mmio_len = MB862XX_MMIO_SIZE;
 		par->type = BT_CORALP;
 		break;
@@ -1009,6 +1145,8 @@ static void __devexit mb862xx_pci_remove(struct pci_dev *pdev)
 		outreg(host, GC_IMASK, 0);
 	}
 
+	mb862xx_i2c_exit(par);
+
 	device_remove_file(&pdev->dev, &dev_attr_dispregs);
 
 	pci_set_drvdata(pdev, NULL);

drivers/video/omap/dispc.c

@@ -922,14 +922,14 @@ static int get_dss_clocks(void)
 		return PTR_ERR(dispc.dss_ick);
 	}
 
-	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
+	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
 	if (IS_ERR(dispc.dss1_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(dispc.dss_ick);
 		return PTR_ERR(dispc.dss1_fck);
 	}
 
-	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_fck");
+	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
 	if (IS_ERR(dispc.dss_54m_fck)) {
 		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
 		clk_put(dispc.dss_ick);

drivers/video/omap/omapfb_main.c

@@ -90,7 +90,7 @@ static void omapdss_release(struct device *dev)
 
 /* dummy device for clocks */
 static struct platform_device omapdss_device = {
-	.name		= "omapdss",
+	.name		= "omapdss_dss",
 	.id		= -1,
 	.dev            = {
 		.release = omapdss_release,

drivers/video/omap/rfbi.c

@@ -90,7 +90,7 @@ static int rfbi_get_clocks(void)
 		return PTR_ERR(rfbi.dss_ick);
 	}
 
-	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
+	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
 	if (IS_ERR(rfbi.dss1_fck)) {
 		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
 		clk_put(rfbi.dss_ick);

drivers/video/omap2/Makefile

 obj-$(CONFIG_OMAP2_VRAM) += vram.o
 obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
 
-obj-y += dss/
-obj-y += omapfb/
+obj-$(CONFIG_OMAP2_DSS) += dss/
+obj-$(CONFIG_FB_OMAP2) += omapfb/
 obj-y += displays/

drivers/video/omap2/displays/Kconfig

@@ -3,6 +3,7 @@ menu "OMAP2/3 Display Device Drivers"
 
 config PANEL_GENERIC_DPI
         tristate "Generic DPI Panel"
+	depends on OMAP2_DSS_DPI
         help
 	  Generic DPI panel driver.
 	  Supports DVI output for Beagle and OMAP3 SDP.
@@ -11,20 +12,20 @@ config PANEL_GENERIC_DPI
 
 config PANEL_LGPHILIPS_LB035Q02
 	tristate "LG.Philips LB035Q02 LCD Panel"
-	depends on OMAP2_DSS && SPI
+	depends on OMAP2_DSS_DPI && SPI
 	help
 	  LCD Panel used on the Gumstix Overo Palo35
 
 config PANEL_SHARP_LS037V7DW01
         tristate "Sharp LS037V7DW01 LCD Panel"
-        depends on OMAP2_DSS
+        depends on OMAP2_DSS_DPI
         select BACKLIGHT_CLASS_DEVICE
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
 config PANEL_NEC_NL8048HL11_01B
 	tristate "NEC NL8048HL11-01B Panel"
-	depends on OMAP2_DSS
+	depends on OMAP2_DSS_DPI
 	help
 		This NEC NL8048HL11-01B panel is TFT LCD
 		used in the Zoom2/3/3630 sdp boards.
@@ -37,7 +38,7 @@ config PANEL_TAAL
 
 config PANEL_TPO_TD043MTEA1
         tristate "TPO TD043MTEA1 LCD Panel"
-        depends on OMAP2_DSS && SPI
+        depends on OMAP2_DSS_DPI && SPI
         help
           LCD Panel used in OMAP3 Pandora
 

drivers/video/omap2/displays/panel-acx565akm.c

@@ -30,7 +30,7 @@
 #include <linux/backlight.h>
 #include <linux/fb.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define MIPID_CMD_READ_DISP_ID		0x04
 #define MIPID_CMD_READ_RED		0x06

drivers/video/omap2/displays/panel-generic-dpi.c

@@ -33,8 +33,9 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <video/omapdss.h>
 
