• P
    block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler · aee69d78
    Paolo Valente 提交于
    We tag as v0 the version of BFQ containing only BFQ's engine plus
    hierarchical support. BFQ's engine is introduced by this commit, while
    hierarchical support is added by next commit. We use the v0 tag to
    distinguish this minimal version of BFQ from the versions containing
    also the features and the improvements added by next commits. BFQ-v0
    coincides with the version of BFQ submitted a few years ago [1], apart
    from the introduction of preemption, described below.
    
    BFQ is a proportional-share I/O scheduler, whose general structure,
    plus a lot of code, are borrowed from CFQ.
    
    - Each process doing I/O on a device is associated with a weight and a
      (bfq_)queue.
    
    - BFQ grants exclusive access to the device, for a while, to one queue
      (process) at a time, and implements this service model by
      associating every queue with a budget, measured in number of
      sectors.
    
      - After a queue is granted access to the device, the budget of the
        queue is decremented, on each request dispatch, by the size of the
        request.
    
      - The in-service queue is expired, i.e., its service is suspended,
        only if one of the following events occurs: 1) the queue finishes
        its budget, 2) the queue empties, 3) a "budget timeout" fires.
    
        - The budget timeout prevents processes doing random I/O from
          holding the device for too long and dramatically reducing
          throughput.
    
        - Actually, as in CFQ, a queue associated with a process issuing
          sync requests may not be expired immediately when it empties. In
          contrast, BFQ may idle the device for a short time interval,
          giving the process the chance to go on being served if it issues
          a new request in time. Device idling typically boosts the
          throughput on rotational devices, if processes do synchronous
          and sequential I/O. In addition, under BFQ, device idling is
          also instrumental in guaranteeing the desired throughput
          fraction to processes issuing sync requests (see [2] for
          details).
    
          - With respect to idling for service guarantees, if several
            processes are competing for the device at the same time, but
            all processes (and groups, after the following commit) have
            the same weight, then BFQ guarantees the expected throughput
            distribution without ever idling the device. Throughput is
            thus as high as possible in this common scenario.
    
      - Queues are scheduled according to a variant of WF2Q+, named
        B-WF2Q+, and implemented using an augmented rb-tree to preserve an
        O(log N) overall complexity.  See [2] for more details. B-WF2Q+ is
        also ready for hierarchical scheduling. However, for a cleaner
        logical breakdown, the code that enables and completes
        hierarchical support is provided in the next commit, which focuses
        exactly on this feature.
    
      - B-WF2Q+ guarantees a tight deviation with respect to an ideal,
        perfectly fair, and smooth service. In particular, B-WF2Q+
        guarantees that each queue receives a fraction of the device
        throughput proportional to its weight, even if the throughput
        fluctuates, and regardless of: the device parameters, the current
        workload and the budgets assigned to the queue.
    
      - The last, budget-independence, property (although probably
        counterintuitive in the first place) is definitely beneficial, for
        the following reasons:
    
        - First, with any proportional-share scheduler, the maximum
          deviation with respect to an ideal service is proportional to
          the maximum budget (slice) assigned to queues. As a consequence,
          BFQ can keep this deviation tight not only because of the
          accurate service of B-WF2Q+, but also because BFQ *does not*
          need to assign a larger budget to a queue to let the queue
          receive a higher fraction of the device throughput.
    
        - Second, BFQ is free to choose, for every process (queue), the
          budget that best fits the needs of the process, or best
          leverages the I/O pattern of the process. In particular, BFQ
          updates queue budgets with a simple feedback-loop algorithm that
          allows a high throughput to be achieved, while still providing
          tight latency guarantees to time-sensitive applications. When
          the in-service queue expires, this algorithm computes the next
          budget of the queue so as to:
    
          - Let large budgets be eventually assigned to the queues
            associated with I/O-bound applications performing sequential
            I/O: in fact, the longer these applications are served once
            got access to the device, the higher the throughput is.
    
          - Let small budgets be eventually assigned to the queues
            associated with time-sensitive applications (which typically
            perform sporadic and short I/O), because, the smaller the
            budget assigned to a queue waiting for service is, the sooner
            B-WF2Q+ will serve that queue (Subsec 3.3 in [2]).
    
    - Weights can be assigned to processes only indirectly, through I/O
      priorities, and according to the relation:
      weight = 10 * (IOPRIO_BE_NR - ioprio).
      The next patch provides, instead, a cgroups interface through which
      weights can be assigned explicitly.
    
    - If several processes are competing for the device at the same time,
      but all processes and groups have the same weight, then BFQ
      guarantees the expected throughput distribution without ever idling
      the device. It uses preemption instead. Throughput is then much
      higher in this common scenario.
    
    - ioprio classes are served in strict priority order, i.e.,
      lower-priority queues are not served as long as there are
      higher-priority queues.  Among queues in the same class, the
      bandwidth is distributed in proportion to the weight of each
      queue. A very thin extra bandwidth is however guaranteed to the Idle
      class, to prevent it from starving.
    
    - If the strict_guarantees parameter is set (default: unset), then BFQ
         - always performs idling when the in-service queue becomes empty;
         - forces the device to serve one I/O request at a time, by
           dispatching a new request only if there is no outstanding
           request.
      In the presence of differentiated weights or I/O-request sizes,
      both the above conditions are needed to guarantee that every
      queue receives its allotted share of the bandwidth (see
      Documentation/block/bfq-iosched.txt for more details). Setting
      strict_guarantees may evidently affect throughput.
    
    [1] https://lkml.org/lkml/2008/4/1/234
        https://lkml.org/lkml/2008/11/11/148
    
    [2] P. Valente and M. Andreolini, "Improving Application
        Responsiveness with the BFQ Disk I/O Scheduler", Proceedings of
        the 5th Annual International Systems and Storage Conference
        (SYSTOR '12), June 2012.
        Slightly extended version:
        http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
    							results.pdf
    Signed-off-by: NFabio Checconi <fchecconi@gmail.com>
    Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
    Signed-off-by: NArianna Avanzini <avanzini.arianna@gmail.com>
    Signed-off-by: NJens Axboe <axboe@fb.com>
    aee69d78
00-INDEX 983 字节