Merge tag 'ti-k3-soc-for-v5.7' of...

Merge tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for v5.7

- Add missing clocks to dwc3 nodes on am65x (fixes USB)
- Add DMA entries for main_spi0 on am65x
- Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet
  support)
- Add DMA entries for ADC for both am65x and j721e
- Add MCU system control module on j721e (needed by phy-gmii-sel)

* tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes

Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.comSigned-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/ti/k3-am65-main.dtsi

@@ -189,6 +189,8 @@
 		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
 	};
 
 	main_spi1: spi@2110000 {
@@ -296,6 +298,7 @@
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -335,6 +338,7 @@
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 

arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi

@@ -12,6 +12,12 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
 	};
 
 	mcu_uart0: serial@40a00000 {
@@ -82,6 +88,9 @@
 		assigned-clocks = <&k3_clks 0 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -97,6 +106,9 @@
 		assigned-clocks = <&k3_clks 1 2>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;

arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi

@@ -34,6 +34,20 @@
 		};
 	};
 
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
@@ -203,6 +217,9 @@
 		assigned-clocks = <&k3_clks 0 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;
@@ -219,6 +236,9 @@
 		assigned-clocks = <&k3_clks 1 3>;
 		assigned-clock-rates = <60000000>;
 		clock-names = "adc_tsc_fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
 
 		adc {
 			#io-channel-cells = <1>;