pinctrl: sunxi: Add driver for Allwinner D1

This SoC contains a pinctrl with a new register layout. Use the variant
parameter to set the right register offsets. This pinctrl also increases
the number of functions per pin from 8 to 16, taking advantage of all 4
bits in the mux config field (so far, only functions 0-8 and 14-15 are
used). This increases the maximum possible number of functions.
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSamuel Holland <samuel@sholland.org>
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220713025233.27248-7-samuel@sholland.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/sunxi/Kconfig

@@ -81,6 +81,11 @@ config PINCTRL_SUN9I_A80_R
 	default MACH_SUN9I
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN20I_D1
+	bool "Support for the Allwinner D1 PIO"
+	default MACH_SUN8I || (RISCV && ARCH_SUNXI)
+	select PINCTRL_SUNXI
+
 config PINCTRL_SUN50I_A64
 	bool "Support for the Allwinner A64 PIO"
 	default ARM64 && ARCH_SUNXI

drivers/pinctrl/sunxi/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_SUN8I_A83T_R)	+= pinctrl-sun8i-a83t-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3_R)	+= pinctrl-sun8i-h3-r.o
 obj-$(CONFIG_PINCTRL_SUN8I_V3S)		+= pinctrl-sun8i-v3s.o
+obj-$(CONFIG_PINCTRL_SUN20I_D1)		+= pinctrl-sun20i-d1.o
 obj-$(CONFIG_PINCTRL_SUN50I_H5)		+= pinctrl-sun50i-h5.o
 obj-$(CONFIG_PINCTRL_SUN50I_H6)		+= pinctrl-sun50i-h6.o
 obj-$(CONFIG_PINCTRL_SUN50I_H6_R)	+= pinctrl-sun50i-h6-r.o

drivers/pinctrl/sunxi/pinctrl-sunxi.c

@@ -1297,11 +1297,11 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
 
 	/*
 	 * Find an upper bound for the maximum number of functions: in
-	 * the worst case we have gpio_in, gpio_out, irq and up to four
+	 * the worst case we have gpio_in, gpio_out, irq and up to seven
 	 * special functions per pin, plus one entry for the sentinel.
 	 * We'll reallocate that later anyway.
 	 */
-	pctl->functions = kcalloc(4 * pctl->ngroups + 4,
+	pctl->functions = kcalloc(7 * pctl->ngroups + 4,
 				  sizeof(*pctl->functions),
 				  GFP_KERNEL);
 	if (!pctl->functions)
@@ -1494,9 +1494,15 @@ int sunxi_pinctrl_init_with_variant(struct platform_device *pdev,
 	pctl->dev = &pdev->dev;
 	pctl->desc = desc;
 	pctl->variant = variant;
-	pctl->bank_mem_size = BANK_MEM_SIZE;
-	pctl->pull_regs_offset = PULL_REGS_OFFSET;
-	pctl->dlevel_field_width = DLEVEL_FIELD_WIDTH;
+	if (pctl->variant >= PINCTRL_SUN20I_D1) {
+		pctl->bank_mem_size = D1_BANK_MEM_SIZE;
+		pctl->pull_regs_offset = D1_PULL_REGS_OFFSET;
+		pctl->dlevel_field_width = D1_DLEVEL_FIELD_WIDTH;
+	} else {
+		pctl->bank_mem_size = BANK_MEM_SIZE;
+		pctl->pull_regs_offset = PULL_REGS_OFFSET;
+		pctl->dlevel_field_width = DLEVEL_FIELD_WIDTH;
+	}
 
 	pctl->irq_array = devm_kcalloc(&pdev->dev,
 				       IRQ_PER_BANK * pctl->desc->irq_banks,

drivers/pinctrl/sunxi/pinctrl-sunxi.h

@@ -44,6 +44,10 @@
 #define PULL_REGS_OFFSET	0x1c
 #define PULL_FIELD_WIDTH	2
 
+#define D1_BANK_MEM_SIZE	0x30
+#define D1_DLEVEL_FIELD_WIDTH	4
+#define D1_PULL_REGS_OFFSET	0x24
+
 #define PINS_PER_BANK		32
 
 #define IRQ_PER_BANK		32
@@ -88,6 +92,8 @@
 #define PINCTRL_SUN8I_R40	BIT(8)
 #define PINCTRL_SUN8I_V3	BIT(9)
 #define PINCTRL_SUN8I_V3S	BIT(10)
+/* Variants below here have an updated register layout. */
+#define PINCTRL_SUN20I_D1	BIT(11)
 
 #define PIO_POW_MOD_SEL_REG	0x340
 #define PIO_POW_MOD_CTL_REG	0x344