atombios.h

/*
 * Copyright 2006-2007 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */

/****************************************************************************/
/*Portion I: Definitions  shared between VBIOS and Driver                   */
/****************************************************************************/

#ifndef _ATOMBIOS_H
#define _ATOMBIOS_H

#define ATOM_VERSION_MAJOR                   0x00020000
#define ATOM_VERSION_MINOR                   0x00000002

#define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)

/* Endianness should be specified before inclusion,
 * default to little endian
 */
#ifndef ATOM_BIG_ENDIAN
#error Endian not specified
#endif

#ifdef _H2INC
#ifndef ULONG
typedef unsigned long ULONG;
#endif

#ifndef UCHAR
typedef unsigned char UCHAR;
#endif

#ifndef USHORT
typedef unsigned short USHORT;
#endif
#endif

#define ATOM_DAC_A            0
#define ATOM_DAC_B            1
#define ATOM_EXT_DAC          2

#define ATOM_CRTC1            0
#define ATOM_CRTC2            1

#define ATOM_DIGA             0
#define ATOM_DIGB             1

#define ATOM_PPLL1            0
#define ATOM_PPLL2            1

#define ATOM_SCALER1          0
#define ATOM_SCALER2          1

#define ATOM_SCALER_DISABLE   0
#define ATOM_SCALER_CENTER    1
#define ATOM_SCALER_EXPANSION 2
#define ATOM_SCALER_MULTI_EX  3

#define ATOM_DISABLE          0
#define ATOM_ENABLE           1
#define ATOM_LCD_BLOFF                          (ATOM_DISABLE+2)
#define ATOM_LCD_BLON                           (ATOM_ENABLE+2)
#define ATOM_LCD_BL_BRIGHTNESS_CONTROL          (ATOM_ENABLE+3)
#define ATOM_LCD_SELFTEST_START									(ATOM_DISABLE+5)
#define ATOM_LCD_SELFTEST_STOP									(ATOM_ENABLE+5)
#define ATOM_ENCODER_INIT			                  (ATOM_DISABLE+7)

#define ATOM_BLANKING         1
#define ATOM_BLANKING_OFF     0

#define ATOM_CURSOR1          0
#define ATOM_CURSOR2          1

#define ATOM_ICON1            0
#define ATOM_ICON2            1

#define ATOM_CRT1             0
#define ATOM_CRT2             1

#define ATOM_TV_NTSC          1
#define ATOM_TV_NTSCJ         2
#define ATOM_TV_PAL           3
#define ATOM_TV_PALM          4
#define ATOM_TV_PALCN         5
#define ATOM_TV_PALN          6
#define ATOM_TV_PAL60         7
#define ATOM_TV_SECAM         8
#define ATOM_TV_CV            16

#define ATOM_DAC1_PS2         1
#define ATOM_DAC1_CV          2
#define ATOM_DAC1_NTSC        3
#define ATOM_DAC1_PAL         4

#define ATOM_DAC2_PS2         ATOM_DAC1_PS2
#define ATOM_DAC2_CV          ATOM_DAC1_CV
#define ATOM_DAC2_NTSC        ATOM_DAC1_NTSC
#define ATOM_DAC2_PAL         ATOM_DAC1_PAL

#define ATOM_PM_ON            0
#define ATOM_PM_STANDBY       1
#define ATOM_PM_SUSPEND       2
#define ATOM_PM_OFF           3

/* Bit0:{=0:single, =1:dual},
   Bit1 {=0:666RGB, =1:888RGB},
   Bit2:3:{Grey level}
   Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/

#define ATOM_PANEL_MISC_DUAL               0x00000001
#define ATOM_PANEL_MISC_888RGB             0x00000002
#define ATOM_PANEL_MISC_GREY_LEVEL         0x0000000C
#define ATOM_PANEL_MISC_FPDI               0x00000010
#define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT   2
#define ATOM_PANEL_MISC_SPATIAL            0x00000020
#define ATOM_PANEL_MISC_TEMPORAL           0x00000040
#define ATOM_PANEL_MISC_API_ENABLED        0x00000080

#define MEMTYPE_DDR1              "DDR1"
#define MEMTYPE_DDR2              "DDR2"
#define MEMTYPE_DDR3              "DDR3"
#define MEMTYPE_DDR4              "DDR4"

#define ASIC_BUS_TYPE_PCI         "PCI"
#define ASIC_BUS_TYPE_AGP         "AGP"
#define ASIC_BUS_TYPE_PCIE        "PCI_EXPRESS"

/* Maximum size of that FireGL flag string */

#define ATOM_FIREGL_FLAG_STRING     "FGL"	/* Flag used to enable FireGL Support */
#define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING  3	/* sizeof( ATOM_FIREGL_FLAG_STRING ) */

#define ATOM_FAKE_DESKTOP_STRING    "DSK"	/* Flag used to enable mobile ASIC on Desktop */
#define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING  ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING

#define ATOM_M54T_FLAG_STRING       "M54T"	/* Flag used to enable M54T Support */
#define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING    4	/* sizeof( ATOM_M54T_FLAG_STRING ) */

#define HW_ASSISTED_I2C_STATUS_FAILURE          2
#define HW_ASSISTED_I2C_STATUS_SUCCESS          1

#pragma pack(1)			/* BIOS data must use byte aligment */

/*  Define offset to location of ROM header. */

#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER		0x00000048L
#define OFFSET_TO_ATOM_ROM_IMAGE_SIZE				    0x00000002L

#define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE    0x94
#define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE   20	/* including the terminator 0x0! */
#define	OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER		0x002f
#define	OFFSET_TO_GET_ATOMBIOS_STRINGS_START		0x006e

