ath9k_hw: clean up ANI OFDM trigger handling

Adjust ah->config.ofdm_trig_{high,low} when setting noise immunity values
to simplify threshold checks in ath9k_hw_ani_monitor
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ani.c

@@ -179,6 +179,14 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 			ath9k_hw_ani_control(ah,
 				ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
 				entry_ofdm->ofdm_weak_signal_on);
+
+	if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI;
+	} else {
+		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI;
+		ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+	}
 }
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
@@ -428,21 +436,10 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	if (aniState->listenTime > ah->aniperiod) {
 		if (cckPhyErrRate < ah->config.cck_trig_low &&
-		    ((ofdmPhyErrRate < ah->config.ofdm_trig_low &&
-		      aniState->ofdmNoiseImmunityLevel <
-		      ATH9K_ANI_OFDM_DEF_LEVEL) ||
-		     (ofdmPhyErrRate < ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI &&
-		      aniState->ofdmNoiseImmunityLevel >=
-		      ATH9K_ANI_OFDM_DEF_LEVEL))) {
+		    ofdmPhyErrRate < ah->config.ofdm_trig_low) {
 			ath9k_hw_ani_lower_immunity(ah);
 			aniState->ofdmsTurn = !aniState->ofdmsTurn;
-		} else if ((ofdmPhyErrRate > ah->config.ofdm_trig_high &&
-			    aniState->ofdmNoiseImmunityLevel >=
-			    ATH9K_ANI_OFDM_DEF_LEVEL) ||
-			   (ofdmPhyErrRate >
-			    ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI &&
-			    aniState->ofdmNoiseImmunityLevel <
-			    ATH9K_ANI_OFDM_DEF_LEVEL)) {
+		} else if (ofdmPhyErrRate > ah->config.ofdm_trig_high) {
 			ath9k_hw_ani_ofdm_err_trigger(ah);
 			aniState->ofdmsTurn = false;
 		} else if (cckPhyErrRate > ah->config.cck_trig_high) {