of: update ePAPR references to point to Devicetree Specification

The Devicetree Specification has superseded the ePAPR as the
base specification for bindings.  Update files in Documentation
to reference the new document.

First reference to ePAPR in Documentation/devicetree/bindings/arm/cci.txt
is generic, remove it.

Some files are not updated because there is no hypervisor chapter
in the Devicetree Specification:
   Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
   Documenation/virtual/kvm/api.txt
   Documenation/virtual/kvm/ppc-pv.txt
Signed-off-by: NFrank Rowand <frank.rowand@sony.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/cci.txt

@@ -11,13 +11,6 @@ clusters, through memory mapped interface, with a global control register
 space and multiple sets of interface control registers, one per slave
 interface.
 
-Bindings for the CCI node follow the ePAPR standard, available from:
-
-www.power.org/documentation/epapr-version-1-1/
-
-with the addition of the bindings described in this document which are
-specific to ARM.
-
 * CCI interconnect node
 
 	Description: Describes a CCI cache coherent Interconnect component
@@ -50,10 +43,10 @@ specific to ARM.
 			    as a tuple of cells, containing child address,
 			    parent address and the size of the region in the
 			    child address space.
-		Definition: A standard property. Follow rules in the ePAPR for
-			    hierarchical bus addressing. CCI interfaces
-			    addresses refer to the parent node addressing
-			    scheme to declare their register bases.
+		Definition: A standard property. Follow rules in the Devicetree
+			    Specification for hierarchical bus addressing. CCI
+			    interfaces addresses refer to the parent node
+			    addressing scheme to declare their register bases.
 
 	CCI interconnect node can define the following child nodes:
 

Documentation/devicetree/bindings/arm/cpus.txt

@@ -6,9 +6,9 @@ The device tree allows to describe the layout of CPUs in a system through
 the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
 defining properties for every cpu.
 
-Bindings for CPU nodes follow the ePAPR v1.1 standard, available from:
+Bindings for CPU nodes follow the Devicetree Specification, available from:
 
-https://www.power.org/documentation/epapr-version-1-1/
+https://www.devicetree.org/specifications/
 
 with updates for 32-bit and 64-bit ARM systems provided in this document.
 
@@ -16,8 +16,8 @@ with updates for 32-bit and 64-bit ARM systems provided in this document.
 Convention used in this document
 ================================
 
-This document follows the conventions described in the ePAPR v1.1, with
-the addition:
+This document follows the conventions described in the Devicetree
+Specification, with the addition:
 
 - square brackets define bitfields, eg reg[7:0] value of the bitfield in
   the reg property contained in bits 7 down to 0
@@ -26,8 +26,9 @@ the addition:
 cpus and cpu node bindings definition
 =====================================
 
-The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu
-nodes to be present and contain the properties described below.
+The ARM architecture, in accordance with the Devicetree Specification,
+requires the cpus and cpu nodes to be present and contain the properties
+described below.
 
 - cpus node
 

Documentation/devicetree/bindings/arm/idle-states.txt

@@ -695,5 +695,5 @@ cpus {
 [4] ARM Architecture Reference Manuals
     http://infocenter.arm.com/help/index.jsp
 
-[5] ePAPR standard
-    https://www.power.org/documentation/epapr-version-1-1/
+[5] Devicetree Specification
+    https://www.devicetree.org/specifications/

Documentation/devicetree/bindings/arm/l2c2x0.txt

@@ -4,8 +4,8 @@ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
 PL310 and variants) based level 2 cache controller. All these various implementations
 of the L2 cache controller have compatible programming models (Note 1).
 Some of the properties that are just prefixed "cache-*" are taken from section
-3.7.3 of the ePAPR v1.1 specification which can be found at:
-https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
+3.7.3 of the Devicetree Specification which can be found at:
+https://www.devicetree.org/specifications/
 
 The ARM L2 cache representation in the device tree should be done as follows:
 

Documentation/devicetree/bindings/arm/topology.txt

@@ -29,9 +29,9 @@ corresponding to the system hierarchy; syntactically they are defined as device
 tree nodes.
 
 The remainder of this document provides the topology bindings for ARM, based
-on the ePAPR standard, available from:
+on the Devicetree Specification, available from:
 
-http://www.power.org/documentation/epapr-version-1-1/
+https://www.devicetree.org/specifications/
 
 If not stated otherwise, whenever a reference to a cpu node phandle is made its
 value must point to a cpu node compliant with the cpu node bindings as

Documentation/devicetree/bindings/bus/simple-pm-bus.txt

@@ -10,7 +10,7 @@ enabled for child devices connected to the bus (either on-SoC or externally)
 to function.
 
 While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
-in ePAPR, it is not an extension of "simple-bus".
+in the Devicetree Specification, it is not an extension of "simple-bus".
 
 
 Required properties:

Documentation/devicetree/bindings/chosen.txt

@@ -10,7 +10,8 @@ stdout-path property
 --------------------
 
 Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in ePAPR, e.g.
+with a stdout-path property under /chosen, as described in the Devicetree
+Specification, e.g.
 
