sh_eth: Change handling of IRQ

Handling of IRQ of the SH7763/SH7764 CPU which sh_eth supported was
changed.
This revises it for this change.
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/sh_eth.c

@@ -687,6 +687,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 {
 	struct net_device *ndev = netdev;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
+	irqreturn_t ret = IRQ_NONE;
 	u32 ioaddr, boguscnt = RX_RING_SIZE;
 	u32 intr_status = 0;
 
@@ -696,7 +697,13 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	/* Get interrpt stat */
 	intr_status = ctrl_inl(ioaddr + EESR);
 	/* Clear interrupt */
-	ctrl_outl(intr_status, ioaddr + EESR);
+	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
+			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
+			TX_CHECK | EESR_ERR_CHECK)) {
+		ctrl_outl(intr_status, ioaddr + EESR);
+		ret = IRQ_HANDLED;
+	} else
+		goto other_irq;
 
 	if (intr_status & (EESR_FRC | /* Frame recv*/
 			EESR_RMAF | /* Multi cast address recv*/
@@ -723,9 +730,10 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 		       ndev->name, intr_status);
 	}
 
+other_irq:
 	spin_unlock(&mdp->lock);
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void sh_eth_timer(unsigned long data)
@@ -844,7 +852,13 @@ static int sh_eth_open(struct net_device *ndev)
 	int ret = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
-	ret = request_irq(ndev->irq, &sh_eth_interrupt, 0, ndev->name, ndev);
+	ret = request_irq(ndev->irq, &sh_eth_interrupt,
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
+				IRQF_SHARED,
+#else
+				0,
+#endif
+				ndev->name, ndev);
 	if (ret) {
 		printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
 		return ret;