tlan.c 84.6 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
/*******************************************************************************
 *
 *  Linux ThunderLAN Driver
 *
 *  tlan.c
 *  by James Banks
 *
 *  (C) 1997-1998 Caldera, Inc.
 *  (C) 1998 James Banks
 *  (C) 1999-2001 Torben Mathiasen
 *  (C) 2002 Samuel Chessman
 *
 *  This software may be used and distributed according to the terms
 *  of the GNU General Public License, incorporated herein by reference.
 *
 ** Useful (if not required) reading:
 *
 *		Texas Instruments, ThunderLAN Programmer's Guide,
 *			TI Literature Number SPWU013A
 *			available in PDF format from www.ti.com
 *		Level One, LXT901 and LXT970 Data Sheets
 *			available in PDF format from www.level1.com
 *		National Semiconductor, DP83840A Data Sheet
 *			available in PDF format from www.national.com
 *		Microchip Technology, 24C01A/02A/04A Data Sheet
 *			available in PDF format from www.microchip.com
 *
28
 ******************************************************************************/
L
Linus Torvalds 已提交
29

30 31
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

32
#include <linux/hardirq.h>
L
Linus Torvalds 已提交
33 34
#include <linux/module.h>
#include <linux/init.h>
35
#include <linux/interrupt.h>
L
Linus Torvalds 已提交
36 37 38
#include <linux/ioport.h>
#include <linux/eisa.h>
#include <linux/pci.h>
39
#include <linux/dma-mapping.h>
L
Linus Torvalds 已提交
40 41 42 43 44 45 46 47 48 49 50
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/mii.h>

#include "tlan.h"


/* For removing EISA devices */
51
static	struct net_device	*tlan_eisa_devices;
L
Linus Torvalds 已提交
52

53
static	int		tlan_devices_installed;
L
Linus Torvalds 已提交
54 55 56 57 58 59

/* Set speed, duplex and aui settings */
static  int aui[MAX_TLAN_BOARDS];
static  int duplex[MAX_TLAN_BOARDS];
static  int speed[MAX_TLAN_BOARDS];
static  int boards_found;
60 61 62 63
module_param_array(aui, int, NULL, 0);
module_param_array(duplex, int, NULL, 0);
module_param_array(speed, int, NULL, 0);
MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
64 65
MODULE_PARM_DESC(duplex,
		 "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
66
MODULE_PARM_DESC(speed, "ThunderLAN port speed setting(s) (0,10,100)");
L
Linus Torvalds 已提交
67 68 69 70 71 72 73 74 75 76 77

MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
MODULE_LICENSE("GPL");


/* Define this to enable Link beat monitoring */
#undef MONITOR

/* Turn on debugging. See Documentation/networking/tlan.txt for details */
static  int		debug;
78 79
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
L
Linus Torvalds 已提交
80

81
static	const char tlan_signature[] = "TLAN";
S
Sakari Ailus 已提交
82
static  const char tlan_banner[] = "ThunderLAN driver v1.17\n";
L
Linus Torvalds 已提交
83 84 85
static  int tlan_have_pci;
static  int tlan_have_eisa;

86 87 88
static const char * const media[] = {
	"10BaseT-HD", "10BaseT-FD", "100baseTx-HD",
	"100BaseTx-FD", "100BaseT4", NULL
L
Linus Torvalds 已提交
89 90 91
};

static struct board {
92 93 94
	const char	*device_label;
	u32		flags;
	u16		addr_ofs;
L
Linus Torvalds 已提交
95 96
} board_info[] = {
	{ "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
97 98
	{ "Compaq Netelligent 10/100 TX PCI UTP",
	  TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
L
Linus Torvalds 已提交
99
	{ "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
S
Stephen Hemminger 已提交
100 101
	{ "Compaq NetFlex-3/P",
	  TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
L
Linus Torvalds 已提交
102
	{ "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
S
Stephen Hemminger 已提交
103 104
	{ "Compaq Netelligent Integrated 10/100 TX UTP",
	  TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
105 106 107 108
	{ "Compaq Netelligent Dual 10/100 TX PCI UTP",
	  TLAN_ADAPTER_NONE, 0x83 },
	{ "Compaq Netelligent 10/100 TX Embedded UTP",
	  TLAN_ADAPTER_NONE, 0x83 },
L
Linus Torvalds 已提交
109
	{ "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
110 111
	{ "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 },
	{ "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xf8 },
L
Linus Torvalds 已提交
112
	{ "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
113
	{ "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 },
S
Stephen Hemminger 已提交
114
	{ "Compaq NetFlex-3/E",
115
	  TLAN_ADAPTER_ACTIVITY_LED |	/* EISA card */
S
Stephen Hemminger 已提交
116
	  TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
117 118
	{ "Compaq NetFlex-3/E",
	  TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
L
Linus Torvalds 已提交
119 120
};

121
static DEFINE_PCI_DEVICE_TABLE(tlan_pci_tbl) = {
L
Linus Torvalds 已提交
122
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
123
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
L
Linus Torvalds 已提交
124
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
125
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
L
Linus Torvalds 已提交
126
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
127
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
L
Linus Torvalds 已提交
128
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
129
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
L
Linus Torvalds 已提交
130
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
131
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
L
Linus Torvalds 已提交
132
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
133
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
L
Linus Torvalds 已提交
134
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
135
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
L
Linus Torvalds 已提交
136
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
137
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
L
Linus Torvalds 已提交
138
	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
139
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
L
Linus Torvalds 已提交
140
	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
141
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
L
Linus Torvalds 已提交
142
	{ PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
143
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
L
Linus Torvalds 已提交
144
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
145
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
L
Linus Torvalds 已提交
146
	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
147
	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
L
Linus Torvalds 已提交
148 149
	{ 0,}
};
150
MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
L
Linus Torvalds 已提交
151

152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
static void	tlan_eisa_probe(void);
static void	tlan_eisa_cleanup(void);
static int      tlan_init(struct net_device *);
static int	tlan_open(struct net_device *dev);
static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *);
static irqreturn_t tlan_handle_interrupt(int, void *);
static int	tlan_close(struct net_device *);
static struct	net_device_stats *tlan_get_stats(struct net_device *);
static void	tlan_set_multicast_list(struct net_device *);
static int	tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int      tlan_probe1(struct pci_dev *pdev, long ioaddr,
			    int irq, int rev, const struct pci_device_id *ent);
static void	tlan_tx_timeout(struct net_device *dev);
static void	tlan_tx_timeout_work(struct work_struct *work);
static int	tlan_init_one(struct pci_dev *pdev,
			      const struct pci_device_id *ent);

static u32	tlan_handle_tx_eof(struct net_device *, u16);
static u32	tlan_handle_stat_overflow(struct net_device *, u16);
static u32	tlan_handle_rx_eof(struct net_device *, u16);
static u32	tlan_handle_dummy(struct net_device *, u16);
static u32	tlan_handle_tx_eoc(struct net_device *, u16);
static u32	tlan_handle_status_check(struct net_device *, u16);
static u32	tlan_handle_rx_eoc(struct net_device *, u16);

static void	tlan_timer(unsigned long);

static void	tlan_reset_lists(struct net_device *);
static void	tlan_free_lists(struct net_device *);
static void	tlan_print_dio(u16);
static void	tlan_print_list(struct tlan_list *, char *, int);
static void	tlan_read_and_clear_stats(struct net_device *, int);
static void	tlan_reset_adapter(struct net_device *);
static void	tlan_finish_reset(struct net_device *);
static void	tlan_set_mac(struct net_device *, int areg, char *mac);

static void	tlan_phy_print(struct net_device *);
static void	tlan_phy_detect(struct net_device *);
static void	tlan_phy_power_down(struct net_device *);
static void	tlan_phy_power_up(struct net_device *);
static void	tlan_phy_reset(struct net_device *);
static void	tlan_phy_start_link(struct net_device *);
static void	tlan_phy_finish_auto_neg(struct net_device *);
L
Linus Torvalds 已提交
195
#ifdef MONITOR
196
static void     tlan_phy_monitor(struct net_device *);
L
Linus Torvalds 已提交
197 198 199
#endif

/*
200 201 202 203
  static int	tlan_phy_nop(struct net_device *);
  static int	tlan_phy_internal_check(struct net_device *);
  static int	tlan_phy_internal_service(struct net_device *);
  static int	tlan_phy_dp83840a_check(struct net_device *);
L
Linus Torvalds 已提交
204 205
*/

206 207 208 209
static bool	tlan_mii_read_reg(struct net_device *, u16, u16, u16 *);
static void	tlan_mii_send_data(u16, u32, unsigned);
static void	tlan_mii_sync(u16);
static void	tlan_mii_write_reg(struct net_device *, u16, u16, u16);
L
Linus Torvalds 已提交
210

211 212 213 214
static void	tlan_ee_send_start(u16);
static int	tlan_ee_send_byte(u16, u8, int);
static void	tlan_ee_receive_byte(u16, u8 *, int);
static int	tlan_ee_read_byte(struct net_device *, u8, u8 *);
L
Linus Torvalds 已提交
215 216


S
Stephen Hemminger 已提交
217
static inline void
218
tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb)
L
Linus Torvalds 已提交
219 220
{
	unsigned long addr = (unsigned long)skb;
S
Stephen Hemminger 已提交
221 222
	tag->buffer[9].address = addr;
	tag->buffer[8].address = upper_32_bits(addr);
L
Linus Torvalds 已提交
223 224
}

S
Stephen Hemminger 已提交
225
static inline struct sk_buff *
226
tlan_get_skb(const struct tlan_list *tag)
L
Linus Torvalds 已提交
227
{
S
Stephen Hemminger 已提交
228 229
	unsigned long addr;

230
	addr = tag->buffer[9].address;
231
	addr |= ((unsigned long) tag->buffer[8].address << 16) << 16;
L
Linus Torvalds 已提交
232 233 234
	return (struct sk_buff *) addr;
}

235 236
static u32
(*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = {
237
	NULL,
238 239 240 241 242 243 244
	tlan_handle_tx_eof,
	tlan_handle_stat_overflow,
	tlan_handle_rx_eof,
	tlan_handle_dummy,
	tlan_handle_tx_eoc,
	tlan_handle_status_check,
	tlan_handle_rx_eoc
L
Linus Torvalds 已提交
245 246 247
};

static inline void
248
tlan_set_timer(struct net_device *dev, u32 ticks, u32 type)
L
Linus Torvalds 已提交
249
{
250
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
251
	unsigned long flags = 0;
252

L
Linus Torvalds 已提交
253 254
	if (!in_irq())
		spin_lock_irqsave(&priv->lock, flags);
255 256
	if (priv->timer.function != NULL &&
	    priv->timer_type != TLAN_TIMER_ACTIVITY) {
L
Linus Torvalds 已提交
257 258 259 260
		if (!in_irq())
			spin_unlock_irqrestore(&priv->lock, flags);
		return;
	}
261
	priv->timer.function = tlan_timer;
L
Linus Torvalds 已提交
262 263 264 265
	if (!in_irq())
		spin_unlock_irqrestore(&priv->lock, flags);

	priv->timer.data = (unsigned long) dev;
266 267
	priv->timer_set_at = jiffies;
	priv->timer_type = type;
L
Linus Torvalds 已提交
268
	mod_timer(&priv->timer, jiffies + ticks);
269

270
}
L
Linus Torvalds 已提交
271 272 273 274 275


/*****************************************************************************
******************************************************************************

276
ThunderLAN driver primary functions
L
Linus Torvalds 已提交
277

278
these functions are more or less common to all linux network drivers.
L
Linus Torvalds 已提交
279 280 281 282 283 284 285 286

******************************************************************************
*****************************************************************************/





287 288 289 290 291 292 293 294 295 296 297 298 299 300
/***************************************************************
 *	tlan_remove_one
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		None
 *
 *	Goes through the TLanDevices list and frees the device
 *	structs and memory associated with each device (lists
 *	and buffers).  It also ureserves the IO port regions
 *	associated with this device.
 *
 **************************************************************/
L
Linus Torvalds 已提交
301 302


303
static void __devexit tlan_remove_one(struct pci_dev *pdev)
L
Linus Torvalds 已提交
304
{
305 306
	struct net_device *dev = pci_get_drvdata(pdev);
	struct tlan_priv	*priv = netdev_priv(dev);
307

308
	unregister_netdev(dev);
L
Linus Torvalds 已提交
309

310 311 312 313
	if (priv->dma_storage) {
		pci_free_consistent(priv->pci_dev,
				    priv->dma_size, priv->dma_storage,
				    priv->dma_storage_dma);
L
Linus Torvalds 已提交
314 315 316 317 318
	}

#ifdef CONFIG_PCI
	pci_release_regions(pdev);
#endif
319

320
	free_netdev(dev);
321

322
	pci_set_drvdata(pdev, NULL);
323
}
L
Linus Torvalds 已提交
324

S
Sakari Ailus 已提交
325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390
static void tlan_start(struct net_device *dev)
{
	tlan_reset_lists(dev);
	/* NOTE: It might not be necessary to read the stats before a
	   reset if you don't care what the values are.
	*/
	tlan_read_and_clear_stats(dev, TLAN_IGNORE);
	tlan_reset_adapter(dev);
	netif_wake_queue(dev);
}

static void tlan_stop(struct net_device *dev)
{
	struct tlan_priv *priv = netdev_priv(dev);

	tlan_read_and_clear_stats(dev, TLAN_RECORD);
	outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
	/* Reset and power down phy */
	tlan_reset_adapter(dev);
	if (priv->timer.function != NULL) {
		del_timer_sync(&priv->timer);
		priv->timer.function = NULL;
	}
}

