mfd: add AB4500 driver

This adds core driver support for AB4500 mixed signal
multimedia & power management chip. This connects to U8500
on the SSP (pl022) and exports read/write functions for
the device to get access to this chip. This also registers
the client devices and sets the parent.
Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
Reviewed-by: NMark Brown <broonie@sirena.org.uk>
Reviewed-by: NJean-Christophe <plagnioj@jcrosoft.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

drivers/mfd/Kconfig

@@ -329,6 +329,16 @@ config MFD_88PM8607
 	  individual components like voltage regulators, RTC and
 	  battery-charger under the corresponding menus.
 
+config AB4500_CORE
+	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
+	depends on SPI
+	default y
+	help
+	  Select this option to enable access to AB4500 power management
+	  chip. This connects to U8500 on the SSP/SPI bus and exports
+	  read/write functions for the devices to get access to this chip.
+	  This chip embeds various other multimedia funtionalities as well.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"

drivers/mfd/Makefile

@@ -52,4 +52,5 @@ obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
 obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
+obj-$(CONFIG_AB4500_CORE)	+= ab4500-core.o
 obj-$(CONFIG_MFD_88PM8607)	+= 88pm8607.o

drivers/mfd/ab4500-core.c

+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation.
+ *
+ * AB4500 is a companion power management chip used with U8500.
+ * On this platform, this is interfaced with SSP0 controller
+ * which is a ARM primecell pl022.
+ *
+ * At the moment the module just exports read/write features.
+ * Interrupt management to be added - TODO.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab4500.h>
+
+/* just required if probe fails, we need to
+ * unregister the device
+ */
+static struct spi_driver ab4500_driver;
+
+/*
+ * This funtion writes to any AB4500 registers using
+ * SPI protocol &  before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ *	 *|------------------------------------|
+ *	 *| 23|22...18|17.......10|9|8|7......0|
+ *	 *| r/w  bank       adr          data  |
+ *	 * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+int ab4500_write(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr, unsigned char data)
+{
+	struct spi_transfer xfer;
+	struct spi_message	msg;
+	int err;
+	unsigned long spi_data =
+		block << 18 | addr << 10 | data;
+
+	mutex_lock(&ab4500->lock);
+	ab4500->tx_buf[0] = spi_data;
+	ab4500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab4500->tx_buf;
+	xfer.rx_buf 	= NULL;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	err = spi_sync(ab4500->spi, &msg);
+	mutex_unlock(&ab4500->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(ab4500_write);
+
+int ab4500_read(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr)
+{
+	struct spi_transfer xfer;
+	struct spi_message	msg;
+	unsigned long spi_data =
+		1 << 23 | block << 18 | addr << 10;
+
+	mutex_lock(&ab4500->lock);
+	ab4500->tx_buf[0] = spi_data;
+	ab4500->rx_buf[0] = 0;
+
+	xfer.tx_buf	= ab4500->tx_buf;
+	xfer.rx_buf 	= ab4500->rx_buf;
+	xfer.len	= sizeof(unsigned long);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	spi_sync(ab4500->spi, &msg);
+	mutex_unlock(&ab4500->lock);
+
+	return  ab4500->rx_buf[0];
+}
+EXPORT_SYMBOL(ab4500_read);
+
+/* ref: ab3100 core */
+#define AB4500_DEVICE(devname, devid)				\
+static struct platform_device ab4500_##devname##_device = {	\
+	.name	= devid,					\
+	.id	= -1,						\
+}
+
+/* list of childern devices of ab4500 - all are
+ * not populated here - TODO
+ */
+AB4500_DEVICE(charger, "ab4500-charger");
+AB4500_DEVICE(audio, "ab4500-audio");
+AB4500_DEVICE(usb, "ab4500-usb");
+AB4500_DEVICE(tvout, "ab4500-tvout");
+AB4500_DEVICE(sim, "ab4500-sim");
+AB4500_DEVICE(gpadc, "ab4500-gpadc");
+AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
+AB4500_DEVICE(misc, "ab4500-misc");
+
+static struct platform_device *ab4500_platform_devs[] = {
+	&ab4500_charger_device,
+	&ab4500_audio_device,
+	&ab4500_usb_device,
+	&ab4500_tvout_device,
+	&ab4500_sim_device,
+	&ab4500_gpadc_device,
+	&ab4500_clkmgt_device,
+	&ab4500_misc_device,
+};
+
+static int __init ab4500_probe(struct spi_device *spi)
+{
+	struct ab4500	*ab4500;
+	unsigned char revision;
+	int err = 0;
+	int i;
+
+	ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
+	if (!ab4500) {
+		dev_err(&spi->dev, "could not allocate AB4500\n");
+		err = -ENOMEM;
+		goto not_detect;
+	}
+
+	ab4500->spi = spi;
+	spi_set_drvdata(spi, ab4500);
+
+	mutex_init(&ab4500->lock);
+
+	/* read the revision register */
+	revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
+
+	/* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
+	if (revision == 0x0 || revision == 0x10)
+		dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
+			ab4500_driver.driver.name, revision);
+	else	{
+		dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
+		goto not_detect;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++)	{
+		ab4500_platform_devs[i]->dev.parent =
+			&spi->dev;
+		platform_set_drvdata(ab4500_platform_devs[i], ab4500);
+	}
+
+	/* register the ab4500 platform devices */
+	platform_add_devices(ab4500_platform_devs,
+			ARRAY_SIZE(ab4500_platform_devs));
+
+	return err;
+
+ not_detect:
+	spi_unregister_driver(&ab4500_driver);
+	kfree(ab4500);
+	return err;
+}
+
+static int __devexit ab4500_remove(struct spi_device *spi)
+{
+	struct ab4500 *ab4500 =
+		spi_get_drvdata(spi);
+
+	kfree(ab4500);
+
+	return 0;
+}
+
+static struct spi_driver ab4500_driver = {
+	.driver = {
+		.name = "ab4500",
+		.owner = THIS_MODULE,
+	},
+	.probe = ab4500_probe,
+	.remove = __devexit_p(ab4500_remove)
+};
+
+static int __devinit ab4500_init(void)
+{
+	return spi_register_driver(&ab4500_driver);
+}
+
+static void __exit ab4500_exit(void)
+{
+	spi_unregister_driver(&ab4500_driver);
+}
+
+subsys_initcall_sync(ab4500_init);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB4500 core driver");
+MODULE_LICENSE("GPL");