/* Common header for all ROM Data tables.
  Every table pointed  _ATOM_MASTER_DATA_TABLE has this common header.
  And the pointer actually points to this header. */

typedef struct _ATOM_COMMON_TABLE_HEADER {
	USHORT usStructureSize;
	UCHAR ucTableFormatRevision;	/*Change it when the Parser is not backward compatible */
	UCHAR ucTableContentRevision;	/*Change it only when the table needs to change but the firmware */
	/*Image can't be updated, while Driver needs to carry the new table! */
} ATOM_COMMON_TABLE_HEADER;

typedef struct _ATOM_ROM_HEADER {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR uaFirmWareSignature[4];	/*Signature to distinguish between Atombios and non-atombios,
					   atombios should init it as "ATOM", don't change the position */
	USHORT usBiosRuntimeSegmentAddress;
	USHORT usProtectedModeInfoOffset;
	USHORT usConfigFilenameOffset;
	USHORT usCRC_BlockOffset;
	USHORT usBIOS_BootupMessageOffset;
	USHORT usInt10Offset;
	USHORT usPciBusDevInitCode;
	USHORT usIoBaseAddress;
	USHORT usSubsystemVendorID;
	USHORT usSubsystemID;
	USHORT usPCI_InfoOffset;
	USHORT usMasterCommandTableOffset;	/*Offset for SW to get all command table offsets, Don't change the position */
	USHORT usMasterDataTableOffset;	/*Offset for SW to get all data table offsets, Don't change the position */
	UCHAR ucExtendedFunctionCode;
	UCHAR ucReserved;
} ATOM_ROM_HEADER;

/*==============================Command Table Portion==================================== */

#ifdef	UEFI_BUILD
#define	UTEMP	USHORT
#define	USHORT	void*
#endif

typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES {
	USHORT ASIC_Init;	/* Function Table, used by various SW components,latest version 1.1 */
	USHORT GetDisplaySurfaceSize;	/* Atomic Table,  Used by Bios when enabling HW ICON */
	USHORT ASIC_RegistersInit;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
	USHORT VRAM_BlockVenderDetection;	/* Atomic Table,  used only by Bios */
	USHORT DIGxEncoderControl;	/* Only used by Bios */
	USHORT MemoryControllerInit;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
	USHORT EnableCRTCMemReq;	/* Function Table,directly used by various SW components,latest version 2.1 */
	USHORT MemoryParamAdjust;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock if needed */
	USHORT DVOEncoderControl;	/* Function Table,directly used by various SW components,latest version 1.2 */
	USHORT GPIOPinControl;	/* Atomic Table,  only used by Bios */
	USHORT SetEngineClock;	/*Function Table,directly used by various SW components,latest version 1.1 */
	USHORT SetMemoryClock;	/* Function Table,directly used by various SW components,latest version 1.1 */
	USHORT SetPixelClock;	/*Function Table,directly used by various SW components,latest version 1.2 */
	USHORT DynamicClockGating;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
	USHORT ResetMemoryDLL;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT ResetMemoryDevice;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT MemoryPLLInit;
	USHORT AdjustDisplayPll;	/* only used by Bios */
	USHORT AdjustMemoryController;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT EnableASIC_StaticPwrMgt;	/* Atomic Table,  only used by Bios */
	USHORT ASIC_StaticPwrMgtStatusChange;	/* Obsolete, only used by Bios */
	USHORT DAC_LoadDetection;	/* Atomic Table,  directly used by various SW components,latest version 1.2 */
	USHORT LVTMAEncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.3 */
	USHORT LCD1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT DAC1EncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT DAC2EncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT DVOOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT CV1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT GetConditionalGoldenSetting;	/* only used by Bios */
	USHORT TVEncoderControl;	/* Function Table,directly used by various SW components,latest version 1.1 */
	USHORT TMDSAEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.3 */
	USHORT LVDSEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 1.3 */
	USHORT TV1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT EnableScaler;	/* Atomic Table,  used only by Bios */
	USHORT BlankCRTC;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT EnableCRTC;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT GetPixelClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT EnableVGA_Render;	/* Function Table,directly used by various SW components,latest version 1.1 */
	USHORT EnableVGA_Access;	/* Obsolete ,     only used by Bios */
	USHORT SetCRTC_Timing;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT SetCRTC_OverScan;	/* Atomic Table,  used by various SW components,latest version 1.1 */
	USHORT SetCRTC_Replication;	/* Atomic Table,  used only by Bios */
	USHORT SelectCRTC_Source;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT EnableGraphSurfaces;	/* Atomic Table,  used only by Bios */
	USHORT UpdateCRTC_DoubleBufferRegisters;
	USHORT LUT_AutoFill;	/* Atomic Table,  only used by Bios */
	USHORT EnableHW_IconCursor;	/* Atomic Table,  only used by Bios */
	USHORT GetMemoryClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT GetEngineClock;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT SetCRTC_UsingDTDTiming;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT ExternalEncoderControl;	/* Atomic Table,  directly used by various SW components,latest version 2.1 */
	USHORT LVTMAOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT VRAM_BlockDetectionByStrap;	/* Atomic Table,  used only by Bios */
	USHORT MemoryCleanUp;	/* Atomic Table,  only used by Bios */
	USHORT ProcessI2cChannelTransaction;	/* Function Table,only used by Bios */
	USHORT WriteOneByteToHWAssistedI2C;	/* Function Table,indirectly used by various SW components */
	USHORT ReadHWAssistedI2CStatus;	/* Atomic Table,  indirectly used by various SW components */
	USHORT SpeedFanControl;	/* Function Table,indirectly used by various SW components,called from ASIC_Init */
	USHORT PowerConnectorDetection;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT MC_Synchronization;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT ComputeMemoryEnginePLL;	/* Atomic Table,  indirectly used by various SW components,called from SetMemory/EngineClock */
	USHORT MemoryRefreshConversion;	/* Atomic Table,  indirectly used by various SW components,called from SetMemory or SetEngineClock */
	USHORT VRAM_GetCurrentInfoBlock;	/* Atomic Table,  used only by Bios */
	USHORT DynamicMemorySettings;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT MemoryTraining;	/* Atomic Table,  used only by Bios */
	USHORT EnableSpreadSpectrumOnPPLL;	/* Atomic Table,  directly used by various SW components,latest version 1.2 */
	USHORT TMDSAOutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT SetVoltage;	/* Function Table,directly and/or indirectly used by various SW components,latest version 1.1 */
	USHORT DAC1OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT DAC2OutputControl;	/* Atomic Table,  directly used by various SW components,latest version 1.1 */
	USHORT SetupHWAssistedI2CStatus;	/* Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" */
	USHORT ClockSource;	/* Atomic Table,  indirectly used by various SW components,called from ASIC_Init */
	USHORT MemoryDeviceInit;	/* Atomic Table,  indirectly used by various SW components,called from SetMemoryClock */
	USHORT EnableYUV;	/* Atomic Table,  indirectly used by various SW components,called from EnableVGARender */
	USHORT DIG1EncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
	USHORT DIG2EncoderControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
	USHORT DIG1TransmitterControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
	USHORT DIG2TransmitterControl;	/* Atomic Table,directly used by various SW components,latest version 1.1 */
	USHORT ProcessAuxChannelTransaction;	/* Function Table,only used by Bios */
	USHORT DPEncoderService;	/* Function Table,only used by Bios */
} ATOM_MASTER_LIST_OF_COMMAND_TABLES;

