i2c: designware-pci: Add Baytrail PCI IDs

Intel Baytrail I2C controllers can be enumerated from PCI as well as from
ACPI. In order to support this add the Baytrail PCI IDs to the driver.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -54,6 +54,8 @@ enum dw_pci_ctl_id_t {
 	medfield_3,
 	medfield_4,
 	medfield_5,
+
+	baytrail,
 };
 
 struct dw_pci_controller {
@@ -132,6 +134,13 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
 		.rx_fifo_depth = 32,
 		.clk_khz      = 25000,
 	},
+	[baytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.clk_khz = 100000,
+	},
 };
 static struct i2c_algorithm i2c_dw_algo = {
 	.master_xfer	= i2c_dw_xfer,
@@ -226,8 +235,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap->algo = &i2c_dw_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->nr = controller->bus_num;
-	snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
-		adap->nr);
+
+	snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci");
 
 	r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED,
 			adap->name, dev);
@@ -278,6 +287,14 @@ static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
 	{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
 	{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
 	{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+	/* Baytrail */
+	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);