提交 04c67a90 编写于 作者: D David S. Miller

Merge branch 'sh_eth-remove-BE-desc-support'

Sergei Shtylyov says:

====================
sh_eth: remove unused BE descriptor support

   Here's a set of 2 patches against DaveM's 'net-next.git' repo plus the
recently merged to 'net.git' repo fix for the 16-bit descriptor endianness.
We get rid of ~30 LoCs and ~300 bytes of code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -967,30 +967,6 @@ static void sh_eth_set_receive_align(struct sk_buff *skb)
skb_reserve(skb, SH_ETH_RX_ALIGN - reserve);
}
/* CPU <-> EDMAC endian convert */
static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x)
{
switch (mdp->edmac_endian) {
case EDMAC_LITTLE_ENDIAN:
return cpu_to_le32(x);
case EDMAC_BIG_ENDIAN:
return cpu_to_be32(x);
}
return x;
}
static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x)
{
switch (mdp->edmac_endian) {
case EDMAC_LITTLE_ENDIAN:
return le32_to_cpu(x);
case EDMAC_BIG_ENDIAN:
return be32_to_cpu(x);
}
return x;
}
/* Program the hardware MAC address from dev->dev_addr. */
static void update_mac_address(struct net_device *ndev)
{
......@@ -1164,7 +1140,7 @@ static void sh_eth_ring_format(struct net_device *ndev)
rxdesc = &mdp->rx_ring[i];
/* The size of the buffer is a multiple of 32 bytes. */
buf_len = ALIGN(mdp->rx_buf_sz, 32);
rxdesc->len = cpu_to_edmac(mdp, buf_len << 16);
rxdesc->len = cpu_to_le32(buf_len << 16);
dma_addr = dma_map_single(&ndev->dev, skb->data, buf_len,
DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, dma_addr)) {
......@@ -1172,8 +1148,8 @@ static void sh_eth_ring_format(struct net_device *ndev)
break;
}
mdp->rx_skbuff[i] = skb;
rxdesc->addr = cpu_to_edmac(mdp, dma_addr);
rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
rxdesc->addr = cpu_to_le32(dma_addr);
rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP);
/* Rx descriptor address set */
if (i == 0) {
......@@ -1187,7 +1163,7 @@ static void sh_eth_ring_format(struct net_device *ndev)
mdp->dirty_rx = (u32) (i - mdp->num_rx_ring);
/* Mark the last entry as wrapping the ring. */
rxdesc->status |= cpu_to_edmac(mdp, RD_RDLE);
rxdesc->status |= cpu_to_le32(RD_RDLE);
memset(mdp->tx_ring, 0, tx_ringsize);
......@@ -1195,8 +1171,8 @@ static void sh_eth_ring_format(struct net_device *ndev)
for (i = 0; i < mdp->num_tx_ring; i++) {
mdp->tx_skbuff[i] = NULL;
txdesc = &mdp->tx_ring[i];
txdesc->status = cpu_to_edmac(mdp, TD_TFP);
txdesc->len = cpu_to_edmac(mdp, 0);
txdesc->status = cpu_to_le32(TD_TFP);
txdesc->len = cpu_to_le32(0);
if (i == 0) {
/* Tx descriptor address set */
sh_eth_write(ndev, mdp->tx_desc_dma, TDLAR);
......@@ -1206,7 +1182,7 @@ static void sh_eth_ring_format(struct net_device *ndev)
}
}
txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
txdesc->status |= cpu_to_le32(TD_TDLE);
}
/* Get skb and descriptor buffer */
......@@ -1362,7 +1338,7 @@ static void sh_eth_dev_exit(struct net_device *ndev)
* packet boundary if it's currently running
*/
for (i = 0; i < mdp->num_tx_ring; i++)
mdp->tx_ring[i].status &= ~cpu_to_edmac(mdp, TD_TACT);
mdp->tx_ring[i].status &= ~cpu_to_le32(TD_TACT);
/* Disable TX FIFO egress to MAC */
sh_eth_rcv_snd_disable(ndev);
......@@ -1394,29 +1370,28 @@ static int sh_eth_txfree(struct net_device *ndev)
for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
entry = mdp->dirty_tx % mdp->num_tx_ring;
txdesc = &mdp->tx_ring[entry];
if (txdesc->status & cpu_to_edmac(mdp, TD_TACT))
if (txdesc->status & cpu_to_le32(TD_TACT))
break;
/* TACT bit must be checked before all the following reads */
dma_rmb();
netif_info(mdp, tx_done, ndev,
"tx entry %d status 0x%08x\n",
entry, edmac_to_cpu(mdp, txdesc->status));
entry, le32_to_cpu(txdesc->status));
/* Free the original skb. */
if (mdp->tx_skbuff[entry]) {
dma_unmap_single(&ndev->dev,
edmac_to_cpu(mdp, txdesc->addr),
edmac_to_cpu(mdp, txdesc->len) >> 16,
dma_unmap_single(&ndev->dev, le32_to_cpu(txdesc->addr),
le32_to_cpu(txdesc->len) >> 16,
DMA_TO_DEVICE);
dev_kfree_skb_irq(mdp->tx_skbuff[entry]);