#ifdef CONFIG_PM

static int tlan_suspend(struct pci_dev *pdev, pm_message_t state)
{
	struct net_device *dev = pci_get_drvdata(pdev);

	if (netif_running(dev))
		tlan_stop(dev);

	netif_device_detach(dev);
	pci_save_state(pdev);
	pci_disable_device(pdev);
	pci_wake_from_d3(pdev, false);
	pci_set_power_state(pdev, PCI_D3hot);

	return 0;
}

static int tlan_resume(struct pci_dev *pdev)
{
	struct net_device *dev = pci_get_drvdata(pdev);

	pci_set_power_state(pdev, PCI_D0);
	pci_restore_state(pdev);
	pci_enable_wake(pdev, 0, 0);
	netif_device_attach(dev);

	if (netif_running(dev))
		tlan_start(dev);

	return 0;
}

#else /* CONFIG_PM */

#define tlan_suspend   NULL
#define tlan_resume    NULL

#endif /* CONFIG_PM */


L
Linus Torvalds 已提交
391 392 393 394
static struct pci_driver tlan_driver = {
	.name		= "tlan",
	.id_table	= tlan_pci_tbl,
	.probe		= tlan_init_one,
395
	.remove		= __devexit_p(tlan_remove_one),
S
Sakari Ailus 已提交
396 397
	.suspend	= tlan_suspend,
	.resume		= tlan_resume,
L
Linus Torvalds 已提交
398 399 400 401
};

static int __init tlan_probe(void)
{
402
	int rc = -ENODEV;
403

404
	pr_info("%s", tlan_banner);
405

L
Linus Torvalds 已提交
406
	TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
407

L
Linus Torvalds 已提交
408 409
	/* Use new style PCI probing. Now the kernel will
	   do most of this for us */
410 411 412
	rc = pci_register_driver(&tlan_driver);

	if (rc != 0) {
413
		pr_err("Could not register pci driver\n");
414 415
		goto err_out_pci_free;
	}
L
Linus Torvalds 已提交
416 417

	TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
418
	tlan_eisa_probe();
419

420 421 422
	pr_info("%d device%s installed, PCI: %d  EISA: %d\n",
		tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s",
		tlan_have_pci, tlan_have_eisa);
L
Linus Torvalds 已提交
423

424
	if (tlan_devices_installed == 0) {
425 426
		rc = -ENODEV;
		goto  err_out_pci_unreg;
L
Linus Torvalds 已提交
427 428
	}
	return 0;
429 430 431 432 433

err_out_pci_unreg:
	pci_unregister_driver(&tlan_driver);
err_out_pci_free:
	return rc;
L
Linus Torvalds 已提交
434
}
435

L
Linus Torvalds 已提交
436

437 438
static int __devinit tlan_init_one(struct pci_dev *pdev,
				   const struct pci_device_id *ent)
L
Linus Torvalds 已提交
439
{
440
	return tlan_probe1(pdev, -1, -1, 0, ent);
L
Linus Torvalds 已提交
441 442 443 444
}


/*
445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463
***************************************************************
*	tlan_probe1
*
*	Returns:
*		0 on success, error code on error
*	Parms:
*		none
*
*	The name is lower case to fit in with all the rest of
*	the netcard_probe names.  This function looks for
*	another TLan based adapter, setting it up with the
*	allocated device struct if one is found.
*	tlan_probe has been ported to the new net API and
*	now allocates its own device structure. This function
*	is also used by modules.
*
**************************************************************/

static int __devinit tlan_probe1(struct pci_dev *pdev,
S
Stephen Hemminger 已提交
464
				 long ioaddr, int irq, int rev,
465
				 const struct pci_device_id *ent)
L
Linus Torvalds 已提交
466 467 468
{

	struct net_device  *dev;
469
	struct tlan_priv  *priv;
L
Linus Torvalds 已提交
470 471 472
	u16		   device_id;
	int		   reg, rc = -ENODEV;

473
#ifdef CONFIG_PCI
L
Linus Torvalds 已提交
474 475 476 477 478
	if (pdev) {
		rc = pci_enable_device(pdev);
		if (rc)
			return rc;

479
		rc = pci_request_regions(pdev, tlan_signature);
L
Linus Torvalds 已提交
480
		if (rc) {
481
			pr_err("Could not reserve IO regions\n");
L
Linus Torvalds 已提交
482 483 484
			goto err_out;
		}
	}
485
#endif  /*  CONFIG_PCI  */
L
Linus Torvalds 已提交
486

487
	dev = alloc_etherdev(sizeof(struct tlan_priv));
L
Linus Torvalds 已提交
488 489 490 491 492
	if (dev == NULL) {
		rc = -ENOMEM;
		goto err_out_regions;
	}
	SET_NETDEV_DEV(dev, &pdev->dev);
493

L
Linus Torvalds 已提交
494 495
	priv = netdev_priv(dev);

496
	priv->pci_dev = pdev;
D
David Howells 已提交
497
	priv->dev = dev;
498

L
Linus Torvalds 已提交
499 500
	/* Is this a PCI device? */
	if (pdev) {
501
		u32		   pci_io_base = 0;
L
Linus Torvalds 已提交
502 503 504

		priv->adapter = &board_info[ent->driver_data];

505
		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
L
Linus Torvalds 已提交
506
		if (rc) {
507
			pr_err("No suitable PCI mapping available\n");
L
Linus Torvalds 已提交
508 509 510
			goto err_out_free_dev;
		}

511
		for (reg = 0; reg <= 5; reg++) {
L
Linus Torvalds 已提交
512 513
			if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
				pci_io_base = pci_resource_start(pdev, reg);
514 515 516
				TLAN_DBG(TLAN_DEBUG_GNRL,
					 "IO mapping is available at %x.\n",
					 pci_io_base);
L
Linus Torvalds 已提交
517 518 519 520
				break;
			}
		}
		if (!pci_io_base) {
521
			pr_err("No IO mappings available\n");
L
Linus Torvalds 已提交
522 523 524
			rc = -EIO;
			goto err_out_free_dev;
		}
525

L
Linus Torvalds 已提交
526 527
		dev->base_addr = pci_io_base;
		dev->irq = pdev->irq;
528
		priv->adapter_rev = pdev->revision;
L
Linus Torvalds 已提交
529 530 531 532 533 534 535 536 537
		pci_set_master(pdev);
		pci_set_drvdata(pdev, dev);

	} else	{     /* EISA card */
		/* This is a hack. We need to know which board structure
		 * is suited for this adapter */
		device_id = inw(ioaddr + EISA_ID2);
		priv->is_eisa = 1;
		if (device_id == 0x20F1) {
538 539
			priv->adapter = &board_info[13]; /* NetFlex-3/E */
			priv->adapter_rev = 23;		/* TLAN 2.3 */
L
Linus Torvalds 已提交
540 541
		} else {
			priv->adapter = &board_info[14];
542
			priv->adapter_rev = 10;		/* TLAN 1.0 */
L
Linus Torvalds 已提交
543 544 545 546 547 548 549 550
		}
		dev->base_addr = ioaddr;
		dev->irq = irq;
	}

	/* Kernel parameters */
	if (dev->mem_start) {
		priv->aui    = dev->mem_start & 0x01;
S
Stephen Hemminger 已提交
551 552 553 554
		priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
			: (dev->mem_start & 0x06) >> 1;
		priv->speed  = ((dev->mem_start & 0x18) == 0x18) ? 0
			: (dev->mem_start & 0x18) >> 3;
555

556
		if (priv->speed == 0x1)
L
Linus Torvalds 已提交
557
			priv->speed = TLAN_SPEED_10;
558
		else if (priv->speed == 0x2)
L
Linus Torvalds 已提交
559
			priv->speed = TLAN_SPEED_100;
560

L
Linus Torvalds 已提交
561 562 563 564 565 566 567
		debug = priv->debug = dev->mem_end;
	} else {
		priv->aui    = aui[boards_found];
		priv->speed  = speed[boards_found];
		priv->duplex = duplex[boards_found];
		priv->debug = debug;
	}
568

L
Linus Torvalds 已提交
569 570
	/* This will be used when we get an adapter error from
	 * within our irq handler */
571
	INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work);
L
Linus Torvalds 已提交
572 573

	spin_lock_init(&priv->lock);
574

575
	rc = tlan_init(dev);
L
Linus Torvalds 已提交
576
	if (rc) {
577
		pr_err("Could not set up device\n");
L
Linus Torvalds 已提交
578 579 580 581 582
		goto err_out_free_dev;
	}

	rc = register_netdev(dev);
	if (rc) {
583
		pr_err("Could not register device\n");
L
Linus Torvalds 已提交
584 585 586
		goto err_out_uninit;
	}

587

588
	tlan_devices_installed++;
L
Linus Torvalds 已提交
589
	boards_found++;
590

L
Linus Torvalds 已提交
591 592 593 594
	/* pdev is NULL if this is an EISA device */
	if (pdev)
		tlan_have_pci++;
	else {
595 596
		priv->next_device = tlan_eisa_devices;
		tlan_eisa_devices = dev;
L
Linus Torvalds 已提交
597 598
		tlan_have_eisa++;
	}
599

600 601 602 603 604
	netdev_info(dev, "irq=%2d, io=%04x, %s, Rev. %d\n",
		    (int)dev->irq,
		    (int)dev->base_addr,
		    priv->adapter->device_label,
		    priv->adapter_rev);
L
Linus Torvalds 已提交
605 606 607
	return 0;

err_out_uninit:
608 609
	pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage,
			    priv->dma_storage_dma);
L
Linus Torvalds 已提交
610 611 612 613 614 615 616 617 618 619 620 621 622 623
err_out_free_dev:
	free_netdev(dev);
err_out_regions:
#ifdef CONFIG_PCI
	if (pdev)
		pci_release_regions(pdev);
#endif
err_out:
	if (pdev)
		pci_disable_device(pdev);
	return rc;
}


624
static void tlan_eisa_cleanup(void)
L
Linus Torvalds 已提交
625 626
{
	struct net_device *dev;
627
	struct tlan_priv *priv;
628

629 630
	while (tlan_have_eisa) {
		dev = tlan_eisa_devices;
L
Linus Torvalds 已提交
631
		priv = netdev_priv(dev);
632 633 634 635
		if (priv->dma_storage) {
			pci_free_consistent(priv->pci_dev, priv->dma_size,
					    priv->dma_storage,
					    priv->dma_storage_dma);
L
Linus Torvalds 已提交
636
		}
637 638 639 640
		release_region(dev->base_addr, 0x10);
		unregister_netdev(dev);
		tlan_eisa_devices = priv->next_device;
		free_netdev(dev);
L
Linus Torvalds 已提交
641 642 643
		tlan_have_eisa--;
	}
}
644 645


L
Linus Torvalds 已提交
646 647 648 649 650
static void __exit tlan_exit(void)
{
	pci_unregister_driver(&tlan_driver);

	if (tlan_have_eisa)
651
		tlan_eisa_cleanup();
L
Linus Torvalds 已提交
652 653 654 655 656 657 658 659 660 661

}


/* Module loading/unloading */
module_init(tlan_probe);
module_exit(tlan_exit);



662 663 664 665 666 667 668 669 670 671 672 673
/**************************************************************
 *	tlan_eisa_probe
 *
 *	Returns: 0 on success, 1 otherwise
 *
 *	Parms:	 None
 *
 *
 *	This functions probes for EISA devices and calls
 *	TLan_probe1 when one is found.
 *
 *************************************************************/
L
Linus Torvalds 已提交
674

675
static void  __init tlan_eisa_probe(void)
L
Linus Torvalds 已提交
676
{
677 678 679
	long	ioaddr;
	int	rc = -ENODEV;
	int	irq;
L
Linus Torvalds 已提交
680 681
	u16	device_id;

682
	if (!EISA_bus) {
L
Linus Torvalds 已提交
683 684 685
		TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
		return;
	}
686

L
Linus Torvalds 已提交
687 688
	/* Loop through all slots of the EISA bus */
	for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
689

690 691 692 693
		TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
			 (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID));
		TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
			 (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2));
L
Linus Torvalds 已提交
694 695


696 697 698 699
		TLAN_DBG(TLAN_DEBUG_PROBE,
			 "Probing for EISA adapter at IO: 0x%4x : ",
			 (int) ioaddr);
		if (request_region(ioaddr, 0x10, tlan_signature) == NULL)
L
Linus Torvalds 已提交
700 701
			goto out;

702
		if (inw(ioaddr + EISA_ID) != 0x110E) {
L
Linus Torvalds 已提交
703 704 705
			release_region(ioaddr, 0x10);
			goto out;
		}
706

L
Linus Torvalds 已提交
707
		device_id = inw(ioaddr + EISA_ID2);
708
		if (device_id !=  0x20F1 && device_id != 0x40F1) {
709
			release_region(ioaddr, 0x10);
L
Linus Torvalds 已提交
710 711
			goto out;
		}
712

713 714 715
		/* check if adapter is enabled */
		if (inb(ioaddr + EISA_CR) != 0x1) {
			release_region(ioaddr, 0x10);
L
Linus Torvalds 已提交
716 717
			goto out2;
		}
718 719

		if (debug == 0x10)
720
			pr_info("Found one\n");
L
Linus Torvalds 已提交
721 722 723


		/* Get irq from board */
724 725 726 727 728 729 730 731 732 733 734 735 736 737 738
		switch (inb(ioaddr + 0xcc0)) {
		case(0x10):
			irq = 5;
			break;
		case(0x20):
			irq = 9;
			break;
		case(0x40):
			irq = 10;
			break;
		case(0x80):
			irq = 11;
			break;
		default:
			goto out;
739 740 741
		}


L
Linus Torvalds 已提交
742
		/* Setup the newly found eisa adapter */
743 744
		rc = tlan_probe1(NULL, ioaddr, irq,
				 12, NULL);
L
Linus Torvalds 已提交
745
		continue;
746

747 748
out:
		if (debug == 0x10)
749
			pr_info("None found\n");
750
		continue;
L
Linus Torvalds 已提交
751

752 753
out2:
		if (debug == 0x10)
754
			pr_info("Card found but it is not enabled, skipping\n");
755
		continue;
756

L
Linus Torvalds 已提交
757 758
	}

759
}
L
Linus Torvalds 已提交
760 761

#ifdef CONFIG_NET_POLL_CONTROLLER
762
static void tlan_poll(struct net_device *dev)
L
Linus Torvalds 已提交
763 764
{
	disable_irq(dev->irq);
765
	tlan_handle_interrupt(dev->irq, dev);
L
Linus Torvalds 已提交
766 767 768 769
	enable_irq(dev->irq);
}
#endif

