提交 080eba78 编写于 作者: L Linus Torvalds

Merge tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a small number of char/misc driver fixes for 5.17-rc4 for
  reported issues. They contain:

   - phy driver fixes

   - iio driver fix

   - eeprom driver fix

   - speakup regression fix

   - fastrpc fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
  speakup-dectlk: Restore pitch setting
  bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
  bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
  eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
  misc: fastrpc: avoid double fput() on failed usercopy
  phy: dphy: Correct clk_pre parameter
  phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
  phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
  phy: xilinx: zynqmp: Fix bus width setting for SGMII
  phy: cadence: Sierra: fix error handling bugs in probe()
  phy: ti: Fix missing sentinel for clk_div_table
  phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
  phy: usb: Leave some clocks running during suspend
......@@ -44,6 +44,7 @@ static struct var_t vars[] = {
{ CAPS_START, .u.s = {"[:dv ap 160] " } },
{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },
......
......@@ -366,6 +366,7 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
.config = &modem_foxconn_sdx55_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.mru_default = 32768,
.sideband_wake = false,
};
......@@ -401,6 +402,7 @@ static const struct mhi_pci_dev_info mhi_mv31_info = {
.config = &modem_mv31_config,
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
.dma_data_width = 32,
.mru_default = 32768,
};
static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {
......
......@@ -7,6 +7,7 @@
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/math64.h>
......@@ -196,12 +197,9 @@ static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
/*
* ui2bc - UI time periods to byte clock cycles
*/
static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
static u32 ui2bc(unsigned int ui)
{
u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
return DIV64_U64_ROUND_UP(ui * dsi->lanes,
dsi->mode.clock * 1000 * bpp);
return DIV_ROUND_UP(ui, BITS_PER_BYTE);
}
/*
......@@ -232,12 +230,12 @@ static int nwl_dsi_config_host(struct nwl_dsi *dsi)
}
/* values in byte clock cycles */
cycles = ui2bc(dsi, cfg->clk_pre);
cycles = ui2bc(cfg->clk_pre);
DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
cycles += ui2bc(dsi, cfg->clk_pre);
cycles += ui2bc(cfg->clk_pre);
DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
cycles = ps2bc(dsi, cfg->hs_exit);
......
......@@ -1569,9 +1569,17 @@ static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg
}
if (copy_to_user(ival, &fd, sizeof(fd))) {
put_unused_fd(fd);
ret = -EFAULT;
goto error_free_ib;
/*
* "Leak" the fd, as there's not much we can do about this
* anyway. 'fd' might have been closed already, as
* anon_inode_getfd() called fd_install() on it, which made
* it reachable by userland.
*
* Instead of allowing a malicious user to play tricks with
* us, rely on the process exit path to do any necessary
* cleanup, as in releasing the file, if still needed.
*/
return -EFAULT;
}
return 0;
......
......@@ -114,6 +114,9 @@ static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
if (offset + count > EE1004_PAGE_SIZE)
count = EE1004_PAGE_SIZE - offset;
if (count > I2C_SMBUS_BLOCK_MAX)
count = I2C_SMBUS_BLOCK_MAX;
return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
}
......
......@@ -1288,7 +1288,14 @@ static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
}
if (copy_to_user(argp, &bp, sizeof(bp))) {
dma_buf_put(buf->dmabuf);
/*
* The usercopy failed, but we can't do much about it, as
* dma_buf_fd() already called fd_install() and made the
* file descriptor accessible for the current process. It
* might already be closed and dmabuf no longer valid when
* we reach this point. Therefore "leak" the fd and rely on
* the process exit path to do any required cleanup.
