cxgb4: Set mac addr from vpd, when we can't contact firmware

Grab the Adapter MAC Address out of the VPD and use it for the "debug"
network interface when either we can't contact the firmware
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -46,17 +46,19 @@
 #include <linux/spinlock.h>
 #include <linux/timer.h>
 #include <linux/vmalloc.h>
+#include <linux/etherdevice.h>
 #include <asm/io.h>
 #include "cxgb4_uld.h"
 
 #define CH_WARN(adap, fmt, ...) dev_warn(adap->pdev_dev, fmt, ## __VA_ARGS__)
 
 enum {
-	MAX_NPORTS = 4,     /* max # of ports */
-	SERNUM_LEN = 24,    /* Serial # length */
-	EC_LEN     = 16,    /* E/C length */
-	ID_LEN     = 16,    /* ID length */
-	PN_LEN     = 16,    /* Part Number length */
+	MAX_NPORTS	= 4,     /* max # of ports */
+	SERNUM_LEN	= 24,    /* Serial # length */
+	EC_LEN		= 16,    /* E/C length */
+	ID_LEN		= 16,    /* ID length */
+	PN_LEN		= 16,    /* Part Number length */
+	MACADDR_LEN	= 12,    /* MAC Address length */
 };
 
 enum {
@@ -280,6 +282,7 @@ struct vpd_params {
 	u8 sn[SERNUM_LEN + 1];
 	u8 id[ID_LEN + 1];
 	u8 pn[PN_LEN + 1];
+	u8 na[MACADDR_LEN + 1];
 };
 
 struct pci_params {
@@ -945,6 +948,22 @@ static inline void t4_write_reg64(struct adapter *adap, u32 reg_addr, u64 val)
 	writeq(val, adap->regs + reg_addr);
 }
 
+/**
+ * t4_set_hw_addr - store a port's MAC address in SW
+ * @adapter: the adapter
+ * @port_idx: the port index
+ * @hw_addr: the Ethernet address
+ *
+ * Store the Ethernet address of the given port in SW.  Called by the common
+ * code when it retrieves a port's Ethernet address from EEPROM.
+ */
+static inline void t4_set_hw_addr(struct adapter *adapter, int port_idx,
+				  u8 hw_addr[])
+{
+	ether_addr_copy(adapter->port[port_idx]->dev_addr, hw_addr);
+	ether_addr_copy(adapter->port[port_idx]->perm_addr, hw_addr);
+}
+
 /**
  * netdev2pinfo - return the port_info structure associated with a net_device
  * @dev: the netdev
@@ -1251,7 +1270,8 @@ unsigned int t4_get_regs_len(struct adapter *adapter);
 void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size);
 
 int t4_seeprom_wp(struct adapter *adapter, bool enable);
-int get_vpd_params(struct adapter *adapter, struct vpd_params *p);
+int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p);
+int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p);
 int t4_read_flash(struct adapter *adapter, unsigned int addr,
 		  unsigned int nwords, u32 *data, int byte_oriented);
 int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size);

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -3712,7 +3712,7 @@ static int adap_init0(struct adapter *adap)
 	 * the firmware.  On the other hand, we need these fairly early on
 	 * so we do this right after getting ahold of the firmware.
 	 */
-	ret = get_vpd_params(adap, &adap->params.vpd);
+	ret = t4_get_vpd_params(adap, &adap->params.vpd);
 	if (ret < 0)
 		goto bye;
 
@@ -4735,10 +4735,25 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		err = t4_port_init(adapter, func, func, 0);
 		if (err)
 			goto out_free_dev;
+	} else if (adapter->params.nports == 1) {
+		/* If we don't have a connection to the firmware -- possibly
+		 * because of an error -- grab the raw VPD parameters so we
+		 * can set the proper MAC Address on the debug network
+		 * interface that we've created.
+		 */
+		u8 hw_addr[ETH_ALEN];
+		u8 *na = adapter->params.vpd.na;
+
+		err = t4_get_raw_vpd_params(adapter, &adapter->params.vpd);
+		if (!err) {
+			for (i = 0; i < ETH_ALEN; i++)
+				hw_addr[i] = (hex2val(na[2 * i + 0]) * 16 +
+					      hex2val(na[2 * i + 1]));
+			t4_set_hw_addr(adapter, 0, hw_addr);
+		}
 	}
 
-	/*
-	 * Configure queues and allocate tables now, they can be needed as
+	/* Configure queues and allocate tables now, they can be needed as
 	 * soon as the first register_netdev completes.
 	 */
 	cfg_queues(adapter);

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -1729,17 +1729,16 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
 }
 
 /**
- *	get_vpd_params - read VPD parameters from VPD EEPROM
+ *	t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM
  *	@adapter: adapter to read
  *	@p: where to store the parameters
  *
  *	Reads card parameters stored in VPD EEPROM.
  */
-int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
-	u32 cclk_param, cclk_val;
-	int i, ret, addr;
-	int ec, sn, pn;
+	int i, ret = 0, addr;
+	int ec, sn, pn, na;
 	u8 *vpd, csum;
 	unsigned int vpdr_len, kw_offset, id_len;
 
@@ -1747,6 +1746,9 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (!vpd)
 		return -ENOMEM;
 
+	/* Card information normally starts at VPD_BASE but early cards had
+	 * it at 0.
+	 */
 	ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
 	if (ret < 0)
 		goto out;
@@ -1812,6 +1814,7 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	FIND_VPD_KW(ec, "EC");
 	FIND_VPD_KW(sn, "SN");
 	FIND_VPD_KW(pn, "PN");
+	FIND_VPD_KW(na, "NA");
 #undef FIND_VPD_KW
 
 	memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
@@ -1824,18 +1827,42 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE);
 	memcpy(p->pn, vpd + pn, min(i, PN_LEN));
 	strim(p->pn);
+	memcpy(p->na, vpd + na, min(i, MACADDR_LEN));
+	strim((char *)p->na);
 
-	/*
-	 * Ask firmware for the Core Clock since it knows how to translate the
+out:
+	vfree(vpd);
+	return ret;
+}
+
+/**
+ *	t4_get_vpd_params - read VPD parameters & retrieve Core Clock
+ *	@adapter: adapter to read
+ *	@p: where to store the parameters
+ *
+ *	Reads card parameters stored in VPD EEPROM and retrieves the Core
+ *	Clock.  This can only be called after a connection to the firmware
+ *	is established.
+ */
+int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+{
+	u32 cclk_param, cclk_val;
+	int ret;
+
+	/* Grab the raw VPD parameters.
+	 */
+	ret = t4_get_raw_vpd_params(adapter, p);
+	if (ret)
+		return ret;
+
+	/* Ask firmware for the Core Clock since it knows how to translate the
 	 * Reference Clock ('V2') VPD field into a Core Clock value ...
 	 */
 	cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
 		      FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK));
-	ret = t4_query_params(adapter, adapter->mbox, 0, 0,
+	ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
 			      1, &cclk_param, &cclk_val);
 
-out:
-	vfree(vpd);
 	if (ret)
 		return ret;
 	p->cclk = cclk_val;