• I
    [PATCH] lightweight robust futexes: arch defaults · e9056f13
    Ingo Molnar 提交于
    This patchset provides a new (written from scratch) implementation of robust
    futexes, called "lightweight robust futexes".  We believe this new
    implementation is faster and simpler than the vma-based robust futex solutions
    presented before, and we'd like this patchset to be adopted in the upstream
    kernel.  This is version 1 of the patchset.
    
      Background
      ----------
    
    What are robust futexes?  To answer that, we first need to understand what
    futexes are: normal futexes are special types of locks that in the
    noncontended case can be acquired/released from userspace without having to
    enter the kernel.
    
    A futex is in essence a user-space address, e.g.  a 32-bit lock variable
    field.  If userspace notices contention (the lock is already owned and someone
    else wants to grab it too) then the lock is marked with a value that says
    "there's a waiter pending", and the sys_futex(FUTEX_WAIT) syscall is used to
    wait for the other guy to release it.  The kernel creates a 'futex queue'
    internally, so that it can later on match up the waiter with the waker -
    without them having to know about each other.  When the owner thread releases
    the futex, it notices (via the variable value) that there were waiter(s)
    pending, and does the sys_futex(FUTEX_WAKE) syscall to wake them up.  Once all
    waiters have taken and released the lock, the futex is again back to
    'uncontended' state, and there's no in-kernel state associated with it.  The
    kernel completely forgets that there ever was a futex at that address.  This
    method makes futexes very lightweight and scalable.
    
    "Robustness" is about dealing with crashes while holding a lock: if a process
    exits prematurely while holding a pthread_mutex_t lock that is also shared
    with some other process (e.g.  yum segfaults while holding a pthread_mutex_t,
    or yum is kill -9-ed), then waiters for that lock need to be notified that the
    last owner of the lock exited in some irregular way.
    
    To solve such types of problems, "robust mutex" userspace APIs were created:
    pthread_mutex_lock() returns an error value if the owner exits prematurely -
    and the new owner can decide whether the data protected by the lock can be
    recovered safely.
    
    There is a big conceptual problem with futex based mutexes though: it is the
    kernel that destroys the owner task (e.g.  due to a SEGFAULT), but the kernel
    cannot help with the cleanup: if there is no 'futex queue' (and in most cases
    there is none, futexes being fast lightweight locks) then the kernel has no
    information to clean up after the held lock!  Userspace has no chance to clean
    up after the lock either - userspace is the one that crashes, so it has no
    opportunity to clean up.  Catch-22.
    
    In practice, when e.g.  yum is kill -9-ed (or segfaults), a system reboot is
    needed to release that futex based lock.  This is one of the leading
    bugreports against yum.
    
    To solve this problem, 'Robust Futex' patches were created and presented on
    lkml: the one written by Todd Kneisel and David Singleton is the most advanced
    at the moment.  These patches all tried to extend the futex abstraction by
    registering futex-based locks in the kernel - and thus give the kernel a
    chance to clean up.
    
    E.g.  in David Singleton's robust-futex-6.patch, there are 3 new syscall
    variants to sys_futex(): FUTEX_REGISTER, FUTEX_DEREGISTER and FUTEX_RECOVER.
    The kernel attaches such robust futexes to vmas (via
    vma->vm_file->f_mapping->robust_head), and at do_exit() time, all vmas are
    searched to see whether they have a robust_head set.
    
    Lots of work went into the vma-based robust-futex patch, and recently it has
    improved significantly, but unfortunately it still has two fundamental
    problems left:
    
     - they have quite complex locking and race scenarios.  The vma-based
       patches had been pending for years, but they are still not completely
       reliable.
    
     - they have to scan _every_ vma at sys_exit() time, per thread!
    
    The second disadvantage is a real killer: pthread_exit() takes around 1
    microsecond on Linux, but with thousands (or tens of thousands) of vmas every
    pthread_exit() takes a millisecond or more, also totally destroying the CPU's
    L1 and L2 caches!
    
    This is very much noticeable even for normal process sys_exit_group() calls:
    the kernel has to do the vma scanning unconditionally!  (this is because the
    kernel has no knowledge about how many robust futexes there are to be cleaned
    up, because a robust futex might have been registered in another task, and the
    futex variable might have been simply mmap()-ed into this process's address
    space).
    
    This huge overhead forced the creation of CONFIG_FUTEX_ROBUST, but worse than
    that: the overhead makes robust futexes impractical for any type of generic
    Linux distribution.
    
    So it became clear to us, something had to be done.  Last week, when Thomas
    Gleixner tried to fix up the vma-based robust futex patch in the -rt tree, he
    found a handful of new races and we were talking about it and were analyzing
    the situation.  At that point a fundamentally different solution occured to
    me.  This patchset (written in the past couple of days) implements that new
    solution.  Be warned though - the patchset does things we normally dont do in
    Linux, so some might find the approach disturbing.  Parental advice
    recommended ;-)
    
      New approach to robust futexes
      ------------------------------
    
    At the heart of this new approach there is a per-thread private list of robust
    locks that userspace is holding (maintained by glibc) - which userspace list
    is registered with the kernel via a new syscall [this registration happens at
    most once per thread lifetime].  At do_exit() time, the kernel checks this
    user-space list: are there any robust futex locks to be cleaned up?
    