include/linux/mfd/ab4500.h

+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * AB4500 device core funtions, for client access
+ */
+#ifndef MFD_AB4500_H
+#define MFD_AB4500_H
+
+#include <linux/device.h>
+
+/*
+ * AB4500 bank addresses
+ */
+#define AB4500_SYS_CTRL1_BLOCK	0x1
+#define AB4500_SYS_CTRL2_BLOCK	0x2
+#define AB4500_REGU_CTRL1	0x3
+#define AB4500_REGU_CTRL2	0x4
+#define AB4500_USB		0x5
+#define AB4500_TVOUT		0x6
+#define AB4500_DBI		0x7
+#define AB4500_ECI_AV_ACC	0x8
+#define AB4500_RESERVED		0x9
+#define AB4500_GPADC		0xA
+#define AB4500_CHARGER		0xB
+#define AB4500_GAS_GAUGE	0xC
+#define AB4500_AUDIO		0xD
+#define AB4500_INTERRUPT	0xE
+#define AB4500_RTC		0xF
+#define AB4500_MISC		0x10
+#define AB4500_DEBUG		0x12
+#define AB4500_PROD_TEST	0x13
+#define AB4500_OTP_EMUL		0x15
+
+/*
+ * System control 1 register offsets.
+ * Bank = 0x01
+ */
+#define AB4500_TURNON_STAT_REG		0x0100
+#define AB4500_RESET_STAT_REG		0x0101
+#define AB4500_PONKEY1_PRESS_STAT_REG	0x0102
+
+#define AB4500_FSM_STAT1_REG		0x0140
+#define AB4500_FSM_STAT2_REG		0x0141
+#define AB4500_SYSCLK_REQ_STAT_REG	0x0142
+#define AB4500_USB_STAT1_REG		0x0143
+#define AB4500_USB_STAT2_REG		0x0144
+#define AB4500_STATUS_SPARE1_REG	0x0145
+#define AB4500_STATUS_SPARE2_REG	0x0146
+
+#define AB4500_CTRL1_REG		0x0180
+#define AB4500_CTRL2_REG		0x0181
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB4500_CTRL3_REG		0x0200
+#define AB4500_MAIN_WDOG_CTRL_REG	0x0201
+#define AB4500_MAIN_WDOG_TIMER_REG	0x0202
+#define AB4500_LOW_BAT_REG		0x0203
+#define AB4500_BATT_OK_REG		0x0204
+#define AB4500_SYSCLK_TIMER_REG		0x0205
+#define AB4500_SMPSCLK_CTRL_REG		0x0206
+#define AB4500_SMPSCLK_SEL1_REG		0x0207
+#define AB4500_SMPSCLK_SEL2_REG		0x0208
+#define AB4500_SMPSCLK_SEL3_REG		0x0209
+#define AB4500_SYSULPCLK_CONF_REG	0x020A
+#define AB4500_SYSULPCLK_CTRL1_REG	0x020B
+#define AB4500_SYSCLK_CTRL_REG		0x020C
+#define AB4500_SYSCLK_REQ1_VALID_REG	0x020D
+#define AB4500_SYSCLK_REQ_VALID_REG	0x020E
+#define AB4500_SYSCTRL_SPARE_REG	0x020F
+#define AB4500_PAD_CONF_REG		0x0210
+
+/*
+ * Regu control1 register offsets
+ * Bank = 0x03
+ */
+#define AB4500_REGU_SERIAL_CTRL1_REG	0x0300
+#define AB4500_REGU_SERIAL_CTRL2_REG	0x0301
+#define AB4500_REGU_SERIAL_CTRL3_REG	0x0302
+#define AB4500_REGU_REQ_CTRL1_REG	0x0303
