hulk inclusion
category: bugfix
bugzilla: NA
CVE: NA

------------------------------------

When I do some aer-inject and sysfs remove stress tests, I got the
following use-after-free Calltrace:

 ==================================================================
 BUG: KASAN: use-after-free in pci_stop_bus_device+0x174/0x178
 Read of size 8 at addr fffffc3e2e402218 by task bash/26311

 CPU: 38 PID: 26311 Comm: bash Tainted: G        W         4.19.105+ #82
 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B161.01 06/10/2021
 Call trace:
  dump_backtrace+0x0/0x360
  show_stack+0x24/0x30
  dump_stack+0x130/0x164
  print_address_description+0x68/0x278
  kasan_report+0x204/0x330
  __asan_report_load8_noabort+0x30/0x40
  pci_stop_bus_device+0x174/0x178
  pci_stop_and_remove_bus_device_locked+0x24/0x40
  remove_store+0x1c8/0x1e0
  dev_attr_store+0x60/0x80
  sysfs_kf_write+0x104/0x170
  kernfs_fop_write+0x23c/0x430
  __vfs_write+0xec/0x4e0
  vfs_write+0x12c/0x3d0
  ksys_write+0xe8/0x208
  __arm64_sys_write+0x70/0xa0
  el0_svc_common+0x10c/0x450
  el0_svc_handler+0x50/0xc0
  el0_svc+0x10/0x14

 Allocated by task 684:
  kasan_kmalloc+0xe0/0x190
  kmem_cache_alloc_trace+0x110/0x240
  pci_alloc_dev+0x4c/0x110
  pci_scan_single_device+0x100/0x218
  pci_scan_slot+0x8c/0x2d8
  pci_scan_child_bus_extend+0x90/0x628
  pci_scan_child_bus+0x24/0x30
  pci_scan_bridge_extend+0x3b8/0xb28
  pci_scan_child_bus_extend+0x350/0x628
  pci_rescan_bus+0x24/0x48
  pcie_do_fatal_recovery+0x390/0x4b0
  handle_error_source+0x124/0x158
  aer_isr+0x5a0/0x800
  process_one_work+0x598/0x1250
  worker_thread+0x384/0xf08
  kthread+0x2a4/0x320
  ret_from_fork+0x10/0x18

 Freed by task 685:
  __kasan_slab_free+0x120/0x228
  kasan_slab_free+0x10/0x18
  kfree+0x88/0x218
  pci_release_dev+0xb4/0xd8
  device_release+0x6c/0x1c0
  kobject_put+0x12c/0x400
  put_device+0x24/0x30
  pci_dev_put+0x24/0x30
  handle_error_source+0x12c/0x158
  aer_isr+0x5a0/0x800
  process_one_work+0x598/0x1250
  worker_thread+0x384/0xf08
  kthread+0x2a4/0x320
  ret_from_fork+0x10/0x18

 The buggy address belongs to the object at fffffc3e2e402200
  which belongs to the cache kmalloc-4096 of size 4096
 The buggy address is located 24 bytes inside of
  4096-byte region [fffffc3e2e402200, fffffc3e2e403200)
 The buggy address belongs to the page:
 page:ffff7ff0f8b90000 count:1 mapcount:0 mapping:ffffdc365f016e00 index:0x0 compound_mapcount: 0
 flags: 0x6ffffe0000008100(slab|head)
 raw: 6ffffe0000008100 ffff7f70d83aae00 0000000300000003 ffffdc365f016e00
 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  fffffc3e2e402100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  fffffc3e2e402180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >fffffc3e2e402200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                             ^
  fffffc3e2e402280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  fffffc3e2e402300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

It is caused by the following race condition:

	CPU0					CPU1
remove_store()				aer_isr()
 device_remove_file_self()		 handle_error_source()
 pci_stop_and_remove_bus_device_locked	  pcie_do_fatal_recovery()
  (blocked)				   pci_lock_rescan_remove()	#CPU1 acquire the lock
					   pci_stop_and_remove_bus_device()
					   pci_unlock_rescan_remove()   #CPU1 release the lock
  pci_lock_rescan_remove()						#CPU0 acquire the lock
					  pci_dev_put()			#free pci_dev
  pci_stop_and_remove_bus_device()
   pci_stop_bus_device()						#use-after-free
  pci_unlock_rescan_remove()

An AER interrupt is triggered on CPU1. CPU1 starts to process it. A work
'aer_isr()' is scheduled on CPU1. It calling into
pcie_do_fatal_recovery(), and aquire lock 'pci_rescan_remove_lock'.
Before it removes the sysfs corresponding to the error pci device, a
sysfs remove operation is executed on CPU0. CPU0 use
device_remove_file_self() to remove the sysfs directory and wait for the
lock to be released. After CPU1 finish pci_stop_and_remove_bus_device(),
it release the lock and free the 'pci_dev' in pci_dev_put(). CPU0 acquire
the lock and access the 'pci_dev'. Then a use-after-free is triggered.

To fix this issue, we increase the reference count in remove_store()
before remove the device and decrease the reference count in the end.
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: NHanjun Guo <guohanjun@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>