Merge tag 'v4.11-rc5' into next

Sync up with mainline to bring in changes to input subsystem merged
through other trees.

Documentation/00-INDEX

@@ -270,8 +270,8 @@ m68k/
 	- directory with info about Linux on Motorola 68k architecture.
 mailbox.txt
 	- How to write drivers for the common mailbox framework (IPC).
-md-cluster.txt
-	- info on shared-device RAID MD cluster.
+md/
+	- directory with info about Linux Software RAID
 media/
 	- info on media drivers: uAPI, kAPI and driver documentation.
 memory-barriers.txt

Documentation/ABI/obsolete/sysfs-block-zram

-What:		/sys/block/zram<id>/num_reads
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The num_reads file is read-only and specifies the number of
-		reads (failed or successful) done on this device.
-		Now accessible via zram<id>/stat node.
-
-What:		/sys/block/zram<id>/num_writes
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The num_writes file is read-only and specifies the number of
-		writes (failed or successful) done on this device.
-		Now accessible via zram<id>/stat node.
-
-What:		/sys/block/zram<id>/invalid_io
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The invalid_io file is read-only and specifies the number of
-		non-page-size-aligned I/O requests issued to this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/failed_reads
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_reads file is read-only and specifies the number of
-		failed reads happened on this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/failed_writes
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_writes file is read-only and specifies the number of
-		failed writes happened on this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/notify_free
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The notify_free file is read-only. Depending on device usage
-		scenario it may account a) the number of pages freed because
-		of swap slot free notifications or b) the number of pages freed
-		because of REQ_DISCARD requests sent by bio. The former ones
-		are sent to a swap block device when a swap slot is freed, which
-		implies that this disk is being used as a swap disk. The latter
-		ones are sent by filesystem mounted with discard option,
-		whenever some data blocks are getting discarded.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/zero_pages
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The zero_pages file is read-only and specifies number of zero
-		filled pages written to this disk. No memory is allocated for
-		such pages.
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/orig_data_size
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The orig_data_size file is read-only and specifies uncompressed
-		size of data stored in this disk. This excludes zero-filled
-		pages (zero_pages) since no memory is allocated for them.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/compr_data_size
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The compr_data_size file is read-only and specifies compressed
-		size of data stored in this disk. So, compression ratio can be
-		calculated using orig_data_size and this statistic.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/mem_used_total
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_used_total file is read-only and specifies the amount
-		of memory, including allocator fragmentation and metadata
-		overhead, allocated for this disk. So, allocator space
-		efficiency can be calculated using compr_data_size and this
-		statistic.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/mem_used_max
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_used_max file is read/write and specifies the amount
-		of maximum memory zram have consumed to store compressed data.
-		For resetting the value, you should write "0". Otherwise,
-		you could see -EINVAL.
-		Unit: bytes
-		Downgraded to write-only node: so it's possible to set new
-		value only; its current value is stored in zram<id>/mm_stat
-		node.
-
-What:		/sys/block/zram<id>/mem_limit
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_limit file is read/write and specifies the maximum
-		amount of memory ZRAM can use to store the compressed data.
-		The limit could be changed in run time and "0" means disable
-		the limit.  No limit is the initial state.  Unit: bytes
-		Downgraded to write-only node: so it's possible to set new
-		value only; its current value is stored in zram<id>/mm_stat
-		node.

Documentation/ABI/testing/configfs-rdma_cm

@@ -20,3 +20,11 @@ Description: 	RDMA-CM based connections from HCA <hca> at port <port-num>
 		will be initiated with this RoCE type as default.
 		The possible RoCE types are either "IB/RoCE v1" or "RoCE v2".
 		This parameter has RW access.
+
+What: 		/config/rdma_cm/<hca>/ports/<port-num>/default_roce_tos
+Date: 		February 7, 2017
+KernelVersion:  4.11.0
+Description: 	RDMA-CM QPs from HCA <hca> at port <port-num>
+		will be created with this TOS as default.
+		This can be overridden by using the rdma_set_option API.
+		The possible RoCE TOS values are 0-255.

Documentation/ABI/testing/sysfs-block-zram

@@ -22,41 +22,6 @@ Description:
 		device. The reset operation frees all the memory associated
 		with this device.
 
-What:		/sys/block/zram<id>/num_reads
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The num_reads file is read-only and specifies the number of
-		reads (failed or successful) done on this device.
-
-What:		/sys/block/zram<id>/num_writes
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The num_writes file is read-only and specifies the number of
-		writes (failed or successful) done on this device.
-
-What:		/sys/block/zram<id>/invalid_io
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The invalid_io file is read-only and specifies the number of
-		non-page-size-aligned I/O requests issued to this device.
-
-What:		/sys/block/zram<id>/failed_reads
-Date:		February 2014
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_reads file is read-only and specifies the number of
-		failed reads happened on this device.
-
-What:		/sys/block/zram<id>/failed_writes
-Date:		February 2014
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_writes file is read-only and specifies the number of
-		failed writes happened on this device.
-
 What:		/sys/block/zram<id>/max_comp_streams
 Date:		February 2014
 Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
@@ -73,74 +38,24 @@ Description:
 		available and selected compression algorithms, change
 		compression algorithm selection.
 
-What:		/sys/block/zram<id>/notify_free
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The notify_free file is read-only. Depending on device usage
-		scenario it may account a) the number of pages freed because
-		of swap slot free notifications or b) the number of pages freed
-		because of REQ_DISCARD requests sent by bio. The former ones
-		are sent to a swap block device when a swap slot is freed, which
-		implies that this disk is being used as a swap disk. The latter
-		ones are sent by filesystem mounted with discard option,
-		whenever some data blocks are getting discarded.
-
-What:		/sys/block/zram<id>/zero_pages
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The zero_pages file is read-only and specifies number of zero
-		filled pages written to this disk. No memory is allocated for
-		such pages.
-
-What:		/sys/block/zram<id>/orig_data_size
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The orig_data_size file is read-only and specifies uncompressed
-		size of data stored in this disk. This excludes zero-filled
-		pages (zero_pages) since no memory is allocated for them.
-		Unit: bytes
-
-What:		/sys/block/zram<id>/compr_data_size
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The compr_data_size file is read-only and specifies compressed
-		size of data stored in this disk. So, compression ratio can be
-		calculated using orig_data_size and this statistic.
-		Unit: bytes
-
-What:		/sys/block/zram<id>/mem_used_total
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The mem_used_total file is read-only and specifies the amount
-		of memory, including allocator fragmentation and metadata
-		overhead, allocated for this disk. So, allocator space
-		efficiency can be calculated using compr_data_size and this
-		statistic.
-		Unit: bytes
-
 What:		/sys/block/zram<id>/mem_used_max
 Date:		August 2014
 Contact:	Minchan Kim <minchan@kernel.org>
 Description:
-		The mem_used_max file is read/write and specifies the amount
-		of maximum memory zram have consumed to store compressed data.
-		For resetting the value, you should write "0". Otherwise,
-		you could see -EINVAL.
+		The mem_used_max file is write-only and is used to reset
+		the counter of maximum memory zram have consumed to store
+		compressed data. For resetting the value, you should write
+		"0". Otherwise, you could see -EINVAL.
 		Unit: bytes
 
