ARM: imx: clean up machine mxc_arch_reset_init_dt reset init

System restart mechanism has been changed with the introduction
of "kernel restart handler call chain support". The imx2 watchdog
based restart handler has been moved to the driver, and these
restart can be removed from the machine layer.

This patch cleans up the device tree version machine reset init with
mxc_arch_reset_init_dt and removes corresponding .restart handler,
for the .init_machine that can be handled by system default after
removing the mxc_arch_reset_init_dt, the .init_machine is also removed.
Signed-off-by: NJingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

arch/arm/mach-imx/common.h

@@ -61,7 +61,6 @@ struct platform_device *mxc_register_gpio(char *name, int id,
 void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
-void mxc_arch_reset_init_dt(void);
 int mx51_revision(void);
 int mx53_revision(void);
 void imx_set_aips(void __iomem *);

arch/arm/mach-imx/imx25-dt.c

@@ -17,13 +17,6 @@
 #include "common.h"
 #include "mx25.h"
 
-static void __init imx25_dt_init(void)
-{
-	mxc_arch_reset_init_dt();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
 	NULL
@@ -33,7 +26,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.map_io		= mx25_map_io,
 	.init_early	= imx25_init_early,
 	.init_irq	= mx25_init_irq,
-	.init_machine	= imx25_dt_init,
 	.dt_compat	= imx25_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/imx27-dt.c

@@ -22,8 +22,6 @@ static void __init imx27_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
 
-	mxc_arch_reset_init_dt();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register_full(&devinfo);
@@ -40,5 +38,4 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.init_irq	= mx27_init_irq,
 	.init_machine	= imx27_dt_init,
 	.dt_compat	= imx27_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/imx31-dt.c

@@ -18,13 +18,6 @@
 #include "common.h"
 #include "mx31.h"
 
-static void __init imx31_dt_init(void)
-{
-	mxc_arch_reset_init_dt();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const imx31_dt_board_compat[] __initconst = {
 	"fsl,imx31",
 	NULL
@@ -40,7 +33,5 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
 	.init_time	= imx31_dt_timer_init,
-	.init_machine	= imx31_dt_init,
 	.dt_compat	= imx31_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/imx35-dt.c

@@ -20,14 +20,6 @@
 #include "common.h"
 #include "mx35.h"
 
-static void __init imx35_dt_init(void)
-{
-	mxc_arch_reset_init_dt();
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     NULL, NULL);
-}
-
 static void __init imx35_irq_init(void)
 {
 	imx_init_l2cache();
@@ -43,7 +35,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
 	.init_irq	= imx35_irq_init,
-	.init_machine	= imx35_dt_init,
 	.dt_compat	= imx35_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx50.c

@@ -16,13 +16,6 @@
 
 #include "common.h"
 
-static void __init imx50_dt_init(void)
-{
-	mxc_arch_reset_init_dt();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const imx50_dt_board_compat[] __initconst = {
 	"fsl,imx50",
 	NULL
@@ -30,7 +23,5 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
 	.init_irq	= tzic_init_irq,
-	.init_machine	= imx50_dt_init,
 	.dt_compat	= imx50_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx51.c

@@ -53,7 +53,6 @@ static void __init imx51_dt_init(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
 
-	mxc_arch_reset_init_dt();
 	imx51_ipu_mipi_setup();
 	imx_src_init();
 
@@ -78,5 +77,4 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx53.c

@@ -30,7 +30,6 @@ static void __init imx53_init_early(void)
 
 static void __init imx53_dt_init(void)
 {
-	mxc_arch_reset_init_dt();
 	imx_src_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -54,5 +53,4 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6q.c

@@ -268,8 +268,6 @@ static void __init imx6q_init_machine(void)
 	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
 			      imx_get_soc_revision());
 
-	mxc_arch_reset_init_dt();
-
 	parent = imx_soc_device_init();
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
@@ -409,5 +407,4 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6sl.c

@@ -48,8 +48,6 @@ static void __init imx6sl_init_machine(void)
 {
 	struct device *parent;
 
-	mxc_arch_reset_init_dt();
-
 	parent = imx_soc_device_init();
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
@@ -81,5 +79,4 @@ DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
 	.init_machine	= imx6sl_init_machine,
 	.init_late      = imx6sl_init_late,
 	.dt_compat	= imx6sl_dt_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6sx.c

@@ -18,8 +18,6 @@ static void __init imx6sx_init_machine(void)
 {
 	struct device *parent;
 
-	mxc_arch_reset_init_dt();
-
 	parent = imx_soc_device_init();
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
@@ -58,5 +56,4 @@ DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
 	.init_machine	= imx6sx_init_machine,
 	.dt_compat	= imx6sx_dt_compat,
 	.init_late	= imx6sx_init_late,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-vf610.c

@@ -12,14 +12,6 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
-#include "common.h"
-
-static void __init vf610_init_machine(void)
-{
-	mxc_arch_reset_init_dt();
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char * const vf610_dt_compat[] __initconst = {
 	"fsl,vf610",
 	NULL,
@@ -28,7 +20,5 @@ static const char * const vf610_dt_compat[] __initconst = {
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
-	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/system.c

@@ -89,21 +89,6 @@ void __init mxc_arch_reset_init(void __iomem *base)
 		clk_prepare(wdog_clk);
 }
 
-void __init mxc_arch_reset_init_dt(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt");
-	wdog_base = of_iomap(np, 0);
-	WARN_ON(!wdog_base);
-
-	wdog_clk = of_clk_get(np, 0);
-	if (IS_ERR(wdog_clk))
-		pr_warn("%s: failed to get wdog clock\n", __func__);
-	else
-		clk_prepare(wdog_clk);
-}
-
 #ifdef CONFIG_CACHE_L2X0
 void __init imx_init_l2cache(void)
 {