stable inclusion
from stable-v5.10.134
commit f3da643d87636b2605190b292f7c5ea7222707fd
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZVR7

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f3da643d87636b2605190b292f7c5ea7222707fd

--------------------------------

[ Upstream commit 4ca8ca87 ]

Problems were observed on the Xilinx ZynqMP platform with large I2C reads.
When a read of 277 bytes was performed, the controller NAKed the transfer
after only 252 bytes were transferred and returned an ENXIO error on the
transfer.

There is some code in cdns_i2c_master_isr to handle this case by resetting
the transfer count in the controller before it reaches 0, to allow larger
transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT
quirk being set on the controller, and ZynqMP uses the r1p14 version of
the core where this quirk is not being set. The requirement to do this to
support larger reads seems like an inherently required workaround due to
the core only having an 8-bit transfer size register, so it does not
appear that this should be conditional on the broken HOLD bit quirk which
is used elsewhere in the driver.

Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer
size reset logic to fix this problem.

Fixes: 63cab195 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC")
Signed-off-by: NRobert Hancock <robert.hancock@calian.com>
Reviewed-by: NShubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Acked-by: NMichal Simek <michal.simek@amd.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>