Bluetooth: btusb: Add *setup* function for new generation Intel controllers

Define a new  *setup* function for new generation Intel controllers
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NAmit K Bag <amit.k.bag@intel.com>
Signed-off-by: NRaghuram Hegde <raghuram.hegde@intel.com>
Reviewed-by: NSathish Narasimman <Sathish.Narasimman@intel.com>
Reviewed-by: NChethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: NSrivatsa Ravishankar <ravishankar.srivatsa@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

drivers/bluetooth/btusb.c

@@ -60,6 +60,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
+#define BTUSB_INTEL_NEWGEN	0x2000000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -2718,6 +2719,128 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	return 0;
 }
 
+static int btusb_setup_intel_newgen(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 boot_param;
+	char ddcname[64];
+	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	int err;
+	struct intel_debug_features features;
+	struct intel_version_tlv version;
+
+	bt_dev_dbg(hdev, "");
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	calltime = ktime_get();
+
+	/* Read the Intel version information to determine if the device
+	 * is in bootloader mode or if it already has operational firmware
+	 * loaded.
+	 */
+	err = btintel_read_version_tlv(hdev, &version);
+	if (err) {
+		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	btintel_version_info_tlv(hdev, &version);
+
+	/* check if controller is already having an operational firmware */
+	if (version.img_type == 0x03)
+		goto finish;
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+	calltime = ktime_get();
+
+	set_bit(BTUSB_BOOTING, &data->flags);
+
+	err = btintel_send_intel_reset(hdev, boot_param);
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
+
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Device boot timeout");
+		btintel_reset_to_bootloader(hdev);
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	clear_bit(BTUSB_BOOTLOADER, &data->flags);
+
+	/* Once the device is running in operational mode, it needs to
+	 * apply the device configuration (DDC) parameters.
+	 *
+	 * The device can work without DDC parameters, so even if it
+	 * fails to load the file, no need to fail the setup.
+	 */
+	btintel_load_ddc_config(hdev, ddcname);
+
+	/* Read the Intel supported features and if new exception formats
+	 * supported, need to load the additional DDC config to enable.
+	 */
+	btintel_read_debug_features(hdev, &features);
+
+	/* Set DDC mask for available debug features */
+	btintel_set_debug_features(hdev, &features);
+
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version_tlv(hdev, &version);
+	if (err)
+		return err;
+
+	btintel_version_info_tlv(hdev, &version);
+
+finish:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation. It
+	 * does not enable any debugging related events.
+	 *
+	 * The device will function correctly without these events enabled
+	 * and thus no need to fail the setup.
+	 */
+	btintel_set_event_mask(hdev, false);
+
+	return 0;
+}
 static int btusb_shutdown_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -4103,6 +4226,24 @@ static int btusb_probe(struct usb_interface *intf,
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
 	}
 
+	if (id->driver_info & BTUSB_INTEL_NEWGEN) {
+		hdev->manufacturer = 2;
+		hdev->send = btusb_send_frame_intel;
+		hdev->setup = btusb_setup_intel_newgen;
+		hdev->shutdown = btusb_shutdown_intel_new;
+		hdev->hw_error = btintel_hw_error;
+		hdev->set_diag = btintel_set_diag;
+		hdev->set_bdaddr = btintel_set_bdaddr;
+		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
+		data->recv_event = btusb_recv_event_intel;
+		data->recv_bulk = btusb_recv_bulk_intel;
+		set_bit(BTUSB_BOOTLOADER, &data->flags);
+	}
+
 	if (id->driver_info & BTUSB_MARVELL)
 		hdev->set_bdaddr = btusb_set_bdaddr_marvell;