提交 0cc2b4e5 编写于 作者: R Rafael J. Wysocki

PM / QoS: Fix device resume latency PM QoS

The special value of 0 for device resume latency PM QoS means
"no restriction", but there are two problems with that.

First, device resume latency PM QoS requests with 0 as the
value are always put in front of requests with positive
values in the priority lists used internally by the PM QoS
framework, causing 0 to be chosen as an effective constraint
value.  However, that 0 is then interpreted as "no restriction"
effectively overriding the other requests with specific
restrictions which is incorrect.

Second, the users of device resume latency PM QoS have no
way to specify that *any* resume latency at all should be
avoided, which is an artificial limitation in general.

To address these issues, modify device resume latency PM QoS to
use S32_MAX as the "no constraint" value and 0 as the "no
latency at all" one and rework its users (the cpuidle menu
governor, the genpd QoS governor and the runtime PM framework)
to follow these changes.

Also add a special "n/a" value to the corresponding user space I/F
to allow user space to indicate that it cannot accept any resume
latencies at all for the given device.

Fixes: 85dc0b8a (PM / QoS: Make it possible to expose PM QoS latency constraints)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323Reported-by: NReinette Chatre <reinette.chatre@intel.com>
Tested-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NAlex Shi <alex.shi@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
上级 bb176f67
......@@ -211,7 +211,9 @@ Description:
device, after it has been suspended at run time, from a resume
request to the moment the device will be ready to process I/O,
in microseconds. If it is equal to 0, however, this means that
the PM QoS resume latency may be arbitrary.
the PM QoS resume latency may be arbitrary and the special value
"n/a" means that user space cannot accept any resume latency at
all for the given device.
Not all drivers support this attribute. If it isn't supported,
it is not present.
......
......@@ -377,7 +377,8 @@ int register_cpu(struct cpu *cpu, int num)
per_cpu(cpu_sys_devices, num) = &cpu->dev;
register_cpu_under_node(num, cpu_to_node(num));
dev_pm_qos_expose_latency_limit(&cpu->dev, 0);
dev_pm_qos_expose_latency_limit(&cpu->dev,
PM_QOS_RESUME_LATENCY_NO_CONSTRAINT);
return 0;
}
......
......@@ -14,23 +14,20 @@
static int dev_update_qos_constraint(struct device *dev, void *data)
{
s64 *constraint_ns_p = data;
s32 constraint_ns = -1;
s64 constraint_ns = -1;
if (dev->power.subsys_data && dev->power.subsys_data->domain_data)
constraint_ns = dev_gpd_data(dev)->td.effective_constraint_ns;
if (constraint_ns < 0) {
if (constraint_ns < 0)
constraint_ns = dev_pm_qos_read_value(dev);
constraint_ns *= NSEC_PER_USEC;
}
if (constraint_ns == 0)
if (constraint_ns == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
return 0;
/*
* constraint_ns cannot be negative here, because the device has been
* suspended.
*/
if (constraint_ns < *constraint_ns_p || *constraint_ns_p == 0)
constraint_ns *= NSEC_PER_USEC;
if (constraint_ns < *constraint_ns_p || *constraint_ns_p < 0)
*constraint_ns_p = constraint_ns;
return 0;
......@@ -63,10 +60,14 @@ static bool default_suspend_ok(struct device *dev)
spin_unlock_irqrestore(&dev->power.lock, flags);
if (constraint_ns < 0)
if (constraint_ns == 0)
return false;
constraint_ns *= NSEC_PER_USEC;
if (constraint_ns == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
constraint_ns = -1;
else
constraint_ns *= NSEC_PER_USEC;
/*
* We can walk the children without any additional locking, because
* they all have been suspended at this point and their
......@@ -76,14 +77,19 @@ static bool default_suspend_ok(struct device *dev)
device_for_each_child(dev, &constraint_ns,
dev_update_qos_constraint);
if (constraint_ns > 0) {
constraint_ns -= td->suspend_latency_ns +
td->resume_latency_ns;
if (constraint_ns == 0)
return false;