770 771 772 773 774 775
static const struct net_device_ops tlan_netdev_ops = {
	.ndo_open		= tlan_open,
	.ndo_stop		= tlan_close,
	.ndo_start_xmit		= tlan_start_tx,
	.ndo_tx_timeout		= tlan_tx_timeout,
	.ndo_get_stats		= tlan_get_stats,
776
	.ndo_set_rx_mode	= tlan_set_multicast_list,
777
	.ndo_do_ioctl		= tlan_ioctl,
778
	.ndo_change_mtu		= eth_change_mtu,
779
	.ndo_set_mac_address	= eth_mac_addr,
780 781
	.ndo_validate_addr	= eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
782
	.ndo_poll_controller	 = tlan_poll,
783 784
#endif
};
785

L
Linus Torvalds 已提交
786 787


788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805
/***************************************************************
 *	tlan_init
 *
 *	Returns:
 *		0 on success, error code otherwise.
 *	Parms:
 *		dev	The structure of the device to be
 *			init'ed.
 *
 *	This function completes the initialization of the
 *	device structure and driver.  It reserves the IO
 *	addresses, allocates memory for the lists and bounce
 *	buffers, retrieves the MAC address from the eeprom
 *	and assignes the device's methods.
 *
 **************************************************************/

static int tlan_init(struct net_device *dev)
L
Linus Torvalds 已提交
806 807
{
	int		dma_size;
808
	int		err;
L
Linus Torvalds 已提交
809
	int		i;
810
	struct tlan_priv	*priv;
L
Linus Torvalds 已提交
811 812

	priv = netdev_priv(dev);
813

814 815 816 817 818 819 820 821
	dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS)
		* (sizeof(struct tlan_list));
	priv->dma_storage = pci_alloc_consistent(priv->pci_dev,
						 dma_size,
						 &priv->dma_storage_dma);
	priv->dma_size = dma_size;

	if (priv->dma_storage == NULL) {
822
		pr_err("Could not allocate lists and buffers for %s\n",
823
		       dev->name);
L
Linus Torvalds 已提交
824 825
		return -ENOMEM;
	}
826 827 828 829 830 831 832
	memset(priv->dma_storage, 0, dma_size);
	priv->rx_list = (struct tlan_list *)
		ALIGN((unsigned long)priv->dma_storage, 8);
	priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8);
	priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS;
	priv->tx_list_dma =
		priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS;
S
Stephen Hemminger 已提交
833

L
Linus Torvalds 已提交
834
	err = 0;
835 836 837 838 839
	for (i = 0;  i < 6 ; i++)
		err |= tlan_ee_read_byte(dev,
					 (u8) priv->adapter->addr_ofs + i,
					 (u8 *) &dev->dev_addr[i]);
	if (err) {
840 841
		pr_err("%s: Error reading MAC from eeprom: %d\n",
		       dev->name, err);
L
Linus Torvalds 已提交
842 843 844 845 846 847
	}
	dev->addr_len = 6;

	netif_carrier_off(dev);

	/* Device methods */
848
	dev->netdev_ops = &tlan_netdev_ops;
L
Linus Torvalds 已提交
849 850 851 852
	dev->watchdog_timeo = TX_TIMEOUT;

	return 0;

853
}
L
Linus Torvalds 已提交
854 855 856 857




858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873
/***************************************************************
 *	tlan_open
 *
 *	Returns:
 *		0 on success, error code otherwise.
 *	Parms:
 *		dev	Structure of device to be opened.
 *
 *	This routine puts the driver and TLAN adapter in a
 *	state where it is ready to send and receive packets.
 *	It allocates the IRQ, resets and brings the adapter
 *	out of reset, and allows interrupts.  It also delays
 *	the startup for autonegotiation or sends a Rx GO
 *	command to the adapter, as appropriate.
 *
 **************************************************************/
L
Linus Torvalds 已提交
874

875
static int tlan_open(struct net_device *dev)
L
Linus Torvalds 已提交
876
{
877
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
878
	int		err;
879

880 881 882
	priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION);
	err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED,
			  dev->name, dev);
883

884
	if (err) {
885 886
		netdev_err(dev, "Cannot open because IRQ %d is already in use\n",
			   dev->irq);
L
Linus Torvalds 已提交
887 888
		return err;
	}
889

L
Linus Torvalds 已提交
890
	init_timer(&priv->timer);
891

S
Sakari Ailus 已提交
892
	tlan_start(dev);
L
Linus Torvalds 已提交
893

894 895
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened.  TLAN Chip Rev: %x\n",
		 dev->name, priv->tlan_rev);
L
Linus Torvalds 已提交
896 897 898

	return 0;

899
}
L
Linus Torvalds 已提交
900 901 902



903 904 905 906 907 908 909 910 911 912 913 914 915 916
/**************************************************************
 *	tlan_ioctl
 *
 *	Returns:
 *		0 on success, error code otherwise
 *	Params:
 *		dev	structure of device to receive ioctl.
 *
 *		rq	ifreq structure to hold userspace data.
 *
 *		cmd	ioctl command.
 *
 *
 *************************************************************/
L
Linus Torvalds 已提交
917

918
static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
L
Linus Torvalds 已提交
919
{
920
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
921
	struct mii_ioctl_data *data = if_mii(rq);
922
	u32 phy   = priv->phy[priv->phy_num];
923

924
	if (!priv->phy_online)
L
Linus Torvalds 已提交
925 926
		return -EAGAIN;

927 928 929
	switch (cmd) {
	case SIOCGMIIPHY:		/* get address of MII PHY in use. */
		data->phy_id = phy;
L
Linus Torvalds 已提交
930 931


932 933 934 935
	case SIOCGMIIREG:		/* read MII PHY register. */
		tlan_mii_read_reg(dev, data->phy_id & 0x1f,
				  data->reg_num & 0x1f, &data->val_out);
		return 0;
936

L
Linus Torvalds 已提交
937

938 939 940 941 942 943
	case SIOCSMIIREG:		/* write MII PHY register. */
		tlan_mii_write_reg(dev, data->phy_id & 0x1f,
				   data->reg_num & 0x1f, data->val_in);
		return 0;
	default:
		return -EOPNOTSUPP;
L
Linus Torvalds 已提交
944
	}
945
}
L
Linus Torvalds 已提交
946 947


948 949 950 951 952 953 954 955 956 957
/***************************************************************
 *	tlan_tx_timeout
 *
 *	Returns: nothing
 *
 *	Params:
 *		dev	structure of device which timed out
 *			during transmit.
 *
 **************************************************************/
L
Linus Torvalds 已提交
958

959
static void tlan_tx_timeout(struct net_device *dev)
L
Linus Torvalds 已提交
960
{
961

962
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
963

L
Linus Torvalds 已提交
964
	/* Ok so we timed out, lets see what we can do about it...*/
965 966 967 968
	tlan_free_lists(dev);
	tlan_reset_lists(dev);
	tlan_read_and_clear_stats(dev, TLAN_IGNORE);
	tlan_reset_adapter(dev);
E
Eric Dumazet 已提交
969
	dev->trans_start = jiffies; /* prevent tx timeout */
970
	netif_wake_queue(dev);
L
Linus Torvalds 已提交
971 972

}
973

L
Linus Torvalds 已提交
974

975 976 977 978 979 980 981 982 983
/***************************************************************
 *	tlan_tx_timeout_work
 *
 *	Returns: nothing
 *
 *	Params:
 *		work	work item of device which timed out
 *
 **************************************************************/
D
David Howells 已提交
984

985
static void tlan_tx_timeout_work(struct work_struct *work)
D
David Howells 已提交
986
{
987 988
	struct tlan_priv	*priv =
		container_of(work, struct tlan_priv, tlan_tqueue);
D
David Howells 已提交
989

990
	tlan_tx_timeout(priv->dev);
D
David Howells 已提交
991 992 993
}


L
Linus Torvalds 已提交
994

995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016
/***************************************************************
 *	tlan_start_tx
 *
 *	Returns:
 *		0 on success, non-zero on failure.
 *	Parms:
 *		skb	A pointer to the sk_buff containing the
 *			frame to be sent.
 *		dev	The device to send the data on.
 *
 *	This function adds a frame to the Tx list to be sent
 *	ASAP.  First it	verifies that the adapter is ready and
 *	there is room in the queue.  Then it sets up the next
 *	available list, copies the frame to the	corresponding
 *	buffer.  If the adapter Tx channel is idle, it gives
 *	the adapter a Tx Go command on the list, otherwise it
 *	sets the forward address of the previous list to point
 *	to this one.  Then it frees the sk_buff.
 *
 **************************************************************/

static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev)
L
Linus Torvalds 已提交
1017
{
1018
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1019
	dma_addr_t	tail_list_phys;
1020
	struct tlan_list	*tail_list;
L
Linus Torvalds 已提交
1021
	unsigned long	flags;
1022
	unsigned int    txlen;
L
Linus Torvalds 已提交
1023

1024 1025 1026
	if (!priv->phy_online) {
		TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
			 dev->name);
L
Linus Torvalds 已提交
1027
		dev_kfree_skb_any(skb);
1028
		return NETDEV_TX_OK;
L
Linus Torvalds 已提交
1029 1030
	}

1031
	if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
1032
		return NETDEV_TX_OK;
1033
	txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
1034

1035 1036 1037
	tail_list = priv->tx_list + priv->tx_tail;
	tail_list_phys =
		priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail;
1038

1039 1040 1041 1042
	if (tail_list->c_stat != TLAN_CSTAT_UNUSED) {
		TLAN_DBG(TLAN_DEBUG_TX,
			 "TRANSMIT:  %s is busy (Head=%d Tail=%d)\n",
			 dev->name, priv->tx_head, priv->tx_tail);
L
Linus Torvalds 已提交
1043
		netif_stop_queue(dev);
1044
		priv->tx_busy_count++;
1045
		return NETDEV_TX_BUSY;
L
Linus Torvalds 已提交
1046 1047 1048 1049
	}

	tail_list->forward = 0;

1050
	tail_list->buffer[0].address = pci_map_single(priv->pci_dev,
1051 1052
						      skb->data, txlen,
						      PCI_DMA_TODEVICE);
1053
	tlan_store_skb(tail_list, skb);
L
Linus Torvalds 已提交
1054

1055
	tail_list->frame_size = (u16) txlen;
1056
	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
1057 1058
	tail_list->buffer[1].count = 0;
	tail_list->buffer[1].address = 0;
L
Linus Torvalds 已提交
1059 1060

	spin_lock_irqsave(&priv->lock, flags);
1061 1062 1063 1064 1065 1066 1067 1068
	tail_list->c_stat = TLAN_CSTAT_READY;
	if (!priv->tx_in_progress) {
		priv->tx_in_progress = 1;
		TLAN_DBG(TLAN_DEBUG_TX,
			 "TRANSMIT:  Starting TX on buffer %d\n",
			 priv->tx_tail);
		outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM);
		outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD);
L
Linus Torvalds 已提交
1069
	} else {
1070 1071 1072 1073 1074
		TLAN_DBG(TLAN_DEBUG_TX,
			 "TRANSMIT:  Adding buffer %d to TX channel\n",
			 priv->tx_tail);
		if (priv->tx_tail == 0) {
			(priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward
S
Stephen Hemminger 已提交
1075
				= tail_list_phys;
L
Linus Torvalds 已提交
1076
		} else {
1077
			(priv->tx_list + (priv->tx_tail - 1))->forward
S
Stephen Hemminger 已提交
1078
				= tail_list_phys;
L
Linus Torvalds 已提交
1079 1080 1081 1082
		}
	}
	spin_unlock_irqrestore(&priv->lock, flags);

1083
	CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS);
L
Linus Torvalds 已提交
1084

1085
	return NETDEV_TX_OK;
L
Linus Torvalds 已提交
1086

1087
}
L
Linus Torvalds 已提交
1088 1089 1090 1091




1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110
/***************************************************************
 *	tlan_handle_interrupt
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		irq	The line on which the interrupt
 *			occurred.
 *		dev_id	A pointer to the device assigned to
 *			this irq line.
 *
 *	This function handles an interrupt generated by its
 *	assigned TLAN adapter.  The function deactivates
 *	interrupts on its adapter, records the type of
 *	interrupt, executes the appropriate subhandler, and
 *	acknowdges the interrupt to the adapter (thus
 *	re-enabling adapter interrupts.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1111

1112
static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id)
L
Linus Torvalds 已提交
1113
{
1114
	struct net_device	*dev = dev_id;
1115
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1116
	u16		host_int;
1117
	u16		type;
L
Linus Torvalds 已提交
1118 1119 1120

	spin_lock(&priv->lock);

1121 1122 1123
	host_int = inw(dev->base_addr + TLAN_HOST_INT);
	type = (host_int & TLAN_HI_IT_MASK) >> 2;
	if (type) {
1124 1125
		u32	ack;
		u32	host_cmd;
L
Linus Torvalds 已提交
1126

1127 1128
		outw(host_int, dev->base_addr + TLAN_HOST_INT);
		ack = tlan_int_vector[type](dev, host_int);
L
Linus Torvalds 已提交
1129

1130 1131 1132
		if (ack) {
			host_cmd = TLAN_HC_ACK | ack | (type << 18);
			outl(host_cmd, dev->base_addr + TLAN_HOST_CMD);
1133
		}
L
Linus Torvalds 已提交
1134 1135 1136 1137
	}

	spin_unlock(&priv->lock);

1138
	return IRQ_RETVAL(type);
1139
}
L
Linus Torvalds 已提交
1140 1141 1142 1143




1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157
/***************************************************************
 *	tlan_close
 *
 *	Returns:
 *		An error code.
 *	Parms:
 *		dev	The device structure of the device to
 *			close.
 *
 *	This function shuts down the adapter.  It records any
 *	stats, puts the adapter into reset state, deactivates
 *	its time as needed, and	frees the irq it is using.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1158

1159
static int tlan_close(struct net_device *dev)
L
Linus Torvalds 已提交
1160
{
1161
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1162 1163

	priv->neg_be_verbose = 0;
S
Sakari Ailus 已提交
1164
	tlan_stop(dev);
1165

1166 1167 1168
	free_irq(dev->irq, dev);
	tlan_free_lists(dev);
	TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name);
L
Linus Torvalds 已提交
1169 1170 1171

	return 0;