+#define AB4500_REGU_REQ_CTRL2_REG	0x0304
+#define AB4500_REGU_REQ_CTRL3_REG	0x0305
+#define AB4500_REGU_REQ_CTRL4_REG	0x0306
+#define AB4500_REGU_MISC1_REG		0x0380
+#define AB4500_REGU_OTGSUPPLY_CTRL_REG	0x0381
+#define AB4500_REGU_VUSB_CTRL_REG	0x0382
+#define AB4500_REGU_VAUDIO_SUPPLY_REG	0x0383
+#define AB4500_REGU_CTRL1_SPARE_REG	0x0384
+
+/*
+ * Regu control2 Vmod register offsets
+ */
+#define AB4500_REGU_VMOD_REGU_REG	0x0440
+#define AB4500_REGU_VMOD_SEL1_REG	0x0441
+#define AB4500_REGU_VMOD_SEL2_REG	0x0442
+#define AB4500_REGU_CTRL_DISCH_REG	0x0443
+#define AB4500_REGU_CTRL_DISCH2_REG	0x0444
+
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB4500_USB_LINE_STAT_REG	0x0580
+#define AB4500_USB_LINE_CTRL1_REG	0x0581
+#define AB4500_USB_LINE_CTRL2_REG	0x0582
+#define AB4500_USB_LINE_CTRL3_REG	0x0583
+#define AB4500_USB_LINE_CTRL4_REG	0x0584
+#define AB4500_USB_LINE_CTRL5_REG	0x0585
+#define AB4500_USB_OTG_CTRL_REG		0x0587
+#define AB4500_USB_OTG_STAT_REG		0x0588
+#define AB4500_USB_OTG_STAT_REG		0x0588
+#define AB4500_USB_CTRL_SPARE_REG	0x0589
+#define AB4500_USB_PHY_CTRL_REG		0x058A
+
+/*
+ * TVOUT / CTRL register offsets
+ * Bank : 0x06
+ */
+#define AB4500_TVOUT_CTRL_REG		0x0680
+
+/*
+ * DBI register offsets
+ * Bank : 0x07
+ */
+#define AB4500_DBI_REG1_REG		0x0700
+#define AB4500_DBI_REG2_REG		0x0701
+
+/*
+ * ECI regsiter offsets
+ * Bank : 0x08
+ */
+#define AB4500_ECI_CTRL_REG		0x0800
+#define AB4500_ECI_HOOKLEVEL_REG	0x0801
+#define AB4500_ECI_DATAOUT_REG		0x0802
+#define AB4500_ECI_DATAIN_REG		0x0803
+
+/*
+ * AV Connector register offsets
+ * Bank : 0x08
+ */
+#define AB4500_AV_CONN_REG		0x0840
+
+/*
+ * Accessory detection register offsets
+ * Bank : 0x08
+ */
+#define AB4500_ACC_DET_DB1_REG		0x0880
+#define AB4500_ACC_DET_DB2_REG		0x0881
+
+/*
+ * GPADC register offsets
+ * Bank : 0x0A
+ */
+#define AB4500_GPADC_CTRL1_REG		0x0A00
+#define AB4500_GPADC_CTRL2_REG		0x0A01
+#define AB4500_GPADC_CTRL3_REG		0x0A02
+#define AB4500_GPADC_AUTO_TIMER_REG	0x0A03
+#define AB4500_GPADC_STAT_REG		0x0A04
+#define AB4500_GPADC_MANDATAL_REG	0x0A05
+#define AB4500_GPADC_MANDATAH_REG	0x0A06
+#define AB4500_GPADC_AUTODATAL_REG	0x0A07
+#define AB4500_GPADC_AUTODATAH_REG	0x0A08
+#define AB4500_GPADC_MUX_CTRL_REG	0x0A09
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_CH_STATUS1_REG		0x0B00