 What:		/sys/block/zram<id>/mem_limit
 Date:		August 2014
 Contact:	Minchan Kim <minchan@kernel.org>
 Description:
-		The mem_limit file is read/write and specifies the maximum
-		amount of memory ZRAM can use to store the compressed data.  The
-		limit could be changed in run time and "0" means disable the
-		limit.  No limit is the initial state.  Unit: bytes
+		The mem_limit file is write-only and specifies the maximum
+		amount of memory ZRAM can use to store the compressed data.
+		The limit could be changed in run time and "0" means disable
+		the limit. No limit is the initial state.  Unit: bytes
 
 What:		/sys/block/zram<id>/compact
 Date:		August 2015

Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k

+What:		/sys/bus/i2c/devices/.../trickle_charge_bypass
+Date:		Jan 2017
+KernelVersion:	4.11
+Contact:	Enric Balletbo i Serra <eballetbo@gmail.com>
+Description:    Attribute for enable/disable the trickle charge bypass
+		The trickle_charge_bypass attribute allows the userspace to
+                enable/disable the Trickle charge FET bypass.

Documentation/ABI/testing/sysfs-bus-iio

@@ -170,6 +170,16 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Gravity in direction x, y or z (may be arbitrarily assigned
+		but should match other such assignments on device).
+		Units after application of scale and offset are m/s^2.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
@@ -805,7 +815,7 @@ Description:
 		attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
 		and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
 		will get activated once in_voltage0_raw goes above 1200 and will become
-		deactived again once the value falls below 1150.
+		deactivated again once the value falls below 1150.
 
 What:		/sys/.../events/in_accel_x_raw_roc_rising_value
 What:		/sys/.../events/in_accel_x_raw_roc_falling_value
@@ -1245,7 +1255,8 @@ Description:
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
 		to SI units is not possible. Higher proximity measurements
-		indicate closer objects, and vice versa.
+		indicate closer objects, and vice versa. Units after
+		application of scale and offset are meters.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw

Documentation/ABI/testing/sysfs-bus-iio-adc-stm32

+What:		/sys/bus/iio/devices/triggerX/trigger_polarity
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		The STM32 ADC can be configured to use external trigger sources
+		(e.g. timers, pwm or exti gpio). Then, it can be tuned to start
+		conversions on external trigger by either:
+		- "rising-edge"
+		- "falling-edge"
+		- "both-edges".
+		Reading returns current trigger polarity.
+		Writing value before enabling conversions sets trigger polarity.
+
+What:		/sys/bus/iio/devices/triggerX/trigger_polarity_available
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		List all available trigger_polarity settings.

Documentation/ABI/testing/sysfs-bus-iio-distance-srf08

+What		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Show or set the gain boost of the amp, from 0-31 range.
+		default 31
+
+What		/sys/bus/iio/devices/iio:deviceX/sensor_max_range
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+                Show or set the maximum range between the sensor and the
+		first object echoed in meters. Default value is 6.020.
+		This setting limits the time the driver is waiting for a
+		echo.
+		Showing the range of available values is represented as the
+		minimum value, the step and the maximum value, all enclosed
+		in square brackets.
+		Example:
+		[0.043 0.043 11.008]

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

+What:		/sys/bus/iio/devices/triggerX/master_mode_available
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible master modes which are:
+		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "update"    : The update event is selected as trigger output.
+				For instance a master timer can then be used as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+		- "OC1REF"    : OC1REF signal is used as trigger output.
+		- "OC2REF"    : OC2REF signal is used as trigger output.
+		- "OC3REF"    : OC3REF signal is used as trigger output.
+		- "OC4REF"    : OC4REF signal is used as trigger output.
+
+What:		/sys/bus/iio/devices/triggerX/master_mode
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current master modes.
+		Writing set the master mode
+
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.

Documentation/ABI/testing/sysfs-class-devfreq-event

+What:		/sys/class/devfreq-event/event(x)/
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq-event objects.
+		This allows accessing various devfreq-event specific variables.
+		The name of devfreq-event object denoted as 'event(x)' which
+		includes the unique number of 'x' for each devfreq-event object.
+
+What:		/sys/class/devfreq-event/event(x)/name
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/name attribute contains
+		the name of the devfreq-event object. This attribute is
+		read-only.
+
+What:		/sys/class/devfreq-event/event(x)/enable_count
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/enable_count attribute
+		contains the reference count to enable the devfreq-event
+		object. If the device is enabled, the value of attribute is
+		greater than zero.

Documentation/ABI/testing/sysfs-class-led

@@ -23,6 +23,23 @@ Description:
 		If the LED does not support different brightness levels, this
 		should be 1.
 
+What:		/sys/class/leds/<led>/brightness_hw_changed
+Date:		January 2017
+KernelVersion:	4.11
+Description:
+		Last hardware set brightness level for this LED. Some LEDs
+		may be changed autonomously by hardware/firmware. Only LEDs
+		where this happens and the driver can detect this, will have
+		this file.
+
+		This file supports poll() to detect when the hardware changes
+		the brightness.
+
+		Reading this file will return the last brightness level set
+		by the hardware, this may be different from the current
+		brightness. Reading this file when no hw brightness change
+		event has happened will return an ENODATA error.
+
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17

Documentation/ABI/testing/sysfs-class-rc

@@ -62,18 +62,18 @@ Description:
 		This value may be reset to 0 if the current protocol is altered.
 
