提交 032ace7e 编写于 作者: M Michael Ellerman 提交者: Paul Mackerras

[POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c

The code in xics.c to setup the i8259 cascaded irq handler is not really
xics specific, so move it into setup.c - we will clean this up further in
a subsequent patch.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 47b9d9bd
......@@ -124,6 +124,51 @@ void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
desc->chip->eoi(irq);
}
static void __init xics_setup_8259_cascade(void)
{
struct device_node *np, *old, *found = NULL;
int cascade, naddr;
const u32 *addrp;
unsigned long intack = 0;
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "chrp,iic")) {
found = np;
break;
}
if (found == NULL) {
printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
return;
}
cascade = irq_of_parse_and_map(found, 0);
if (cascade == NO_IRQ) {
printk(KERN_ERR "xics: failed to map cascade interrupt");
return;
}
pr_debug("xics: cascade mapped to irq %d\n", cascade);
for (old = of_node_get(found); old != NULL ; old = np) {
np = of_get_parent(old);
of_node_put(old);
if (np == NULL)
break;
if (strcmp(np->name, "pci") != 0)
continue;
addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
if (addrp == NULL)
continue;
naddr = of_n_addr_cells(np);
intack = addrp[naddr-1];
if (naddr > 1)
intack |= ((unsigned long)addrp[naddr-2]) << 32;
}
if (intack)
printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
i8259_init(found, intack);
of_node_put(found);
set_irq_chained_handler(cascade, pseries_8259_cascade);
}
static void __init pseries_mpic_init_IRQ(void)
{
struct device_node *np, *old, *cascade = NULL;
......@@ -203,6 +248,12 @@ static void __init pseries_mpic_init_IRQ(void)
set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
}
static void __init pseries_xics_init_IRQ(void)
{
xics_init_IRQ();
xics_setup_8259_cascade();
}
static void pseries_lpar_enable_pmcs(void)
{
unsigned long set, reset;
......@@ -232,7 +283,7 @@ static void __init pseries_discover_pic(void)
smp_init_pseries_mpic();
return;
} else if (strstr(typep, "ppc-xicp")) {
ppc_md.init_IRQ = xics_init_IRQ;
ppc_md.init_IRQ = pseries_xics_init_IRQ;
setup_kexec_cpu_down_xics();
smp_init_pseries_xics();
return;
......
......@@ -655,52 +655,6 @@ static void __init xics_init_one_node(struct device_node *np,
}
}
static void __init xics_setup_8259_cascade(void)
{
struct device_node *np, *old, *found = NULL;
int cascade, naddr;
const u32 *addrp;
unsigned long intack = 0;
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "chrp,iic")) {
found = np;
break;
}
if (found == NULL) {
printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
return;
}
cascade = irq_of_parse_and_map(found, 0);
if (cascade == NO_IRQ) {
printk(KERN_ERR "xics: failed to map cascade interrupt");
return;
}
pr_debug("xics: cascade mapped to irq %d\n", cascade);
for (old = of_node_get(found); old != NULL ; old = np) {
np = of_get_parent(old);
of_node_put(old);
if (np == NULL)
break;
if (strcmp(np->name, "pci") != 0)
continue;
addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
if (addrp == NULL)
continue;
naddr = of_n_addr_cells(np);
intack = addrp[naddr-1];
if (naddr > 1)
intack |= ((unsigned long)addrp[naddr-2]) << 32;
}
if (intack)
printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
i8259_init(found, intack);
of_node_put(found);
set_irq_chained_handler(cascade, pseries_8259_cascade);
}
void __init xics_init_IRQ(void)
{
struct device_node *np;
......@@ -733,8 +687,6 @@ void __init xics_init_IRQ(void)
xics_setup_cpu();
xics_setup_8259_cascade();
ppc64_boot_msg(0x21, "XICS Done");
}
......
......@@ -28,7 +28,4 @@ struct xics_ipi_struct {
extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
struct irq_desc;
extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc);
#endif /* _POWERPC_KERNEL_XICS_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册