/*  For backward compatible */
#define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
#define UNIPHYTransmitterControl						     DIG1TransmitterControl
#define LVTMATransmitterControl							     DIG2TransmitterControl
#define SetCRTC_DPM_State                        GetConditionalGoldenSetting
#define SetUniphyInstance                        ASIC_StaticPwrMgtStatusChange

typedef struct _ATOM_MASTER_COMMAND_TABLE {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables;
} ATOM_MASTER_COMMAND_TABLE;

/****************************************************************************/
/*  Structures used in every command table */
/****************************************************************************/
typedef struct _ATOM_TABLE_ATTRIBUTE {
#if ATOM_BIG_ENDIAN
	USHORT UpdatedByUtility:1;	/* [15]=Table updated by utility flag */
	USHORT PS_SizeInBytes:7;	/* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
	USHORT WS_SizeInBytes:8;	/* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
#else
	USHORT WS_SizeInBytes:8;	/* [7:0]=Size of workspace in Bytes (in multiple of a dword), */
	USHORT PS_SizeInBytes:7;	/* [14:8]=Size of parameter space in Bytes (multiple of a dword), */
	USHORT UpdatedByUtility:1;	/* [15]=Table updated by utility flag */
#endif
} ATOM_TABLE_ATTRIBUTE;

typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS {
	ATOM_TABLE_ATTRIBUTE sbfAccess;
	USHORT susAccess;
} ATOM_TABLE_ATTRIBUTE_ACCESS;

/****************************************************************************/
/*  Common header for all command tables. */
/*  Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. */
/*  And the pointer actually points to this header. */
/****************************************************************************/
typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER {
	ATOM_COMMON_TABLE_HEADER CommonHeader;
	ATOM_TABLE_ATTRIBUTE TableAttribute;
} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER;

/****************************************************************************/
/*  Structures used by ComputeMemoryEnginePLLTable */
/****************************************************************************/
#define COMPUTE_MEMORY_PLL_PARAM        1
#define COMPUTE_ENGINE_PLL_PARAM        2

typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS {
	ULONG ulClock;		/* When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div */
	UCHAR ucAction;		/* 0:reserved //1:Memory //2:Engine */
	UCHAR ucReserved;	/* may expand to return larger Fbdiv later */
	UCHAR ucFbDiv;		/* return value */
	UCHAR ucPostDiv;	/* return value */
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS;

typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 {
	ULONG ulClock;		/* When return, [23:0] return real clock */
	UCHAR ucAction;		/* 0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register */
	USHORT usFbDiv;		/* return Feedback value to be written to register */
	UCHAR ucPostDiv;	/* return post div to be written to register */
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2;
#define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION   COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS

#define SET_CLOCK_FREQ_MASK                     0x00FFFFFF	/* Clock change tables only take bit [23:0] as the requested clock value */
#define USE_NON_BUS_CLOCK_MASK                  0x01000000	/* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
#define USE_MEMORY_SELF_REFRESH_MASK            0x02000000	/* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
#define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04000000	/* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
#define FIRST_TIME_CHANGE_CLOCK									0x08000000	/* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
#define SKIP_SW_PROGRAM_PLL											0x10000000	/* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */
#define USE_SS_ENABLED_PIXEL_CLOCK  USE_NON_BUS_CLOCK_MASK

#define b3USE_NON_BUS_CLOCK_MASK                  0x01	/* Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) */
#define b3USE_MEMORY_SELF_REFRESH                 0x02	/* Only applicable to memory clock change, when set, using memory self refresh during clock transition */
#define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE   0x04	/* Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change */
#define b3FIRST_TIME_CHANGE_CLOCK									0x08	/* Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup */
#define b3SKIP_SW_PROGRAM_PLL											0x10	/* Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL */

typedef struct _ATOM_COMPUTE_CLOCK_FREQ {
#if ATOM_BIG_ENDIAN
	ULONG ulComputeClockFlag:8;	/*  =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
	ULONG ulClockFreq:24;	/*  in unit of 10kHz */
#else
	ULONG ulClockFreq:24;	/*  in unit of 10kHz */
	ULONG ulComputeClockFlag:8;	/*  =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM */
#endif
} ATOM_COMPUTE_CLOCK_FREQ;

typedef struct _ATOM_S_MPLL_FB_DIVIDER {
	USHORT usFbDivFrac;
	USHORT usFbDiv;
} ATOM_S_MPLL_FB_DIVIDER;

typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 {
	union {
		ATOM_COMPUTE_CLOCK_FREQ ulClock;	/* Input Parameter */
		ATOM_S_MPLL_FB_DIVIDER ulFbDiv;	/* Output Parameter */
	};
	UCHAR ucRefDiv;		/* Output Parameter */
	UCHAR ucPostDiv;	/* Output Parameter */
	UCHAR ucCntlFlag;	/* Output Parameter */
	UCHAR ucReserved;
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3;

