gpio: Add new flags to control sleep status of GPIOs

Add new flags to allow users to specify that they are not concerned with
the status of GPIOs whilst in a sleep/low power state.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/gpio/gpiolib-of.c

@@ -153,6 +153,9 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 			*flags |= GPIO_OPEN_SOURCE;
 	}
 
+	if (of_flags & OF_GPIO_SLEEP_MAY_LOOSE_VALUE)
+		*flags |= GPIO_SLEEP_MAY_LOOSE_VALUE;
+
 	return desc;
 }
 

drivers/gpio/gpiolib.c

@@ -2869,6 +2869,16 @@ bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset)
 }
 EXPORT_SYMBOL_GPL(gpiochip_line_is_open_source);
 
+bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset)
+{
+	if (offset >= chip->ngpio)
+		return false;
+
+	return !test_bit(FLAG_SLEEP_MAY_LOOSE_VALUE,
+			 &chip->gpiodev->descs[offset].flags);
+}
+EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
+
 /**
  * gpiod_get_raw_value_cansleep() - return a gpio's raw value
  * @desc: gpio whose value will be returned
@@ -3225,6 +3235,8 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
 	if (lflags & GPIO_OPEN_SOURCE)
 		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
+	if (lflags & GPIO_SLEEP_MAY_LOOSE_VALUE)
+		set_bit(FLAG_SLEEP_MAY_LOOSE_VALUE, &desc->flags);
 
 	/* No particular flag request, return here... */
 	if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {

drivers/gpio/gpiolib.h

@@ -190,6 +190,7 @@ struct gpio_desc {
 #define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
 #define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
 #define FLAG_IS_HOGGED	11	/* GPIO is hogged */
+#define FLAG_SLEEP_MAY_LOOSE_VALUE 12	/* GPIO may loose value in sleep */
 
 	/* Connection label */
 	const char		*label;

include/dt-bindings/gpio/gpio.h

@@ -28,4 +28,8 @@
 #define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_DRAIN)
 #define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_SOURCE)
 
+/* Bit 3 express GPIO suspend/resume persistence */
+#define GPIO_SLEEP_MAINTAIN_VALUE 0
+#define GPIO_SLEEP_MAY_LOOSE_VALUE 8
+
 #endif

include/linux/gpio/driver.h

@@ -213,6 +213,9 @@ bool gpiochip_line_is_irq(struct gpio_chip *chip, unsigned int offset);
 bool gpiochip_line_is_open_drain(struct gpio_chip *chip, unsigned int offset);
 bool gpiochip_line_is_open_source(struct gpio_chip *chip, unsigned int offset);
 
+/* Sleep persistence inquiry for drivers */
+bool gpiochip_line_is_persistent(struct gpio_chip *chip, unsigned int offset);
+
 /* get driver data */
 void *gpiochip_get_data(struct gpio_chip *chip);
 

include/linux/gpio/machine.h

@@ -9,6 +9,8 @@ enum gpio_lookup_flags {
 	GPIO_ACTIVE_LOW = (1 << 0),
 	GPIO_OPEN_DRAIN = (1 << 1),
 	GPIO_OPEN_SOURCE = (1 << 2),
+	GPIO_SLEEP_MAINTAIN_VALUE = (0 << 3),
+	GPIO_SLEEP_MAY_LOOSE_VALUE = (1 << 3),
 };
 
 /**

include/linux/of_gpio.h

@@ -31,6 +31,7 @@ enum of_gpio_flags {
 	OF_GPIO_ACTIVE_LOW = 0x1,
 	OF_GPIO_SINGLE_ENDED = 0x2,
 	OF_GPIO_OPEN_DRAIN = 0x4,
+	OF_GPIO_SLEEP_MAY_LOOSE_VALUE = 0x8,
 };
 
 #ifdef CONFIG_OF_GPIO