1172
}
L
Linus Torvalds 已提交
1173 1174 1175 1176




1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190
/***************************************************************
 *	tlan_get_stats
 *
 *	Returns:
 *		A pointer to the device's statistics structure.
 *	Parms:
 *		dev	The device structure to return the
 *			stats for.
 *
 *	This function updates the devices statistics by reading
 *	the TLAN chip's onboard registers.  Then it returns the
 *	address of the statistics structure.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1191

1192
static struct net_device_stats *tlan_get_stats(struct net_device *dev)
L
Linus Torvalds 已提交
1193
{
1194
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1195 1196 1197
	int i;

	/* Should only read stats if open ? */
1198
	tlan_read_and_clear_stats(dev, TLAN_RECORD);
L
Linus Torvalds 已提交
1199

1200 1201 1202 1203 1204 1205 1206
	TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE:  %s EOC count = %d\n", dev->name,
		 priv->rx_eoc_count);
	TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT:  %s Busy count = %d\n", dev->name,
		 priv->tx_busy_count);
	if (debug & TLAN_DEBUG_GNRL) {
		tlan_print_dio(dev->base_addr);
		tlan_phy_print(dev);
L
Linus Torvalds 已提交
1207
	}
1208 1209 1210 1211 1212
	if (debug & TLAN_DEBUG_LIST) {
		for (i = 0; i < TLAN_NUM_RX_LISTS; i++)
			tlan_print_list(priv->rx_list + i, "RX", i);
		for (i = 0; i < TLAN_NUM_TX_LISTS; i++)
			tlan_print_list(priv->tx_list + i, "TX", i);
L
Linus Torvalds 已提交
1213
	}
1214

S
Stephen Hemminger 已提交
1215
	return &dev->stats;
L
Linus Torvalds 已提交
1216

1217
}
L
Linus Torvalds 已提交
1218 1219 1220 1221




1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240
/***************************************************************
 *	tlan_set_multicast_list
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	The device structure to set the
 *			multicast list for.
 *
 *	This function sets the TLAN adaptor to various receive
 *	modes.  If the IFF_PROMISC flag is set, promiscuous
 *	mode is acitviated.  Otherwise,	promiscuous mode is
 *	turned off.  If the IFF_ALLMULTI flag is set, then
 *	the hash table is set to receive all group addresses.
 *	Otherwise, the first three multicast addresses are
 *	stored in AREG_1-3, and the rest are selected via the
 *	hash table, as necessary.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1241

1242
static void tlan_set_multicast_list(struct net_device *dev)
1243
{
1244
	struct netdev_hw_addr *ha;
L
Linus Torvalds 已提交
1245 1246 1247 1248 1249 1250
	u32			hash1 = 0;
	u32			hash2 = 0;
	int			i;
	u32			offset;
	u8			tmp;

1251 1252 1253 1254
	if (dev->flags & IFF_PROMISC) {
		tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
		tlan_dio_write8(dev->base_addr,
				TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF);
L
Linus Torvalds 已提交
1255
	} else {
1256 1257 1258 1259 1260 1261 1262 1263 1264 1265
		tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
		tlan_dio_write8(dev->base_addr,
				TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF);
		if (dev->flags & IFF_ALLMULTI) {
			for (i = 0; i < 3; i++)
				tlan_set_mac(dev, i + 1, NULL);
			tlan_dio_write32(dev->base_addr, TLAN_HASH_1,
					 0xffffffff);
			tlan_dio_write32(dev->base_addr, TLAN_HASH_2,
					 0xffffffff);
L
Linus Torvalds 已提交
1266
		} else {
1267
			i = 0;
1268
			netdev_for_each_mc_addr(ha, dev) {
1269 1270
				if (i < 3) {
					tlan_set_mac(dev, i + 1,
1271
						     (char *) &ha->addr);
L
Linus Torvalds 已提交
1272
				} else {
1273 1274 1275 1276
					offset =
						tlan_hash_func((u8 *)&ha->addr);
					if (offset < 32)
						hash1 |= (1 << offset);
L
Linus Torvalds 已提交
1277
					else
1278
						hash2 |= (1 << (offset - 32));
L
Linus Torvalds 已提交
1279
				}
1280
				i++;
L
Linus Torvalds 已提交
1281
			}
1282 1283 1284 1285
			for ( ; i < 3; i++)
				tlan_set_mac(dev, i + 1, NULL);
			tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1);
			tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2);
L
Linus Torvalds 已提交
1286 1287 1288
		}
	}

1289
}
L
Linus Torvalds 已提交
1290 1291 1292 1293 1294 1295



/*****************************************************************************
******************************************************************************

1296
ThunderLAN driver interrupt vectors and table
L
Linus Torvalds 已提交
1297

1298 1299 1300
please see chap. 4, "Interrupt Handling" of the "ThunderLAN
Programmer's Guide" for more informations on handling interrupts
generated by TLAN based adapters.
L
Linus Torvalds 已提交
1301 1302 1303 1304 1305 1306 1307

******************************************************************************
*****************************************************************************/




1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330
/***************************************************************
 *	tlan_handle_tx_eof
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This function handles Tx EOF interrupts which are raised
 *	by the adapter when it has completed sending the
 *	contents of a buffer.  If detemines which list/buffer
 *	was completed and resets it.  If the buffer was the last
 *	in the channel (EOC), then the function checks to see if
 *	another buffer is ready to send, and if so, sends a Tx
 *	Go command.  Finally, the driver activates/continues the
 *	activity LED.
 *
 **************************************************************/

static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1331
{
1332
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1333
	int		eoc = 0;
1334
	struct tlan_list	*head_list;
L
Linus Torvalds 已提交
1335 1336
	dma_addr_t	head_list_phys;
	u32		ack = 0;
1337
	u16		tmp_c_stat;
1338

1339 1340 1341 1342
	TLAN_DBG(TLAN_DEBUG_TX,
		 "TRANSMIT:  Handling TX EOF (Head=%d Tail=%d)\n",
		 priv->tx_head, priv->tx_tail);
	head_list = priv->tx_list + priv->tx_head;
L
Linus Torvalds 已提交
1343

1344 1345 1346
	while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
	       && (ack < 255)) {
		struct sk_buff *skb = tlan_get_skb(head_list);
1347

L
Linus Torvalds 已提交
1348
		ack++;
1349
		pci_unmap_single(priv->pci_dev, head_list->buffer[0].address,
1350 1351 1352 1353 1354 1355
				 max(skb->len,
				     (unsigned int)TLAN_MIN_FRAME_SIZE),
				 PCI_DMA_TODEVICE);
		dev_kfree_skb_any(skb);
		head_list->buffer[8].address = 0;
		head_list->buffer[9].address = 0;
1356

1357
		if (tmp_c_stat & TLAN_CSTAT_EOC)
L
Linus Torvalds 已提交
1358
			eoc = 1;
1359

1360
		dev->stats.tx_bytes += head_list->frame_size;
L
Linus Torvalds 已提交
1361

1362
		head_list->c_stat = TLAN_CSTAT_UNUSED;
1363
		netif_start_queue(dev);
1364 1365
		CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS);
		head_list = priv->tx_list + priv->tx_head;
L
Linus Torvalds 已提交
1366 1367 1368
	}

	if (!ack)
1369 1370
		netdev_info(dev,
			    "Received interrupt for uncompleted TX frame\n");
1371 1372 1373 1374 1375 1376 1377 1378

	if (eoc) {
		TLAN_DBG(TLAN_DEBUG_TX,
			 "TRANSMIT:  handling TX EOC (Head=%d Tail=%d)\n",
			 priv->tx_head, priv->tx_tail);
		head_list = priv->tx_list + priv->tx_head;
		head_list_phys = priv->tx_list_dma
			+ sizeof(struct tlan_list)*priv->tx_head;
1379 1380
		if ((head_list->c_stat & TLAN_CSTAT_READY)
		    == TLAN_CSTAT_READY) {
1381
			outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
L
Linus Torvalds 已提交
1382 1383
			ack |= TLAN_HC_GO;
		} else {
1384
			priv->tx_in_progress = 0;
L
Linus Torvalds 已提交
1385 1386
		}
	}
1387

1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399
	if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
		tlan_dio_write8(dev->base_addr,
				TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
		if (priv->timer.function == NULL) {
			priv->timer.function = tlan_timer;
			priv->timer.data = (unsigned long) dev;
			priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
			priv->timer_set_at = jiffies;
			priv->timer_type = TLAN_TIMER_ACTIVITY;
			add_timer(&priv->timer);
		} else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
			priv->timer_set_at = jiffies;
L
Linus Torvalds 已提交
1400 1401 1402 1403 1404
		}
	}

	return ack;

1405
}
L
Linus Torvalds 已提交
1406 1407 1408 1409




1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425
/***************************************************************
 *	TLan_HandleStatOverflow
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This function handles the Statistics Overflow interrupt
 *	which means that one or more of the TLAN statistics
 *	registers has reached 1/2 capacity and needs to be read.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1426

1427
static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1428
{
1429
	tlan_read_and_clear_stats(dev, TLAN_RECORD);
L
Linus Torvalds 已提交
1430 1431 1432

	return 1;

1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463
}




/***************************************************************
 *	TLan_HandleRxEOF
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This function handles the Rx EOF interrupt which
 *	indicates a frame has been received by the adapter from
 *	the net and the frame has been transferred to memory.
 *	The function determines the bounce buffer the frame has
 *	been loaded into, creates a new sk_buff big enough to
 *	hold the frame, and sends it to protocol stack.  It
 *	then resets the used buffer and appends it to the end
 *	of the list.  If the frame was the last in the Rx
 *	channel (EOC), the function restarts the receive channel
 *	by sending an Rx Go command to the adapter.  Then it
 *	activates/continues the activity LED.
 *
 **************************************************************/

static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1464
{
1465
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1466 1467
	u32		ack = 0;
	int		eoc = 0;
1468
	struct tlan_list	*head_list;
L
Linus Torvalds 已提交
1469
	struct sk_buff	*skb;
1470 1471
	struct tlan_list	*tail_list;
	u16		tmp_c_stat;
L
Linus Torvalds 已提交
1472 1473
	dma_addr_t	head_list_phys;

1474 1475 1476 1477 1478
	TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE:  handling RX EOF (Head=%d Tail=%d)\n",
		 priv->rx_head, priv->rx_tail);
	head_list = priv->rx_list + priv->rx_head;
	head_list_phys =
		priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head;
1479

1480 1481 1482 1483
	while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
	       && (ack < 255)) {
		dma_addr_t frame_dma = head_list->buffer[0].address;
		u32 frame_size = head_list->frame_size;
1484 1485
		struct sk_buff *new_skb;

L
Linus Torvalds 已提交
1486
		ack++;
1487
		if (tmp_c_stat & TLAN_CSTAT_EOC)
L
Linus Torvalds 已提交
1488
			eoc = 1;
1489

1490 1491
		new_skb = netdev_alloc_skb_ip_align(dev,
						    TLAN_MAX_FRAME_SIZE + 5);
1492
		if (!new_skb)
1493
			goto drop_and_reuse;
1494

1495 1496
		skb = tlan_get_skb(head_list);
		pci_unmap_single(priv->pci_dev, frame_dma,
1497
				 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
1498
		skb_put(skb, frame_size);
L
Linus Torvalds 已提交
1499

1500
		dev->stats.rx_bytes += frame_size;
L
Linus Torvalds 已提交
1501

1502 1503
		skb->protocol = eth_type_trans(skb, dev);
		netif_rx(skb);
1504

1505 1506 1507
		head_list->buffer[0].address =
			pci_map_single(priv->pci_dev, new_skb->data,
				       TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
S
Stephen Hemminger 已提交
1508

1509
		tlan_store_skb(head_list, new_skb);
S
Stephen Hemminger 已提交
1510
drop_and_reuse:
L
Linus Torvalds 已提交
1511
		head_list->forward = 0;
1512 1513
		head_list->c_stat = 0;
		tail_list = priv->rx_list + priv->rx_tail;
L
Linus Torvalds 已提交
1514 1515
		tail_list->forward = head_list_phys;

1516 1517 1518 1519 1520
		CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS);
		CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS);
		head_list = priv->rx_list + priv->rx_head;
		head_list_phys = priv->rx_list_dma
			+ sizeof(struct tlan_list)*priv->rx_head;
L
Linus Torvalds 已提交
1521 1522 1523
	}

	if (!ack)
1524 1525
		netdev_info(dev,
			    "Received interrupt for uncompleted RX frame\n");
1526 1527 1528 1529 1530 1531 1532 1533 1534 1535


	if (eoc) {
		TLAN_DBG(TLAN_DEBUG_RX,
			 "RECEIVE:  handling RX EOC (Head=%d Tail=%d)\n",
			 priv->rx_head, priv->rx_tail);
		head_list = priv->rx_list + priv->rx_head;
		head_list_phys = priv->rx_list_dma
			+ sizeof(struct tlan_list)*priv->rx_head;
		outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
L
Linus Torvalds 已提交
1536
		ack |= TLAN_HC_GO | TLAN_HC_RT;
1537
		priv->rx_eoc_count++;
L
Linus Torvalds 已提交
1538 1539
	}

1540 1541 1542 1543 1544
	if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
		tlan_dio_write8(dev->base_addr,
				TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
		if (priv->timer.function == NULL)  {
			priv->timer.function = tlan_timer;
L
Linus Torvalds 已提交
1545 1546
			priv->timer.data = (unsigned long) dev;
			priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1547 1548
			priv->timer_set_at = jiffies;
			priv->timer_type = TLAN_TIMER_ACTIVITY;
L
Linus Torvalds 已提交
1549
			add_timer(&priv->timer);
1550 1551
		} else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
			priv->timer_set_at = jiffies;
L
Linus Torvalds 已提交
1552 1553 1554 1555 1556
		}
	}

	return ack;

1557
}
L
Linus Torvalds 已提交
1558 1559 1560 1561




1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577
/***************************************************************
 *	tlan_handle_dummy
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This function handles the Dummy interrupt, which is
 *	raised whenever a test interrupt is generated by setting
 *	the Req_Int bit of HOST_CMD to 1.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1578