*/
return -EFAULT;
}
......
......@@ -9,6 +9,7 @@
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
......@@ -250,7 +251,7 @@ static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
(DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
(DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
DIV_ROUND_UP(priv->config.clk_pre, temp));
DIV_ROUND_UP(priv->config.clk_pre, BITS_PER_BYTE));
regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
DIV_ROUND_UP(priv->config.hs_exit, temp) |
......
......@@ -97,8 +97,7 @@ config PHY_BRCM_USB
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB if ARCH_BRCMSTB
default ARCH_BCM4908
default ARCH_BRCMSTB
default ARCH_BCM4908 || ARCH_BRCMSTB
help
Enable this to support the Broadcom STB USB PHY.
This driver is required by the USB XHCI, EHCI and OHCI
......
......@@ -18,6 +18,7 @@
#include <linux/soc/brcmstb/brcmstb.h>
#include <dt-bindings/phy/phy.h>
#include <linux/mfd/syscon.h>
#include <linux/suspend.h>
#include "phy-brcm-usb-init.h"
......@@ -70,12 +71,35 @@ struct brcm_usb_phy_data {
int init_count;
int wake_irq;
struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX];
struct notifier_block pm_notifier;
bool pm_active;
};
static s8 *node_reg_names[BRCM_REGS_MAX] = {
"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
};
static int brcm_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event,
void *unused)
{
struct brcm_usb_phy_data *priv =
container_of(notifier, struct brcm_usb_phy_data, pm_notifier);
switch (pm_event) {
case PM_HIBERNATION_PREPARE:
case PM_SUSPEND_PREPARE:
priv->pm_active = true;
break;
case PM_POST_RESTORE:
case PM_POST_HIBERNATION:
case PM_POST_SUSPEND:
priv->pm_active = false;
break;
}
return NOTIFY_DONE;
}
static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
{
struct phy *gphy = dev_id;
......@@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy)
struct brcm_usb_phy_data *priv =
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
if (priv->pm_active)
return 0;
/*
* Use a lock to make sure a second caller waits until
* the base phy is inited before using it.
......@@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy)
struct brcm_usb_phy_data *priv =
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
if (priv->pm_active)
return 0;
dev_dbg(&gphy->dev, "EXIT\n");
if (phy->id == BRCM_USB_PHY_2_0)
brcm_usb_uninit_eohci(&priv->ini);
......@@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
if (err)
return err;
priv->pm_notifier.notifier_call = brcm_pm_notifier;
register_pm_notifier(&priv->pm_notifier);
mutex_init(&priv->mutex);
/* make sure invert settings are correct */
......@@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
static int brcm_usb_phy_remove(struct platform_device *pdev)
{
struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev);
sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
unregister_pm_notifier(&priv->pm_notifier);
return 0;
}
......@@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev)
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
if (priv->init_count) {
dev_dbg(dev, "SUSPEND\n");
priv->ini.wake_enabled = device_may_wakeup(dev);
if (priv->phys[BRCM_USB_PHY_3_0].inited)
brcm_usb_uninit_xhci(&priv->ini);
......@@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev)
* Uninitialize anything that wasn't previously initialized.
*/
if (priv->init_count) {
dev_dbg(dev, "RESUME\n");
if (priv->wake_irq >= 0)
disable_irq_wake(priv->wake_irq);
brcm_usb_init_common(&priv->ini);
......
......@@ -1338,7 +1338,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct cdns_sierra_data *data;
unsigned int id_value;
int i, ret, node = 0;
int ret, node = 0;
void __iomem *base;
struct device_node *dn = dev->of_node, *child;
......@@ -1416,7 +1416,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
dev_err(dev, "failed to get reset %s\n",
child->full_name);
ret = PTR_ERR(sp->phys[node].lnk_rst);
goto put_child2;
of_node_put(child);
goto put_control;
}