mdp->tx_skbuff[entry] = NULL;
free_num++;
}
txdesc->status = cpu_to_edmac(mdp, TD_TFP);
txdesc->status = cpu_to_le32(TD_TFP);
if (entry >= mdp->num_tx_ring - 1)
txdesc->status |= cpu_to_edmac(mdp, TD_TDLE);
txdesc->status |= cpu_to_le32(TD_TDLE);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += edmac_to_cpu(mdp, txdesc->len) >> 16;
ndev->stats.tx_bytes += le32_to_cpu(txdesc->len) >> 16;
}
return free_num;
}
......@@ -1440,11 +1415,11 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
boguscnt = min(boguscnt, *quota);
limit = boguscnt;
rxdesc = &mdp->rx_ring[entry];
while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
/* RACT bit must be checked before all the following reads */
dma_rmb();
desc_status = edmac_to_cpu(mdp, rxdesc->status);
pkt_len = edmac_to_cpu(mdp, rxdesc->len) & RD_RFL;
desc_status = le32_to_cpu(rxdesc->status);
pkt_len = le32_to_cpu(rxdesc->len) & RD_RFL;
if (--boguscnt < 0)
break;
......@@ -1482,7 +1457,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
if (desc_status & RD_RFS10)
ndev->stats.rx_over_errors++;
} else if (skb) {
dma_addr = edmac_to_cpu(mdp, rxdesc->addr);
dma_addr = le32_to_cpu(rxdesc->addr);
if (!mdp->cd->hw_swap)
sh_eth_soft_swap(
phys_to_virt(ALIGN(dma_addr, 4)),
......@@ -1511,7 +1486,7 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
rxdesc = &mdp->rx_ring[entry];
/* The size of the buffer is 32 byte boundary. */
buf_len = ALIGN(mdp->rx_buf_sz, 32);
rxdesc->len = cpu_to_edmac(mdp, buf_len << 16);
rxdesc->len = cpu_to_le32(buf_len << 16);
if (mdp->rx_skbuff[entry] == NULL) {
skb = netdev_alloc_skb(ndev, skbuff_size);
......@@ -1527,15 +1502,14 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
mdp->rx_skbuff[entry] = skb;
skb_checksum_none_assert(skb);
rxdesc->addr = cpu_to_edmac(mdp, dma_addr);
rxdesc->addr = cpu_to_le32(dma_addr);
}
dma_wmb(); /* RACT bit must be set after all the above writes */
if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |=
cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDLE);
cpu_to_le32(RD_RACT | RD_RFP | RD_RDLE);
else
rxdesc->status |=
cpu_to_edmac(mdp, RD_RACT | RD_RFP);
rxdesc->status |= cpu_to_le32(RD_RACT | RD_RFP);
}
/* Restart Rx engine if stopped. */
......@@ -2335,8 +2309,8 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < mdp->num_rx_ring; i++) {
rxdesc = &mdp->rx_ring[i];
rxdesc->status = cpu_to_edmac(mdp, 0);
rxdesc->addr = cpu_to_edmac(mdp, 0xBADF00D0);
rxdesc->status = cpu_to_le32(0);
rxdesc->addr = cpu_to_le32(0xBADF00D0);
dev_kfree_skb(mdp->rx_skbuff[i]);
mdp->rx_skbuff[i] = NULL;
}
......@@ -2384,14 +2358,14 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
kfree_skb(skb);
return NETDEV_TX_OK;
}
txdesc->addr = cpu_to_edmac(mdp, dma_addr);
txdesc->len = cpu_to_edmac(mdp, skb->len << 16);
txdesc->addr = cpu_to_le32(dma_addr);
txdesc->len = cpu_to_le32(skb->len << 16);
dma_wmb(); /* TACT bit must be set after all the above writes */
if (entry >= mdp->num_tx_ring - 1)
txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE);
txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE);
else
txdesc->status |= cpu_to_edmac(mdp, TD_TACT);
txdesc->status |= cpu_to_le32(TD_TACT);
mdp->cur_tx++;
......@@ -3097,8 +3071,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
/* get PHY ID */
mdp->phy_id = pd->phy;
mdp->phy_interface = pd->phy_interface;
/* EDMAC endian */
mdp->edmac_endian = pd->edmac_endian;
mdp->no_ether_link = pd->no_ether_link;
mdp->ether_link_active_low = pd->ether_link_active_low;
......
......@@ -513,7 +513,6 @@ struct sh_eth_private {
u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */
u32 cur_tx, dirty_tx;
u32 rx_buf_sz; /* Based on MTU+slack. */
int edmac_endian;
struct napi_struct napi;
bool irq_enabled;
/* MII transceiver section. */
......
......@@ -4,7 +4,7 @@
#include <linux/phy.h>
#include <linux/if_ether.h>
enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
enum {EDMAC_LITTLE_ENDIAN};
struct sh_eth_plat_data {
int phy;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册