1579
static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1580
{
1581
	netdev_info(dev, "Test interrupt\n");
L
Linus Torvalds 已提交
1582 1583
	return 1;

1584
}
L
Linus Torvalds 已提交
1585 1586 1587 1588




1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607
/***************************************************************
 *	tlan_handle_tx_eoc
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This driver is structured to determine EOC occurrences by
 *	reading the CSTAT member of the list structure.  Tx EOC
 *	interrupts are disabled via the DIO INTDIS register.
 *	However, TLAN chips before revision 3.0 didn't have this
 *	functionality, so process EOC events if this is the
 *	case.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1608

1609
static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1610
{
1611 1612
	struct tlan_priv	*priv = netdev_priv(dev);
	struct tlan_list		*head_list;
L
Linus Torvalds 已提交
1613 1614
	dma_addr_t		head_list_phys;
	u32			ack = 1;
1615

L
Linus Torvalds 已提交
1616
	host_int = 0;
1617 1618 1619 1620 1621 1622 1623
	if (priv->tlan_rev < 0x30) {
		TLAN_DBG(TLAN_DEBUG_TX,
			 "TRANSMIT:  handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
			 priv->tx_head, priv->tx_tail);
		head_list = priv->tx_list + priv->tx_head;
		head_list_phys = priv->tx_list_dma
			+ sizeof(struct tlan_list)*priv->tx_head;
1624 1625
		if ((head_list->c_stat & TLAN_CSTAT_READY)
		    == TLAN_CSTAT_READY) {
L
Linus Torvalds 已提交
1626
			netif_stop_queue(dev);
1627
			outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
L
Linus Torvalds 已提交
1628 1629
			ack |= TLAN_HC_GO;
		} else {
1630
			priv->tx_in_progress = 0;
L
Linus Torvalds 已提交
1631 1632 1633 1634 1635
		}
	}

	return ack;

1636
}
L
Linus Torvalds 已提交
1637 1638 1639 1640




1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659
/***************************************************************
 *	tlan_handle_status_check
 *
 *	Returns:
 *		0 if Adapter check, 1 if Network Status check.
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This function handles Adapter Check/Network Status
 *	interrupts generated by the adapter.  It checks the
 *	vector in the HOST_INT register to determine if it is
 *	an Adapter Check interrupt.  If so, it resets the
 *	adapter.  Otherwise it clears the status registers
 *	and services the PHY.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1660

1661
static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int)
1662
{
1663
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1664 1665 1666 1667 1668 1669
	u32		ack;
	u32		error;
	u8		net_sts;
	u32		phy;
	u16		tlphy_ctl;
	u16		tlphy_sts;
1670

L
Linus Torvalds 已提交
1671
	ack = 1;
1672 1673 1674
	if (host_int & TLAN_HI_IV_MASK) {
		netif_stop_queue(dev);
		error = inl(dev->base_addr + TLAN_CH_PARM);
1675
		netdev_info(dev, "Adaptor Error = 0x%x\n", error);
1676 1677
		tlan_read_and_clear_stats(dev, TLAN_RECORD);
		outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
L
Linus Torvalds 已提交
1678 1679 1680 1681 1682 1683

		schedule_work(&priv->tlan_tqueue);

		netif_wake_queue(dev);
		ack = 0;
	} else {
1684 1685 1686 1687 1688 1689 1690 1691
		TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name);
		phy = priv->phy[priv->phy_num];

		net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS);
		if (net_sts) {
			tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts);
			TLAN_DBG(TLAN_DEBUG_GNRL, "%s:    Net_Sts = %x\n",
				 dev->name, (unsigned) net_sts);
L
Linus Torvalds 已提交
1692
		}
1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705
		if ((net_sts & TLAN_NET_STS_MIRQ) &&  (priv->phy_num == 0)) {
			tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts);
			tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
			if (!(tlphy_sts & TLAN_TS_POLOK) &&
			    !(tlphy_ctl & TLAN_TC_SWAPOL)) {
				tlphy_ctl |= TLAN_TC_SWAPOL;
				tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
						   tlphy_ctl);
			} else if ((tlphy_sts & TLAN_TS_POLOK) &&
				   (tlphy_ctl & TLAN_TC_SWAPOL)) {
				tlphy_ctl &= ~TLAN_TC_SWAPOL;
				tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
						   tlphy_ctl);
L
Linus Torvalds 已提交
1706
			}
1707 1708 1709

			if (debug)
				tlan_phy_print(dev);
L
Linus Torvalds 已提交
1710 1711 1712 1713 1714
		}
	}

	return ack;

1715
}
L
Linus Torvalds 已提交
1716 1717 1718 1719




1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738
/***************************************************************
 *	tlan_handle_rx_eoc
 *
 *	Returns:
 *		1
 *	Parms:
 *		dev		Device assigned the IRQ that was
 *				raised.
 *		host_int	The contents of the HOST_INT
 *				port.
 *
 *	This driver is structured to determine EOC occurrences by
 *	reading the CSTAT member of the list structure.  Rx EOC
 *	interrupts are disabled via the DIO INTDIS register.
 *	However, TLAN chips before revision 3.0 didn't have this
 *	CSTAT member or a INTDIS register, so if this chip is
 *	pre-3.0, process EOC interrupts normally.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1739

1740
static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int)
L
Linus Torvalds 已提交
1741
{
1742
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1743 1744 1745
	dma_addr_t	head_list_phys;
	u32		ack = 1;

1746 1747 1748 1749 1750 1751 1752
	if (priv->tlan_rev < 0x30) {
		TLAN_DBG(TLAN_DEBUG_RX,
			 "RECEIVE:  Handling RX EOC (head=%d tail=%d) -- IRQ\n",
			 priv->rx_head, priv->rx_tail);
		head_list_phys = priv->rx_list_dma
			+ sizeof(struct tlan_list)*priv->rx_head;
		outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
L
Linus Torvalds 已提交
1753
		ack |= TLAN_HC_GO | TLAN_HC_RT;
1754
		priv->rx_eoc_count++;
L
Linus Torvalds 已提交
1755 1756 1757 1758
	}

	return ack;

1759
}
L
Linus Torvalds 已提交
1760 1761 1762 1763 1764 1765 1766




/*****************************************************************************
******************************************************************************

1767
ThunderLAN driver timer function
L
Linus Torvalds 已提交
1768 1769 1770 1771 1772

******************************************************************************
*****************************************************************************/


1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803
/***************************************************************
 *	tlan_timer
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		data	A value given to add timer when
 *			add_timer was called.
 *
 *	This function handles timed functionality for the
 *	TLAN driver.  The two current timer uses are for
 *	delaying for autonegotionation and driving the ACT LED.
 *	-	Autonegotiation requires being allowed about
 *		2 1/2 seconds before attempting to transmit a
 *		packet.  It would be a very bad thing to hang
 *		the kernel this long, so the driver doesn't
 *		allow transmission 'til after this time, for
 *		certain PHYs.  It would be much nicer if all
 *		PHYs were interrupt-capable like the internal
 *		PHY.
 *	-	The ACT LED, which shows adapter activity, is
 *		driven by the driver, and so must be left on
 *		for a short period to power up the LED so it
 *		can be seen.  This delay can be changed by
 *		changing the TLAN_TIMER_ACT_DELAY in tlan.h,
 *		if desired.  100 ms  produces a slightly
 *		sluggish response.
 *
 **************************************************************/

static void tlan_timer(unsigned long data)
L
Linus Torvalds 已提交
1804 1805
{
	struct net_device	*dev = (struct net_device *) data;
1806
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1807 1808 1809 1810 1811
	u32		elapsed;
	unsigned long	flags = 0;

	priv->timer.function = NULL;

1812
	switch (priv->timer_type) {
1813
#ifdef MONITOR
1814 1815 1816
	case TLAN_TIMER_LINK_BEAT:
		tlan_phy_monitor(dev);
		break;
L
Linus Torvalds 已提交
1817
#endif
1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849
	case TLAN_TIMER_PHY_PDOWN:
		tlan_phy_power_down(dev);
		break;
	case TLAN_TIMER_PHY_PUP:
		tlan_phy_power_up(dev);
		break;
	case TLAN_TIMER_PHY_RESET:
		tlan_phy_reset(dev);
		break;
	case TLAN_TIMER_PHY_START_LINK:
		tlan_phy_start_link(dev);
		break;
	case TLAN_TIMER_PHY_FINISH_AN:
		tlan_phy_finish_auto_neg(dev);
		break;
	case TLAN_TIMER_FINISH_RESET:
		tlan_finish_reset(dev);
		break;
	case TLAN_TIMER_ACTIVITY:
		spin_lock_irqsave(&priv->lock, flags);
		if (priv->timer.function == NULL) {
			elapsed = jiffies - priv->timer_set_at;
			if (elapsed >= TLAN_TIMER_ACT_DELAY) {
				tlan_dio_write8(dev->base_addr,
						TLAN_LED_REG, TLAN_LED_LINK);
			} else  {
				priv->timer.function = tlan_timer;
				priv->timer.expires = priv->timer_set_at
					+ TLAN_TIMER_ACT_DELAY;
				spin_unlock_irqrestore(&priv->lock, flags);
				add_timer(&priv->timer);
				break;
L
Linus Torvalds 已提交
1850
			}
1851 1852 1853 1854 1855
		}
		spin_unlock_irqrestore(&priv->lock, flags);
		break;
	default:
		break;
L
Linus Torvalds 已提交
1856 1857
	}

1858
}
L
Linus Torvalds 已提交
1859 1860 1861 1862 1863 1864 1865




/*****************************************************************************
******************************************************************************

1866
ThunderLAN driver adapter related routines
L
Linus Torvalds 已提交
1867 1868 1869 1870 1871

******************************************************************************
*****************************************************************************/


1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886
/***************************************************************
 *	tlan_reset_lists
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	The device structure with the list
 *			stuctures to be reset.
 *
 *	This routine sets the variables associated with managing
 *	the TLAN lists to their initial values.
 *
 **************************************************************/

static void tlan_reset_lists(struct net_device *dev)
L
Linus Torvalds 已提交
1887
{
1888
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1889
	int		i;
1890
	struct tlan_list	*list;
L
Linus Torvalds 已提交
1891 1892 1893
	dma_addr_t	list_phys;
	struct sk_buff	*skb;

1894 1895 1896 1897 1898
	priv->tx_head = 0;
	priv->tx_tail = 0;
	for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
		list = priv->tx_list + i;
		list->c_stat = TLAN_CSTAT_UNUSED;
1899
		list->buffer[0].address = 0;
L
Linus Torvalds 已提交
1900 1901 1902 1903 1904 1905
		list->buffer[2].count = 0;
		list->buffer[2].address = 0;
		list->buffer[8].address = 0;
		list->buffer[9].address = 0;
	}

1906 1907 1908 1909 1910 1911 1912
	priv->rx_head = 0;
	priv->rx_tail = TLAN_NUM_RX_LISTS - 1;
	for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
		list = priv->rx_list + i;
		list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i;
		list->c_stat = TLAN_CSTAT_READY;
		list->frame_size = TLAN_MAX_FRAME_SIZE;
L
Linus Torvalds 已提交
1913
		list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
1914
		skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
1915
		if (!skb) {
1916
			netdev_err(dev, "Out of memory for received data\n");
1917
			break;
L
Linus Torvalds 已提交
1918
		}
1919

1920
		list->buffer[0].address = pci_map_single(priv->pci_dev,
1921 1922 1923
							 skb->data,
							 TLAN_MAX_FRAME_SIZE,
							 PCI_DMA_FROMDEVICE);
1924
		tlan_store_skb(list, skb);
L
Linus Torvalds 已提交
1925 1926
		list->buffer[1].count = 0;
		list->buffer[1].address = 0;
1927
		list->forward = list_phys + sizeof(struct tlan_list);
1928 1929 1930 1931
	}

	/* in case ran out of memory early, clear bits */
	while (i < TLAN_NUM_RX_LISTS) {
1932
		tlan_store_skb(priv->rx_list + i, NULL);
1933
		++i;
L
Linus Torvalds 已提交
1934
	}
1935
	list->forward = 0;
L
Linus Torvalds 已提交
1936

1937
}
L
Linus Torvalds 已提交
1938 1939


1940
static void tlan_free_lists(struct net_device *dev)
L
Linus Torvalds 已提交
1941
{
1942
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
1943
	int		i;
1944
	struct tlan_list	*list;
L
Linus Torvalds 已提交
1945 1946
	struct sk_buff	*skb;

1947 1948 1949 1950
	for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
		list = priv->tx_list + i;
		skb = tlan_get_skb(list);
		if (skb) {
1951
			pci_unmap_single(
1952
				priv->pci_dev,
1953 1954 1955 1956
				list->buffer[0].address,
				max(skb->len,
				    (unsigned int)TLAN_MIN_FRAME_SIZE),
				PCI_DMA_TODEVICE);
1957
			dev_kfree_skb_any(skb);
1958 1959
			list->buffer[8].address = 0;
			list->buffer[9].address = 0;
L
Linus Torvalds 已提交
1960
		}
1961
	}
L
Linus Torvalds 已提交
1962

1963 1964 1965 1966 1967
	for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
		list = priv->rx_list + i;
		skb = tlan_get_skb(list);
		if (skb) {
			pci_unmap_single(priv->pci_dev,
1968 1969 1970
					 list->buffer[0].address,
					 TLAN_MAX_FRAME_SIZE,
					 PCI_DMA_FROMDEVICE);
1971
			dev_kfree_skb_any(skb);
1972 1973
			list->buffer[8].address = 0;
			list->buffer[9].address = 0;
L
Linus Torvalds 已提交
1974 1975
		}
	}
1976
}
L
Linus Torvalds 已提交
1977 1978 1979 1980




1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993
/***************************************************************
 *	tlan_print_dio
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		io_base		Base IO port of the device of
 *				which to print DIO registers.
 *
 *	This function prints out all the internal (DIO)
 *	registers of a TLAN chip.
 *
 **************************************************************/
L
Linus Torvalds 已提交
1994

1995
static void tlan_print_dio(u16 io_base)
L
Linus Torvalds 已提交
1996 1997 1998 1999
{
	u32 data0, data1;
	int	i;