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 struct panel_config {
 	struct omap_video_timings timings;
@@ -181,6 +182,56 @@ static struct panel_config generic_dpi_panels[] = {
 		.power_off_delay	= 0,
 		.name			= "samsung_lte430wq_f0c",
 	},
+
+	/* Seiko 70WVW1TZ3Z3 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+
+			.pixel_clock	= 33000,
+
+			.hsw		= 128,
+			.hfp		= 10,
+			.hbp		= 10,
+
+			.vsw		= 2,
+			.vfp		= 4,
+			.vbp		= 11,
+		},
+		.acbi			= 0x0,
+		.acb			= 0x0,
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+						OMAP_DSS_LCD_IHS,
+		.power_on_delay		= 0,
+		.power_off_delay	= 0,
+		.name			= "seiko_70wvw1tz3",
+	},
+
+	/* Powertip PH480272T */
+	{
+		{
+			.x_res		= 480,
+			.y_res		= 272,
+
+			.pixel_clock	= 9000,
+
+			.hsw		= 40,
+			.hfp		= 2,
+			.hbp		= 2,
+
+			.vsw		= 10,
+			.vfp		= 2,
+			.vbp		= 2,
+		},
+		.acbi			= 0x0,
+		.acb			= 0x0,
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO,
+		.power_on_delay		= 0,
+		.power_off_delay	= 0,
+		.name			= "powertip_ph480272t",
+	},
 };
 
 struct panel_drv_data {
@@ -285,7 +336,7 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void generic_dpi_panel_remove(struct omap_dss_device *dssdev)
+static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
 
@@ -358,7 +409,7 @@ static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
 
 static struct omap_dss_driver dpi_driver = {
 	.probe		= generic_dpi_panel_probe,
-	.remove		= generic_dpi_panel_remove,
+	.remove		= __exit_p(generic_dpi_panel_remove),
 
 	.enable		= generic_dpi_panel_enable,
 	.disable	= generic_dpi_panel_disable,

drivers/video/omap2/displays/panel-lgphilips-lb035q02.c

@@ -21,7 +21,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 struct lb035q02_data {
 	struct mutex lock;

drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c

@@ -22,7 +22,7 @@
 #include <linux/backlight.h>
 #include <linux/fb.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define LCD_XRES		800
 #define LCD_YRES		480

drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c

@@ -25,7 +25,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 struct sharp_data {
 	struct backlight_device *bl;
@@ -120,7 +120,7 @@ static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
+static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
 {
 	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
 	struct backlight_device *bl = sd->bl;
@@ -205,7 +205,7 @@ static int sharp_ls_panel_resume(struct omap_dss_device *dssdev)
 
 static struct omap_dss_driver sharp_ls_driver = {
 	.probe		= sharp_ls_panel_probe,
-	.remove		= sharp_ls_panel_remove,
+	.remove		= __exit_p(sharp_ls_panel_remove),
 
 	.enable		= sharp_ls_panel_enable,
 	.disable	= sharp_ls_panel_disable,

drivers/video/omap2/displays/panel-tpo-td043mtea1.c

@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define TPO_R02_MODE(x)		((x) & 7)
 #define TPO_R02_MODE_800x480	7
@@ -144,13 +144,15 @@ static ssize_t tpo_td043_vmirror_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
-	long val;
+	int val;
 	int ret;
 
-	ret = strict_strtol(buf, 0, &val);
+	ret = kstrtoint(buf, 0, &val);
 	if (ret < 0)
 		return ret;
 
+	val = !!val;
+
 	ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val);
 	if (ret < 0)
 		return ret;
@@ -175,7 +177,7 @@ static ssize_t tpo_td043_mode_store(struct device *dev,
 	long val;
 	int ret;
 
-	ret = strict_strtol(buf, 0, &val);
+	ret = kstrtol(buf, 0, &val);
 	if (ret != 0 || val & ~7)
 		return -EINVAL;
 

drivers/video/omap2/dss/Kconfig

@@ -80,7 +80,7 @@ config OMAP2_DSS_SDI
 
 config OMAP2_DSS_DSI
 	bool "DSI support"
-	depends on ARCH_OMAP3
+	depends on ARCH_OMAP3 || ARCH_OMAP4
         default n
 	help
 	  MIPI DSI (Display Serial Interface) support.
@@ -90,14 +90,6 @@ config OMAP2_DSS_DSI
 
 	  See http://www.mipi.org/ for DSI spesifications.
 
