提交 06767fb2 编写于 作者: I Imre Deak 提交者: Tony Lindgren

ARM: OMAP: N770: add missing LCD, LCD controller, touchscreen device registration

These were left out from the board file when merging these drivers,
add them here.

Call GPIO init from the board file as well, since the platform device init
code uses the GPIO API.
Signed-off-by: NImre Deak <imre.deak@solidboot.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Removed hwa742 init for now as it needs some clock updates.
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 4dcc6d24
......@@ -33,9 +33,13 @@
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
#include <asm/arch/lcd_mipid.h>
#include "../plat-omap/dsp/dsp_common.h"
#define ADS7846_PENDOWN_GPIO 15
static void __init omap_nokia770_init_irq(void)
{
/* On Nokia 770, the SleepX signal is masked with an
......@@ -96,6 +100,41 @@ static struct platform_device *nokia770_devices[] __initdata = {
&nokia770_kp_device,
};
static void mipid_shutdown(struct mipid_platform_data *pdata)
{
if (pdata->nreset_gpio != -1) {
printk(KERN_INFO "shutdown LCD\n");
omap_set_gpio_dataout(pdata->nreset_gpio, 0);
msleep(120);
}
}
static struct mipid_platform_data nokia770_mipid_platform_data = {
.shutdown = mipid_shutdown,
};
static void mipid_dev_init(void)
{
const struct omap_lcd_config *conf;
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf != NULL) {
nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
nokia770_mipid_platform_data.data_lines = conf->data_lines;
}
}
static void ads7846_dev_init(void)
{
if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0)
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
}
static int ads7846_get_pendown_state(void)
{
return !omap_get_gpio_datain(ADS7846_PENDOWN_GPIO);
}
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
.x_max = 0x0fff,
.y_max = 0x0fff,
......@@ -103,6 +142,8 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
.pressure_max = 255,
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
.get_pendown_state = ads7846_get_pendown_state,
};
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
......@@ -111,6 +152,7 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
.platform_data = &nokia770_mipid_platform_data,
},
[1] = {
.modalias = "ads7846",
......@@ -287,8 +329,11 @@ static void __init omap_nokia770_init(void)
ARRAY_SIZE(nokia770_spi_board_info));
omap_board_config = nokia770_config;
omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_gpio_init();
omap_serial_init();
omap_dsp_init();
ads7846_dev_init();
mipid_dev_init();
}
static void __init omap_nokia770_map_io(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册