[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions

pxa3xx_mfp_set_xxx() functions are originally provided for overwriting
MFP configurations performed by pxa3xx_mfp_config(), the usage of such
a dirtry trick is not recommended, since there is currently no user of
these functions, they are safely removed
Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/mfp.c

@@ -96,117 +96,6 @@ void pxa3xx_mfp_write(int mfp, unsigned long val)
 	spin_unlock_irqrestore(&mfp_spin_lock, flags);
 }
 
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_off = mfp_table[mfp].mfpr_off;
-
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
-	mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
-		     ((ds & 0x7) << MFPR_DRV_OFFSET));
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_rdh(int mfp, int rdh)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_RDH_MASK;
-
-	if (likely(rdh))
-		mfpr_val |= (1u << MFPR_SS_OFFSET);
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_lpm(int mfp, int lpm)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_LPM_MASK;
-
-	if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
-	if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
-	if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
-	if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
-	if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_pull(int mfp, int pull)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-	mfpr_val &= ~MFPR_PULL_MASK;
-	mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void pxa3xx_mfp_set_edge(int mfp, int edge)
-{
-	uint32_t mfpr_off, mfpr_val;
-	unsigned long flags;
-
-	BUG_ON(mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	mfpr_off = mfp_table[mfp].mfpr_off;
-	mfpr_val = mfpr_readl(mfpr_off);
-
-	mfpr_val &= ~MFPR_EDGE_MASK;
-	mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
-	mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
-
-	mfpr_writel(mfpr_off, mfpr_val);
-	mfpr_sync();
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
 void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
 {
 	struct pxa3xx_mfp_addr_map *p;

include/asm-arm/arch-pxa/mfp.h

@@ -418,20 +418,6 @@ struct pxa3xx_mfp_pin {
 unsigned long pxa3xx_mfp_read(int mfp);
 void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
 
-/*
- * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
- * pxa3xx_mfp_set_rdh  - set MFP release delay hold on/off
- * pxa3xx_mfp_set_lpm  - set MFP low power mode state
- * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
- *
- * use these functions to override/change the default configuration
- * done by pxa3xx_mfp_set_config(s)
- */
-void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
-void pxa3xx_mfp_set_rdh(int mfp, int rdh);
-void pxa3xx_mfp_set_lpm(int mfp, int lpm);
-void pxa3xx_mfp_set_edge(int mfp, int edge);
-
 /*
  * pxa3xx_mfp_config - configure the MFPR registers
  *