USB: musb: set version of Blackfin version

All current Blackfin parts are using RTL v1.9, but they don't expose the
hardware registers to probe this dynamically.  So hardcode the version to
v1.9 for now.

Need to move the local hwvers related defines higher up in the header so
that sub-musb headers may utilize them.
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/musb/musb_core.h

@@ -52,6 +52,15 @@ struct musb;
 struct musb_hw_ep;
 struct musb_ep;
 
+/* Helper defines for struct musb->hwvers */
+#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
+#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
+#define MUSB_HWVERS_RC		0x8000
+#define MUSB_HWVERS_1300	0x52C
+#define MUSB_HWVERS_1400	0x590
+#define MUSB_HWVERS_1800	0x720
+#define MUSB_HWVERS_1900	0x784
+#define MUSB_HWVERS_2000	0x800
 
 #include "musb_debug.h"
 #include "musb_dma.h"
@@ -322,13 +331,6 @@ struct musb {
 	struct clk		*clock;
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-#define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
-#define MUSB_HWVERS_MINOR(x)	(x & 0x3ff)
-#define MUSB_HWVERS_RC		0x8000
-#define MUSB_HWVERS_1300	0x52C
-#define MUSB_HWVERS_1400	0x590
-#define MUSB_HWVERS_1800	0x720
-#define MUSB_HWVERS_2000	0x800
 	u16			hwvers;
 
 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */

drivers/usb/musb/musb_regs.h

@@ -533,7 +533,11 @@ static inline u8 musb_read_configdata(void __iomem *mbase)
 
 static inline u16 musb_read_hwvers(void __iomem *mbase)
 {
-	return 0;
+	/*
+	 * This register is invisible on Blackfin, actually the MUSB
+	 * RTL version of Blackfin is 1.9, so just harcode its value.
+	 */
+	return MUSB_HWVERS_1900;
 }
 
 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)