if (!sp->autoconf) {
......@@ -1424,7 +1425,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "missing property in node %s\n",
child->name);
goto put_child;
of_node_put(child);
reset_control_put(sp->phys[node].lnk_rst);
goto put_control;
}
}
......@@ -1434,7 +1437,9 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (IS_ERR(gphy)) {
ret = PTR_ERR(gphy);
goto put_child;
of_node_put(child);
reset_control_put(sp->phys[node].lnk_rst);
goto put_control;
}
sp->phys[node].phy = gphy;
phy_set_drvdata(gphy, &sp->phys[node]);
......@@ -1446,26 +1451,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
if (sp->num_lanes > SIERRA_MAX_LANES) {
ret = -EINVAL;
dev_err(dev, "Invalid lane configuration\n");
goto put_child2;
goto put_control;
}
/* If more than one subnode, configure the PHY as multilink */
if (!sp->autoconf && sp->nsubnodes > 1) {
ret = cdns_sierra_phy_configure_multilink(sp);
if (ret)
goto put_child2;
goto put_control;
}
pm_runtime_enable(dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
put_child:
node++;
put_child2:
for (i = 0; i < node; i++)
reset_control_put(sp->phys[i].lnk_rst);
of_node_put(child);
if (IS_ERR(phy_provider)) {
ret = PTR_ERR(phy_provider);
goto put_control;
}
return 0;
put_control:
while (--node >= 0)
reset_control_put(sp->phys[node].lnk_rst);
clk_disable:
cdns_sierra_phy_disable_clocks(sp);
reset_control_assert(sp->apb_rst);
......
......@@ -992,7 +992,7 @@ static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instanc
/* no efuse, ignore it */
if (!instance->efuse_intr &&
!instance->efuse_rx_imp &&
!instance->efuse_rx_imp) {
!instance->efuse_tx_imp) {
dev_warn(dev, "no u3 intr efuse, but dts enable it\n");
instance->efuse_sw_en = 0;
break;
......
......@@ -36,7 +36,7 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
cfg->clk_miss = 0;
cfg->clk_post = 60000 + 52 * ui;
cfg->clk_pre = 8000;
cfg->clk_pre = 8;
cfg->clk_prepare = 38000;
cfg->clk_settle = 95000;
cfg->clk_term_en = 0;
......@@ -97,7 +97,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
if (cfg->clk_post < (60000 + 52 * ui))
return -EINVAL;
if (cfg->clk_pre < 8000)
if (cfg->clk_pre < 8)
return -EINVAL;
if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000)
......
......@@ -5,6 +5,7 @@
* Author: Wyon Bi <bivvy.bi@rock-chips.com>
*/
#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
......@@ -364,7 +365,7 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno)
* The value of counter for HS Tclk-pre
* Tclk-pre = Tpin_txbyteclkhs * value
*/
clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs);
clk_pre = DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE);
/*
* The value of counter for HS Tlpx Time
......
......@@ -304,7 +304,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
ret = __stm32_usbphyc_pll_disable(usbphyc);
if (ret)
return ret;
goto dec_n_pll_cons;
}
ret = stm32_usbphyc_regulators_enable(usbphyc);
......
......@@ -233,6 +233,7 @@ static const struct clk_div_table clk_div_table[] = {
{ .val = 1, .div = 2, },
{ .val = 2, .div = 4, },
{ .val = 3, .div = 8, },
{ /* sentinel */ },
};
static const struct wiz_clk_div_sel clk_div_sel[] = {
......
......@@ -134,7 +134,8 @@
#define PROT_BUS_WIDTH_10 0x0
#define PROT_BUS_WIDTH_20 0x1
#define PROT_BUS_WIDTH_40 0x2
#define PROT_BUS_WIDTH_SHIFT 2
#define PROT_BUS_WIDTH_SHIFT(n) ((n) * 2)
#define PROT_BUS_WIDTH_MASK(n) GENMASK((n) * 2 + 1, (n) * 2)
/* Number of GT lanes */
#define NUM_LANES 4
......@@ -445,12 +446,12 @@ static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
{
struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
u32 mask = PROT_BUS_WIDTH_MASK(gtr_phy->lane);
u32 val = PROT_BUS_WIDTH_10 << PROT_BUS_WIDTH_SHIFT(gtr_phy->lane);
/* Set SGMII protocol TX and RX bus width to 10 bits. */
xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, mask, val);
xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, mask, val);
xpsgtr_bypass_scrambler_8b10b(gtr_phy);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册