/*  ucCntlFlag */
#define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN          1
#define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE            2
#define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE         4

typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER {
	ATOM_COMPUTE_CLOCK_FREQ ulClock;
	ULONG ulReserved[2];
} DYNAMICE_MEMORY_SETTINGS_PARAMETER;

typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER {
	ATOM_COMPUTE_CLOCK_FREQ ulClock;
	ULONG ulMemoryClock;
	ULONG ulReserved;
} DYNAMICE_ENGINE_SETTINGS_PARAMETER;

/****************************************************************************/
/*  Structures used by SetEngineClockTable */
/****************************************************************************/
typedef struct _SET_ENGINE_CLOCK_PARAMETERS {
	ULONG ulTargetEngineClock;	/* In 10Khz unit */
} SET_ENGINE_CLOCK_PARAMETERS;

typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION {
	ULONG ulTargetEngineClock;	/* In 10Khz unit */
	COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
} SET_ENGINE_CLOCK_PS_ALLOCATION;

/****************************************************************************/
/*  Structures used by SetMemoryClockTable */
/****************************************************************************/
typedef struct _SET_MEMORY_CLOCK_PARAMETERS {
	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
} SET_MEMORY_CLOCK_PARAMETERS;

typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION {
	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
	COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved;
} SET_MEMORY_CLOCK_PS_ALLOCATION;

/****************************************************************************/
/*  Structures used by ASIC_Init.ctb */
/****************************************************************************/
typedef struct _ASIC_INIT_PARAMETERS {
	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
} ASIC_INIT_PARAMETERS;

typedef struct _ASIC_INIT_PS_ALLOCATION {
	ASIC_INIT_PARAMETERS sASICInitClocks;
	SET_ENGINE_CLOCK_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this structure */
} ASIC_INIT_PS_ALLOCATION;

/****************************************************************************/
/*  Structure used by DynamicClockGatingTable.ctb */
/****************************************************************************/
typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS {
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucPadding[3];
} DYNAMIC_CLOCK_GATING_PARAMETERS;
#define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS

/****************************************************************************/
/*  Structure used by EnableASIC_StaticPwrMgtTable.ctb */
/****************************************************************************/
typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS {
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucPadding[3];
} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS;
#define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION  ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS

/****************************************************************************/
/*  Structures used by DAC_LoadDetectionTable.ctb */
/****************************************************************************/
typedef struct _DAC_LOAD_DETECTION_PARAMETERS {
	USHORT usDeviceID;	/* {ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} */
	UCHAR ucDacType;	/* {ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} */
	UCHAR ucMisc;		/* Valid only when table revision =1.3 and above */
} DAC_LOAD_DETECTION_PARAMETERS;

/*  DAC_LOAD_DETECTION_PARAMETERS.ucMisc */
#define DAC_LOAD_MISC_YPrPb						0x01

typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION {
	DAC_LOAD_DETECTION_PARAMETERS sDacload;
	ULONG Reserved[2];	/*  Don't set this one, allocation for EXT DAC */
} DAC_LOAD_DETECTION_PS_ALLOCATION;

/****************************************************************************/
/*  Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb */
/****************************************************************************/
typedef struct _DAC_ENCODER_CONTROL_PARAMETERS {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	UCHAR ucDacStandard;	/*  See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) */
	UCHAR ucAction;		/*  0: turn off encoder */
	/*  1: setup and turn on encoder */
	/*  7: ATOM_ENCODER_INIT Initialize DAC */
} DAC_ENCODER_CONTROL_PARAMETERS;

#define DAC_ENCODER_CONTROL_PS_ALLOCATION  DAC_ENCODER_CONTROL_PARAMETERS

/****************************************************************************/
/*  Structures used by DIG1EncoderControlTable */
/*                     DIG2EncoderControlTable */
/*                     ExternalEncoderControlTable */
/****************************************************************************/
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	UCHAR ucConfig;
	/*  [2] Link Select: */
	/*  =0: PHY linkA if bfLane<3 */
	/*  =1: PHY linkB if bfLanes<3 */
	/*  =0: PHY linkA+B if bfLanes=3 */
	/*  [3] Transmitter Sel */
	/*  =0: UNIPHY or PCIEPHY */
	/*  =1: LVTMA */
	UCHAR ucAction;		/*  =0: turn off encoder */
	/*  =1: turn on encoder */
	UCHAR ucEncoderMode;
	/*  =0: DP   encoder */
	/*  =1: LVDS encoder */
	/*  =2: DVI  encoder */
	/*  =3: HDMI encoder */
	/*  =4: SDVO encoder */
	UCHAR ucLaneNum;	/*  how many lanes to enable */
	UCHAR ucReserved[2];
} DIG_ENCODER_CONTROL_PARAMETERS;
#define DIG_ENCODER_CONTROL_PS_ALLOCATION			  DIG_ENCODER_CONTROL_PARAMETERS
#define EXTERNAL_ENCODER_CONTROL_PARAMETER			DIG_ENCODER_CONTROL_PARAMETERS

/* ucConfig */
#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK				0x01
#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ		0x00
#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ		0x01
#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK				  0x04
#define ATOM_ENCODER_CONFIG_LINKA								  0x00
#define ATOM_ENCODER_CONFIG_LINKB								  0x04
#define ATOM_ENCODER_CONFIG_LINKA_B							  ATOM_TRANSMITTER_CONFIG_LINKA
#define ATOM_ENCODER_CONFIG_LINKB_A							  ATOM_ENCODER_CONFIG_LINKB
#define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK	0x08
#define ATOM_ENCODER_CONFIG_UNIPHY							  0x00
#define ATOM_ENCODER_CONFIG_LVTMA								  0x08
#define ATOM_ENCODER_CONFIG_TRANSMITTER1				  0x00
#define ATOM_ENCODER_CONFIG_TRANSMITTER2				  0x08
#define ATOM_ENCODER_CONFIG_DIGB								  0x80	/*  VBIOS Internal use, outside SW should set this bit=0 */
/*  ucAction */
/*  ATOM_ENABLE:  Enable Encoder */
/*  ATOM_DISABLE: Disable Encoder */