    In the common case, at do_exit() time, there is no list registered, so the
    cost of robust futexes is just a simple current->robust_list != NULL
    comparison.  If the thread has registered a list, then normally the list is
    empty.  If the thread/process crashed or terminated in some incorrect way then
    the list might be non-empty: in this case the kernel carefully walks the list
    [not trusting it], and marks all locks that are owned by this thread with the
    FUTEX_OWNER_DEAD bit, and wakes up one waiter (if any).
    
    The list is guaranteed to be private and per-thread, so it's lockless.  There
    is one race possible though: since adding to and removing from the list is
    done after the futex is acquired by glibc, there is a few instructions window
    for the thread (or process) to die there, leaving the futex hung.  To protect
    against this possibility, userspace (glibc) also maintains a simple per-thread
    'list_op_pending' field, to allow the kernel to clean up if the thread dies
    after acquiring the lock, but just before it could have added itself to the
    list.  Glibc sets this list_op_pending field before it tries to acquire the
    futex, and clears it after the list-add (or list-remove) has finished.
    
    That's all that is needed - all the rest of robust-futex cleanup is done in
    userspace [just like with the previous patches].
    
    Ulrich Drepper has implemented the necessary glibc support for this new
    mechanism, which fully enables robust mutexes.  (Ulrich plans to commit these
    changes to glibc-HEAD later today.)
    
    Key differences of this userspace-list based approach, compared to the vma
    based method:
    
     - it's much, much faster: at thread exit time, there's no need to loop
       over every vma (!), which the VM-based method has to do.  Only a very
       simple 'is the list empty' op is done.
    
     - no VM changes are needed - 'struct address_space' is left alone.
    
     - no registration of individual locks is needed: robust mutexes dont need
       any extra per-lock syscalls.  Robust mutexes thus become a very lightweight
       primitive - so they dont force the application designer to do a hard choice
       between performance and robustness - robust mutexes are just as fast.
    
     - no per-lock kernel allocation happens.
    
     - no resource limits are needed.
    
     - no kernel-space recovery call (FUTEX_RECOVER) is needed.
    
     - the implementation and the locking is "obvious", and there are no
       interactions with the VM.
    
      Performance
      -----------
    
    I have benchmarked the time needed for the kernel to process a list of 1
    million (!) held locks, using the new method [on a 2GHz CPU]:
    
     - with FUTEX_WAIT set [contended mutex]: 130 msecs
     - without FUTEX_WAIT set [uncontended mutex]: 30 msecs
    
    I have also measured an approach where glibc does the lock notification [which
    it currently does for !pshared robust mutexes], and that took 256 msecs -
    clearly slower, due to the 1 million FUTEX_WAKE syscalls userspace had to do.
    
    (1 million held locks are unheard of - we expect at most a handful of locks to
    be held at a time.  Nevertheless it's nice to know that this approach scales
    nicely.)
    
      Implementation details
      ----------------------
    
    The patch adds two new syscalls: one to register the userspace list, and one
    to query the registered list pointer:
    
     asmlinkage long
     sys_set_robust_list(struct robust_list_head __user *head,
                         size_t len);
    
     asmlinkage long
     sys_get_robust_list(int pid, struct robust_list_head __user **head_ptr,
                         size_t __user *len_ptr);
    
    List registration is very fast: the pointer is simply stored in
    current->robust_list.  [Note that in the future, if robust futexes become
    widespread, we could extend sys_clone() to register a robust-list head for new
    threads, without the need of another syscall.]
    
    So there is virtually zero overhead for tasks not using robust futexes, and
    even for robust futex users, there is only one extra syscall per thread
    lifetime, and the cleanup operation, if it happens, is fast and
    straightforward.  The kernel doesnt have any internal distinction between
    robust and normal futexes.
    
    If a futex is found to be held at exit time, the kernel sets the highest bit
    of the futex word:
    
    	#define FUTEX_OWNER_DIED        0x40000000
    
    and wakes up the next futex waiter (if any). User-space does the rest of
    the cleanup.
    
    Otherwise, robust futexes are acquired by glibc by putting the TID into the
    futex field atomically.  Waiters set the FUTEX_WAITERS bit:
    
    	#define FUTEX_WAITERS           0x80000000
    
    and the remaining bits are for the TID.
    
      Testing, architecture support
      -----------------------------
    
    I've tested the new syscalls on x86 and x86_64, and have made sure the parsing
    of the userspace list is robust [ ;-) ] even if the list is deliberately
    corrupted.
    
    i386 and x86_64 syscalls are wired up at the moment, and Ulrich has tested the
    new glibc code (on x86_64 and i386), and it works for his robust-mutex
    testcases.
    
    All other architectures should build just fine too - but they wont have the
    new syscalls yet.
    
    Architectures need to implement the new futex_atomic_cmpxchg_inuser() inline
    function before writing up the syscalls (that function returns -ENOSYS right
    now).
    
    This patch:
    
    Add placeholder futex_atomic_cmpxchg_inuser() implementations to every
    architecture that supports futexes.  It returns -ENOSYS.
    Signed-off-by: NIngo Molnar <mingo@elte.hu>
    Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
    Signed-off-by: NArjan van de Ven <arjan@infradead.org>
    Acked-by: NUlrich Drepper <drepper@redhat.com>
    Signed-off-by: NAndrew Morton <akpm@osdl.org>
    Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
    e9056f13
futex.h 2.2 KB