-config OMAP2_DSS_USE_DSI_PLL
-	bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
-	default n
-	depends on OMAP2_DSS_DSI
-	help
-	  Use DSI PLL to generate pixel clock.  Currently only for DPI output.
-	  DSI PLL can be used to generate higher and more precise pixel clocks.
-
 config OMAP2_DSS_FAKE_VSYNC
 	bool "Fake VSYNC irq from manual update displays"
 	default n
@@ -125,4 +117,27 @@ config OMAP2_DSS_MIN_FCK_PER_PCK
 	  Max FCK is 173MHz, so this doesn't work if your PCK
 	  is very high.
 
+config OMAP2_DSS_SLEEP_BEFORE_RESET
+	bool "Sleep 50ms before DSS reset"
+	default y
+	help
+	  For some unknown reason we may get SYNC_LOST errors from the display
+	  subsystem at initialization time if we don't sleep before resetting
+	  the DSS. See the source (dss.c) for more comments.
+
+	  However, 50ms is quite long time to sleep, and with some
+	  configurations the SYNC_LOST may never happen, so the sleep can
+	  be disabled here.
+
+config OMAP2_DSS_SLEEP_AFTER_VENC_RESET
+	bool "Sleep 20ms after VENC reset"
+	default y
+	help
+	  There is a 20ms sleep after VENC reset which seemed to fix the
+	  reset. The reason for the bug is unclear, and it's also unclear
+	  on what platforms this happens.
+
+	  This option enables the sleep, and is enabled by default. You can
+	  disable the sleep if it doesn't cause problems on your platform.
+
 endif

drivers/video/omap2/dss/core.c

@@ -33,7 +33,7 @@
 #include <linux/device.h>
 #include <linux/regulator/consumer.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include "dss.h"
 #include "dss_features.h"
@@ -54,6 +54,9 @@ unsigned int dss_debug;
 module_param_named(debug, dss_debug, bool, 0644);
 #endif
 
+static int omap_dss_register_device(struct omap_dss_device *);
+static void omap_dss_unregister_device(struct omap_dss_device *);
+
 /* REGULATORS */
 
 struct regulator *dss_get_vdds_dsi(void)
@@ -124,8 +127,7 @@ static int dss_initialize_debugfs(void)
 #endif
 
 #if defined(CONFIG_OMAP2_DSS_DSI) && defined(CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS)
-	debugfs_create_file("dsi_irq", S_IRUGO, dss_debugfs_dir,
-			&dsi_dump_irqs, &dss_debug_fops);
+	dsi_create_debugfs_files_irq(dss_debugfs_dir, &dss_debug_fops);
 #endif
 
 	debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
@@ -137,8 +139,7 @@ static int dss_initialize_debugfs(void)
 			&rfbi_dump_regs, &dss_debug_fops);
 #endif
 #ifdef CONFIG_OMAP2_DSS_DSI
-	debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir,
-			&dsi_dump_regs, &dss_debug_fops);
+	dsi_create_debugfs_files_reg(dss_debugfs_dir, &dss_debug_fops);
 #endif
 #ifdef CONFIG_OMAP2_DSS_VENC
 	debugfs_create_file("venc", S_IRUGO, dss_debugfs_dir,
@@ -480,7 +481,7 @@ static void omap_dss_dev_release(struct device *dev)
 	reset_device(dev, 0);
 }
 
-int omap_dss_register_device(struct omap_dss_device *dssdev)
+static int omap_dss_register_device(struct omap_dss_device *dssdev)
 {
 	static int dev_num;
 
@@ -494,7 +495,7 @@ int omap_dss_register_device(struct omap_dss_device *dssdev)
 	return device_register(&dssdev->dev);
 }
 
