lp8788-charger: Fix ADC channel names

The name of ADC channel is configurable in the platform side. This name is
referenced in the IIO consumer driver. To get the IIO channel, specific
name in the platform data is used as an parameter of the
iio_channel_get(). Thus, lp8788_adc_id platform data are replaced with
specific names.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>

drivers/power/lp8788-charger.c

@@ -584,50 +584,18 @@ static void lp8788_setup_adc_channel(const char *consumer_name,
 				struct lp8788_charger *pchg)
 {
 	struct lp8788_charger_platform_data *pdata = pchg->pdata;
-	struct device *dev = pchg->lp->dev;
 	struct iio_channel *chan;
-	enum lp8788_adc_id id;
-	const char *chan_name[LPADC_MAX] = {
-		[LPADC_VBATT_5P5] = "vbatt-5p5",
-		[LPADC_VBATT_6P0] = "vbatt-6p0",
-		[LPADC_VBATT_5P0] = "vbatt-5p0",
-		[LPADC_ADC1]      = "adc1",
-		[LPADC_ADC2]      = "adc2",
-		[LPADC_ADC3]      = "adc3",
-		[LPADC_ADC4]      = "adc4",
-	};
 
 	if (!pdata)
 		return;
 
-	id = pdata->vbatt_adc;
-	switch (id) {
-	case LPADC_VBATT_5P5:
-	case LPADC_VBATT_6P0:
-	case LPADC_VBATT_5P0:
-		chan = iio_channel_get(consumer_name, chan_name[id]);
-		pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
-		break;
-	default:
-		dev_err(dev, "invalid ADC id for VBATT: %d\n", id);
-		pchg->chan[LP8788_VBATT] = NULL;
-		break;
-	}
+	/* ADC channel for battery voltage */
+	chan = iio_channel_get(consumer_name, pdata->adc_vbatt);
+	pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
 
-	id = pdata->batt_temp_adc;
-	switch (id) {
-	case LPADC_ADC1:
-	case LPADC_ADC2:
-	case LPADC_ADC3:
-	case LPADC_ADC4:
-		chan = iio_channel_get(consumer_name, chan_name[id]);
-		pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
-		break;
-	default:
-		dev_err(dev, "invalid ADC id for BATT_TEMP : %d\n", id);
-		pchg->chan[LP8788_BATT_TEMP] = NULL;
-		break;
-	}
+	/* ADC channel for battery temperature */
+	chan = iio_channel_get(consumer_name, pdata->adc_batt_temp);
+	pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
 }
 
 static void lp8788_release_adc_channel(struct lp8788_charger *pchg)

include/linux/mfd/lp8788.h

@@ -211,16 +211,16 @@ struct lp8788_chg_param {
 
 /*
  * struct lp8788_charger_platform_data
- * @vbatt_adc         : adc selection id for battery voltage
- * @batt_temp_adc     : adc selection id for battery temperature
+ * @adc_vbatt         : adc channel name for battery voltage
+ * @adc_batt_temp     : adc channel name for battery temperature
  * @max_vbatt_mv      : used for calculating battery capacity
  * @chg_params        : initial charging parameters
  * @num_chg_params    : numbers of charging parameters
  * @charger_event     : the charger event can be reported to the platform side
  */
 struct lp8788_charger_platform_data {
-	enum lp8788_adc_id vbatt_adc;
-	enum lp8788_adc_id batt_temp_adc;
+	const char *adc_vbatt;
+	const char *adc_batt_temp;
 	unsigned int max_vbatt_mv;
 	struct lp8788_chg_param *chg_params;
 	int num_chg_params;