提交 077e81d5 编写于 作者: L Linus Torvalds

Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Another bunch  of driver fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sprd: depend on COMMON_CLK to fix compile tests
  Revert "i2c: imx: Remove unused .id_table support"
  i2c: octeon: check correct size of maximum RECV_LEN packet
  i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
  i2c: bpmp-tegra: Ignore unknown I2C_M flags
  i2c: tegra: Wait for config load atomically while in ISR
......@@ -1013,6 +1013,7 @@ config I2C_SIRF
config I2C_SPRD
tristate "Spreadtrum I2C interface"
depends on I2C=y && (ARCH_SPRD || COMPILE_TEST)
depends on COMMON_CLK
help
If you say yes to this option, support will be included for the
Spreadtrum I2C interface.
......
......@@ -241,6 +241,19 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = {
};
static const struct platform_device_id imx_i2c_devtype[] = {
{
.name = "imx1-i2c",
.driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
}, {
.name = "imx21-i2c",
.driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
static const struct of_device_id i2c_imx_dt_ids[] = {
{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
......@@ -1330,7 +1343,11 @@ static int i2c_imx_probe(struct platform_device *pdev)
return -ENOMEM;
match = device_get_match_data(&pdev->dev);
i2c_imx->hwdata = match;
if (match)
i2c_imx->hwdata = match;
else
i2c_imx->hwdata = (struct imx_i2c_hwdata *)
platform_get_device_id(pdev)->driver_data;
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
......@@ -1498,6 +1515,7 @@ static struct platform_driver i2c_imx_driver = {
.of_match_table = i2c_imx_dt_ids,
.acpi_match_table = i2c_imx_acpi_ids,
},
.id_table = imx_i2c_devtype,
};
static int __init i2c_adap_imx_init(void)
......
......@@ -347,7 +347,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
if (result)
return result;
if (recv_len && i == 0) {
if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
if (data[i] > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
length += data[i];
}
......
......@@ -80,7 +80,7 @@ static int tegra_bpmp_xlate_flags(u16 flags, u16 *out)
flags &= ~I2C_M_RECV_LEN;
}
return (flags != 0) ? -EINVAL : 0;
return 0;
}
/**
......
......@@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
/* read back register to make sure that register writes completed */
if (reg != I2C_TX_FIFO)
readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
else if (i2c_dev->is_vi)
readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
}
static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
......@@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
}
static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
unsigned int reg, unsigned int len)
{
u32 *data32 = data;
/*
* VI I2C controller has known hardware bug where writes get stuck
* when immediate multiple writes happen to TX_FIFO register.
* Recommended software work around is to read I2C register after
* each write to TX_FIFO register to flush out the data.
*/
while (len--)
i2c_writel(i2c_dev, *data32++, reg);
}
static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
unsigned int reg, unsigned int len)
{
......@@ -533,7 +550,7 @@ static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
u32 val;
if (!i2c_dev->atomic_mode)
if (!i2c_dev->atomic_mode && !in_irq())
return readl_relaxed_poll_timeout(addr, val, !(val & mask),
delay_us, timeout_us);
......@@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
i2c_dev->msg_buf_remaining = buf_remaining;
i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
if (i2c_dev->is_vi)
i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
else
i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
buf += words_to_transfer * BYTES_PER_FIFO_WORD;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册