Revert "serial: pl011: add console matching function"

This reverts commit 8b8f347d as it
causes build errors in linux-next
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Aleksey Makarov <aleksey.makarov@linaro.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Christopher Covington <cov@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/amba-pl011.c

@@ -2315,67 +2315,12 @@ static int __init pl011_console_setup(struct console *co, char *options)
 	return uart_set_options(&uap->port, co, baud, parity, bits, flow);
 }
 
-/**
- *	pl011_console_match - non-standard console matching
- *	@co:	  registering console
- *	@name:	  name from console command line
- *	@idx:	  index from console command line
- *	@options: ptr to option string from console command line
- *
- *	Only attempts to match console command lines of the form:
- *	    console=pl011,mmio|mmio32,<addr>[,<options>]
- *	    console=pl011,0x<addr>[,<options>]
- *	This form is used to register an initial earlycon boot console and
- *	replace it with the amba_console at pl011 driver init.
- *
- *	Performs console setup for a match (as required by interface)
- *	If no <options> are specified, then assume the h/w is already setup.
- *
- *	Returns 0 if console matches; otherwise non-zero to use default matching
- */
-static int __init pl011_console_match(struct console *co, char *name, int idx,
-				      char *options)
-{
-	unsigned char iotype;
-	unsigned long addr;
-	int i;
-
-	if (strcmp(name, "pl011") != 0)
-		return -ENODEV;
-
-	if (uart_parse_earlycon(options, &iotype, &addr, &options))
-		return -ENODEV;
-
-	if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
-		return -ENODEV;
-
-	/* try to match the port specified on the command line */
-	for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
-		struct uart_port *port;
-
-		if (!amba_ports[i])
-			continue;
-
-		port = &amba_ports[i]->port;
-
-		if (port->mapbase != addr)
-			continue;
-
-		co->index = i;
-		port->cons = co;
-		return pl011_console_setup(co, options);
-	}
-
-	return -ENODEV;
-}
-
 static struct uart_driver amba_reg;
 static struct console amba_console = {
 	.name		= "ttyAMA",
 	.write		= pl011_console_write,
 	.device		= uart_console_device,
 	.setup		= pl011_console_setup,
-	.match		= pl011_console_match,
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &amba_reg,