提交 02df8b93 编写于 作者: V Venkatesh Pallipadi 提交者: Len Brown

[ACPI] enable C2 and C3 idle power states on SMP

http://bugzilla.kernel.org/show_bug.cgi?id=4401Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
上级 17e9c78a
......@@ -2,3 +2,7 @@ obj-$(CONFIG_ACPI_BOOT) := boot.o
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += cstate.o
endif
/*
* arch/i386/kernel/acpi/cstate.c
*
* Copyright (C) 2005 Intel Corporation
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* - Added _PDC for SMP C-states on Intel CPUs
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
#include <asm/acpi.h>
static void acpi_processor_power_init_intel_pdc(struct acpi_processor_power
*pow)
{
struct acpi_object_list *obj_list;
union acpi_object *obj;
u32 *buf;
/* allocate and initialize pdc. It will be used later. */
obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL);
if (!obj_list) {
printk(KERN_ERR "Memory allocation error\n");
return;
}
obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
if (!obj) {
printk(KERN_ERR "Memory allocation error\n");
kfree(obj_list);
return;
}
buf = kmalloc(12, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "Memory allocation error\n");
kfree(obj);
kfree(obj_list);
return;
}
buf[0] = ACPI_PDC_REVISION_ID;
buf[1] = 1;
buf[2] = ACPI_PDC_C_CAPABILITY_SMP;
obj->type = ACPI_TYPE_BUFFER;
obj->buffer.length = 12;
obj->buffer.pointer = (u8 *) buf;
obj_list->count = 1;
obj_list->pointer = obj;
pow->pdc = obj_list;
return;
}
/* Initialize _PDC data based on the CPU vendor */
void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
unsigned int cpu)
{
struct cpuinfo_x86 *c = cpu_data + cpu;
pow->pdc = NULL;
if (c->x86_vendor == X86_VENDOR_INTEL)
acpi_processor_power_init_intel_pdc(pow);
return;
}
EXPORT_SYMBOL(acpi_processor_power_init_pdc);
/*
* Initialize bm_flags based on the CPU cache properties
* On SMP it depends on cache configuration
* - When cache is not shared among all CPUs, we flush cache
* before entering C3.
* - When cache is shared among all CPUs, we use bm_check
* mechanism as in UP case
*
* This routine is called only after all the CPUs are online
*/
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu)
{
struct cpuinfo_x86 *c = cpu_data + cpu;
flags->bm_check = 0;
if (num_online_cpus() == 1)
flags->bm_check = 1;
else if (c->x86_vendor == X86_VENDOR_INTEL) {
/*
* Today all CPUs that support C3 share cache.
* TBD: This needs to look at cache shared map, once
* multi-core detection patch makes to the base.
*/
flags->bm_check = 1;
}
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
......@@ -375,7 +375,7 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
arg0.buffer.pointer = (u8 *) arg0_buf;
arg0_buf[0] = ACPI_PDC_REVISION_ID;
arg0_buf[1] = 1;
arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP | ACPI_PDC_EST_CAPABILITY_MSR;
arg0_buf[2] = ACPI_PDC_EST_CAPABILITY_SMP_MSR;
p.pdc = &arg_list;
......
......@@ -255,6 +255,43 @@ acpi_processor_errata (
}
/* --------------------------------------------------------------------------
Common ACPI processor fucntions
-------------------------------------------------------------------------- */
/*
* _PDC is required for a BIOS-OS handshake for most of the newer
* ACPI processor features.
*/
int acpi_processor_set_pdc(struct acpi_processor *pr,
struct acpi_object_list *pdc_in)
{
acpi_status status = AE_OK;
u32 arg0_buf[3];
union acpi_object arg0 = {ACPI_TYPE_BUFFER};
struct acpi_object_list no_object = {1, &arg0};
struct acpi_object_list *pdc;
ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
arg0.buffer.length = 12;
arg0.buffer.pointer = (u8 *) arg0_buf;
arg0_buf[0] = ACPI_PDC_REVISION_ID;
arg0_buf[1] = 0;
arg0_buf[2] = 0;
pdc = (pdc_in) ? pdc_in : &no_object;
status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
if ((ACPI_FAILURE(status)) && (pdc_in))
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
return_VALUE(status);
}
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
......
