ARM: boot: dts: Add Western Digital My Book World Edition device tree

Add Western Digital My Book World Edition device tree based on
Oxford Semiconductor OX810SE SoC.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>

arch/arm/boot/dts/Makefile

@@ -538,6 +538,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += \
+	wd-mbwe.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \

arch/arm/boot/dts/wd-mbwe.dts

+/*
+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox810se.dtsi"
+
+/ {
+	model = "Western Digital My Book World Edition";
+
+	compatible = "wd,mbwe", "oxsemi,ox810se";
+
+	chosen {
+		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x48000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power {
+			label = "power";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+
+		recovery {
+			label = "recovery";
+			gpios = <&gpio0 4 1>;
+			linux,code = <0xab>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		a0 {
+			label = "activity0";
+			gpios = <&gpio0 25 0>;
+			default-state = "keep";
+		};
+
+		a1 {
+			label = "activity1";
+			gpios = <&gpio0 26 0>;
+			default-state = "keep";
+		};
+
+		a2 {
+			label = "activity2";
+			gpios = <&gpio0 5 0>;
+			default-state = "keep";
+		};
+
+		a3 {
+			label = "activity3";
+			gpios = <&gpio0 6 0>;
+			default-state = "keep";
+		};
+
+		a4 {
+			label = "activity4";
+			gpios = <&gpio0 7 0>;
+			default-state = "keep";
+		};
+
+		a5 {
+			label = "activity5";
+			gpios = <&gpio1 2 0>;
+			default-state = "keep";
+		};
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+		gpios = <&gpio0 3 0 /* sda */
+			 &gpio0 2 0 /* scl */
+			 >;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc0: rtc@48 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};