-void omap_dss_unregister_device(struct omap_dss_device *dssdev)
+static void omap_dss_unregister_device(struct omap_dss_device *dssdev)
 {
 	device_unregister(&dssdev->dev);
 }

drivers/video/omap2/dss/dispc.h

+/*
+ * linux/drivers/video/omap2/dss/dispc.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Archit Taneja <archit@ti.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP2_DISPC_REG_H
+#define __OMAP2_DISPC_REG_H
+
+/* DISPC common registers */
+#define DISPC_REVISION			0x0000
+#define DISPC_SYSCONFIG			0x0010
+#define DISPC_SYSSTATUS			0x0014
+#define DISPC_IRQSTATUS			0x0018
+#define DISPC_IRQENABLE			0x001C
+#define DISPC_CONTROL			0x0040
+#define DISPC_CONFIG			0x0044
+#define DISPC_CAPABLE			0x0048
+#define DISPC_LINE_STATUS		0x005C
+#define DISPC_LINE_NUMBER		0x0060
+#define DISPC_GLOBAL_ALPHA		0x0074
+#define DISPC_CONTROL2			0x0238
+#define DISPC_CONFIG2			0x0620
+#define DISPC_DIVISOR			0x0804
+
+/* DISPC overlay registers */
+#define DISPC_OVL_BA0(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_BA0_OFFSET(n))
+#define DISPC_OVL_BA1(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_BA1_OFFSET(n))
+#define DISPC_OVL_BA0_UV(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_BA0_UV_OFFSET(n))
+#define DISPC_OVL_BA1_UV(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_BA1_UV_OFFSET(n))
+#define DISPC_OVL_POSITION(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_POS_OFFSET(n))
+#define DISPC_OVL_SIZE(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_SIZE_OFFSET(n))
+#define DISPC_OVL_ATTRIBUTES(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ATTR_OFFSET(n))
+#define DISPC_OVL_ATTRIBUTES2(n)	(DISPC_OVL_BASE(n) + \
+					DISPC_ATTR2_OFFSET(n))
+#define DISPC_OVL_FIFO_THRESHOLD(n)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIFO_THRESH_OFFSET(n))
+#define DISPC_OVL_FIFO_SIZE_STATUS(n)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIFO_SIZE_STATUS_OFFSET(n))
+#define DISPC_OVL_ROW_INC(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ROW_INC_OFFSET(n))
+#define DISPC_OVL_PIXEL_INC(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_PIX_INC_OFFSET(n))
+#define DISPC_OVL_WINDOW_SKIP(n)	(DISPC_OVL_BASE(n) + \
+					DISPC_WINDOW_SKIP_OFFSET(n))
+#define DISPC_OVL_TABLE_BA(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_TABLE_BA_OFFSET(n))
+#define DISPC_OVL_FIR(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_OFFSET(n))
+#define DISPC_OVL_FIR2(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_FIR2_OFFSET(n))
+#define DISPC_OVL_PICTURE_SIZE(n)	(DISPC_OVL_BASE(n) + \
+					DISPC_PIC_SIZE_OFFSET(n))
+#define DISPC_OVL_ACCU0(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ACCU0_OFFSET(n))
+#define DISPC_OVL_ACCU1(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ACCU1_OFFSET(n))
+#define DISPC_OVL_ACCU2_0(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ACCU2_0_OFFSET(n))
+#define DISPC_OVL_ACCU2_1(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_ACCU2_1_OFFSET(n))
+#define DISPC_OVL_FIR_COEF_H(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_H_OFFSET(n, i))
+#define DISPC_OVL_FIR_COEF_HV(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_HV_OFFSET(n, i))
+#define DISPC_OVL_FIR_COEF_H2(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_H2_OFFSET(n, i))
+#define DISPC_OVL_FIR_COEF_HV2(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_HV2_OFFSET(n, i))
+#define DISPC_OVL_CONV_COEF(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_CONV_COEF_OFFSET(n, i))
+#define DISPC_OVL_FIR_COEF_V(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_V_OFFSET(n, i))
+#define DISPC_OVL_FIR_COEF_V2(n, i)	(DISPC_OVL_BASE(n) + \
+					DISPC_FIR_COEF_V2_OFFSET(n, i))
+#define DISPC_OVL_PRELOAD(n)		(DISPC_OVL_BASE(n) + \
+					DISPC_PRELOAD_OFFSET(n))
+
+/* DISPC manager/channel specific registers */
+static inline u16 DISPC_DEFAULT_COLOR(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x004C;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		return 0x0050;
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03AC;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_TRANS_COLOR(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0054;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		return 0x0058;
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03B0;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_TIMING_H(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0064;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x0400;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_TIMING_V(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0068;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x0404;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_POL_FREQ(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x006C;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x0408;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_DIVISORo(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0070;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x040C;
+	default:
+		BUG();
+	}
+}
+
+/* Named as DISPC_SIZE_LCD, DISPC_SIZE_DIGIT and DISPC_SIZE_LCD2 in TRM */
+static inline u16 DISPC_SIZE_MGR(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x007C;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		return 0x0078;
