staging: wilc1000: added proper spacing for comments

Added proper space for the comments and added newline before the
comments inside a struct.
Signed-off-by: NAjay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20191105095058.24223-6-ajay.kathat@microchip.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wilc1000/mon.c

@@ -220,7 +220,7 @@ struct net_device *wilc_wfi_init_mon_interface(struct wilc *wl,
 {
 	struct wilc_wfi_mon_priv *priv;
 
-	/*If monitor interface is already initialized, return it*/
+	/* If monitor interface is already initialized, return it */
 	if (wl->monitor_dev)
 		return wl->monitor_dev;
 

drivers/staging/wilc1000/netdev.h

@@ -60,7 +60,7 @@ struct sta_info {
 	u8 sta_associated_bss[WILC_MAX_NUM_STA][ETH_ALEN];
 };
 
-/*Parameters needed for host interface for  remaining on channel*/
+/* Parameters needed for host interface for remaining on channel */
 struct wilc_wfi_p2p_listen_params {
 	struct ieee80211_channel *listen_ch;
 	u32 listen_duration;
@@ -145,11 +145,13 @@ struct wilc_priv {
 	struct wilc_pmkid_attr pmkid_list;
 	u8 wep_key[4][WLAN_KEY_LEN_WEP104];
 	u8 wep_key_len[4];
+
 	/* The real interface that the monitor is on */
 	struct net_device *real_ndev;
 	struct wilc_wfi_key *wilc_gtk[WILC_MAX_NUM_STA];
 	struct wilc_wfi_key *wilc_ptk[WILC_MAX_NUM_STA];
 	u8 wilc_groupkey;
+
 	/* mutexes */
 	struct mutex scan_req_lock;
 	bool p2p_listen_state;
@@ -224,16 +226,21 @@ struct wilc {
 	int close;
 	u8 vif_num;
 	struct list_head vif_list;
-	/*protect vif list*/
+
+	/* protect vif list */
 	struct mutex vif_mutex;
 	struct srcu_struct srcu;
 	u8 open_ifcs;
-	/*protect head of transmit queue*/
+
+	/* protect head of transmit queue */
 	struct mutex txq_add_to_head_cs;
-	/*protect txq_entry_t transmit queue*/
+
+	/* protect txq_entry_t transmit queue */
 	spinlock_t txq_spinlock;
-	/*protect rxq_entry_t receiver queue*/
+
+	/* protect rxq_entry_t receiver queue */
 	struct mutex rxq_cs;
+
 	/* lock to protect hif access */
 	struct mutex hif_cs;
 
@@ -245,6 +252,7 @@ struct wilc {
 	struct task_struct *txq_thread;
 
 	int quit;
+
 	/* lock to protect issue of wid command to firmware */
 	struct mutex cfg_cmd_lock;
 	struct wilc_cfg_frame cfg_frame;
@@ -271,6 +279,7 @@ struct wilc {
 	struct wilc_cfg cfg;
 	void *bus_data;
 	struct net_device *monitor_dev;
+
 	/* deinit lock */
 	struct mutex deinit_lock;
 	u8 sta_ch;

drivers/staging/wilc1000/wlan.h

@@ -190,7 +190,7 @@
 
 #define ENABLE_RX_VMM		(SEL_VMM_TBL1 | EN_VMM)
 #define ENABLE_TX_VMM		(SEL_VMM_TBL0 | EN_VMM)
-/*time for expiring the completion of cfg packets*/
+/* time for expiring the completion of cfg packets */
 #define WILC_CFG_PKTS_TIMEOUT	msecs_to_jiffies(2000)
 
 #define IS_MANAGMEMENT		0x100

drivers/staging/wilc1000/wlan_cfg.c

@@ -378,7 +378,7 @@ void wilc_wlan_cfg_indicate_rx(struct wilc *wilc, u8 *frame, int size,
 		wilc_wlan_parse_info_frame(wilc, frame);
 		rsp->type = WILC_CFG_RSP_STATUS;
 		rsp->seq_no = msg_id;
-		/*call host interface info parse as well*/
+		/* call host interface info parse as well */
 		wilc_gnrl_async_info_received(wilc, frame - 4, size + 4);
 		break;
 

drivers/staging/wilc1000/wlan_if.h

@@ -750,10 +750,10 @@ enum {
 	WID_REMOVE_KEY			= 0x301E,
 	WID_ASSOC_REQ_INFO		= 0x301F,
 	WID_ASSOC_RES_INFO		= 0x3020,
-	WID_MANUFACTURER		= 0x3026, /*Added for CAPI tool */
-	WID_MODEL_NAME			= 0x3027, /*Added for CAPI tool */
-	WID_MODEL_NUM			= 0x3028, /*Added for CAPI tool */
-	WID_DEVICE_NAME			= 0x3029, /*Added for CAPI tool */
+	WID_MANUFACTURER		= 0x3026, /* Added for CAPI tool */
+	WID_MODEL_NAME			= 0x3027, /* Added for CAPI tool */
+	WID_MODEL_NUM			= 0x3028, /* Added for CAPI tool */
+	WID_DEVICE_NAME			= 0x3029, /* Added for CAPI tool */
 
 	/* NMAC String WID list */
 	WID_SET_OPERATION_MODE		= 0x3079,