提交 086a2e0a 编写于 作者: F Franky Lin 提交者: John W. Linville

brcm80211: fmac: add coredisable function for bcm4330 chip

This patch is part of the series of adding new backplane support
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 523894f2
......@@ -3098,7 +3098,6 @@ static int brcmf_sdbrcm_download_state(struct brcmf_bus *bus, bool enter)
{
uint retries;
int bcmerror = 0;
u8 idx;
struct chip_info *ci = bus->ci;
/* To enter download state, disable ARM and reset SOCRAM.
......@@ -3107,11 +3106,10 @@ static int brcmf_sdbrcm_download_state(struct brcmf_bus *bus, bool enter)
if (enter) {
bus->alp_only = true;
idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
brcmf_sdio_chip_coredisable(bus->sdiodev, ci->c_inf[idx].base);
ci->coredisable(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_INTERNAL_MEM);
brcmf_sdio_chip_resetcore(bus->sdiodev, ci->c_inf[idx].base);
brcmf_sdio_chip_resetcore(bus->sdiodev, ci,
BCMA_CORE_INTERNAL_MEM);
/* Clear the top bit of memory */
if (bus->ramsize) {
......@@ -3135,8 +3133,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_bus *bus, bool enter)
w_sdreg32(bus, 0xFFFFFFFF,
offsetof(struct sdpcmd_regs, intstatus), &retries);
idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
brcmf_sdio_chip_resetcore(bus->sdiodev, ci->c_inf[idx].base);
brcmf_sdio_chip_resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
/* Allow HT Clock now that the ARM is running. */
bus->alp_only = false;
......
......@@ -166,124 +166,165 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev,
return ret;
}
void
brcmf_sdio_chip_coredisable(struct brcmf_sdio_dev *sdiodev, u32 corebase)
static void
brcmf_sdio_sb_coredisable(struct brcmf_sdio_dev *sdiodev,
struct chip_info *ci, u16 coreid)
{
u32 regdata;
u8 idx;
idx = brcmf_sdio_chip_getinfidx(ci, coreid);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
if (regdata & SSB_TMSLOW_RESET)
return;
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
if ((regdata & SSB_TMSLOW_CLOCK) != 0) {
/*
* set target reject and spin until busy is clear
* (preserve core-specific bits)
*/
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4);
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow),
4, regdata | SSB_TMSLOW_REJECT);
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
4, regdata | SSB_TMSLOW_REJECT);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
udelay(1);
SPINWAIT((brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatehigh), 4) &
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4) &
SSB_TMSHIGH_BUSY), 100000);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatehigh), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4);
if (regdata & SSB_TMSHIGH_BUSY)
brcmf_dbg(ERROR, "core state still busy\n");
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbidlow), 4);
CORE_SB(ci->c_inf[idx].base, sbidlow), 4);
if (regdata & SSB_IDLOW_INITIATOR) {
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbimstate), 4) |
CORE_SB(ci->c_inf[idx].base, sbimstate), 4) |
SSB_IMSTATE_REJECT;
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(corebase, sbimstate), 4,
CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
regdata);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbimstate), 4);
CORE_SB(ci->c_inf[idx].base, sbimstate), 4);
udelay(1);
SPINWAIT((brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbimstate), 4) &
CORE_SB(ci->c_inf[idx].base, sbimstate), 4) &
SSB_IMSTATE_BUSY), 100000);
}
/* set reset and reject while enabling the clocks */
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
(SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatelow), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4);
udelay(10);
/* clear the initiator reject bit */
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbidlow), 4);
CORE_SB(ci->c_inf[idx].base, sbidlow), 4);
if (regdata & SSB_IDLOW_INITIATOR) {
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbimstate), 4) &
CORE_SB(ci->c_inf[idx].base, sbimstate), 4) &
~SSB_IMSTATE_REJECT;
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(corebase, sbimstate), 4,
CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
regdata);
}
}
/* leave reset and reject asserted */
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), 4,
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
(SSB_TMSLOW_REJECT | SSB_TMSLOW_RESET));
udelay(1);
}
static void
brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev,
struct chip_info *ci, u16 coreid)
{
u8 idx;
u32 regdata;
idx = brcmf_sdio_chip_getinfidx(ci, coreid);
/* if core is already in reset, just return */
regdata = brcmf_sdcard_reg_read(sdiodev,
ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
4);
if ((regdata & BCMA_RESET_CTL_RESET) != 0)
return;
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL,
4, 0);
regdata = brcmf_sdcard_reg_read(sdiodev,
ci->c_inf[idx].wrapbase+BCMA_IOCTL, 4);
udelay(10);
brcmf_sdcard_reg_write(sdiodev, ci->c_inf[idx].wrapbase+BCMA_RESET_CTL,
4, BCMA_RESET_CTL_RESET);
udelay(1);
}
void
brcmf_sdio_chip_resetcore(struct brcmf_sdio_dev *sdiodev, u32 corebase)
brcmf_sdio_chip_resetcore(struct brcmf_sdio_dev *sdiodev,
struct chip_info *ci, u16 coreid)
{
u32 regdata;
u8 idx;
idx = brcmf_sdio_chip_getinfidx(ci, coreid);
/*
* Must do the disable sequence first to work for
* arbitrary current core state.