 What:		/sys/class/rc/rcN/wakeup_protocols
-Date:		Feb 2014
-KernelVersion:	3.15
+Date:		Feb 2017
+KernelVersion:	4.11
 Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 Description:
 		Reading this file returns a list of available protocols to use
 		for the wakeup filter, something like:
-		    "rc5 rc6 nec jvc [sony]"
+		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+		Note that protocol variants are listed, so "nec", "sony",
+		"rc-5", "rc-6" have their different bit length encodings
+		listed if available.
 		The enabled wakeup protocol is shown in [] brackets.
-		Writing "+proto" will add a protocol to the list of enabled
-		wakeup protocols.
-		Writing "-proto" will remove a protocol from the list of enabled
-		wakeup protocols.
+		Only one protocol can be selected at a time.
 		Writing "proto" will use "proto" for wakeup events.
 		Writing "none" will disable wakeup.
 		Write fails with EINVAL if an invalid protocol combination or

Documentation/ABI/testing/sysfs-devices-edac

@@ -138,3 +138,20 @@ Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 Description:	This attribute file will display what type of memory is
 		currently on this csrow. Normally, either buffered or
 		unbuffered memory (for example, Unbuffered-DDR3).
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ce_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of correctable
+		errors that have occurred on this DIMM. This count is very important
+		to examine. CEs provide early indications that a DIMM is beginning
+		to fail. This count field should be monitored for non-zero values
+		and report such information to the system administrator.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ue_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of uncorrectable
+		errors that have occurred on this DIMM. If panic_on_ue is set, this
+		counter will not have a chance to increment, since EDAC will panic the
+		system

Documentation/ABI/testing/sysfs-kernel-iommu_groups

@@ -12,3 +12,15 @@ Description:	/sys/kernel/iommu_groups/ contains a number of sub-
 		file if the IOMMU driver has chosen to register a more
 		common name for the group.
 Users:
+
+What:		/sys/kernel/iommu_groups/reserved_regions
+Date: 		January 2017
+KernelVersion:  v4.11
+Contact: 	Eric Auger <eric.auger@redhat.com>
+Description:    /sys/kernel/iommu_groups/reserved_regions list IOVA
+		regions that are reserved. Not necessarily all
+		reserved regions are listed. This is typically used to
+		output direct-mapped, MSI, non mappable regions. Each
+		region is described on a single line: the 1st field is
+		the base IOVA, the second is the end IOVA and the third
+		field describes the type of the region.

Documentation/ABI/testing/sysfs-platform-hidma

@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-*/chid
 		/sys/devices/platform/QCOM8061:*/chid
 Date:		Dec 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the ID of the channel within the HIDMA instance.
 		It is used to associate a given HIDMA channel with the

Documentation/ABI/testing/sysfs-platform-hidma-mgmt

@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains either 0 or 1 and indicates if the DMA channel is a
 		low priority (0) or high priority (1) channel.
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains 0..15 and indicates the weight of the channel among
 		equal priority channels during round robin scheduling.
@@ -20,7 +20,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
 		/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the platform specific cycle value to wait after a
 		reset command is issued. If the value is chosen too short,
@@ -32,7 +32,7 @@ What:		/sys/devices/platform/hidma-mgmt*/dma_channels
 		/sys/devices/platform/QCOM8060:*/dma_channels
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the number of dma channels supported by one instance
 		of HIDMA hardware. The value may change from chip to chip.
@@ -41,7 +41,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_major
 		/sys/devices/platform/QCOM8060:*/hw_version_major
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Version number major for the hardware.
 
@@ -49,7 +49,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_minor
 		/sys/devices/platform/QCOM8060:*/hw_version_minor
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Version number minor for the hardware.
 
@@ -57,7 +57,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_rd_xactions
 		/sys/devices/platform/QCOM8060:*/max_rd_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		read transactions that can be issued back to back.
@@ -69,7 +69,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_read_request
 		/sys/devices/platform/QCOM8060:*/max_read_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Size of each read request. The value needs to be a power
 		of two and can be between 128 and 1024.
@@ -78,7 +78,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_wr_xactions
 		/sys/devices/platform/QCOM8060:*/max_wr_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		write transactions that can be issued back to back.
@@ -91,7 +91,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_write_request
 		/sys/devices/platform/QCOM8060:*/max_write_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Size of each write request. The value needs to be a power
 		of two and can be between 128 and 1024.

Documentation/DMA-ISA-LPC.txt

@@ -42,7 +42,7 @@ requirements you pass the flag GFP_DMA to kmalloc.
 
 Unfortunately the memory available for ISA DMA is scarce so unless you
 allocate the memory during boot-up it's a good idea to also pass
-__GFP_REPEAT and __GFP_NOWARN to make the allocater try a bit harder.
+__GFP_REPEAT and __GFP_NOWARN to make the allocator try a bit harder.
 
 (This scarcity also means that you should allocate the buffer as
 early as possible and not release it until the driver is unloaded.)

Documentation/DMA-attributes.txt

@@ -143,3 +143,13 @@ So, this provides a way for drivers to avoid those error messages on calls
 where allocation failures are not a problem, and shouldn't bother the logs.
 
 NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
+
+DMA_ATTR_PRIVILEGED
+------------------------------
+
+Some advanced peripherals such as remote processors and GPUs perform
+accesses to DMA buffers in both privileged "supervisor" and unprivileged
+"user" modes.  This attribute is used to indicate to the DMA-mapping
+subsystem that the buffer is fully accessible at the elevated privilege
+level (and ideally inaccessible or at least read-only at the
+lesser-privileged levels).

Documentation/DocBook/Makefile

@@ -7,13 +7,13 @@
 # list of DOCBOOKS.
 
 DOCBOOKS := z8530book.xml  \
-	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
+	    kernel-hacking.xml kernel-locking.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
-	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    sh.xml regulator.xml w1.xml \
-	    writing_musb_glue_layer.xml iio.xml
+	    genericirq.xml s390-drivers.xml scsi.xml \
+	    sh.xml w1.xml \
+	    writing_musb_glue_layer.xml
 
 ifeq ($(DOCBOOKS),)
 
@@ -71,6 +71,7 @@ installmandocs: mandocs
 # no-op for the DocBook toolchain
 epubdocs:
 latexdocs:
+linkcheckdocs:
 
 ###
 #External programs used
@@ -272,6 +273,6 @@ cleandocs:
 	$(Q)rm -rf $(call objectify, $(clean-dirs))
 
 # Declare the contents of the .PHONY variable as phony.  We keep that
-# information in a variable se we can use it in if_changed and friends.
+# information in a variable so we can use it in if_changed and friends.
 
