spi: Add QuadSPI driver for Atmel SAMA5D2

Kernel contains QSPI driver strongly tied to MTD and nor-flash memory.
New spi-mem interface allows usage also other memory types, especially
much larger NAND with SPI interface. This driver works as SPI controller
and is not related to MTD, however can work with NAND-flash or other
peripherals using spi-mem interface.
Suggested-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NPiotr Bugalski <bugalski.piotr@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/mtd/spi-nor/Kconfig

@@ -39,15 +39,6 @@ config SPI_ASPEED_SMC
 	  and support for the SPI flash memory controller (SPI) for
 	  the host firmware. The implementation only supports SPI NOR.
 
-config SPI_ATMEL_QUADSPI
-	tristate "Atmel Quad SPI Controller"
-	depends on ARCH_AT91 || (ARM && COMPILE_TEST)
-	depends on OF && HAS_IOMEM
-	help
-	  This enables support for the Quad SPI controller in master mode.
-	  This driver does not support generic SPI. The implementation only
-	  supports SPI NOR.
-
 config SPI_CADENCE_QUADSPI
 	tristate "Cadence Quad SPI controller"
 	depends on OF && (ARM || ARM64 || COMPILE_TEST)

drivers/mtd/spi-nor/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
 obj-$(CONFIG_SPI_ASPEED_SMC)	+= aspeed-smc.o
-obj-$(CONFIG_SPI_ATMEL_QUADSPI)	+= atmel-quadspi.o
 obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
 obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
 obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o

drivers/spi/Kconfig

@@ -91,6 +91,15 @@ config SPI_AT91_USART
 	  This selects a driver for the AT91 USART Controller as SPI Master,
 	  present on AT91 and SAMA5 SoC series.
 
+config SPI_ATMEL_QUADSPI
+	tristate "Atmel Quad SPI Controller"
+	depends on ARCH_AT91 || (ARM && COMPILE_TEST)
+	depends on OF && HAS_IOMEM
+	help
+	  This enables support for the Quad SPI controller in master mode.
+	  This driver does not support generic SPI. The implementation only
+	  supports spi-mem interface.
+
 config SPI_AU1550
 	tristate "Au1550/Au1200/Au1300 SPI Controller"
 	depends on MIPS_ALCHEMY

drivers/spi/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
 obj-$(CONFIG_SPI_ARMADA_3700)		+= spi-armada-3700.o
 obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
+obj-$(CONFIG_SPI_ATMEL_QUADSPI)		+= atmel-quadspi.o
 obj-$(CONFIG_SPI_AT91_USART)		+= spi-at91-usart.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o