提交 00453981 编写于 作者: H Hai Li 提交者: Rob Clark

drm/msm: Add the eDP connector in msm drm driver (V2)

Modified the hard-coded hdmi connector/encoder implementations in msm drm
driver to support both edp and hdmi.

V1: Initial change

V2: Address Thierry's change
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>
上级 ab5b0107
/*
* Copyright (c) 2014, The Linux Foundation. All rights reserved.
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
......@@ -123,11 +124,13 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
{
struct mdp5_encoder *mdp5_encoder = to_mdp5_encoder(encoder);
struct mdp5_kms *mdp5_kms = get_kms(encoder);
struct drm_device *dev = encoder->dev;
struct drm_connector *connector;
int intf = mdp5_encoder->intf;
uint32_t dtv_hsync_skew, vsync_period, vsync_len, ctrl_pol;
uint32_t display_v_start, display_v_end;
uint32_t hsync_start_x, hsync_end_x;
uint32_t format;
uint32_t format = 0x2100;
unsigned long flags;
mode = adjusted_mode;
......@@ -149,7 +152,28 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
/* probably need to get DATA_EN polarity from panel.. */
dtv_hsync_skew = 0; /* get this from panel? */
format = 0x213f; /* get this from panel? */
/* Get color format from panel, default is 8bpc */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->encoder == encoder) {
switch (connector->display_info.bpc) {
case 4:
format |= 0;
break;
case 5:
format |= 0x15;
break;
case 6:
format |= 0x2A;
break;
case 8:
default:
format |= 0x3F;
break;
}
break;
}
}
hsync_start_x = (mode->htotal - mode->hsync_start);
hsync_end_x = mode->htotal - (mode->hsync_start - mode->hdisplay) - 1;
......@@ -159,6 +183,16 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
display_v_start = (mode->vtotal - mode->vsync_start) * mode->htotal + dtv_hsync_skew;
display_v_end = vsync_period - ((mode->vsync_start - mode->vdisplay) * mode->htotal) + dtv_hsync_skew - 1;
/*
* For edp only:
* DISPLAY_V_START = (VBP * HCYCLE) + HBP
* DISPLAY_V_END = (VBP + VACTIVE) * HCYCLE - 1 - HFP
*/
if (mdp5_encoder->intf_id == INTF_eDP) {
display_v_start += mode->htotal - mode->hsync_start;
display_v_end -= mode->hsync_start - mode->hdisplay;
}
spin_lock_irqsave(&mdp5_encoder->intf_lock, flags);
mdp5_write(mdp5_kms, REG_MDP5_INTF_HSYNC_CTL(intf),
......
......@@ -222,19 +222,18 @@ static int modeset_init(struct mdp5_kms *mdp5_kms)
}
}
/* Construct encoder for HDMI: */
encoder = mdp5_encoder_init(dev, 3, INTF_HDMI);
if (IS_ERR(encoder)) {
dev_err(dev->dev, "failed to construct encoder\n");
ret = PTR_ERR(encoder);
goto fail;
}
if (priv->hdmi) {
/* Construct encoder for HDMI: */
encoder = mdp5_encoder_init(dev, 3, INTF_HDMI);
if (IS_ERR(encoder)) {
dev_err(dev->dev, "failed to construct encoder\n");
ret = PTR_ERR(encoder);
goto fail;
}
encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;;
priv->encoders[priv->num_encoders++] = encoder;
encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;;
priv->encoders[priv->num_encoders++] = encoder;
/* Construct bridge/connector for HDMI: */
if (priv->hdmi) {
ret = hdmi_modeset_init(priv->hdmi, dev, encoder);
if (ret) {
dev_err(dev->dev, "failed to initialize HDMI: %d\n", ret);
......@@ -242,6 +241,27 @@ static int modeset_init(struct mdp5_kms *mdp5_kms)
}
}
if (priv->edp) {
/* Construct encoder for eDP: */
encoder = mdp5_encoder_init(dev, 0, INTF_eDP);
if (IS_ERR(encoder)) {
dev_err(dev->dev, "failed to construct eDP encoder\n");
ret = PTR_ERR(encoder);
goto fail;
}
encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
priv->encoders[priv->num_encoders++] = encoder;
/* Construct bridge/connector for eDP: */
ret = msm_edp_modeset_init(priv->edp, dev, encoder);
if (ret) {
dev_err(dev->dev, "failed to initialize eDP: %d\n",
ret);
goto fail;
}
}
return 0;
fail:
......
......@@ -1023,6 +1023,7 @@ static struct platform_driver msm_platform_driver = {
static int __init msm_drm_register(void)
{
DBG("init");
msm_edp_register();
hdmi_register();
adreno_register();
return platform_driver_register(&msm_platform_driver);
......@@ -1034,6 +1035,7 @@ static void __exit msm_drm_unregister(void)
platform_driver_unregister(&msm_platform_driver);
hdmi_unregister();
adreno_unregister();
msm_edp_unregister();
}
module_init(msm_drm_register);
......
......@@ -230,6 +230,12 @@ int hdmi_modeset_init(struct hdmi *hdmi, struct drm_device *dev,
void __init hdmi_register(void);
void __exit hdmi_unregister(void);
struct msm_edp;
void __init msm_edp_register(void);
void __exit msm_edp_unregister(void);
int msm_edp_modeset_init(struct msm_edp *edp, struct drm_device *dev,
struct drm_encoder *encoder);
#ifdef CONFIG_DEBUG_FS
void msm_gem_describe(struct drm_gem_object *obj, struct seq_file *m);
void msm_gem_describe_objects(struct list_head *list, struct seq_file *m);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册