Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 009d6914 编写于 作者: J John Crispin 提交者： Ralf Baechle
浏览文件
操作

MIPS: lantiq: remove orphaned code 

Now that all drivers are converted to OF we are able to remove some remaining
pieces of orphaned code.
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3841/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 d41ced01
隐藏空白更改
内联 并排
Showing with 7 addition and 175 deletion
arch/mips/include/asm/mach-lantiq/lantiq.h
浏览文件 @ 009d6914
......@@ -27,9 +27,6 @@
ltq_w32_mask(x, y, ltq_ebu_membase + (z))
extern __iomem void *ltq_ebu_membase;
extern unsigned int ltq_get_cpu_ver(void);
extern unsigned int ltq_get_soc_type(void);
/* spinlock all ebu i/o */
extern spinlock_t ebu_lock;
......@@ -54,7 +51,5 @@ extern int ltq_reset_cause(void);
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xffffffff
#define LTQ_FLASH_START 0x10000000
#define LTQ_FLASH_MAX 0x04000000
#endif
arch/mips/include/asm/mach-lantiq/lantiq_platform.h
浏览文件 @ 009d6914
......@@ -9,41 +9,8 @@
#ifndef _LANTIQ_PLATFORM_H__
#define _LANTIQ_PLATFORM_H__
#include <linux/mtd/partitions.h>
#include <linux/socket.h>
/* struct used to pass info to the pci core */
enum {
PCI_CLOCK_INT = 0,
PCI_CLOCK_EXT
};
#define PCI_EXIN0 0x0001
#define PCI_EXIN1 0x0002
#define PCI_EXIN2 0x0004
#define PCI_EXIN3 0x0008
#define PCI_EXIN4 0x0010
#define PCI_EXIN5 0x0020
#define PCI_EXIN_MAX 6
#define PCI_GNT1 0x0040
#define PCI_GNT2 0x0080
#define PCI_GNT3 0x0100
#define PCI_GNT4 0x0200
#define PCI_REQ1 0x0400
#define PCI_REQ2 0x0800
#define PCI_REQ3 0x1000
#define PCI_REQ4 0x2000
#define PCI_REQ_SHIFT 10
#define PCI_REQ_MASK 0xf
struct ltq_pci_data {
int clock;
int gpio;
int irq[16];
};
/* struct used to pass info to network drivers */
struct ltq_eth_data {
struct sockaddr mac;
......
arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
浏览文件 @ 009d6914
......@@ -17,50 +17,8 @@
#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8))
#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1)
#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2)
#define LTQ_ASC_ASE_TIR INT_NUM_IM2_IRL0
#define LTQ_ASC_ASE_RIR (INT_NUM_IM2_IRL0 + 2)
#define LTQ_ASC_ASE_EIR (INT_NUM_IM2_IRL0 + 3)
#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
#define MIPS_CPU_TIMER_IRQ 7
#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
#define MIPS_CPU_TIMER_IRQ 7
#endif
arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
浏览文件 @ 009d6914
......@@ -44,11 +44,6 @@
#define SOC_TYPE_VR9_2 0x05 /* v1.2 */
#define SOC_TYPE_AMAZON_SE 0x06
/* ASC0/1 - serial port */
#define LTQ_ASC0_BASE_ADDR 0x1E100400
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_ASC_SIZE 0x400
/* BOOT_SEL - find what boot media we have */
#define BS_EXT_ROM 0x0
#define BS_FLASH 0x1
......@@ -68,23 +63,10 @@ extern __iomem void *ltq_cgu_membase;
* during early_printk no ioremap is possible
* lets use KSEG1 instead
*/
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
/* RCU - reset control unit */
#define LTQ_RCU_BASE_ADDR 0x1F203000
#define LTQ_RCU_SIZE 0x1000
/* GPTU - general purpose timer unit */
#define LTQ_GPTU_BASE_ADDR 0x18000300
#define LTQ_GPTU_SIZE 0x100
/* EBU - external bus unit */
#define LTQ_EBU_GPIO_START 0x14000000