 / {
 	chosen {

Documentation/devicetree/bindings/common-properties.txt

 Common properties
 
-The ePAPR specification does not define any properties related to hardware
+The Devicetree Specification does not define any properties related to hardware
 byteswapping, but endianness issues show up frequently in porting Linux to
 different machine types.  This document attempts to provide a consistent
 way of handling byteswapping across drivers.

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -118,8 +118,8 @@ PROPERTIES
       Definition: A list of clock name strings in the same order as the
           clocks property.
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 
 EXAMPLE

Documentation/devicetree/bindings/crypto/fsl-sec6.txt

@@ -55,8 +55,8 @@ PROPERTIES
            triplet that includes the child address, parent address, &
            length.
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 EXAMPLE
 	crypto@a0000 {

Documentation/devicetree/bindings/interrupt-controller/open-pic.txt

@@ -92,7 +92,6 @@ Example 2:
 
 * References
 
-[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform
-    Requirements (ePAPR), Version 1.0, July 2008.
-    (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf)
+[1] Devicetree Specification
+    (https://www.devicetree.org/specifications/)
 

Documentation/devicetree/bindings/net/ethernet.txt

@@ -8,7 +8,8 @@ The following properties are common to the Ethernet controllers:
   property;
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
-  the maximum frame size (there's contradiction in ePAPR).
+  the maximum frame size (there's contradiction in the Devicetree
+  Specification).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
   * "mii"
@@ -32,9 +33,11 @@ The following properties are common to the Ethernet controllers:
   * "2000base-x",
   * "2500base-x",
   * "rxaui"
-- phy-connection-type: the same as "phy-mode" property but described in ePAPR;
+- phy-connection-type: the same as "phy-mode" property but described in the
+  Devicetree Specification;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
-  device; this property is described in ePAPR and so preferred;
+  device; this property is described in the Devicetree Specification and so
+  preferred;
 - phy: the same as "phy-handle" property, not recommended for new bindings.
 - phy-device: the same as "phy-handle" property, not recommended for new
   bindings.

Documentation/devicetree/bindings/powerpc/fsl/cpus.txt

@@ -3,10 +3,10 @@ Power Architecture CPU Binding
 Copyright 2013 Freescale Semiconductor Inc.
 
 Power Architecture CPUs in Freescale SOCs are represented in device trees as
-per the definition in ePAPR.
+per the definition in the Devicetree Specification.
 
-In addition to the ePAPR definitions, the properties defined below may be
-present on CPU nodes.
+In addition to the the Devicetree Specification definitions, the properties
+defined below may be present on CPU nodes.
 
 PROPERTIES
 

Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt

 Freescale L2 Cache Controller
 
 L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
-The cache bindings explained below are ePAPR compliant
+The cache bindings explained below are Devicetree Specification compliant
 
 Required Properties:
 

Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt

@@ -124,8 +124,8 @@ Port-Write Unit:
 		A single IRQ that handles port-write conditions is
 		specified by this property.  (Typically shared with error).
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 Example:
 	rmu: rmu@d3000 {

Documentation/devicetree/bindings/powerpc/fsl/srio.txt

@@ -72,7 +72,8 @@ the following properties:
 		represents the LIODN associated with maintenance transactions
 		for the port.
 
-Note: All other standard properties (see ePAPR) are allowed but are optional.
+Note: All other standard properties (see the Devicetree Specification)
+are allowed but are optional.
 
 Example:
 

Documentation/devicetree/booting-without-of.txt

@@ -1413,7 +1413,7 @@ Optional property:
 	from DMA operations originating from the bus. It provides a means of
 	defining a mapping or translation between the physical address space of
 	the bus and the physical address space of the parent of the bus.
-	(for more information see ePAPR specification)
+	(for more information see the Devicetree Specification)
 
 * DMA Bus child
 Optional property:

Documentation/devicetree/usage-model.txt

@@ -387,7 +387,7 @@ static void __init harmony_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-"simple-bus" is defined in the ePAPR 1.0 specification as a property
+"simple-bus" is defined in the Devicetree Specification as a property
 meaning a simple memory mapped bus, so the of_platform_populate() code
 could be written to just assume simple-bus compatible nodes will
 always be traversed.  However, we pass it in as an argument so that

Documentation/xtensa/mmu.txt

@@ -41,9 +41,9 @@ The scheme below assumes that the kernel is loaded below 0x40000000.
  00..1F -> 00  -> 00  -> 00
 
 The default location of IO peripherals is above 0xf0000000. This may be changed
-using a "ranges" property in a device tree simple-bus node. See ePAPR 1.1, §6.5
-for details on the syntax and semantic of simple-bus nodes. The following
-limitations apply:
+using a "ranges" property in a device tree simple-bus node. See the Devicetree
+Specification, section 4.5 for details on the syntax and semantics of
+simple-bus nodes. The following limitations apply:
 
 1. Only top level simple-bus nodes are considered