/* ucEncoderMode */
#define ATOM_ENCODER_MODE_DP											0
#define ATOM_ENCODER_MODE_LVDS										1
#define ATOM_ENCODER_MODE_DVI											2
#define ATOM_ENCODER_MODE_HDMI										3
#define ATOM_ENCODER_MODE_SDVO										4
#define ATOM_ENCODER_MODE_TV											13
#define ATOM_ENCODER_MODE_CV											14
#define ATOM_ENCODER_MODE_CRT											15

typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 {
#if ATOM_BIG_ENDIAN
	UCHAR ucReserved1:2;
	UCHAR ucTransmitterSel:2;	/*  =0: UniphyAB, =1: UniphyCD  =2: UniphyEF */
	UCHAR ucLinkSel:1;	/*  =0: linkA/C/E =1: linkB/D/F */
	UCHAR ucReserved:1;
	UCHAR ucDPLinkRate:1;	/*  =0: 1.62Ghz, =1: 2.7Ghz */
#else
	UCHAR ucDPLinkRate:1;	/*  =0: 1.62Ghz, =1: 2.7Ghz */
	UCHAR ucReserved:1;
	UCHAR ucLinkSel:1;	/*  =0: linkA/C/E =1: linkB/D/F */
	UCHAR ucTransmitterSel:2;	/*  =0: UniphyAB, =1: UniphyCD  =2: UniphyEF */
	UCHAR ucReserved1:2;
#endif
} ATOM_DIG_ENCODER_CONFIG_V2;

typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	ATOM_DIG_ENCODER_CONFIG_V2 acConfig;
	UCHAR ucAction;
	UCHAR ucEncoderMode;
	/*  =0: DP   encoder */
	/*  =1: LVDS encoder */
	/*  =2: DVI  encoder */
	/*  =3: HDMI encoder */
	/*  =4: SDVO encoder */
	UCHAR ucLaneNum;	/*  how many lanes to enable */
	UCHAR ucReserved[2];
} DIG_ENCODER_CONTROL_PARAMETERS_V2;

/* ucConfig */
#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK				0x01
#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ		  0x00
#define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ		  0x01
#define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK				  0x04
#define ATOM_ENCODER_CONFIG_V2_LINKA								  0x00
#define ATOM_ENCODER_CONFIG_V2_LINKB								  0x04
#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK	  0x18
#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1				    0x00
#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2				    0x08
#define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3				    0x10

/****************************************************************************/
/*  Structures used by UNIPHYTransmitterControlTable */
/*                     LVTMATransmitterControlTable */
/*                     DVOOutputControlTable */
/****************************************************************************/
typedef struct _ATOM_DP_VS_MODE {
	UCHAR ucLaneSel;
	UCHAR ucLaneSet;
} ATOM_DP_VS_MODE;

typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS {
	union {
		USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
		USHORT usInitInfo;	/*  when init uniphy,lower 8bit is used for connector type defined in objectid.h */
		ATOM_DP_VS_MODE asMode;	/*  DP Voltage swing mode */
	};
	UCHAR ucConfig;
	/*  [0]=0: 4 lane Link, */
	/*     =1: 8 lane Link ( Dual Links TMDS ) */
	/*  [1]=0: InCoherent mode */
	/*     =1: Coherent Mode */
	/*  [2] Link Select: */
	/*  =0: PHY linkA   if bfLane<3 */
	/*  =1: PHY linkB   if bfLanes<3 */
	/*  =0: PHY linkA+B if bfLanes=3 */
	/*  [5:4]PCIE lane Sel */
	/*  =0: lane 0~3 or 0~7 */
	/*  =1: lane 4~7 */
	/*  =2: lane 8~11 or 8~15 */
	/*  =3: lane 12~15 */
	UCHAR ucAction;		/*  =0: turn off encoder */
	/*  =1: turn on encoder */
	UCHAR ucReserved[4];
} DIG_TRANSMITTER_CONTROL_PARAMETERS;

#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION		DIG_TRANSMITTER_CONTROL_PARAMETERS

/* ucInitInfo */
#define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK	0x00ff

/* ucConfig */
#define ATOM_TRANSMITTER_CONFIG_8LANE_LINK			0x01
#define ATOM_TRANSMITTER_CONFIG_COHERENT				0x02
#define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK		0x04
#define ATOM_TRANSMITTER_CONFIG_LINKA						0x00
#define ATOM_TRANSMITTER_CONFIG_LINKB						0x04
#define ATOM_TRANSMITTER_CONFIG_LINKA_B					0x00
#define ATOM_TRANSMITTER_CONFIG_LINKB_A					0x04

#define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK	0x08	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */
#define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER		0x00	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */
#define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER		0x08	/*  only used when ATOM_TRANSMITTER_ACTION_ENABLE */

#define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK			0x30
#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL			0x00
#define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE			0x20
#define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN		0x30
#define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK		0xc0
#define ATOM_TRANSMITTER_CONFIG_LANE_0_3				0x00
#define ATOM_TRANSMITTER_CONFIG_LANE_0_7				0x00
#define ATOM_TRANSMITTER_CONFIG_LANE_4_7				0x40
#define ATOM_TRANSMITTER_CONFIG_LANE_8_11				0x80
#define ATOM_TRANSMITTER_CONFIG_LANE_8_15				0x80
#define ATOM_TRANSMITTER_CONFIG_LANE_12_15			0xc0

