提交 0bfd5df5 编写于 作者: K Kumar Gala

[POWERPC] 85xx: Killed <asm/mpc85xx.h>

asm-powerpc/mpc85xx.h was really a hold over from arch/ppc.  Now that
more decoupling has occurred we can remove <asm/mpc85xx.h> and some of
its legacy.

As part of this we moved the definition of CPM_MAP_ADDR into cpm2.h
for 85xx platforms.  This is a stop gap until drivers stop using
CPM_MAP_ADDR.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 ab9683ca
/*
* arch/powerpc/platforms/85xx/mpc8540_ads.h
*
* MPC8540ADS board definitions
*
* Maintainer: Kumar Gala <kumar.gala@freescale.com>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC8540ADS_H__
#define __MACH_MPC8540ADS_H__
#include <linux/initrd.h>
#define BOARD_CCSRBAR ((uint)0xe0000000)
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
/* PCI interrupt controller */
#define PIRQA MPC85xx_IRQ_EXT1
#define PIRQB MPC85xx_IRQ_EXT2
#define PIRQC MPC85xx_IRQ_EXT3
#define PIRQD MPC85xx_IRQ_EXT4
/* Offset of CPM register space */
#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
#endif /* __MACH_MPC8540ADS_H__ */
......@@ -23,7 +23,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/mpic.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
......
/*
* MPC85xx ADS board definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC85XXADS_H
#define __MACH_MPC85XXADS_H
#include <linux/initrd.h>
#include <sysdev/fsl_soc.h>
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
#ifdef CONFIG_CPM2
#define MPC85xx_CPM_OFFSET (0x80000)
#define CPM_MAP_ADDR (get_immrbase() + MPC85xx_CPM_OFFSET)
#define CPM_IRQ_OFFSET 60
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
/* FCC1 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK9-12 */
#define F1_RXCLK 12
#define F1_TXCLK 11
/* FCC2 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F2_RXCLK 13
#define F2_TXCLK 14
/* FCC3 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F3_RXCLK 15
#define F3_TXCLK 16
#endif /* CONFIG_CPM2 */
#endif /* __MACH_MPC85XXADS_H */
......@@ -36,7 +36,6 @@
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
......@@ -47,6 +46,15 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
/* CADMUS info */
/* xxx - galak, move into device tree */
#define CADMUS_BASE (0xf8004000)
#define CADMUS_SIZE (256)
#define CM_VER (0)
#define CM_CSR (1)
#define CM_RST (2)
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
......
/*
* arch/powerpc/platforms/85xx/mpc85xx_cds.h
*
* MPC85xx CDS board definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC85XX_CDS_H__
#define __MACH_MPC85XX_CDS_H__
/* CADMUS info */
#define CADMUS_BASE (0xf8004000)
#define CADMUS_SIZE (256)
#define CM_VER (0)
#define CM_CSR (1)
#define CM_RST (2)
/* CDS NVRAM/RTC */
#define CDS_RTC_ADDR (0xf8000000)
#define CDS_RTC_SIZE (8 * 1024)
/* PCI interrupt controller */
#define PIRQ0A MPC85xx_IRQ_EXT0
#define PIRQ0B MPC85xx_IRQ_EXT1
#define PIRQ0C MPC85xx_IRQ_EXT2
#define PIRQ0D MPC85xx_IRQ_EXT3
#define PIRQ1A MPC85xx_IRQ_EXT11
#define NR_8259_INTS 16
#define CPM_IRQ_OFFSET NR_8259_INTS
#define MPC85xx_OPENPIC_IRQ_OFFSET 80
#endif /* __MACH_MPC85XX_CDS_H__ */
......@@ -24,7 +24,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
......
......@@ -39,7 +39,6 @@
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
......
......@@ -13,6 +13,10 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm.h>
#ifdef CONFIG_PPC_85xx
#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
#endif
/* CPM Command register.
*/
#define CPM_CR_RST ((uint)0x80000000)
......
......@@ -19,8 +19,6 @@
#if defined(CONFIG_8260)
#include <asm/mpc8260.h>
#elif defined(CONFIG_85xx)
#include <asm/mpc85xx.h>
#endif
#define cpm2_map(member) (&cpm2_immr->member)
......
/*
* include/asm-powerpc/mpc85xx.h
*
* MPC85xx definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_MPC85xx_H__
#define __ASM_MPC85xx_H__
#include <asm/mmu.h>
#ifdef CONFIG_85xx
#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS)
#include <platforms/85xx/mpc85xx_ads.h>
#endif
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
#include <platforms/85xx/mpc8555_cds.h>
#endif
#ifdef CONFIG_MPC85xx_CDS
#include <platforms/85xx/mpc85xx_cds.h>
#endif
/* Let modules/drivers get at CCSRBAR */
extern phys_addr_t get_ccsrbar(void);
#ifdef MODULE
#define CCSRBAR get_ccsrbar()
#else
#define CCSRBAR BOARD_CCSRBAR
#endif
#endif /* CONFIG_85xx */
#endif /* __ASM_MPC85xx_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册