......@@ -6,6 +6,8 @@
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
* Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* - Added support for C3 on SMP
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
......@@ -142,7 +144,7 @@ acpi_processor_power_activate (
switch (old->type) {
case ACPI_STATE_C3:
/* Disable bus master reload */
if (new->type != ACPI_STATE_C3)
if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0, ACPI_MTX_DO_NOT_LOCK);
break;
}
......@@ -152,7 +154,7 @@ acpi_processor_power_activate (
switch (new->type) {
case ACPI_STATE_C3:
/* Enable bus master reload */
if (old->type != ACPI_STATE_C3)
if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1, ACPI_MTX_DO_NOT_LOCK);
break;
}
......@@ -163,6 +165,9 @@ acpi_processor_power_activate (
}
static atomic_t c3_cpu_count;
static void acpi_processor_idle (void)
{
struct acpi_processor *pr = NULL;
......@@ -297,8 +302,22 @@ static void acpi_processor_idle (void)
break;
case ACPI_STATE_C3:
/* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1, ACPI_MTX_DO_NOT_LOCK);
if (pr->flags.bm_check) {
if (atomic_inc_return(&c3_cpu_count) ==
num_online_cpus()) {
/*
* All CPUs are trying to go to C3
* Disable bus master arbitration
*/
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
}
} else {
/* SMP with no shared cache... Invalidate cache */
ACPI_FLUSH_CPU_CACHE();
}
/* Get start time (ticks) */
t1 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Invoke C3 */
......@@ -307,8 +326,12 @@ static void acpi_processor_idle (void)
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Get end time (ticks) */
t2 = inl(acpi_fadt.xpm_tmr_blk.address);
/* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
if (pr->flags.bm_check) {
/* Enable bus master arbitration */
atomic_dec(&c3_cpu_count);
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0, ACPI_MTX_DO_NOT_LOCK);
}
/* Re-enable interrupts */
local_irq_enable();
/* Compute time (ticks) that we were actually asleep */
......@@ -552,9 +575,6 @@ static int acpi_processor_get_power_info_cst (struct acpi_processor *pr)
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_cst");
if (errata.smp)
return_VALUE(-ENODEV);
if (nocst)
return_VALUE(-ENODEV);
......@@ -687,13 +707,6 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
return_VOID;
}
/* We're (currently) only supporting C2 on UP */
else if (errata.smp) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C2 not supported in SMP mode\n"));
return_VOID;
}
/*
* Otherwise we've met all of our C2 requirements.
* Normalize the C2 latency to expidite policy
......@@ -709,6 +722,8 @@ static void acpi_processor_power_verify_c3(
struct acpi_processor *pr,
struct acpi_processor_cx *cx)
{
static int bm_check_flag;
ACPI_FUNCTION_TRACE("acpi_processor_get_power_verify_c3");
if (!cx->address)
......@@ -725,20 +740,6 @@ static void acpi_processor_power_verify_c3(
return_VOID;
}
/* bus mastering control is necessary */
else if (!pr->flags.bm_control) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C3 support requires bus mastering control\n"));
return_VOID;
}
/* We're (currently) only supporting C2 on UP */
else if (errata.smp) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C3 not supported in SMP mode\n"));
return_VOID;
}
/*
* PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
* DMA transfers are used by any ISA device to avoid livelock.
......@@ -752,6 +753,39 @@ static void acpi_processor_power_verify_c3(
return_VOID;
}
/* All the logic here assumes flags.bm_check is same across all CPUs */
if (!bm_check_flag) {
/* Determine whether bm_check is needed based on CPU */
acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
bm_check_flag = pr->flags.bm_check;
} else {
pr->flags.bm_check = bm_check_flag;
}
if (pr->flags.bm_check) {
printk("Disabling BM access before entering C3\n");
/* bus mastering control is necessary */
if (!pr->flags.bm_control) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"C3 support requires bus mastering control\n"));
return_VOID;
}
} else {
printk("Invalidating cache before entering C3\n");
/*
* WBINVD should be set in fadt, for C3 state to be
* supported on when bm_check is not required.