/* ucAction */
#define ATOM_TRANSMITTER_ACTION_DISABLE					       0
#define ATOM_TRANSMITTER_ACTION_ENABLE					       1
#define ATOM_TRANSMITTER_ACTION_LCD_BLOFF				       2
#define ATOM_TRANSMITTER_ACTION_LCD_BLON				       3
#define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL  4
#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START		 5
#define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP			 6
#define ATOM_TRANSMITTER_ACTION_INIT						       7
#define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT	       8
#define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT		       9
#define ATOM_TRANSMITTER_ACTION_SETUP						       10
#define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH           11

/*  Following are used for DigTransmitterControlTable ver1.2 */
typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 {
#if ATOM_BIG_ENDIAN
	UCHAR ucTransmitterSel:2;	/* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
	/*         =1 Dig Transmitter 2 ( Uniphy CD ) */
	/*         =2 Dig Transmitter 3 ( Uniphy EF ) */
	UCHAR ucReserved:1;
	UCHAR fDPConnector:1;	/* bit4=0: DP connector  =1: None DP connector */
	UCHAR ucEncoderSel:1;	/* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
	UCHAR ucLinkSel:1;	/* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
	/*     =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */

	UCHAR fCoherentMode:1;	/* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
	UCHAR fDualLinkConnector:1;	/* bit0=1: Dual Link DVI connector */
#else
	UCHAR fDualLinkConnector:1;	/* bit0=1: Dual Link DVI connector */
	UCHAR fCoherentMode:1;	/* bit1=1: Coherent Mode ( for DVI/HDMI mode ) */
	UCHAR ucLinkSel:1;	/* bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E */
	/*     =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F */
	UCHAR ucEncoderSel:1;	/* bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) */
	UCHAR fDPConnector:1;	/* bit4=0: DP connector  =1: None DP connector */
	UCHAR ucReserved:1;
	UCHAR ucTransmitterSel:2;	/* bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) */
	/*         =1 Dig Transmitter 2 ( Uniphy CD ) */
	/*         =2 Dig Transmitter 3 ( Uniphy EF ) */
#endif
} ATOM_DIG_TRANSMITTER_CONFIG_V2;

/* ucConfig */
/* Bit0 */
#define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR			0x01

/* Bit1 */
#define ATOM_TRANSMITTER_CONFIG_V2_COHERENT				          0x02

/* Bit2 */
#define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK		        0x04
#define ATOM_TRANSMITTER_CONFIG_V2_LINKA			            0x00
#define ATOM_TRANSMITTER_CONFIG_V2_LINKB				            0x04

/*  Bit3 */
#define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK	        0x08
#define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER		          0x00	/*  only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */
#define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER		          0x08	/*  only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP */

/*  Bit4 */
#define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR			        0x10

/*  Bit7:6 */
#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK     0xC0
#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1			0x00	/* AB */
#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2			0x40	/* CD */
#define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3			0x80	/* EF */

typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 {
	union {
		USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
		USHORT usInitInfo;	/*  when init uniphy,lower 8bit is used for connector type defined in objectid.h */
		ATOM_DP_VS_MODE asMode;	/*  DP Voltage swing mode */
	};
	ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig;
	UCHAR ucAction;		/*  define as ATOM_TRANSMITER_ACTION_XXX */
	UCHAR ucReserved[4];
} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2;

/****************************************************************************/
/*  Structures used by DAC1OuputControlTable */
/*                     DAC2OuputControlTable */
/*                     LVTMAOutputControlTable  (Before DEC30) */
/*                     TMDSAOutputControlTable  (Before DEC30) */
/****************************************************************************/
typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS {
	UCHAR ucAction;		/*  Possible input:ATOM_ENABLE||ATOMDISABLE */
	/*  When the display is LCD, in addition to above: */
	/*  ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| */
	/*  ATOM_LCD_SELFTEST_STOP */

	UCHAR aucPadding[3];	/*  padding to DWORD aligned */
} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS;

#define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS

#define CRT1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define CRT1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define CRT2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define CRT2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define CV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define CV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define TV1_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define TV1_OUTPUT_CONTROL_PS_ALLOCATION   DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define DFP1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define DFP1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define DFP2_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define DFP2_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define LCD1_OUTPUT_CONTROL_PARAMETERS     DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define LCD1_OUTPUT_CONTROL_PS_ALLOCATION  DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION

#define DVO_OUTPUT_CONTROL_PARAMETERS      DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
#define DVO_OUTPUT_CONTROL_PS_ALLOCATION   DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
#define DVO_OUTPUT_CONTROL_PARAMETERS_V3	 DIG_TRANSMITTER_CONTROL_PARAMETERS

/****************************************************************************/
/*  Structures used by BlankCRTCTable */
/****************************************************************************/
typedef struct _BLANK_CRTC_PARAMETERS {
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucBlanking;	/*  ATOM_BLANKING or ATOM_BLANKINGOFF */
	USHORT usBlackColorRCr;
	USHORT usBlackColorGY;
	USHORT usBlackColorBCb;
} BLANK_CRTC_PARAMETERS;
#define BLANK_CRTC_PS_ALLOCATION    BLANK_CRTC_PARAMETERS

/****************************************************************************/
/*  Structures used by EnableCRTCTable */
/*                     EnableCRTCMemReqTable */
/*                     UpdateCRTC_DoubleBufferRegistersTable */
/****************************************************************************/
typedef struct _ENABLE_CRTC_PARAMETERS {
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucPadding[2];
} ENABLE_CRTC_PARAMETERS;
#define ENABLE_CRTC_PS_ALLOCATION   ENABLE_CRTC_PARAMETERS