*/
brcmf_sdio_chip_coredisable(sdiodev, corebase);
ci->coredisable(sdiodev, ci, coreid);
/*
* Now do the initialization sequence.
* set reset while enabling the clock and
* forcing them on throughout the core
*/
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), 4,
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET);
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET);
udelay(1);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbtmstatehigh), 4);
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4);
if (regdata & SSB_TMSHIGH_SERR)
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(corebase, sbtmstatehigh), 4, 0);
CORE_SB(ci->c_inf[idx].base, sbtmstatehigh), 4, 0);
regdata = brcmf_sdcard_reg_read(sdiodev,
CORE_SB(corebase, sbimstate), 4);
CORE_SB(ci->c_inf[idx].base, sbimstate), 4);
if (regdata & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO))
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbimstate), 4,
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbimstate), 4,
regdata & ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO));
/* clear reset and allow it to propagate throughout the core */
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow), 4,
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow), 4,
SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK);
udelay(1);
/* leave clock enabled */
brcmf_sdcard_reg_write(sdiodev, CORE_SB(corebase, sbtmstatelow),
brcmf_sdcard_reg_write(sdiodev,
CORE_SB(ci->c_inf[idx].base, sbtmstatelow),
4, SSB_TMSLOW_CLOCK);
udelay(1);
}
......@@ -329,10 +370,12 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev,
case SOCI_SB:
ci->iscoreup = brcmf_sdio_sb_iscoreup;
ci->corerev = brcmf_sdio_sb_corerev;
ci->coredisable = brcmf_sdio_sb_coredisable;
break;
case SOCI_AI:
ci->iscoreup = brcmf_sdio_ai_iscoreup;
ci->corerev = brcmf_sdio_ai_corerev;
ci->coredisable = brcmf_sdio_ai_coredisable;
break;
default:
brcmf_dbg(ERROR, "socitype %u not supported\n", ci->socitype);
......@@ -395,7 +438,6 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
struct chip_info *ci)
{
u32 regdata;
u8 idx;
/* get chipcommon rev */
ci->c_inf[0].rev = ci->corerev(sdiodev, ci, ci->c_inf[0].id);
......@@ -425,8 +467,7 @@ brcmf_sdio_chip_buscoresetup(struct brcmf_sdio_dev *sdiodev,
* Make sure any on-chip ARM is off (in case strapping is wrong),
* or downloaded code was already running.
*/
idx = brcmf_sdio_chip_getinfidx(ci, BCMA_CORE_ARM_CM3);
brcmf_sdio_chip_coredisable(sdiodev, ci->c_inf[idx].base);
ci->coredisable(sdiodev, ci, BCMA_CORE_ARM_CM3);
}
int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
......
......@@ -78,6 +78,8 @@ struct chip_info {
u16 coreid);
u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci,
u16 coreid);
void (*coredisable)(struct brcmf_sdio_dev *sdiodev,
struct chip_info *ci, u16 coreid);
};
struct sbconfig {
......@@ -121,9 +123,7 @@ struct sbconfig {
};
extern void brcmf_sdio_chip_resetcore(struct brcmf_sdio_dev *sdiodev,
u32 corebase);
extern void brcmf_sdio_chip_coredisable(struct brcmf_sdio_dev *sdiodev,
u32 corebase);
struct chip_info *ci, u16 coreid);
extern int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
struct chip_info **ci_ptr, u32 regs);
extern void brcmf_sdio_chip_detach(struct chip_info **ci_ptr);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册