Merge tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

i.MX6 device tree changes for 3.15, take 2 from Shawn Guo:
 - Add USB, GPMI and SATA support for imx6q-phytec board
 - Update imx6sl-evk board support regarding PFUZE100, audio and
   LED etc.
 - Minor updates on a few imx6qdl boards

* tag 'imx6-dt-3.15-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx6q-phytec: Added SATA Support
  ARM: dts: imx6q-phytec: Added GPMI-NAND Support
  ARM: dts: imx6q-phytec: Added USB_HOST Support
  ARM: dts: imx6q-phytec: Added USB_OTG Support
  ARM: dts: imx6sl-evk: Keep VGEN1 regulator always enabled
  ARM: dts: imx6qdl-sabreauto: Support debug LED
  ARM: dts: imx6q: add 852MHz setpoint for CPU freq
  ARM: dts: imx6qdl-wandboard: use GPIO_6 for FEC interrupt
  ARM: dts: imx6sl-evk: Add debug LED support
  ARM: dts: imx6qdl-sabreauto: Add PFUZE100 support
  ARM: dts: imx6sl-evk: Add audio support
  ARM: dts: imx6sl-evk: Add PFUZE100 support
  ARM: dts: imx6qdl-sabresd: correct gpio key's active state
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/imx6q-phytec-pbab01.dts

@@ -21,10 +21,26 @@
 	status = "okay";
 };
 
+&gpmi {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &uart4 {
 	status = "okay";
 };
 
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
 &usdhc2 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi

@@ -18,6 +18,30 @@
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 0>;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 0 0>;
+		};
+	};
 };
 
 &ecspi3 {
@@ -166,6 +190,28 @@
 			>;
 		};
 
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
@@ -180,6 +226,20 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+			>;
+		};
+
 		pinctrl_usdhc2: usdhc2grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
@@ -219,12 +279,34 @@
 	status = "disabled";
 };
 
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "disabled";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;

arch/arm/boot/dts/imx6q.dtsi

@@ -30,6 +30,7 @@
 				/* kHz    uV */
 				1200000 1275000
 				996000  1250000
+				852000  1250000
 				792000  1150000
 				396000  975000
 			>;
@@ -37,6 +38,7 @@
 				/* ARM kHz  SOC-PU uV */
 				1200000 1275000
 				996000	1250000
+				852000	1250000
 				792000	1175000
 				396000	1175000
 			>;

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -10,11 +10,24 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif",
 			   "fsl,imx-sabreauto-spdif";
@@ -63,6 +76,112 @@
 	status = "okay";
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -111,6 +230,12 @@
 			>;
 		};
 
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
 		pinctrl_gpmi_nand: gpminandgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
@@ -133,6 +258,13 @@
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -10,6 +10,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -58,21 +59,21 @@
 
 		power {
 			label = "Power Button";
-			gpios = <&gpio3 29 0>;
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
-			gpios = <&gpio1 4 0>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
-			gpios = <&gpio1 5 0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -123,6 +123,7 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
@@ -201,6 +202,8 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 29 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6sl-evk.dts

@@ -8,6 +8,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx6sl.dtsi"
 
@@ -19,6 +20,18 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -43,9 +56,49 @@
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
 		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 11 0>;
@@ -69,6 +122,134 @@
 	status = "okay";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -83,6 +264,16 @@
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
 				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
 				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
 			>;
 		};
 
@@ -108,6 +299,27 @@
 			>;
 		};
 
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
 		pinctrl_kpp: kppgrp {
 			fsl,pins = <
 				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
@@ -261,6 +473,11 @@
 	status = "okay";
 };
 
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;