/****************************************************************************/
/*  Structures used by SetCRTC_OverScanTable */
/****************************************************************************/
typedef struct _SET_CRTC_OVERSCAN_PARAMETERS {
	USHORT usOverscanRight;	/*  right */
	USHORT usOverscanLeft;	/*  left */
	USHORT usOverscanBottom;	/*  bottom */
	USHORT usOverscanTop;	/*  top */
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucPadding[3];
} SET_CRTC_OVERSCAN_PARAMETERS;
#define SET_CRTC_OVERSCAN_PS_ALLOCATION  SET_CRTC_OVERSCAN_PARAMETERS

/****************************************************************************/
/*  Structures used by SetCRTC_ReplicationTable */
/****************************************************************************/
typedef struct _SET_CRTC_REPLICATION_PARAMETERS {
	UCHAR ucH_Replication;	/*  horizontal replication */
	UCHAR ucV_Replication;	/*  vertical replication */
	UCHAR usCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucPadding;
} SET_CRTC_REPLICATION_PARAMETERS;
#define SET_CRTC_REPLICATION_PS_ALLOCATION  SET_CRTC_REPLICATION_PARAMETERS

/****************************************************************************/
/*  Structures used by SelectCRTC_SourceTable */
/****************************************************************************/
typedef struct _SELECT_CRTC_SOURCE_PARAMETERS {
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucDevice;		/*  ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... */
	UCHAR ucPadding[2];
} SELECT_CRTC_SOURCE_PARAMETERS;
#define SELECT_CRTC_SOURCE_PS_ALLOCATION  SELECT_CRTC_SOURCE_PARAMETERS

typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 {
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucEncoderID;	/*  DAC1/DAC2/TVOUT/DIG1/DIG2/DVO */
	UCHAR ucEncodeMode;	/*  Encoding mode, only valid when using DIG1/DIG2/DVO */
	UCHAR ucPadding;
} SELECT_CRTC_SOURCE_PARAMETERS_V2;

/* ucEncoderID */
/* #define ASIC_INT_DAC1_ENCODER_ID                                              0x00 */
/* #define ASIC_INT_TV_ENCODER_ID                                                                        0x02 */
/* #define ASIC_INT_DIG1_ENCODER_ID                                                              0x03 */
/* #define ASIC_INT_DAC2_ENCODER_ID                                                              0x04 */
/* #define ASIC_EXT_TV_ENCODER_ID                                                                        0x06 */
/* #define ASIC_INT_DVO_ENCODER_ID                                                                       0x07 */
/* #define ASIC_INT_DIG2_ENCODER_ID                                                              0x09 */
/* #define ASIC_EXT_DIG_ENCODER_ID                                                                       0x05 */

/* ucEncodeMode */
/* #define ATOM_ENCODER_MODE_DP                                                                          0 */
/* #define ATOM_ENCODER_MODE_LVDS                                                                        1 */
/* #define ATOM_ENCODER_MODE_DVI                                                                         2 */
/* #define ATOM_ENCODER_MODE_HDMI                                                                        3 */
/* #define ATOM_ENCODER_MODE_SDVO                                                                        4 */
/* #define ATOM_ENCODER_MODE_TV                                                                          13 */
/* #define ATOM_ENCODER_MODE_CV                                                                          14 */
/* #define ATOM_ENCODER_MODE_CRT                                                                         15 */

/****************************************************************************/
/*  Structures used by SetPixelClockTable */
/*                     GetPixelClockTable */
/****************************************************************************/
/* Major revision=1., Minor revision=1 */
typedef struct _PIXEL_CLOCK_PARAMETERS {
	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
	/*  0 means disable PPLL */
	USHORT usRefDiv;	/*  Reference divider */
	USHORT usFbDiv;		/*  feedback divider */
	UCHAR ucPostDiv;	/*  post divider */
	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
	UCHAR ucRefDivSrc;	/*  ATOM_PJITTER or ATO_NONPJITTER */
	UCHAR ucCRTC;		/*  Which CRTC uses this Ppll */
	UCHAR ucPadding;
} PIXEL_CLOCK_PARAMETERS;

/* Major revision=1., Minor revision=2, add ucMiscIfno */
/* ucMiscInfo: */
#define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
#define MISC_DEVICE_INDEX_MASK        0xF0
#define MISC_DEVICE_INDEX_SHIFT       4

typedef struct _PIXEL_CLOCK_PARAMETERS_V2 {
	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
	/*  0 means disable PPLL */
	USHORT usRefDiv;	/*  Reference divider */
	USHORT usFbDiv;		/*  feedback divider */
	UCHAR ucPostDiv;	/*  post divider */
	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
	UCHAR ucRefDivSrc;	/*  ATOM_PJITTER or ATO_NONPJITTER */
	UCHAR ucCRTC;		/*  Which CRTC uses this Ppll */
	UCHAR ucMiscInfo;	/*  Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog */
} PIXEL_CLOCK_PARAMETERS_V2;

/* Major revision=1., Minor revision=3, structure/definition change */
/* ucEncoderMode: */
/* ATOM_ENCODER_MODE_DP */
/* ATOM_ENOCDER_MODE_LVDS */
/* ATOM_ENOCDER_MODE_DVI */
/* ATOM_ENOCDER_MODE_HDMI */
/* ATOM_ENOCDER_MODE_SDVO */
/* ATOM_ENCODER_MODE_TV                                                                          13 */
/* ATOM_ENCODER_MODE_CV                                                                          14 */
/* ATOM_ENCODER_MODE_CRT                                                                         15 */

/* ucDVOConfig */
/* #define DVO_ENCODER_CONFIG_RATE_SEL                                                   0x01 */
/* #define DVO_ENCODER_CONFIG_DDR_SPEED                                          0x00 */
/* #define DVO_ENCODER_CONFIG_SDR_SPEED                                          0x01 */
/* #define DVO_ENCODER_CONFIG_OUTPUT_SEL                                         0x0c */
/* #define DVO_ENCODER_CONFIG_LOW12BIT                                                   0x00 */
/* #define DVO_ENCODER_CONFIG_UPPER12BIT                                         0x04 */
/* #define DVO_ENCODER_CONFIG_24BIT                                                              0x08 */