 .PHONY: $(PHONY)

Documentation/DocBook/deviceiobook.tmpl

-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="DoingIO">
- <bookinfo>
-  <title>Bus-Independent Device Accesses</title>
-  
-  <authorgroup>
-   <author>
-    <firstname>Matthew</firstname>
-    <surname>Wilcox</surname>
-    <affiliation>
-     <address>
-      <email>matthew@wil.cx</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <authorgroup>
-   <author>
-    <firstname>Alan</firstname>
-    <surname>Cox</surname>
-    <affiliation>
-     <address>
-      <email>alan@lxorguk.ukuu.org.uk</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>2001</year>
-   <holder>Matthew Wilcox</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="intro">
-      <title>Introduction</title>
-  <para>
-	Linux provides an API which abstracts performing IO across all busses
-	and devices, allowing device drivers to be written independently of
-	bus type.
-  </para>
-  </chapter>
-
-  <chapter id="bugs">
-     <title>Known Bugs And Assumptions</title>
-  <para>
-	None.	
-  </para>
-  </chapter>
-
-  <chapter id="mmio">
-    <title>Memory Mapped IO</title>
-    <sect1 id="getting_access_to_the_device">
-      <title>Getting Access to the Device</title>
-      <para>
-	The most widely supported form of IO is memory mapped IO.
-	That is, a part of the CPU's address space is interpreted
-	not as accesses to memory, but as accesses to a device.  Some
-	architectures define devices to be at a fixed address, but most
-	have some method of discovering devices.  The PCI bus walk is a
-	good example of such a scheme.	This document does not cover how
-	to receive such an address, but assumes you are starting with one.
-	Physical addresses are of type unsigned long. 
-      </para>
-
-      <para>
-	This address should not be used directly.  Instead, to get an
-	address suitable for passing to the accessor functions described
-	below, you should call <function>ioremap</function>.
-	An address suitable for accessing the device will be returned to you.
-      </para>
-
-      <para>
-	After you've finished using the device (say, in your module's
-	exit routine), call <function>iounmap</function> in order to return
-	the address space to the kernel.  Most architectures allocate new
-	address space each time you call <function>ioremap</function>, and
-	they can run out unless you call <function>iounmap</function>.
-      </para>
-    </sect1>
-
-    <sect1 id="accessing_the_device">
-      <title>Accessing the device</title>
-      <para>
-	The part of the interface most used by drivers is reading and
-	writing memory-mapped registers on the device.	Linux provides
-	interfaces to read and write 8-bit, 16-bit, 32-bit and 64-bit
-	quantities.  Due to a historical accident, these are named byte,
-	word, long and quad accesses.  Both read and write accesses are
-	supported; there is no prefetch support at this time.
-      </para>
-
-      <para>
-	The functions are named <function>readb</function>,
-	<function>readw</function>, <function>readl</function>,
-	<function>readq</function>, <function>readb_relaxed</function>,
-	<function>readw_relaxed</function>, <function>readl_relaxed</function>,
-	<function>readq_relaxed</function>, <function>writeb</function>,
-	<function>writew</function>, <function>writel</function> and
-	<function>writeq</function>.
-      </para>
-
-      <para>
-	Some devices (such as framebuffers) would like to use larger
-	transfers than 8 bytes at a time.  For these devices, the
-	<function>memcpy_toio</function>, <function>memcpy_fromio</function>
-	and <function>memset_io</function> functions are provided.
-	Do not use memset or memcpy on IO addresses; they
-	are not guaranteed to copy data in order.
-      </para>
-
-      <para>
-	The read and write functions are defined to be ordered. That is the
-	compiler is not permitted to reorder the I/O sequence. When the 
-	ordering can be compiler optimised, you can use <function>
-	__readb</function> and friends to indicate the relaxed ordering. Use 
-	this with care.
-      </para>
-
-      <para>
-	While the basic functions are defined to be synchronous with respect
-	to each other and ordered with respect to each other the busses the
-	devices sit on may themselves have asynchronicity. In particular many
-	authors are burned by the fact that PCI bus writes are posted
-	asynchronously. A driver author must issue a read from the same
-	device to ensure that writes have occurred in the specific cases the
-	author cares. This kind of property cannot be hidden from driver
-	writers in the API.  In some cases, the read used to flush the device
-	may be expected to fail (if the card is resetting, for example).  In
-	that case, the read should be done from config space, which is
-	guaranteed to soft-fail if the card doesn't respond.
-      </para>
-
-      <para>
-	The following is an example of flushing a write to a device when
-	the driver would like to ensure the write's effects are visible prior
-	to continuing execution.
-      </para>
-
-<programlisting>
-static inline void
-qla1280_disable_intrs(struct scsi_qla_host *ha)
-{
-	struct device_reg *reg;
-
-	reg = ha->iobase;
-	/* disable risc and host interrupts */
-	WRT_REG_WORD(&amp;reg->ictrl, 0);
-	/*
-	 * The following read will ensure that the above write
-	 * has been received by the device before we return from this
-	 * function.
-	 */
-	RD_REG_WORD(&amp;reg->ictrl);
-	ha->flags.ints_enabled = 0;
-}
-</programlisting>
-
-      <para>
-	In addition to write posting, on some large multiprocessing systems
-	(e.g. SGI Challenge, Origin and Altix machines) posted writes won't
-	be strongly ordered coming from different CPUs.  Thus it's important
-	to properly protect parts of your driver that do memory-mapped writes
-	with locks and use the <function>mmiowb</function> to make sure they
-	arrive in the order intended.  Issuing a regular <function>readX
-	</function> will also ensure write ordering, but should only be used
-	when the driver has to be sure that the write has actually arrived
-	at the device (not that it's simply ordered with respect to other
-	writes), since a full <function>readX</function> is a relatively
-	expensive operation.
-      </para>
-
-      <para>
-	Generally, one should use <function>mmiowb</function> prior to
-	releasing a spinlock that protects regions using <function>writeb
-	</function> or similar functions that aren't surrounded by <function>
-	readb</function> calls, which will ensure ordering and flushing.  The
-	following pseudocode illustrates what might occur if write ordering
-	isn't guaranteed via <function>mmiowb</function> or one of the
-	<function>readX</function> functions.
-      </para>
-
-<programlisting>
-CPU A:  spin_lock_irqsave(&amp;dev_lock, flags)
-CPU A:  ...
-CPU A:  writel(newval, ring_ptr);
-CPU A:  spin_unlock_irqrestore(&amp;dev_lock, flags)
-        ...
-CPU B:  spin_lock_irqsave(&amp;dev_lock, flags)
-CPU B:  writel(newval2, ring_ptr);
-CPU B:  ...
-CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
-</programlisting>
-
-      <para>
-	In the case above, newval2 could be written to ring_ptr before
-	newval.  Fixing it is easy though:
-      </para>
-
-<programlisting>
-CPU A:  spin_lock_irqsave(&amp;dev_lock, flags)
-CPU A:  ...
-CPU A:  writel(newval, ring_ptr);
-CPU A:  mmiowb(); /* ensure no other writes beat us to the device */
-CPU A:  spin_unlock_irqrestore(&amp;dev_lock, flags)
-        ...
-CPU B:  spin_lock_irqsave(&amp;dev_lock, flags)
-CPU B:  writel(newval2, ring_ptr);
-CPU B:  ...
-CPU B:  mmiowb();
-CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
-</programlisting>
-
-      <para>
-	See tg3.c for a real world example of how to use <function>mmiowb
-	</function>
-      </para>
-
-      <para>
-	PCI ordering rules also guarantee that PIO read responses arrive
-	after any outstanding DMA writes from that bus, since for some devices
-	the result of a <function>readb</function> call may signal to the
-	driver that a DMA transaction is complete.  In many cases, however,
-	the driver may want to indicate that the next
-	<function>readb</function> call has no relation to any previous DMA
-	writes performed by the device.  The driver can use
-	<function>readb_relaxed</function> for these cases, although only
-	some platforms will honor the relaxed semantics.  Using the relaxed
-	read functions will provide significant performance benefits on
-	platforms that support it.  The qla2xxx driver provides examples
-	of how to use <function>readX_relaxed</function>.  In many cases,
-	a majority of the driver's <function>readX</function> calls can
-	safely be converted to <function>readX_relaxed</function> calls, since
-	only a few will indicate or depend on DMA completion.
-      </para>
-    </sect1>
-
-  </chapter>
-
-  <chapter id="port_space_accesses">
-    <title>Port Space Accesses</title>
-    <sect1 id="port_space_explained">
-      <title>Port Space Explained</title>
-
-      <para>
-	Another form of IO commonly supported is Port Space.  This is a
-	range of addresses separate to the normal memory address space.
-	Access to these addresses is generally not as fast as accesses
-	to the memory mapped addresses, and it also has a potentially
-	smaller address space.
-      </para>
-
-      <para>
-	Unlike memory mapped IO, no preparation is required
-	to access port space.
-      </para>
-
-    </sect1>
-    <sect1 id="accessing_port_space">
-      <title>Accessing Port Space</title>
-      <para>
-	Accesses to this space are provided through a set of functions
-	which allow 8-bit, 16-bit and 32-bit accesses; also
-	known as byte, word and long.  These functions are
-	<function>inb</function>, <function>inw</function>,
-	<function>inl</function>, <function>outb</function>,
-	<function>outw</function> and <function>outl</function>.
-      </para>
-
-      <para>
-	Some variants are provided for these functions.  Some devices
-	require that accesses to their ports are slowed down.  This
-	functionality is provided by appending a <function>_p</function>
-	to the end of the function.  There are also equivalents to memcpy.
-	The <function>ins</function> and <function>outs</function>
-	functions copy bytes, words or longs to the given port.
-      </para>
-    </sect1>
-
-  </chapter>
-
-  <chapter id="pubfunctions">
-     <title>Public Functions Provided</title>
-!Iarch/x86/include/asm/io.h
-!Elib/pci_iomap.c
-  </chapter>
-
-</book>