*/
if (acpi_fadt.wb_invd != 1) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Cache invalidation should work properly"
" for C3 to be enabled on SMP systems\n"));
return_VOID;
}
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD,
0, ACPI_MTX_DO_NOT_LOCK);
}
/*
* Otherwise we've met all of our C3 requirements.
* Normalize the C3 latency to expidite policy. Enable
......@@ -760,7 +794,6 @@ static void acpi_processor_power_verify_c3(
*/
cx->valid = 1;
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
pr->flags.bm_check = 1;
return_VOID;
}
......@@ -848,7 +881,7 @@ int acpi_processor_cst_has_changed (struct acpi_processor *pr)
if (!pr)
return_VALUE(-EINVAL);
if (errata.smp || nocst) {
if ( nocst) {
return_VALUE(-ENODEV);
}
......@@ -948,7 +981,6 @@ static struct file_operations acpi_processor_power_fops = {
.release = single_release,
};
int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device)
{
acpi_status status = 0;
......@@ -965,7 +997,10 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev
first_run++;
}
if (!errata.smp && (pr->id == 0) && acpi_fadt.cst_cnt && !nocst) {
if (!pr)
return_VALUE(-EINVAL);
if (acpi_fadt.cst_cnt && !nocst) {
status = acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
......@@ -973,6 +1008,8 @@ int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *dev
}
}
acpi_processor_power_init_pdc(&(pr->power), pr->id);
acpi_processor_set_pdc(pr, pr->power.pdc);
acpi_processor_get_power_info(pr);
/*
......
......@@ -165,37 +165,6 @@ void acpi_processor_ppc_exit(void) {
acpi_processor_ppc_status &= ~PPC_REGISTERED;
}
/*
* when registering a cpufreq driver with this ACPI processor driver, the
* _PCT and _PSS structures are read out and written into struct
* acpi_processor_performance.
*/
static int acpi_processor_set_pdc (struct acpi_processor *pr)
{
acpi_status status = AE_OK;
u32 arg0_buf[3];
union acpi_object arg0 = {ACPI_TYPE_BUFFER};
struct acpi_object_list no_object = {1, &arg0};
struct acpi_object_list *pdc;
ACPI_FUNCTION_TRACE("acpi_processor_set_pdc");
arg0.buffer.length = 12;
arg0.buffer.pointer = (u8 *) arg0_buf;
arg0_buf[0] = ACPI_PDC_REVISION_ID;
arg0_buf[1] = 0;
arg0_buf[2] = 0;
pdc = (pr->performance->pdc) ? pr->performance->pdc : &no_object;
status = acpi_evaluate_object(pr->handle, "_PDC", pdc, NULL);
if ((ACPI_FAILURE(status)) && (pr->performance->pdc))
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Error evaluating _PDC, using legacy perf. control...\n"));
return_VALUE(status);
}
static int
acpi_processor_get_performance_control (
......@@ -357,7 +326,7 @@ acpi_processor_get_performance_info (
if (!pr || !pr->performance || !pr->handle)
return_VALUE(-EINVAL);
acpi_processor_set_pdc(pr);
acpi_processor_set_pdc(pr, pr->performance->pdc);
status = acpi_get_handle(pr->handle, "_PCT", &handle);
if (ACPI_FAILURE(status)) {
......
