RealView: Move the EB GIC definitions to the board file

This is in preparation for the RealView PB11MPCore and PB1176 patches
which have different base addresses for the GIC.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

arch/arm/mach-realview/realview_eb.c

@@ -51,13 +51,13 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_GIC_CPU_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
@@ -286,14 +286,14 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
-		gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
+		gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
+		gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
 	} else {
 		/* board GIC, primary */
-		gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+		gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
 		gic_cpu_init(0, gic_cpu_base_addr);
 	}
 }

include/asm-arm/arch-realview/board-eb.h

@@ -26,6 +26,9 @@
 /*
  * RealView EB + ARM11MPCore peripheral addresses
  */
+#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */

include/asm-arm/arch-realview/platform.h

@@ -205,8 +205,6 @@
 	/* Reserved 0x1001A000 - 0x1001FFFF */
 #define REALVIEW_CLCD_BASE            0x10020000	/* CLCD */
 #define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-#define REALVIEW_GIC_CPU_BASE         0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_GIC_DIST_BASE        0x10041000	/* Generic interrupt controller distributor */
 #define REALVIEW_SMC_BASE             0x10080000	/* SMC */
 	/* Reserved 0x10090000 - 0x100EFFFF */