Documentation/DocBook/kgdb.tmpl

@@ -115,12 +115,12 @@
     </para>
     <para>
     If the architecture that you are using supports the kernel option
-    CONFIG_DEBUG_RODATA, you should consider turning it off.  This
+    CONFIG_STRICT_KERNEL_RWX, you should consider turning it off.  This
     option will prevent the use of software breakpoints because it
     marks certain regions of the kernel's memory space as read-only.
     If kgdb supports it for the architecture you are using, you can
     use hardware breakpoints if you desire to run with the
-    CONFIG_DEBUG_RODATA option turned on, else you need to turn off
+    CONFIG_STRICT_KERNEL_RWX option turned on, else you need to turn off
     this option.
     </para>
     <para>
@@ -135,7 +135,7 @@
     <para>Here is an example set of .config symbols to enable or
     disable for kgdb:
     <itemizedlist>
-    <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+    <listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem>
     <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
     <listitem><para>CONFIG_KGDB=y</para></listitem>
     <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
@@ -166,7 +166,7 @@
     </para>
     <para>Here is an example set of .config symbols to enable/disable kdb:
     <itemizedlist>
-    <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+    <listitem><para># CONFIG_STRICT_KERNEL_RWX is not set</para></listitem>
     <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
     <listitem><para>CONFIG_KGDB=y</para></listitem>
     <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>

Documentation/DocBook/libata.tmpl

@@ -1020,7 +1020,7 @@ and other resources, etc.
 	</itemizedlist>
 
 	<para>
-	Of errors detected as above, the followings are not ATA/ATAPI
+	Of errors detected as above, the following are not ATA/ATAPI
 	device errors but ATA bus errors and should be handled
 	according to <xref linkend="excatATAbusErr"/>.
 	</para>