2000 2001 2002
	pr_info("Contents of internal registers for io base 0x%04hx\n",
		io_base);
	pr_info("Off.  +0        +4\n");
2003 2004 2005
	for (i = 0; i < 0x4C; i += 8) {
		data0 = tlan_dio_read32(io_base, i);
		data1 = tlan_dio_read32(io_base, i + 0x4);
2006
		pr_info("0x%02x  0x%08x 0x%08x\n", i, data0, data1);
L
Linus Torvalds 已提交
2007 2008
	}

2009
}
L
Linus Torvalds 已提交
2010 2011 2012 2013




2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029
/***************************************************************
 *	TLan_PrintList
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		list	A pointer to the struct tlan_list structure to
 *			be printed.
 *		type	A string to designate type of list,
 *			"Rx" or "Tx".
 *		num	The index of the list.
 *
 *	This function prints out the contents of the list
 *	pointed to by the list parameter.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2030

2031
static void tlan_print_list(struct tlan_list *list, char *type, int num)
L
Linus Torvalds 已提交
2032 2033 2034
{
	int i;

2035 2036 2037 2038
	pr_info("%s List %d at %p\n", type, num, list);
	pr_info("   Forward    = 0x%08x\n",  list->forward);
	pr_info("   CSTAT      = 0x%04hx\n", list->c_stat);
	pr_info("   Frame Size = 0x%04hx\n", list->frame_size);
2039 2040
	/* for (i = 0; i < 10; i++) { */
	for (i = 0; i < 2; i++) {
2041 2042
		pr_info("   Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
			i, list->buffer[i].count, list->buffer[i].address);
L
Linus Torvalds 已提交
2043 2044
	}

2045
}
L
Linus Torvalds 已提交
2046 2047 2048 2049




2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066
/***************************************************************
 *	tlan_read_and_clear_stats
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	Pointer to device structure of adapter
 *			to which to read stats.
 *		record	Flag indicating whether to add
 *
 *	This functions reads all the internal status registers
 *	of the TLAN chip, which clears them as a side effect.
 *	It then either adds the values to the device's status
 *	struct, or discards them, depending on whether record
 *	is TLAN_RECORD (!=0)  or TLAN_IGNORE (==0).
 *
 **************************************************************/
L
Linus Torvalds 已提交
2067

2068
static void tlan_read_and_clear_stats(struct net_device *dev, int record)
L
Linus Torvalds 已提交
2069 2070 2071 2072 2073 2074 2075
{
	u32		tx_good, tx_under;
	u32		rx_good, rx_over;
	u32		def_tx, crc, code;
	u32		multi_col, single_col;
	u32		excess_col, late_col, loss;

2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105
	outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR);
	tx_good  = inb(dev->base_addr + TLAN_DIO_DATA);
	tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
	tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
	tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3);

	outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR);
	rx_good  = inb(dev->base_addr + TLAN_DIO_DATA);
	rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
	rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
	rx_over  = inb(dev->base_addr + TLAN_DIO_DATA + 3);

	outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR);
	def_tx  = inb(dev->base_addr + TLAN_DIO_DATA);
	def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
	crc     = inb(dev->base_addr + TLAN_DIO_DATA + 2);
	code    = inb(dev->base_addr + TLAN_DIO_DATA + 3);

	outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
	multi_col   = inb(dev->base_addr + TLAN_DIO_DATA);
	multi_col  += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
	single_col  = inb(dev->base_addr + TLAN_DIO_DATA + 2);
	single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8;

	outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
	excess_col = inb(dev->base_addr + TLAN_DIO_DATA);
	late_col   = inb(dev->base_addr + TLAN_DIO_DATA + 1);
	loss       = inb(dev->base_addr + TLAN_DIO_DATA + 2);

	if (record) {
S
Stephen Hemminger 已提交
2106 2107 2108 2109
		dev->stats.rx_packets += rx_good;
		dev->stats.rx_errors  += rx_over + crc + code;
		dev->stats.tx_packets += tx_good;
		dev->stats.tx_errors  += tx_under + loss;
2110 2111
		dev->stats.collisions += multi_col
			+ single_col + excess_col + late_col;
S
Stephen Hemminger 已提交
2112 2113 2114 2115 2116 2117 2118

		dev->stats.rx_over_errors    += rx_over;
		dev->stats.rx_crc_errors     += crc;
		dev->stats.rx_frame_errors   += code;

		dev->stats.tx_aborted_errors += tx_under;
		dev->stats.tx_carrier_errors += loss;
L
Linus Torvalds 已提交
2119
	}
2120

2121
}
L
Linus Torvalds 已提交
2122 2123 2124 2125




2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141
/***************************************************************
 *	TLan_Reset
 *
 *	Returns:
 *		0
 *	Parms:
 *		dev	Pointer to device structure of adapter
 *			to be reset.
 *
 *	This function resets the adapter and it's physical
 *	device.  See Chap. 3, pp. 9-10 of the "ThunderLAN
 *	Programmer's Guide" for details.  The routine tries to
 *	implement what is detailed there, though adjustments
 *	have been made.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2142

2143
static void
2144
tlan_reset_adapter(struct net_device *dev)
L
Linus Torvalds 已提交
2145
{
2146
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2147 2148 2149 2150 2151
	int		i;
	u32		addr;
	u32		data;
	u8		data8;

2152 2153
	priv->tlan_full_duplex = false;
	priv->phy_online = 0;
L
Linus Torvalds 已提交
2154 2155 2156 2157 2158 2159 2160
	netif_carrier_off(dev);

/*  1.	Assert reset bit. */

	data = inl(dev->base_addr + TLAN_HOST_CMD);
	data |= TLAN_HC_AD_RST;
	outl(data, dev->base_addr + TLAN_HOST_CMD);
2161

L
Linus Torvalds 已提交
2162 2163
	udelay(1000);

2164
/*  2.	Turn off interrupts. (Probably isn't necessary) */
L
Linus Torvalds 已提交
2165 2166 2167 2168 2169 2170 2171

	data = inl(dev->base_addr + TLAN_HOST_CMD);
	data |= TLAN_HC_INT_OFF;
	outl(data, dev->base_addr + TLAN_HOST_CMD);

/*  3.	Clear AREGs and HASHs. */

2172 2173
	for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4)
		tlan_dio_write32(dev->base_addr, (u16) i, 0);
L
Linus Torvalds 已提交
2174 2175 2176 2177

/*  4.	Setup NetConfig register. */

	data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
2178
	tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
L
Linus Torvalds 已提交
2179 2180 2181

/*  5.	Load Ld_Tmr and Ld_Thr in HOST_CMD. */

2182 2183
	outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD);
	outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD);
L
Linus Torvalds 已提交
2184 2185 2186

/*  6.	Unreset the MII by setting NMRST (in NetSio) to 1. */

2187
	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
2188
	addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2189
	tlan_set_bit(TLAN_NET_SIO_NMRST, addr);
L
Linus Torvalds 已提交
2190 2191 2192

/*  7.	Setup the remaining registers. */

2193
	if (priv->tlan_rev >= 0x30) {
L
Linus Torvalds 已提交
2194
		data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
2195
		tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8);
L
Linus Torvalds 已提交
2196
	}
2197
	tlan_phy_detect(dev);
L
Linus Torvalds 已提交
2198
	data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
2199

2200
	if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) {
L
Linus Torvalds 已提交
2201
		data |= TLAN_NET_CFG_BIT;
2202 2203 2204 2205 2206
		if (priv->aui == 1) {
			tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a);
		} else if (priv->duplex == TLAN_DUPLEX_FULL) {
			tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00);
			priv->tlan_full_duplex = true;
L
Linus Torvalds 已提交
2207
		} else {
2208
			tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08);
L
Linus Torvalds 已提交
2209 2210 2211
		}
	}

2212
	if (priv->phy_num == 0)
L
Linus Torvalds 已提交
2213
		data |= TLAN_NET_CFG_PHY_EN;
2214
	tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
L
Linus Torvalds 已提交
2215

2216 2217 2218 2219
	if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY)
		tlan_finish_reset(dev);
	else
		tlan_phy_power_down(dev);
L
Linus Torvalds 已提交
2220

2221
}
L
Linus Torvalds 已提交
2222 2223 2224 2225




2226
static void
2227
tlan_finish_reset(struct net_device *dev)
L
Linus Torvalds 已提交
2228
{
2229
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2230 2231 2232 2233 2234 2235
	u8		data;
	u32		phy;
	u8		sio;
	u16		status;
	u16		partner;
	u16		tlphy_ctl;
2236
	u16		tlphy_par;
L
Linus Torvalds 已提交
2237
	u16		tlphy_id1, tlphy_id2;
2238
	int		i;
L
Linus Torvalds 已提交
2239

2240
	phy = priv->phy[priv->phy_num];
L
Linus Torvalds 已提交
2241 2242

	data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
2243
	if (priv->tlan_full_duplex)
L
Linus Torvalds 已提交
2244
		data |= TLAN_NET_CMD_DUPLEX;
2245
	tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data);
2246
	data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
2247
	if (priv->phy_num == 0)
2248
		data |= TLAN_NET_MASK_MASK7;
2249 2250 2251 2252
	tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data);
	tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7);
	tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1);
	tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2);
2253

2254 2255
	if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) ||
	    (priv->aui)) {
L
Linus Torvalds 已提交
2256
		status = MII_GS_LINK;
2257
		netdev_info(dev, "Link forced\n");
L
Linus Torvalds 已提交
2258
	} else {
2259 2260 2261 2262 2263 2264 2265 2266 2267 2268
		tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
		udelay(1000);
		tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
		if ((status & MII_GS_LINK) &&
		    /* We only support link info on Nat.Sem. PHY's */
		    (tlphy_id1 == NAT_SEM_ID1) &&
		    (tlphy_id2 == NAT_SEM_ID2)) {
			tlan_mii_read_reg(dev, phy, MII_AN_LPA, &partner);
			tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, &tlphy_par);

2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283
			netdev_info(dev,
				    "Link active with %s %uMbps %s-Duplex\n",
				    !(tlphy_par & TLAN_PHY_AN_EN_STAT)
				    ? "forced" : "Autonegotiation enabled,",
				    tlphy_par & TLAN_PHY_SPEED_100
				    ? 100 : 10,
				    tlphy_par & TLAN_PHY_DUPLEX_FULL
				    ? "Full" : "Half");

			if (tlphy_par & TLAN_PHY_AN_EN_STAT) {
				netdev_info(dev, "Partner capability:");
				for (i = 5; i < 10; i++)
					if (partner & (1 << i))
						pr_cont(" %s", media[i-5]);
				pr_cont("\n");
L
Linus Torvalds 已提交
2284 2285
			}

2286 2287
			tlan_dio_write8(dev->base_addr, TLAN_LED_REG,
					TLAN_LED_LINK);
2288
#ifdef MONITOR
L
Linus Torvalds 已提交
2289
			/* We have link beat..for now anyway */
2290 2291 2292
			priv->link = 1;
			/*Enabling link beat monitoring */
			tlan_set_timer(dev, (10*HZ), TLAN_TIMER_LINK_BEAT);
2293
#endif
L
Linus Torvalds 已提交
2294
		} else if (status & MII_GS_LINK)  {
2295
			netdev_info(dev, "Link active\n");
2296 2297
			tlan_dio_write8(dev->base_addr, TLAN_LED_REG,
					TLAN_LED_LINK);
L
Linus Torvalds 已提交
2298 2299 2300
		}
	}

2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318
	if (priv->phy_num == 0) {
		tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
		tlphy_ctl |= TLAN_TC_INTEN;
		tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
		sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO);
		sio |= TLAN_NET_SIO_MINTEN;
		tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio);
	}

	if (status & MII_GS_LINK) {
		tlan_set_mac(dev, 0, dev->dev_addr);
		priv->phy_online = 1;
		outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1);
		if (debug >= 1 && debug != TLAN_DEBUG_PROBE)
			outb((TLAN_HC_REQ_INT >> 8),
			     dev->base_addr + TLAN_HOST_CMD + 1);
		outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM);
		outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD);
L
Linus Torvalds 已提交
2319 2320
		netif_carrier_on(dev);
	} else {
2321
		netdev_info(dev, "Link inactive, will retry in 10 secs...\n");
2322
		tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET);
L
Linus Torvalds 已提交
2323 2324
		return;
	}
2325
	tlan_set_multicast_list(dev);
L
Linus Torvalds 已提交
2326

2327
}
L
Linus Torvalds 已提交
2328 2329 2330 2331




2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351
/***************************************************************
 *	tlan_set_mac
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	Pointer to device structure of adapter
 *			on which to change the AREG.
 *		areg	The AREG to set the address in (0 - 3).
 *		mac	A pointer to an array of chars.  Each
 *			element stores one byte of the address.
 *			IE, it isn't in ascii.
 *
 *	This function transfers a MAC address to one of the
 *	TLAN AREGs (address registers).  The TLAN chip locks
 *	the register on writing to offset 0 and unlocks the
 *	register after writing to offset 5.  If NULL is passed
 *	in mac, then the AREG is filled with 0's.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2352

2353
static void tlan_set_mac(struct net_device *dev, int areg, char *mac)
L
Linus Torvalds 已提交
2354 2355
{
	int i;
2356

L
Linus Torvalds 已提交
2357 2358
	areg *= 6;

2359 2360 2361 2362
	if (mac != NULL) {
		for (i = 0; i < 6; i++)
			tlan_dio_write8(dev->base_addr,
					TLAN_AREG_0 + areg + i, mac[i]);
L
Linus Torvalds 已提交
2363
	} else {
2364 2365 2366
		for (i = 0; i < 6; i++)
			tlan_dio_write8(dev->base_addr,
					TLAN_AREG_0 + areg + i, 0);
L
Linus Torvalds 已提交
2367 2368
	}

2369
}
L
Linus Torvalds 已提交
2370 2371 2372 2373 2374 2375 2376




/*****************************************************************************
******************************************************************************

2377
ThunderLAN driver PHY layer routines
L
Linus Torvalds 已提交
2378 2379 2380 2381 2382 2383

******************************************************************************
*****************************************************************************/



2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395
/*********************************************************************
 *	tlan_phy_print
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	A pointer to the device structure of the
 *			TLAN device having the PHYs to be detailed.
 *
 *	This function prints the registers a PHY (aka transceiver).
 *
 ********************************************************************/
L
Linus Torvalds 已提交
2396