+#define AB4500_CH_STATUS2_REG		0x0B01
+#define AB4500_CH_USBCH_STAT1_REG	0x0B02
+#define AB4500_CH_USBCH_STAT2_REG	0x0B03
+#define AB4500_CH_FSM_STAT_REG		0x0B04
+#define AB4500_CH_STAT_REG		0x0B05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_CH_VOLT_LVL_REG		0x0B40
+
+/*
+ * Charger / main control register offfsets
+ * Bank : 0x0B
+ */
+#define AB4500_MCH_CTRL1		0x0B80
+#define AB4500_MCH_CTRL2		0x0B81
+#define AB4500_MCH_IPT_CURLVL_REG	0x0B82
+#define AB4500_CH_WD_REG		0x0B83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB4500_USBCH_CTRL1_REG		0x0BC0
+#define AB4500_USBCH_CTRL2_REG		0x0BC1
+#define AB4500_USBCH_IPT_CRNTLVL_REG	0x0BC2
+
+/*
+ * RTC bank register offsets
+ * Bank : 0xF
+ */
+#define AB4500_RTC_SOFF_STAT_REG	0x0F00
+#define AB4500_RTC_CC_CONF_REG		0x0F01
+#define AB4500_RTC_READ_REQ_REG		0x0F02
+#define AB4500_RTC_WATCH_TSECMID_REG	0x0F03
+#define AB4500_RTC_WATCH_TSECHI_REG	0x0F04
+#define AB4500_RTC_WATCH_TMIN_LOW_REG	0x0F05
+#define AB4500_RTC_WATCH_TMIN_MID_REG	0x0F06
+#define AB4500_RTC_WATCH_TMIN_HI_REG	0x0F07
+#define AB4500_RTC_ALRM_MIN_LOW_REG	0x0F08
+#define AB4500_RTC_ALRM_MIN_MID_REG	0x0F09
+#define AB4500_RTC_ALRM_MIN_HI_REG	0x0F0A
+#define AB4500_RTC_STAT_REG		0x0F0B
+#define AB4500_RTC_BKUP_CHG_REG		0x0F0C
+#define AB4500_RTC_FORCE_BKUP_REG	0x0F0D
+#define AB4500_RTC_CALIB_REG		0x0F0E
+#define AB4500_RTC_SWITCH_STAT_REG	0x0F0F
+
+/*
+ * PWM Out generators
+ * Bank: 0x10
+ */
+#define AB4500_PWM_OUT_CTRL1_REG	0x1060
+#define AB4500_PWM_OUT_CTRL2_REG	0x1061
+#define AB4500_PWM_OUT_CTRL3_REG	0x1062
+#define AB4500_PWM_OUT_CTRL4_REG	0x1063
+#define AB4500_PWM_OUT_CTRL5_REG	0x1064
+#define AB4500_PWM_OUT_CTRL6_REG	0x1065
+#define AB4500_PWM_OUT_CTRL7_REG	0x1066
+
+#define AB4500_I2C_PAD_CTRL_REG		0x1067
+#define AB4500_REV_REG			0x1080
+
+/**
+ * struct ab4500
+ * @spi: spi device structure
+ * @tx_buf: transmit buffer
+ * @rx_buf: receive buffer
+ * @lock: sync primitive
+ */
+struct ab4500 {
+	struct spi_device	*spi;
+	unsigned long		tx_buf[4];
+	unsigned long		rx_buf[4];
+	struct mutex		lock;
+};
+
+int ab4500_write(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr, unsigned char data);
+int ab4500_read(struct ab4500 *ab4500, unsigned char block,
+		unsigned long addr);
+
+#endif /* MFD_AB4500_H */