Documentation/DocBook/regulator.tmpl

-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="regulator-api">
- <bookinfo>
-  <title>Voltage and current regulator API</title>
-
-  <authorgroup>
-   <author>
-    <firstname>Liam</firstname>
-    <surname>Girdwood</surname>
-    <affiliation>
-     <address>
-      <email>lrg@slimlogic.co.uk</email>
-     </address>
-    </affiliation>
-   </author>
-   <author>
-    <firstname>Mark</firstname>
-    <surname>Brown</surname>
-    <affiliation>
-     <orgname>Wolfson Microelectronics</orgname>
-     <address>
-      <email>broonie@opensource.wolfsonmicro.com</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>2007-2008</year>
-   <holder>Wolfson Microelectronics</holder>
-  </copyright>
-  <copyright>
-   <year>2008</year>
-   <holder>Liam Girdwood</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License version 2 as published by the Free Software Foundation.
-   </para>
-
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="intro">
-    <title>Introduction</title>
-    <para>
-	This framework is designed to provide a standard kernel
-	interface to control voltage and current regulators.
-    </para>
-    <para>
-	The intention is to allow systems to dynamically control
-	regulator power output in order to save power and prolong
-	battery life.  This applies to both voltage regulators (where
-	voltage output is controllable) and current sinks (where current
-	limit is controllable).
-    </para>
-    <para>
-	Note that additional (and currently more complete) documentation
-	is available in the Linux kernel source under
-	<filename>Documentation/power/regulator</filename>.
-    </para>
-
-    <sect1 id="glossary">
-       <title>Glossary</title>
-       <para>
-	The regulator API uses a number of terms which may not be
-	familiar:
-       </para>
-       <glossary>
-
-         <glossentry>
-	   <glossterm>Regulator</glossterm>
-	   <glossdef>
-	     <para>
-	Electronic device that supplies power to other devices.  Most
-	regulators can enable and disable their output and some can also
-	control their output voltage or current.
-	     </para>
-	   </glossdef>
-         </glossentry>
-
-	 <glossentry>
-	   <glossterm>Consumer</glossterm>
-	   <glossdef>
-	     <para>
-	Electronic device which consumes power provided by a regulator.
-	These may either be static, requiring only a fixed supply, or
-	dynamic, requiring active management of the regulator at
-	runtime.
-	     </para>
-	   </glossdef>
-	 </glossentry>
-
-	 <glossentry>
-	   <glossterm>Power Domain</glossterm>
-	   <glossdef>
-	     <para>
-	The electronic circuit supplied by a given regulator, including
-	the regulator and all consumer devices.  The configuration of
-	the regulator is shared between all the components in the
-	circuit.
-	     </para>
-	   </glossdef>
-	 </glossentry>
-
-	 <glossentry>
-	   <glossterm>Power Management Integrated Circuit</glossterm>
-	   <acronym>PMIC</acronym>
-	   <glossdef>
-	     <para>
-	An IC which contains numerous regulators and often also other
-	subsystems.  In an embedded system the primary PMIC is often
-	equivalent to a combination of the PSU and southbridge in a
-	desktop system.
-	     </para>
-	   </glossdef>
-	 </glossentry>
-	</glossary>
-     </sect1>
-  </chapter>
-
-  <chapter id="consumer">
-     <title>Consumer driver interface</title>
-     <para>
-       This offers a similar API to the kernel clock framework.
-       Consumer drivers use <link
-       linkend='API-regulator-get'>get</link> and <link
-       linkend='API-regulator-put'>put</link> operations to acquire and
-       release regulators.  Functions are
-       provided to <link linkend='API-regulator-enable'>enable</link>
-       and <link linkend='API-regulator-disable'>disable</link> the
-       regulator and to get and set the runtime parameters of the
-       regulator.
-     </para>
-     <para>
-       When requesting regulators consumers use symbolic names for their
-       supplies, such as "Vcc", which are mapped into actual regulator
-       devices by the machine interface.
-     </para>
-     <para>
-	A stub version of this API is provided when the regulator
-	framework is not in use in order to minimise the need to use
-	ifdefs.
-     </para>
-
-     <sect1 id="consumer-enable">
-       <title>Enabling and disabling</title>
-       <para>
-         The regulator API provides reference counted enabling and
-	 disabling of regulators. Consumer devices use the <function><link
-	 linkend='API-regulator-enable'>regulator_enable</link></function>
-	 and <function><link
-	 linkend='API-regulator-disable'>regulator_disable</link>
-	 </function> functions to enable and disable regulators.  Calls
-	 to the two functions must be balanced.
-       </para>
-       <para>
-         Note that since multiple consumers may be using a regulator and
-	 machine constraints may not allow the regulator to be disabled
-	 there is no guarantee that calling
-	 <function>regulator_disable</function> will actually cause the
-	 supply provided by the regulator to be disabled. Consumer
-	 drivers should assume that the regulator may be enabled at all
-	 times.
-       </para>
-     </sect1>
-
-     <sect1 id="consumer-config">
-       <title>Configuration</title>
-       <para>
-         Some consumer devices may need to be able to dynamically
-	 configure their supplies.  For example, MMC drivers may need to
-	 select the correct operating voltage for their cards.  This may
-	 be done while the regulator is enabled or disabled.
-       </para>
-       <para>
-	 The <function><link
-	 linkend='API-regulator-set-voltage'>regulator_set_voltage</link>
-	 </function> and <function><link
-	 linkend='API-regulator-set-current-limit'
-	 >regulator_set_current_limit</link>
-	 </function> functions provide the primary interface for this.
-	 Both take ranges of voltages and currents, supporting drivers
-	 that do not require a specific value (eg, CPU frequency scaling
-	 normally permits the CPU to use a wider range of supply
-	 voltages at lower frequencies but does not require that the
-	 supply voltage be lowered).  Where an exact value is required
-	 both minimum and maximum values should be identical.
-       </para>
-     </sect1>
-
-     <sect1 id="consumer-callback">
-       <title>Callbacks</title>
-       <para>
-	  Callbacks may also be <link
-	  linkend='API-regulator-register-notifier'>registered</link>
-	  for events such as regulation failures.
-       </para>
-     </sect1>
-   </chapter>
-
-   <chapter id="driver">
-     <title>Regulator driver interface</title>
-     <para>
-       Drivers for regulator chips <link
-       linkend='API-regulator-register'>register</link> the regulators
-       with the regulator core, providing operations structures to the
-       core.  A <link
-       linkend='API-regulator-notifier-call-chain'>notifier</link> interface
-       allows error conditions to be reported to the core.
-     </para>
-     <para>
-       Registration should be triggered by explicit setup done by the
-       platform, supplying a <link
-       linkend='API-struct-regulator-init-data'>struct
-       regulator_init_data</link> for the regulator containing
-       <link linkend='machine-constraint'>constraint</link> and
-       <link linkend='machine-supply'>supply</link> information.
-     </para>
-   </chapter>
-
-   <chapter id="machine">
-     <title>Machine interface</title>
-     <para>
-       This interface provides a way to define how regulators are
-       connected to consumers on a given system and what the valid
-       operating parameters are for the system.
-     </para>
-
-     <sect1 id="machine-supply">
-       <title>Supplies</title>
-       <para>
-         Regulator supplies are specified using <link
-	 linkend='API-struct-regulator-consumer-supply'>struct
-	 regulator_consumer_supply</link>.  This is done at
-	 <link linkend='driver'>driver registration
-	 time</link> as part of the machine constraints.
-       </para>
-     </sect1>
-
-     <sect1 id="machine-constraint">
-       <title>Constraints</title>
-       <para>
-	 As well as defining the connections the machine interface
-	 also provides constraints defining the operations that
-	 clients are allowed to perform and the parameters that may be
-	 set.  This is required since generally regulator devices will
-	 offer more flexibility than it is safe to use on a given
-	 system, for example supporting higher supply voltages than the
-	 consumers are rated for.
-       </para>
-       <para>
-	 This is done at <link linkend='driver'>driver
-	 registration time</link> by providing a <link
-	 linkend='API-struct-regulation-constraints'>struct
-	 regulation_constraints</link>.
-       </para>
-       <para>
-         The constraints may also specify an initial configuration for the
-         regulator in the constraints, which is particularly useful for
-         use with static consumers.
-       </para>
-     </sect1>
-  </chapter>
-
-  <chapter id="api">
-    <title>API reference</title>
-    <para>
-      Due to limitations of the kernel documentation framework and the
-      existing layout of the source code the entire regulator API is
-      documented here.
-    </para>
-!Iinclude/linux/regulator/consumer.h
-!Iinclude/linux/regulator/machine.h
-!Iinclude/linux/regulator/driver.h
-!Edrivers/regulator/core.c
-  </chapter>
-</book>

