提交 05d2b093 编写于 作者: T Tero Kristo 提交者: Tony Lindgren

ARM: AM33xx: hwmod: remove am33xx specific module SoC opts

These are now identical with the OMAP4 implementations, so use the OMAP4
versions and remove the AM33xx ones.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Tested-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 2196a9b8
......@@ -984,25 +984,6 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
}
/**
* _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
* @oh: struct omap_hwmod *
*
* Enables the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _am33xx_enable_module(struct omap_hwmod *oh)
{
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: %s: %d\n",
oh->name, __func__, oh->prcm.omap4.modulemode);
omap_cm_module_enable(oh->prcm.omap4.modulemode, 0, oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
* @oh: struct omap_hwmod *
......@@ -1028,30 +1009,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs, 0);
}
/**
* _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to enter slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully enters
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_idle() function.
*/
static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
return omap_cm_wait_module_idle(0, oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs, 0);
}
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
......@@ -1865,36 +1822,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
return 0;
}
/**
* _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
* @oh: struct omap_hwmod *
*
* Disable the PRCM module mode related to the hwmod @oh.
* Return EINVAL if the modulemode is not supported and 0 in case of success.
*/
static int _am33xx_disable_module(struct omap_hwmod *oh)
{
int v;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return -EINVAL;
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
if (_are_any_hardreset_lines_asserted(oh))
return 0;
omap_cm_module_disable(0, oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs);
v = _am33xx_wait_target_disable(oh);
if (v)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
return 0;
}
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
......@@ -2973,32 +2900,6 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs, 0);
}
/**
* _am33xx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh || !oh->clkdm)
return -EINVAL;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!_find_mpu_rt_port(oh))
return 0;
/* XXX check module SIDLEMODE, hardreset status */
return omap_cm_wait_module_ready(0, oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs, 0);
}
/**
* _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to assert hardreset
......@@ -4227,9 +4128,9 @@ void __init omap_hwmod_init(void)
soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else if (soc_is_am33xx()) {
soc_ops.enable_module = _am33xx_enable_module;
soc_ops.disable_module = _am33xx_disable_module;
soc_ops.wait_target_ready = _am33xx_wait_target_ready;
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
soc_ops.assert_hardreset = _am33xx_assert_hardreset;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册