if (constraint_ns < 0) {
/* The children have no constraints. */
td->effective_constraint_ns = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
td->cached_suspend_ok = true;
} else {
constraint_ns -= td->suspend_latency_ns + td->resume_latency_ns;
if (constraint_ns > 0) {
td->effective_constraint_ns = constraint_ns;
td->cached_suspend_ok = true;
} else {
td->effective_constraint_ns = 0;
}
}
td->effective_constraint_ns = constraint_ns;
td->cached_suspend_ok = constraint_ns >= 0;
/*
* The children have been suspended already, so we don't need to take
......@@ -145,13 +151,14 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd,
td = &to_gpd_data(pdd)->td;
constraint_ns = td->effective_constraint_ns;
/* default_suspend_ok() need not be called before us. */
if (constraint_ns < 0) {
if (constraint_ns < 0)
constraint_ns = dev_pm_qos_read_value(pdd->dev);
constraint_ns *= NSEC_PER_USEC;
}
if (constraint_ns == 0)
if (constraint_ns == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
continue;
constraint_ns *= NSEC_PER_USEC;
/*
* constraint_ns cannot be negative here, because the device has
* been suspended.
......
......@@ -189,7 +189,7 @@ static int dev_pm_qos_constraints_allocate(struct device *dev)
plist_head_init(&c->list);
c->target_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
c->default_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
c->no_constraint_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
c->no_constraint_value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
c->type = PM_QOS_MIN;
c->notifiers = n;
......
......@@ -253,7 +253,7 @@ static int rpm_check_suspend_allowed(struct device *dev)
|| (dev->power.request_pending
&& dev->power.request == RPM_REQ_RESUME))
retval = -EAGAIN;
else if (__dev_pm_qos_read_value(dev) < 0)
else if (__dev_pm_qos_read_value(dev) == 0)
retval = -EPERM;
else if (dev->power.runtime_status == RPM_SUSPENDED)
retval = 1;
......
......@@ -218,7 +218,14 @@ static ssize_t pm_qos_resume_latency_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", dev_pm_qos_requested_resume_latency(dev));
s32 value = dev_pm_qos_requested_resume_latency(dev);
if (value == 0)
return sprintf(buf, "n/a\n");
else if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
value = 0;
return sprintf(buf, "%d\n", value);
}
static ssize_t pm_qos_resume_latency_store(struct device *dev,
......@@ -228,11 +235,21 @@ static ssize_t pm_qos_resume_latency_store(struct device *dev,
s32 value;
int ret;
if (kstrtos32(buf, 0, &value))
return -EINVAL;
if (!kstrtos32(buf, 0, &value)) {
/*
* Prevent users from writing negative or "no constraint" values
* directly.
*/
if (value < 0 || value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
return -EINVAL;
if (value < 0)
if (value == 0)
value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
} else if (!strcmp(buf, "n/a") || !strcmp(buf, "n/a\n")) {
value = 0;
} else {
return -EINVAL;
}
ret = dev_pm_qos_update_request(dev->power.qos->resume_latency_req,
value);
......
......@@ -298,8 +298,8 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
data->needs_update = 0;
}
/* resume_latency is 0 means no restriction */
if (resume_latency && resume_latency < latency_req)
if (resume_latency < latency_req &&
resume_latency != PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
latency_req = resume_latency;
/* Special case when user has set very strict latency requirement */
......
......@@ -27,16 +27,17 @@ enum pm_qos_flags_status {
PM_QOS_FLAGS_ALL,
};
#define PM_QOS_DEFAULT_VALUE -1
#define PM_QOS_DEFAULT_VALUE (-1)
#define PM_QOS_LATENCY_ANY S32_MAX
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE 0
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT PM_QOS_LATENCY_ANY
#define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE 0
#define PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT (-1)
#define PM_QOS_LATENCY_ANY ((s32)(~(__u32)0 >> 1))
#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册