Documentation/IPMI.txt

@@ -257,7 +257,7 @@ and tell you when they come and go.
 
 Creating the User
 
-To user the message handler, you must first create a user using
+To use the message handler, you must first create a user using
 ipmi_create_user.  The interface number specifies which SMI you want
 to connect to, and you must supply callback functions to be called
 when data comes in.  The callback function can run at interrupt level,

Documentation/Makefile.sphinx

@@ -43,7 +43,7 @@ ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
 I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
 
 # commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
-loop_cmd = $(echo-cmd) $(cmd_$(1))
+loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
 
 # $2 sphinx builder e.g. "html"
 # $3 name of the build subfolder / e.g. "media", used as:
@@ -54,7 +54,8 @@ loop_cmd = $(echo-cmd) $(cmd_$(1))
 #    e.g. "media" for the linux-tv book-set at ./Documentation/media
 
 quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
-      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2;\
+      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
+	PYTHONDONTWRITEBYTECODE=1 \
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
 	$(SPHINXBUILD) \
 	-b $2 \
@@ -63,13 +64,16 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
 	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
 	$(ALLSPHINXOPTS) \
 	$(abspath $(srctree)/$(src)/$5) \
-	$(abspath $(BUILDDIR)/$3/$4);
+	$(abspath $(BUILDDIR)/$3/$4)
 
 htmldocs:
-	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
+
+linkcheckdocs:
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
 
 latexdocs:
-	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
 
 ifeq ($(HAVE_PDFLATEX),0)
 
@@ -80,27 +84,34 @@ pdfdocs:
 else # HAVE_PDFLATEX
 
 pdfdocs: latexdocs
-	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex;)
+	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
 
 endif # HAVE_PDFLATEX
 
 epubdocs:
-	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
 
 xmldocs:
-	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
+
+endif # HAVE_SPHINX
+
+# The following targets are independent of HAVE_SPHINX, and the rules should
+# work or silently pass without Sphinx.
 
 # no-ops for the Sphinx toolchain
 sgmldocs:
+	@:
 psdocs:
+	@:
 mandocs:
+	@:
 installmandocs:
+	@:
 
 cleandocs:
 	$(Q)rm -rf $(BUILDDIR)
-	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) -C Documentation/media clean
-
-endif # HAVE_SPHINX
+	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
 
 dochelp:
 	@echo  ' Linux kernel internal documentation in different formats (Sphinx):'
@@ -109,6 +120,7 @@ dochelp:
 	@echo  '  pdfdocs         - PDF'
 	@echo  '  epubdocs        - EPUB'
 	@echo  '  xmldocs         - XML'
+	@echo  '  linkcheckdocs   - check for broken external links (will connect to external hosts)'
 	@echo  '  cleandocs       - clean all generated files'
 	@echo
 	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'

Documentation/PCI/MSI-HOWTO.txt

@@ -162,8 +162,6 @@ The following old APIs to enable and disable MSI or MSI-X interrupts should
 not be used in new code:
 
   pci_enable_msi()		/* deprecated */
-  pci_enable_msi_range()	/* deprecated */
-  pci_enable_msi_exact()	/* deprecated */
   pci_disable_msi()		/* deprecated */
   pci_enable_msix_range()	/* deprecated */
   pci_enable_msix_exact()	/* deprecated */
@@ -268,5 +266,5 @@ or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 
 It is also worth checking the device driver to see whether it supports MSIs.
-For example, it may contain calls to pci_enable_msi_range() or
-pci_enable_msix_range().
+For example, it may contain calls to pci_irq_alloc_vectors() with the
+PCI_IRQ_MSI or PCI_IRQ_MSIX flags.

Documentation/PCI/PCIEBUS-HOWTO.txt

@@ -161,21 +161,13 @@ Since all service drivers of a PCI-PCI Bridge Port device are
 allowed to run simultaneously, below lists a few of possible resource
 conflicts with proposed solutions.
 
-6.1 MSI Vector Resource
-
-The MSI capability structure enables a device software driver to call
-pci_enable_msi to request MSI based interrupts. Once MSI interrupts
-are enabled on a device, it stays in this mode until a device driver
-calls pci_disable_msi to disable MSI interrupts and revert back to
-INTx emulation mode. Since service drivers of the same PCI-PCI Bridge
-port share the same physical device, if an individual service driver
-calls pci_enable_msi/pci_disable_msi it may result unpredictable
-behavior. For example, two service drivers run simultaneously on the
-same physical Root Port. Both service drivers call pci_enable_msi to
-request MSI based interrupts. A service driver may not know whether
-any other service drivers have run on this Root Port. If either one
-of them calls pci_disable_msi, it puts the other service driver
-in a wrong interrupt mode.
+6.1 MSI and MSI-X Vector Resource
+
+Once MSI or MSI-X interrupts are enabled on a device, it stays in this
+mode until they are disabled again.  Since service drivers of the same
+PCI-PCI Bridge port share the same physical device, if an individual
+service driver enables or disables MSI/MSI-X mode it may result
+unpredictable behavior.
 
