Merge branch 'pwm-dmtimer-fixes' into omap-for-v5.0/fixes-v2

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -644,6 +644,17 @@
 	};
 };
 
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
 /*
  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
  * uart1 wakeirq.

drivers/bus/ti-sysc.c

@@ -781,12 +781,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	/* Some timers on omap4 and later */
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */

drivers/clocksource/timer-ti-dm.c

@@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
 	if (IS_ERR(parent))
 		return -ENODEV;
 
+	/* Bail out if both clocks point to fck */
+	if (clk_is_match(parent, timer->fclk))
+		return 0;
+
 	ret = clk_set_parent(timer->fclk, parent);
 	if (ret < 0)
 		pr_err("%s: failed to set parent\n", __func__);
@@ -864,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	timer->pdev = pdev;
 
 	pm_runtime_enable(dev);
-	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		ret = pm_runtime_get_sync(dev);