2397
static void tlan_phy_print(struct net_device *dev)
L
Linus Torvalds 已提交
2398
{
2399
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2400 2401
	u16 i, data0, data1, data2, data3, phy;

2402 2403 2404
	phy = priv->phy[priv->phy_num];

	if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
2405
		netdev_info(dev, "Unmanaged PHY\n");
2406
	} else if (phy <= TLAN_PHY_MAX_ADDR) {
2407 2408
		netdev_info(dev, "PHY 0x%02x\n", phy);
		pr_info("   Off.  +0     +1     +2     +3\n");
2409 2410 2411 2412 2413
		for (i = 0; i < 0x20; i += 4) {
			tlan_mii_read_reg(dev, phy, i, &data0);
			tlan_mii_read_reg(dev, phy, i + 1, &data1);
			tlan_mii_read_reg(dev, phy, i + 2, &data2);
			tlan_mii_read_reg(dev, phy, i + 3, &data3);
2414 2415
			pr_info("   0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n",
				i, data0, data1, data2, data3);
L
Linus Torvalds 已提交
2416 2417
		}
	} else {
2418
		netdev_info(dev, "Invalid PHY\n");
L
Linus Torvalds 已提交
2419 2420
	}

2421
}
L
Linus Torvalds 已提交
2422 2423 2424 2425




2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441
/*********************************************************************
 *	tlan_phy_detect
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev	A pointer to the device structure of the adapter
 *			for which the PHY needs determined.
 *
 *	So far I've found that adapters which have external PHYs
 *	may also use the internal PHY for part of the functionality.
 *	(eg, AUI/Thinnet).  This function finds out if this TLAN
 *	chip has an internal PHY, and then finds the first external
 *	PHY (starting from address 0) if it exists).
 *
 ********************************************************************/
L
Linus Torvalds 已提交
2442

2443
static void tlan_phy_detect(struct net_device *dev)
L
Linus Torvalds 已提交
2444
{
2445
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2446 2447 2448 2449 2450
	u16		control;
	u16		hi;
	u16		lo;
	u32		phy;

2451 2452
	if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
		priv->phy_num = 0xffff;
L
Linus Torvalds 已提交
2453 2454 2455
		return;
	}

2456
	tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi);
2457

2458
	if (hi != 0xffff)
L
Linus Torvalds 已提交
2459
		priv->phy[0] = TLAN_PHY_MAX_ADDR;
2460
	else
L
Linus Torvalds 已提交
2461 2462 2463
		priv->phy[0] = TLAN_PHY_NONE;

	priv->phy[1] = TLAN_PHY_NONE;
2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474
	for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) {
		tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control);
		tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi);
		tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo);
		if ((control != 0xffff) ||
		    (hi != 0xffff) || (lo != 0xffff)) {
			TLAN_DBG(TLAN_DEBUG_GNRL,
				 "PHY found at %02x %04x %04x %04x\n",
				 phy, control, hi, lo);
			if ((priv->phy[1] == TLAN_PHY_NONE) &&
			    (phy != TLAN_PHY_MAX_ADDR)) {
L
Linus Torvalds 已提交
2475 2476 2477 2478 2479
				priv->phy[1] = phy;
			}
		}
	}

2480 2481 2482 2483 2484
	if (priv->phy[1] != TLAN_PHY_NONE)
		priv->phy_num = 1;
	else if (priv->phy[0] != TLAN_PHY_NONE)
		priv->phy_num = 0;
	else
2485
		netdev_info(dev, "Cannot initialize device, no PHY was found!\n");
L
Linus Torvalds 已提交
2486

2487
}
L
Linus Torvalds 已提交
2488 2489 2490 2491




2492
static void tlan_phy_power_down(struct net_device *dev)
L
Linus Torvalds 已提交
2493
{
2494
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2495 2496
	u16		value;

2497
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name);
L
Linus Torvalds 已提交
2498
	value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
2499 2500 2501 2502 2503 2504 2505
	tlan_mii_sync(dev->base_addr);
	tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
	if ((priv->phy_num == 0) &&
	    (priv->phy[1] != TLAN_PHY_NONE) &&
	    (!(priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10))) {
		tlan_mii_sync(dev->base_addr);
		tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value);
L
Linus Torvalds 已提交
2506 2507 2508 2509 2510 2511
	}

	/* Wait for 50 ms and powerup
	 * This is abitrary.  It is intended to make sure the
	 * transceiver settles.
	 */
2512
	tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_PUP);
L
Linus Torvalds 已提交
2513

2514
}
L
Linus Torvalds 已提交
2515 2516 2517 2518




2519
static void tlan_phy_power_up(struct net_device *dev)
L
Linus Torvalds 已提交
2520
{
2521
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2522 2523
	u16		value;

2524 2525
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name);
	tlan_mii_sync(dev->base_addr);
L
Linus Torvalds 已提交
2526
	value = MII_GC_LOOPBK;
2527 2528
	tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
	tlan_mii_sync(dev->base_addr);
L
Linus Torvalds 已提交
2529 2530 2531 2532
	/* Wait for 500 ms and reset the
	 * transceiver.  The TLAN docs say both 50 ms and
	 * 500 ms, so do the longer, just in case.
	 */
2533
	tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_RESET);
L
Linus Torvalds 已提交
2534

2535
}
L
Linus Torvalds 已提交
2536 2537 2538 2539




2540
static void tlan_phy_reset(struct net_device *dev)
L
Linus Torvalds 已提交
2541
{
2542
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2543 2544 2545
	u16		phy;
	u16		value;

2546
	phy = priv->phy[priv->phy_num];
L
Linus Torvalds 已提交
2547

M
Masanari Iida 已提交
2548
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name);
2549
	tlan_mii_sync(dev->base_addr);
L
Linus Torvalds 已提交
2550
	value = MII_GC_LOOPBK | MII_GC_RESET;
2551 2552 2553 2554
	tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value);
	tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value);
	while (value & MII_GC_RESET)
		tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value);
L
Linus Torvalds 已提交
2555 2556 2557 2558 2559

	/* Wait for 500 ms and initialize.
	 * I don't remember why I wait this long.
	 * I've changed this to 50ms, as it seems long enough.
	 */
2560
	tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_START_LINK);
L
Linus Torvalds 已提交
2561

2562
}
L
Linus Torvalds 已提交
2563 2564 2565 2566




2567
static void tlan_phy_start_link(struct net_device *dev)
L
Linus Torvalds 已提交
2568
{
2569
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2570 2571 2572 2573 2574 2575 2576
	u16		ability;
	u16		control;
	u16		data;
	u16		phy;
	u16		status;
	u16		tctl;

2577 2578 2579 2580
	phy = priv->phy[priv->phy_num];
	TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name);
	tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
	tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability);
L
Linus Torvalds 已提交
2581

2582 2583
	if ((status & MII_GS_AUTONEG) &&
	    (!priv->aui)) {
L
Linus Torvalds 已提交
2584
		ability = status >> 11;
2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598
		if (priv->speed  == TLAN_SPEED_10 &&
		    priv->duplex == TLAN_DUPLEX_HALF) {
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000);
		} else if (priv->speed == TLAN_SPEED_10 &&
			   priv->duplex == TLAN_DUPLEX_FULL) {
			priv->tlan_full_duplex = true;
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100);
		} else if (priv->speed == TLAN_SPEED_100 &&
			   priv->duplex == TLAN_DUPLEX_HALF) {
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000);
		} else if (priv->speed == TLAN_SPEED_100 &&
			   priv->duplex == TLAN_DUPLEX_FULL) {
			priv->tlan_full_duplex = true;
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100);
L
Linus Torvalds 已提交
2599
		} else {
2600

L
Linus Torvalds 已提交
2601
			/* Set Auto-Neg advertisement */
2602 2603
			tlan_mii_write_reg(dev, phy, MII_AN_ADV,
					   (ability << 5) | 1);
L
Linus Torvalds 已提交
2604
			/* Enablee Auto-Neg */
2605
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000);
L
Linus Torvalds 已提交
2606
			/* Restart Auto-Neg */
2607
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200);
L
Linus Torvalds 已提交
2608
			/* Wait for 4 sec for autonegotiation
2609 2610 2611 2612
			 * to complete.  The max spec time is less than this
			 * but the card need additional time to start AN.
			 * .5 sec should be plenty extra.
			 */
2613
			netdev_info(dev, "Starting autonegotiation\n");
2614
			tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN);
L
Linus Torvalds 已提交
2615 2616
			return;
		}
2617 2618 2619

	}

2620 2621 2622 2623 2624 2625
	if ((priv->aui) && (priv->phy_num != 0)) {
		priv->phy_num = 0;
		data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN
			| TLAN_NET_CFG_PHY_EN;
		tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data);
		tlan_set_timer(dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN);
L
Linus Torvalds 已提交
2626
		return;
2627
	} else if (priv->phy_num == 0) {
L
Linus Torvalds 已提交
2628
		control = 0;
2629 2630 2631
		tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl);
		if (priv->aui) {
			tctl |= TLAN_TC_AUISEL;
2632
		} else {
2633 2634
			tctl &= ~TLAN_TC_AUISEL;
			if (priv->duplex == TLAN_DUPLEX_FULL) {
L
Linus Torvalds 已提交
2635
				control |= MII_GC_DUPLEX;
2636
				priv->tlan_full_duplex = true;
L
Linus Torvalds 已提交
2637
			}
2638
			if (priv->speed == TLAN_SPEED_100)
L
Linus Torvalds 已提交
2639 2640
				control |= MII_GC_SPEEDSEL;
		}
2641 2642
		tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control);
		tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl);
L
Linus Torvalds 已提交
2643 2644 2645 2646 2647
	}

	/* Wait for 2 sec to give the transceiver time
	 * to establish link.
	 */
2648
	tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET);
L
Linus Torvalds 已提交
2649

2650
}
L
Linus Torvalds 已提交
2651 2652 2653 2654




2655
static void tlan_phy_finish_auto_neg(struct net_device *dev)
L
Linus Torvalds 已提交
2656
{
2657
	struct tlan_priv	*priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2658 2659 2660 2661 2662 2663
	u16		an_adv;
	u16		an_lpa;
	u16		data;
	u16		mode;
	u16		phy;
	u16		status;
2664

2665
	phy = priv->phy[priv->phy_num];
L
Linus Torvalds 已提交
2666

2667 2668 2669
	tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
	udelay(1000);
	tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
L
Linus Torvalds 已提交
2670

2671
	if (!(status & MII_GS_AUTOCMPLT)) {
L
Linus Torvalds 已提交
2672 2673 2674
		/* Wait for 8 sec to give the process
		 * more time.  Perhaps we should fail after a while.
		 */
2675
		if (!priv->neg_be_verbose++) {
2676 2677 2678 2679
			pr_info("Giving autonegotiation more time.\n");
			pr_info("Please check that your adapter has\n");
			pr_info("been properly connected to a HUB or Switch.\n");
			pr_info("Trying to establish link in the background...\n");
2680 2681
		}
		tlan_set_timer(dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN);
L
Linus Torvalds 已提交
2682 2683 2684
		return;
	}

2685
	netdev_info(dev, "Autonegotiation complete\n");
2686 2687
	tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv);
	tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa);
L
Linus Torvalds 已提交
2688
	mode = an_adv & an_lpa & 0x03E0;
2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701
	if (mode & 0x0100)
		priv->tlan_full_duplex = true;
	else if (!(mode & 0x0080) && (mode & 0x0040))
		priv->tlan_full_duplex = true;

	if ((!(mode & 0x0180)) &&
	    (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) &&
	    (priv->phy_num != 0)) {
		priv->phy_num = 0;
		data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN
			| TLAN_NET_CFG_PHY_EN;
		tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data);
		tlan_set_timer(dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN);
L
Linus Torvalds 已提交
2702 2703 2704
		return;
	}

2705 2706 2707 2708 2709
	if (priv->phy_num == 0) {
		if ((priv->duplex == TLAN_DUPLEX_FULL) ||
		    (an_adv & an_lpa & 0x0040)) {
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
					   MII_GC_AUTOENB | MII_GC_DUPLEX);
2710
			netdev_info(dev, "Starting internal PHY with FULL-DUPLEX\n");
L
Linus Torvalds 已提交
2711
		} else {
2712 2713
			tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
					   MII_GC_AUTOENB);
2714
			netdev_info(dev, "Starting internal PHY with HALF-DUPLEX\n");
L
Linus Torvalds 已提交
2715 2716 2717 2718 2719
		}
	}

	/* Wait for 100 ms.  No reason in partiticular.
	 */
2720
	tlan_set_timer(dev, (HZ/10), TLAN_TIMER_FINISH_RESET);
2721

2722
}
L
Linus Torvalds 已提交
2723 2724 2725

#ifdef MONITOR

2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744
/*********************************************************************
 *
 *     tlan_phy_monitor
 *
 *     Returns:
 *	      None
 *
 *     Params:
 *	      dev	     The device structure of this device.
 *
 *
 *     This function monitors PHY condition by reading the status
 *     register via the MII bus. This can be used to give info
 *     about link changes (up/down), and possible switch to alternate
 *     media.
 *
 *******************************************************************/

void tlan_phy_monitor(struct net_device *dev)
L
Linus Torvalds 已提交
2745
{
2746
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2747 2748 2749
	u16     phy;
	u16     phy_status;

2750
	phy = priv->phy[priv->phy_num];
L
Linus Torvalds 已提交
2751

2752 2753
	/* Get PHY status register */
	tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status);
L
Linus Torvalds 已提交
2754

2755 2756 2757 2758 2759 2760 2761 2762 2763
	/* Check if link has been lost */
	if (!(phy_status & MII_GS_LINK)) {
		if (priv->link) {
			priv->link = 0;
			printk(KERN_DEBUG "TLAN: %s has lost link\n",
			       dev->name);
			netif_carrier_off(dev);
			tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT);
			return;
L
Linus Torvalds 已提交
2764 2765 2766
		}
	}