 To avoid this situation all service drivers are not permitted to
 switch interrupt mode on its device. The PCI Express Port Bus driver
@@ -187,17 +179,6 @@ driver. Service drivers should use (struct pcie_device*)dev->irq to
 call request_irq/free_irq. In addition, the interrupt mode is stored
 in the field interrupt_mode of struct pcie_device.
 
-6.2 MSI-X Vector Resources
-
-Similar to the MSI a device driver for an MSI-X capable device can
-call pci_enable_msix to request MSI-X interrupts. All service drivers
-are not permitted to switch interrupt mode on its device. The PCI
-Express Port Bus driver is responsible for determining the interrupt
-mode and this should be transparent to service drivers. Any attempt
-by service driver to call pci_enable_msix/pci_disable_msix may
-result unpredictable behavior. Service drivers should use
-(struct pcie_device*)dev->irq and call request_irq/free_irq.
-
 6.3 PCI Memory/IO Mapped Regions
 
 Service drivers for PCI Express Power Management (PME), Advanced

Documentation/PCI/pci-error-recovery.txt

@@ -78,7 +78,6 @@ struct pci_error_handlers
 {
 	int (*error_detected)(struct pci_dev *dev, enum pci_channel_state);
 	int (*mmio_enabled)(struct pci_dev *dev);
-	int (*link_reset)(struct pci_dev *dev);
 	int (*slot_reset)(struct pci_dev *dev);
 	void (*resume)(struct pci_dev *dev);
 };
@@ -104,8 +103,7 @@ if it implements any, it must implement error_detected(). If a callback
 is not implemented, the corresponding feature is considered unsupported.
 For example, if mmio_enabled() and resume() aren't there, then it
 is assumed that the driver is not doing any direct recovery and requires
-a slot reset. If link_reset() is not implemented, the card is assumed to
-not care about link resets. Typically a driver will want to know about
+a slot reset.  Typically a driver will want to know about
 a slot_reset().
 
 The actual steps taken by a platform to recover from a PCI error
@@ -232,25 +230,9 @@ proceeds to STEP 4 (Slot Reset)
 
 STEP 3: Link Reset
 ------------------
-The platform resets the link, and then calls the link_reset() callback
-on all affected device drivers.  This is a PCI-Express specific state
+The platform resets the link.  This is a PCI-Express specific step
 and is done whenever a non-fatal error has been detected that can be
-"solved" by resetting the link. This call informs the driver of the
-reset and the driver should check to see if the device appears to be
-in working condition.
-
-The driver is not supposed to restart normal driver I/O operations
-at this point.  It should limit itself to "probing" the device to
-check its recoverability status. If all is right, then the platform
-will call resume() once all drivers have ack'd link_reset().
-
-	Result codes:
-		(identical to STEP 3 (MMIO Enabled)
-
-The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
-(Resume Operations).
-
->>> The current powerpc implementation does not implement this callback.
+"solved" by resetting the link.
 
 STEP 4: Slot Reset
 ------------------

Documentation/PCI/pci.txt

@@ -382,18 +382,18 @@ The fundamental difference between MSI and MSI-X is how multiple
 "vectors" get allocated. MSI requires contiguous blocks of vectors
 while MSI-X can allocate several individual ones.
 
-MSI capability can be enabled by calling pci_enable_msi() or
-pci_enable_msix() before calling request_irq(). This causes
-the PCI support to program CPU vector data into the PCI device
-capability registers.
-
-If your PCI device supports both, try to enable MSI-X first.
-Only one can be enabled at a time.  Many architectures, chip-sets,
-or BIOSes do NOT support MSI or MSI-X and the call to pci_enable_msi/msix
-will fail. This is important to note since many drivers have
-two (or more) interrupt handlers: one for MSI/MSI-X and another for IRQs.
-They choose which handler to register with request_irq() based on the
-return value from pci_enable_msi/msix().
+MSI capability can be enabled by calling pci_alloc_irq_vectors() with the
+PCI_IRQ_MSI and/or PCI_IRQ_MSIX flags before calling request_irq(). This
+causes the PCI support to program CPU vector data into the PCI device
+capability registers. Many architectures, chip-sets, or BIOSes do NOT
+support MSI or MSI-X and a call to pci_alloc_irq_vectors with just
+the PCI_IRQ_MSI and PCI_IRQ_MSIX flags will fail, so try to always
+specify PCI_IRQ_LEGACY as well.
+
+Drivers that have different interrupt handlers for MSI/MSI-X and
+legacy INTx should chose the right one based on the msi_enabled
+and msix_enabled flags in the pci_dev structure after calling
+pci_alloc_irq_vectors.
 
 There are (at least) two really good reasons for using MSI:
 1) MSI is an exclusive interrupt vector by definition.

Documentation/PCI/pcieaer-howto.txt

@@ -256,7 +256,7 @@ After reboot with new kernel or insert the module, a device file named
 
 Then, you need a user space tool named aer-inject, which can be gotten
 from:
-    http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+    https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
 
 More information about aer-inject can be found in the document comes
 with its source code.

Documentation/RCU/Design/Data-Structures/Data-Structures.html

@@ -4,7 +4,7 @@
         <head><title>A Tour Through TREE_RCU's Data Structures [LWN.net]</title>
         <meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
 
-           <p>January 27, 2016</p>
+           <p>December 18, 2016</p>
            <p>This article was contributed by Paul E.&nbsp;McKenney</p>
 
 <h3>Introduction</h3>
@@ -31,9 +31,6 @@ to each other.
 	Accessor Functions</a>
 </ol>
 
-At the end we have the
-<a href="#Answers to Quick Quizzes">answers to the quick quizzes</a>.
-
 <h3><a name="Data-Structure Relationships">Data-Structure Relationships</a></h3>
 
 <p>RCU is for all intents and purposes a large state machine, and its