/* _PDC bit definition for Intel processors */
#ifndef __PDC_INTEL_H__
#define __PDC_INTEL_H__
#define ACPI_PDC_P_FFH (0x0001)
#define ACPI_PDC_C_C1_HALT (0x0002)
#define ACPI_PDC_T_FFH (0x0004)
#define ACPI_PDC_SMP_C1PT (0x0008)
#define ACPI_PDC_SMP_C2C3 (0x0010)
#define ACPI_PDC_SMP_P_SWCOORD (0x0020)
#define ACPI_PDC_SMP_C_SWCOORD (0x0040)
#define ACPI_PDC_SMP_T_SWCOORD (0x0080)
#define ACPI_PDC_C_C1_FFH (0x0100)
#define ACPI_PDC_EST_CAPABILITY_SMP (ACPI_PDC_SMP_C1PT | \
ACPI_PDC_C_C1_HALT)
#define ACPI_PDC_EST_CAPABILITY_SMP_MSR (ACPI_PDC_EST_CAPABILITY_SMP | \
ACPI_PDC_P_FFH)
#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \
ACPI_PDC_SMP_C1PT | \
ACPI_PDC_C_C1_HALT)
#endif /* __PDC_INTEL_H__ */
......@@ -4,6 +4,8 @@
#include <linux/kernel.h>
#include <linux/config.h>
#include <asm/acpi.h>
#define ACPI_PROCESSOR_BUSY_METRIC 10
#define ACPI_PROCESSOR_MAX_POWER 8
......@@ -14,6 +16,8 @@
#define ACPI_PROCESSOR_MAX_THROTTLE 250 /* 25% */
#define ACPI_PROCESSOR_MAX_DUTY_WIDTH 4
#define ACPI_PDC_REVISION_ID 0x1
/* Power Management */
struct acpi_processor_cx;
......@@ -59,6 +63,9 @@ struct acpi_processor_power {
u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
/* the _PDC objects passed by the driver, if any */
struct acpi_object_list *pdc;
};
/* Performance Management */
......@@ -82,8 +89,6 @@ struct acpi_processor_px {
acpi_integer status; /* success indicator */
};
#define ACPI_PDC_REVISION_ID 0x1
struct acpi_processor_performance {
unsigned int state;
unsigned int platform_limit;
......@@ -179,7 +184,32 @@ int acpi_processor_notify_smm(struct module *calling_module);
extern struct acpi_processor *processors[NR_CPUS];
extern struct acpi_processor_errata errata;
int acpi_processor_set_pdc(struct acpi_processor *pr,
struct acpi_object_list *pdc_in);
#ifdef ARCH_HAS_POWER_PDC_INIT
void acpi_processor_power_init_pdc(struct acpi_processor_power *pow,
unsigned int cpu);
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu);
#else
static inline void acpi_processor_power_init_pdc(
struct acpi_processor_power *pow, unsigned int cpu)
{
pow->pdc = NULL;
return;
}
static inline void acpi_processor_power_init_bm_check(
struct acpi_processor_flags *flags, unsigned int cpu)
{
flags->bm_check = 1;
return;
}
#endif
/* in processor_perflib.c */
#ifdef CONFIG_CPU_FREQ
void acpi_processor_ppc_init(void);
void acpi_processor_ppc_exit(void);
......
......@@ -28,6 +28,8 @@
#ifdef __KERNEL__
#include <acpi/pdc_intel.h>
#include <asm/system.h> /* defines cmpxchg */
#define COMPILER_DEPENDENT_INT64 long long
......@@ -101,12 +103,6 @@ __acpi_release_global_lock (unsigned int *lock)
:"=r"(n_hi), "=r"(n_lo) \
:"0"(n_hi), "1"(n_lo))
/*
* Refer Intel ACPI _PDC support document for bit definitions
*/
#define ACPI_PDC_EST_CAPABILITY_SMP 0xa
#define ACPI_PDC_EST_CAPABILITY_MSR 0x1
#ifdef CONFIG_ACPI_BOOT
extern int acpi_lapic;
extern int acpi_ioapic;
......@@ -185,6 +181,8 @@ extern void acpi_reserve_bootmem(void);
extern u8 x86_acpiid_to_apicid[];
#define ARCH_HAS_POWER_PDC_INIT 1
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
......@@ -28,6 +28,8 @@
#ifdef __KERNEL__
#include <acpi/pdc_intel.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
......@@ -99,12 +101,6 @@ __acpi_release_global_lock (unsigned int *lock)
:"=r"(n_hi), "=r"(n_lo) \
:"0"(n_hi), "1"(n_lo))
/*
* Refer Intel ACPI _PDC support document for bit definitions
*/
#define ACPI_PDC_EST_CAPABILITY_SMP 0xa
#define ACPI_PDC_EST_CAPABILITY_MSR 0x1
#ifdef CONFIG_ACPI_BOOT
extern int acpi_lapic;
extern int acpi_ioapic;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册