#define LTQ_EBU_GPIO_SIZE 0x1000
#define LTQ_EBU_BASE_ADDR 0x1E105300
#define LTQ_EBU_SIZE 0x100
#define LTQ_EBU_BUSCON0 0x0060
#define LTQ_EBU_PCC_CON 0x0090
#define LTQ_EBU_PCC_IEN 0x00A4
......@@ -93,85 +75,17 @@ extern __iomem void *ltq_cgu_membase;
#define LTQ_EBU_ADDRSEL1 0x0024
#define EBU_WRDIS 0x80000000
/* CGU - clock generation unit */
#define LTQ_CGU_BASE_ADDR 0x1F103000
#define LTQ_CGU_SIZE 0x1000
/* ICU - interrupt control unit */
#define LTQ_ICU_BASE_ADDR 0x1F880200
#define LTQ_ICU_SIZE 0x100
/* EIU - external interrupt unit */
#define LTQ_EIU_BASE_ADDR 0x1F101000
#define LTQ_EIU_SIZE 0x1000
/* PMU - power management unit */
#define LTQ_PMU_BASE_ADDR 0x1F102000
#define LTQ_PMU_SIZE 0x1000
#define PMU_DMA 0x0020
#define PMU_USB 0x8041
#define PMU_LED 0x0800
#define PMU_GPT 0x1000
#define PMU_PPE 0x2000
#define PMU_FPI 0x4000
#define PMU_SWITCH 0x10000000
/* ETOP - ethernet */
#define LTQ_ETOP_BASE_ADDR 0x1E180000
#define LTQ_ETOP_SIZE 0x40000
/* DMA */
#define LTQ_DMA_BASE_ADDR 0x1E104100
#define LTQ_DMA_SIZE 0x800
/* PCI */
#define PCI_CR_BASE_ADDR 0x1E105400
#define PCI_CR_SIZE 0x400
/* WDT */
#define LTQ_WDT_BASE_ADDR 0x1F8803F0
#define LTQ_WDT_SIZE 0x10
#define LTQ_RST_CAUSE_WDTRST 0x20
/* STP - serial to parallel conversion unit */
#define LTQ_STP_BASE_ADDR 0x1E100BB0
#define LTQ_STP_SIZE 0x40
/* GPIO */
#define LTQ_GPIO0_BASE_ADDR 0x1E100B10
#define LTQ_GPIO1_BASE_ADDR 0x1E100B40
#define LTQ_GPIO2_BASE_ADDR 0x1E100B70
#define LTQ_GPIO_SIZE 0x30
/* SSC */
#define LTQ_SSC_BASE_ADDR 0x1e100800
#define LTQ_SSC_SIZE 0x100
/* MEI - dsl core */
#define LTQ_MEI_BASE_ADDR 0x1E116000
/* DEU - data encryption unit */
#define LTQ_DEU_BASE_ADDR 0x1E103100
/* MPS - multi processor unit (voice) */
#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
/* request a non-gpio and set the PIO config */
#define PMU_PPE BIT(13)
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
static inline int ltq_is_ar9(void)
{
return (ltq_get_soc_type() == SOC_TYPE_AR9);
}
static inline int ltq_is_vr9(void)
{
return (ltq_get_soc_type() == SOC_TYPE_VR9);
}
#endif /* CONFIG_SOC_TYPE_XWAY */
#endif /* _LTQ_XWAY_H__ */
arch/mips/lantiq/prom.c
浏览文件 @ 009d6914
......@@ -27,12 +27,6 @@ EXPORT_SYMBOL_GPL(ebu_lock);
*/
static struct ltq_soc_info soc_info;
unsigned int ltq_get_soc_type(void)
{
return soc_info.type;
}
EXPORT_SYMBOL(ltq_get_soc_type);
const char *get_system_type(void)
{
return soc_info.sys_type;
......
arch/mips/lantiq/xway/sysctrl.c
浏览文件 @ 009d6914
......@@ -42,6 +42,7 @@
/* clock gates that we can en/disable */
#define PMU_USB0_P BIT(0)
#define PMU_PCI BIT(4)
#define PMU_DMA BIT(5)
#define PMU_USB0 BIT(6)
#define PMU_ASC0 BIT(7)
#define PMU_EPHY BIT(7) /* ase */
......@@ -49,7 +50,9 @@
#define PMU_DFE BIT(9)
#define PMU_EBU BIT(10)
#define PMU_STP BIT(11)
#define PMU_GPT BIT(12)
#define PMU_AHBS BIT(13) /* vr9 */
#define PMU_FPI BIT(14)
#define PMU_AHBM BIT(15)
#define PMU_ASC1 BIT(17)
#define PMU_PPE_QSB BIT(18)
......@@ -60,6 +63,7 @@
#define PMU_PPE_DPLUS BIT(24)
#define PMU_USB1_P BIT(26)
#define PMU_USB1 BIT(27)
#define PMU_SWITCH BIT(28)
#define PMU_PPE_TOP BIT(29)
#define PMU_GPHY BIT(30)
#define PMU_PCIE_CLK BIT(31)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或