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03CC;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_DATA_CYCLE1(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x01D4;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03C0;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_DATA_CYCLE2(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x01D8;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03C4;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_DATA_CYCLE3(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x01DC;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03C8;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_CPR_COEF_R(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0220;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03BC;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_CPR_COEF_G(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0224;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03B8;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_CPR_COEF_B(enum omap_channel channel)
+{
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		return 0x0228;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		BUG();
+	case OMAP_DSS_CHANNEL_LCD2:
+		return 0x03B4;
+	default:
+		BUG();
+	}
+}
+
+/* DISPC overlay register base addresses */
+static inline u16 DISPC_OVL_BASE(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0080;
+	case OMAP_DSS_VIDEO1:
+		return 0x00BC;
+	case OMAP_DSS_VIDEO2:
+		return 0x014C;
+	default:
+		BUG();
+	}
+}
+
+/* DISPC overlay register offsets */
+static inline u16 DISPC_BA0_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0000;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_BA1_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0004;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_BA0_UV_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0544;
+	case OMAP_DSS_VIDEO2:
+		return 0x04BC;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_BA1_UV_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0548;
+	case OMAP_DSS_VIDEO2:
+		return 0x04C0;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_POS_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0008;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_SIZE_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x000C;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ATTR_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0020;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0010;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ATTR2_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0568;
+	case OMAP_DSS_VIDEO2:
+		return 0x04DC;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_FIFO_THRESH_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0024;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0014;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_FIFO_SIZE_STATUS_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0028;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0018;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ROW_INC_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x002C;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x001C;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_PIX_INC_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0030;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0020;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_WINDOW_SKIP_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0034;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		BUG();
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_TABLE_BA_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x0038;
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		BUG();
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_FIR_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0024;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_FIR2_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0580;
+	case OMAP_DSS_VIDEO2:
+		return 0x055C;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_PIC_SIZE_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0028;
+	default:
+		BUG();
+	}
+}
+
+
+static inline u16 DISPC_ACCU0_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x002C;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ACCU2_0_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0584;
+	case OMAP_DSS_VIDEO2:
+		return 0x0560;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ACCU1_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0030;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_ACCU2_1_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0588;
+	case OMAP_DSS_VIDEO2:
+		return 0x0564;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_H_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0034 + i * 0x8;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_H2_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x058C + i * 0x8;
+	case OMAP_DSS_VIDEO2:
+		return 0x0568 + i * 0x8;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_HV_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0038 + i * 0x8;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_HV2_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0590 + i * 8;
+	case OMAP_DSS_VIDEO2:
+		return 0x056C + i * 0x8;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4,} */
+static inline u16 DISPC_CONV_COEF_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+	case OMAP_DSS_VIDEO2:
+		return 0x0074 + i * 0x4;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_V_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x0124 + i * 0x4;
+	case OMAP_DSS_VIDEO2:
+		return 0x00B4 + i * 0x4;
+	default:
+		BUG();
+	}
+}
+
+/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */
+static inline u16 DISPC_FIR_COEF_V2_OFFSET(enum omap_plane plane, u16 i)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		BUG();
+	case OMAP_DSS_VIDEO1:
+		return 0x05CC + i * 0x4;
+	case OMAP_DSS_VIDEO2:
+		return 0x05A8 + i * 0x4;
+	default:
+		BUG();
+	}
+}
+
+static inline u16 DISPC_PRELOAD_OFFSET(enum omap_plane plane)
+{
+	switch (plane) {
+	case OMAP_DSS_GFX:
+		return 0x01AC;
+	case OMAP_DSS_VIDEO1:
+		return 0x0174;
+	case OMAP_DSS_VIDEO2:
+		return 0x00E8;
+	default:
+		BUG();
+	}
+}
+#endif