2767 2768 2769 2770 2771
	/* Link restablished? */
	if ((phy_status & MII_GS_LINK) && !priv->link) {
		priv->link = 1;
		printk(KERN_DEBUG "TLAN: %s has reestablished link\n",
		       dev->name);
2772
		netif_carrier_on(dev);
2773
	}
L
Linus Torvalds 已提交
2774 2775

	/* Setup a new monitor */
2776
	tlan_set_timer(dev, (2*HZ), TLAN_TIMER_LINK_BEAT);
2777
}
L
Linus Torvalds 已提交
2778 2779 2780 2781 2782 2783 2784

#endif /* MONITOR */


/*****************************************************************************
******************************************************************************

2785
ThunderLAN driver MII routines
L
Linus Torvalds 已提交
2786

2787 2788
these routines are based on the information in chap. 2 of the
"ThunderLAN Programmer's Guide", pp. 15-24.
L
Linus Torvalds 已提交
2789 2790 2791 2792 2793

******************************************************************************
*****************************************************************************/


2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819
/***************************************************************
 *	tlan_mii_read_reg
 *
 *	Returns:
 *		false	if ack received ok
 *		true	if no ack received or other error
 *
 *	Parms:
 *		dev		The device structure containing
 *				The io address and interrupt count
 *				for this device.
 *		phy		The address of the PHY to be queried.
 *		reg		The register whose contents are to be
 *				retrieved.
 *		val		A pointer to a variable to store the
 *				retrieved value.
 *
 *	This function uses the TLAN's MII bus to retrieve the contents
 *	of a given register on a PHY.  It sends the appropriate info
 *	and then reads the 16-bit register value from the MII bus via
 *	the TLAN SIO register.
 *
 **************************************************************/

static bool
tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val)
L
Linus Torvalds 已提交
2820 2821 2822
{
	u8	nack;
	u16	sio, tmp;
2823
	u32	i;
2824
	bool	err;
L
Linus Torvalds 已提交
2825
	int	minten;
2826
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2827 2828
	unsigned long flags = 0;

2829
	err = false;
L
Linus Torvalds 已提交
2830 2831
	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
	sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
2832

L
Linus Torvalds 已提交
2833 2834 2835
	if (!in_irq())
		spin_lock_irqsave(&priv->lock, flags);

2836
	tlan_mii_sync(dev->base_addr);
L
Linus Torvalds 已提交
2837

2838 2839 2840
	minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
	if (minten)
		tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
L
Linus Torvalds 已提交
2841

2842 2843 2844 2845
	tlan_mii_send_data(dev->base_addr, 0x1, 2);	/* start (01b) */
	tlan_mii_send_data(dev->base_addr, 0x2, 2);	/* read  (10b) */
	tlan_mii_send_data(dev->base_addr, phy, 5);	/* device #      */
	tlan_mii_send_data(dev->base_addr, reg, 5);	/* register #    */
L
Linus Torvalds 已提交
2846 2847


2848
	tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio);	/* change direction */
L
Linus Torvalds 已提交
2849

2850 2851 2852
	tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);		/* clock idle bit */
	tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
	tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);		/* wait 300ns */
L
Linus Torvalds 已提交
2853

2854 2855 2856
	nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio);	/* check for ACK */
	tlan_set_bit(TLAN_NET_SIO_MCLK, sio);		/* finish ACK */
	if (nack) {					/* no ACK, so fake it */
L
Linus Torvalds 已提交
2857
		for (i = 0; i < 16; i++) {
2858 2859
			tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
			tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
2860 2861
		}
		tmp = 0xffff;
2862
		err = true;
L
Linus Torvalds 已提交
2863 2864
	} else {					/* ACK, so read data */
		for (tmp = 0, i = 0x8000; i; i >>= 1) {
2865 2866
			tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
			if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio))
L
Linus Torvalds 已提交
2867
				tmp |= i;
2868
			tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
2869 2870 2871 2872
		}
	}


2873 2874
	tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);		/* idle cycle */
	tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
2875

2876 2877
	if (minten)
		tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
L
Linus Torvalds 已提交
2878 2879

	*val = tmp;
2880

L
Linus Torvalds 已提交
2881 2882 2883 2884 2885
	if (!in_irq())
		spin_unlock_irqrestore(&priv->lock, flags);

	return err;

2886
}
L
Linus Torvalds 已提交
2887 2888 2889 2890




2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907
/***************************************************************
 *	tlan_mii_send_data
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		base_port	The base IO port of the adapter	in
 *				question.
 *		dev		The address of the PHY to be queried.
 *		data		The value to be placed on the MII bus.
 *		num_bits	The number of bits in data that are to
 *				be placed on the MII bus.
 *
 *	This function sends on sequence of bits on the MII
 *	configuration bus.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2908

2909
static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits)
L
Linus Torvalds 已提交
2910 2911 2912 2913
{
	u16 sio;
	u32 i;

2914
	if (num_bits == 0)
L
Linus Torvalds 已提交
2915 2916
		return;

2917
	outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
2918
	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
2919
	tlan_set_bit(TLAN_NET_SIO_MTXEN, sio);
L
Linus Torvalds 已提交
2920

2921 2922 2923 2924 2925
	for (i = (0x1 << (num_bits - 1)); i; i >>= 1) {
		tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
		(void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
		if (data & i)
			tlan_set_bit(TLAN_NET_SIO_MDATA, sio);
L
Linus Torvalds 已提交
2926
		else
2927 2928 2929
			tlan_clear_bit(TLAN_NET_SIO_MDATA, sio);
		tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
		(void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
2930 2931
	}

2932
}
L
Linus Torvalds 已提交
2933 2934 2935 2936




2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949
/***************************************************************
 *	TLan_MiiSync
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		base_port	The base IO port of the adapter in
 *				question.
 *
 *	This functions syncs all PHYs in terms of the MII configuration
 *	bus.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2950

2951
static void tlan_mii_sync(u16 base_port)
L
Linus Torvalds 已提交
2952 2953 2954 2955
{
	int i;
	u16 sio;

2956
	outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
2957 2958
	sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;

2959 2960 2961 2962
	tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio);
	for (i = 0; i < 32; i++) {
		tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
		tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
2963 2964
	}

2965
}
L
Linus Torvalds 已提交
2966 2967 2968 2969




2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988
/***************************************************************
 *	tlan_mii_write_reg
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		dev		The device structure for the device
 *				to write to.
 *		phy		The address of the PHY to be written to.
 *		reg		The register whose contents are to be
 *				written.
 *		val		The value to be written to the register.
 *
 *	This function uses the TLAN's MII bus to write the contents of a
 *	given register on a PHY.  It sends the appropriate info and then
 *	writes the 16-bit register value from the MII configuration bus
 *	via the TLAN SIO register.
 *
 **************************************************************/
L
Linus Torvalds 已提交
2989

2990 2991
static void
tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val)
L
Linus Torvalds 已提交
2992 2993 2994 2995
{
	u16	sio;
	int	minten;
	unsigned long flags = 0;
2996
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
2997 2998 2999

	outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
	sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
3000

L
Linus Torvalds 已提交
3001 3002 3003
	if (!in_irq())
		spin_lock_irqsave(&priv->lock, flags);

3004
	tlan_mii_sync(dev->base_addr);
L
Linus Torvalds 已提交
3005

3006 3007 3008
	minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
	if (minten)
		tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
L
Linus Torvalds 已提交
3009

3010 3011 3012 3013
	tlan_mii_send_data(dev->base_addr, 0x1, 2);	/* start (01b) */
	tlan_mii_send_data(dev->base_addr, 0x1, 2);	/* write (01b) */
	tlan_mii_send_data(dev->base_addr, phy, 5);	/* device #      */
	tlan_mii_send_data(dev->base_addr, reg, 5);	/* register #    */
L
Linus Torvalds 已提交
3014

3015 3016
	tlan_mii_send_data(dev->base_addr, 0x2, 2);	/* send ACK */
	tlan_mii_send_data(dev->base_addr, val, 16);	/* send data */
L
Linus Torvalds 已提交
3017

3018 3019
	tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);	/* idle cycle */
	tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
L
Linus Torvalds 已提交
3020

3021 3022
	if (minten)
		tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
3023

L
Linus Torvalds 已提交
3024 3025 3026
	if (!in_irq())
		spin_unlock_irqrestore(&priv->lock, flags);

3027
}
L
Linus Torvalds 已提交
3028 3029 3030 3031 3032 3033 3034




/*****************************************************************************
******************************************************************************

3035
ThunderLAN driver eeprom routines
L
Linus Torvalds 已提交
3036

3037 3038 3039 3040
the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A
EEPROM.  these functions are based on information in microchip's
data sheet.  I don't know how well this functions will work with
other Eeproms.
L
Linus Torvalds 已提交
3041 3042 3043 3044 3045

******************************************************************************
*****************************************************************************/


3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061
/***************************************************************
 *	tlan_ee_send_start
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		io_base		The IO port base address for the
 *				TLAN device with the EEPROM to
 *				use.
 *
 *	This function sends a start cycle to an EEPROM attached
 *	to a TLAN chip.
 *
 **************************************************************/

static void tlan_ee_send_start(u16 io_base)
L
Linus Torvalds 已提交
3062 3063 3064
{
	u16	sio;

3065
	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
3066 3067
	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;

3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101
	tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
	tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
	tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
	tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
	tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);

}




/***************************************************************
 *	tlan_ee_send_byte
 *
 *	Returns:
 *		If the correct ack was received, 0, otherwise 1
 *	Parms:	io_base		The IO port base address for the
 *				TLAN device with the EEPROM to
 *				use.
 *		data		The 8 bits of information to
 *				send to the EEPROM.
 *		stop		If TLAN_EEPROM_STOP is passed, a
 *				stop cycle is sent after the
 *				byte is sent after the ack is
 *				read.
 *
 *	This function sends a byte on the serial EEPROM line,
 *	driving the clock to send each bit. The function then
 *	reverses transmission direction and reads an acknowledge
 *	bit.
 *
 **************************************************************/

static int tlan_ee_send_byte(u16 io_base, u8 data, int stop)
L
Linus Torvalds 已提交
3102 3103 3104 3105 3106
{
	int	err;
	u8	place;
	u16	sio;

3107
	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
3108 3109 3110
	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;

	/* Assume clock is low, tx is enabled; */
3111 3112 3113
	for (place = 0x80; place != 0; place >>= 1) {
		if (place & data)
			tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
L
Linus Torvalds 已提交
3114
		else
3115 3116 3117
			tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
L
Linus Torvalds 已提交
3118
	}
3119 3120 3121 3122 3123
	tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
	tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
	err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio);
	tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
	tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
L
Linus Torvalds 已提交
3124

3125
	if ((!err) && stop) {
S
Stephen Hemminger 已提交
3126
		/* STOP, raise data while clock is high */
3127 3128 3129
		tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
L
Linus Torvalds 已提交
3130 3131
	}

3132
	return err;
L
Linus Torvalds 已提交
3133

3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163
}




/***************************************************************
 *	tlan_ee_receive_byte
 *
 *	Returns:
 *		Nothing
 *	Parms:
 *		io_base		The IO port base address for the
 *				TLAN device with the EEPROM to
 *				use.
 *		data		An address to a char to hold the
 *				data sent from the EEPROM.
 *		stop		If TLAN_EEPROM_STOP is passed, a
 *				stop cycle is sent after the
 *				byte is received, and no ack is
 *				sent.
 *
 *	This function receives 8 bits of data from the EEPROM
 *	over the serial link.  It then sends and ack bit, or no
 *	ack and a stop bit.  This function is used to retrieve
 *	data after the address of a byte in the EEPROM has been
 *	sent.
 *
 **************************************************************/

static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop)
L
Linus Torvalds 已提交
3164 3165 3166 3167
{
	u8  place;
	u16 sio;

3168
	outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
L
Linus Torvalds 已提交
3169 3170 3171 3172
	sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
	*data = 0;

	/* Assume clock is low, tx is enabled; */
3173 3174 3175 3176
	tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
	for (place = 0x80; place; place >>= 1) {
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio))
L
Linus Torvalds 已提交
3177
			*data |= place;
3178
		tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
L
Linus Torvalds 已提交
3179 3180
	}

3181 3182 3183 3184 3185
	tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
	if (!stop) {
		tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
L
Linus Torvalds 已提交
3186
	} else {
3187 3188 3189
		tlan_set_bit(TLAN_NET_SIO_EDATA, sio);	/* no ack = 1 (?) */
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
S
Stephen Hemminger 已提交
3190
		/* STOP, raise data while clock is high */
3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222
		tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
		tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
		tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
	}

}




/***************************************************************
 *	tlan_ee_read_byte
 *
 *	Returns:
 *		No error = 0, else, the stage at which the error
 *		occurred.
 *	Parms:
 *		io_base		The IO port base address for the
 *				TLAN device with the EEPROM to
 *				use.
 *		ee_addr		The address of the byte in the
 *				EEPROM whose contents are to be
 *				retrieved.
 *		data		An address to a char to hold the
 *				data obtained from the EEPROM.
 *
 *	This function reads a byte of information from an byte
 *	cell in the EEPROM.
 *
 **************************************************************/

static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data)
L
Linus Torvalds 已提交
3223 3224
{
	int err;
3225
	struct tlan_priv *priv = netdev_priv(dev);
L
Linus Torvalds 已提交
3226
	unsigned long flags = 0;
3227
	int ret = 0;
L
Linus Torvalds 已提交
3228 3229 3230

	spin_lock_irqsave(&priv->lock, flags);

3231 3232 3233 3234
	tlan_ee_send_start(dev->base_addr);
	err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK);
	if (err) {
		ret = 1;
L
Linus Torvalds 已提交
3235 3236
		goto fail;
	}
3237 3238 3239
	err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK);
	if (err) {
		ret = 2;
L
Linus Torvalds 已提交
3240 3241
		goto fail;
	}
3242 3243 3244 3245
	tlan_ee_send_start(dev->base_addr);
	err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK);
	if (err) {
		ret = 3;
L
Linus Torvalds 已提交
3246 3247
		goto fail;
	}
3248
	tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP);
L
Linus Torvalds 已提交
3249 3250 3251 3252 3253
fail:
	spin_unlock_irqrestore(&priv->lock, flags);

	return ret;

3254
}
L
Linus Torvalds 已提交
3255 3256 3257