/* ucMiscInfo: also changed, see below */
#define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL						0x01
#define PIXEL_CLOCK_MISC_VGA_MODE										0x02
#define PIXEL_CLOCK_MISC_CRTC_SEL_MASK							0x04
#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1							0x00
#define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2							0x04
#define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK			0x08

typedef struct _PIXEL_CLOCK_PARAMETERS_V3 {
	USHORT usPixelClock;	/*  in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) */
	/*  0 means disable PPLL. For VGA PPLL,make sure this value is not 0. */
	USHORT usRefDiv;	/*  Reference divider */
	USHORT usFbDiv;		/*  feedback divider */
	UCHAR ucPostDiv;	/*  post divider */
	UCHAR ucFracFbDiv;	/*  fractional feedback divider */
	UCHAR ucPpll;		/*  ATOM_PPLL1 or ATOM_PPL2 */
	UCHAR ucTransmitterId;	/*  graphic encoder id defined in objectId.h */
	union {
		UCHAR ucEncoderMode;	/*  encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ */
		UCHAR ucDVOConfig;	/*  when use DVO, need to know SDR/DDR, 12bit or 24bit */
	};
	UCHAR ucMiscInfo;	/*  bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel */
	/*  bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source */
} PIXEL_CLOCK_PARAMETERS_V3;

#define PIXEL_CLOCK_PARAMETERS_LAST			PIXEL_CLOCK_PARAMETERS_V2
#define GET_PIXEL_CLOCK_PS_ALLOCATION		PIXEL_CLOCK_PARAMETERS_LAST

/****************************************************************************/
/*  Structures used by AdjustDisplayPllTable */
/****************************************************************************/
typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS {
	USHORT usPixelClock;
	UCHAR ucTransmitterID;
	UCHAR ucEncodeMode;
	union {
		UCHAR ucDVOConfig;	/* if DVO, need passing link rate and output 12bitlow or 24bit */
		UCHAR ucConfig;	/* if none DVO, not defined yet */
	};
	UCHAR ucReserved[3];
} ADJUST_DISPLAY_PLL_PARAMETERS;

#define ADJUST_DISPLAY_CONFIG_SS_ENABLE       0x10

#define ADJUST_DISPLAY_PLL_PS_ALLOCATION			ADJUST_DISPLAY_PLL_PARAMETERS

/****************************************************************************/
/*  Structures used by EnableYUVTable */
/****************************************************************************/
typedef struct _ENABLE_YUV_PARAMETERS {
	UCHAR ucEnable;		/*  ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) */
	UCHAR ucCRTC;		/*  Which CRTC needs this YUV or RGB format */
	UCHAR ucPadding[2];
} ENABLE_YUV_PARAMETERS;
#define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS

/****************************************************************************/
/*  Structures used by GetMemoryClockTable */
/****************************************************************************/
typedef struct _GET_MEMORY_CLOCK_PARAMETERS {
	ULONG ulReturnMemoryClock;	/*  current memory speed in 10KHz unit */
} GET_MEMORY_CLOCK_PARAMETERS;
#define GET_MEMORY_CLOCK_PS_ALLOCATION  GET_MEMORY_CLOCK_PARAMETERS

/****************************************************************************/
/*  Structures used by GetEngineClockTable */
/****************************************************************************/
typedef struct _GET_ENGINE_CLOCK_PARAMETERS {
	ULONG ulReturnEngineClock;	/*  current engine speed in 10KHz unit */
} GET_ENGINE_CLOCK_PARAMETERS;
#define GET_ENGINE_CLOCK_PS_ALLOCATION  GET_ENGINE_CLOCK_PARAMETERS

/****************************************************************************/
/*  Following Structures and constant may be obsolete */
/****************************************************************************/
/* Maxium 8 bytes,the data read in will be placed in the parameter space. */
/* Read operaion successeful when the paramter space is non-zero, otherwise read operation failed */
typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS {
	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
	USHORT usVRAMAddress;	/* Adress in Frame Buffer where to pace raw EDID */
	USHORT usStatus;	/* When use output: lower byte EDID checksum, high byte hardware status */
	/* WHen use input:  lower byte as 'byte to read':currently limited to 128byte or 1byte */
	UCHAR ucSlaveAddr;	/* Read from which slave */
	UCHAR ucLineNumber;	/* Read from which HW assisted line */
} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS;
#define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION  READ_EDID_FROM_HW_I2C_DATA_PARAMETERS

#define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE                  0
#define  ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES              1
#define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK       2
#define  ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK  3
#define  ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK       4

typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS {
	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
	USHORT usByteOffset;	/* Write to which byte */
	/* Upper portion of usByteOffset is Format of data */
	/* 1bytePS+offsetPS */
	/* 2bytesPS+offsetPS */
	/* blockID+offsetPS */
	/* blockID+offsetID */
	/* blockID+counterID+offsetID */
	UCHAR ucData;		/* PS data1 */
	UCHAR ucStatus;		/* Status byte 1=success, 2=failure, Also is used as PS data2 */
	UCHAR ucSlaveAddr;	/* Write to which slave */
	UCHAR ucLineNumber;	/* Write from which HW assisted line */
} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS;

#define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION  WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS

typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS {
	USHORT usPrescale;	/* Ratio between Engine clock and I2C clock */
	UCHAR ucSlaveAddr;	/* Write to which slave */
	UCHAR ucLineNumber;	/* Write from which HW assisted line */
} SET_UP_HW_I2C_DATA_PARAMETERS;

/**************************************************************************/
#define SPEED_FAN_CONTROL_PS_ALLOCATION   WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS

/****************************************************************************/
/*  Structures used by PowerConnectorDetectionTable */
/****************************************************************************/
typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS {
	UCHAR ucPowerConnectorStatus;	/* Used for return value 0: detected, 1:not detected */
	UCHAR ucPwrBehaviorId;
	USHORT usPwrBudget;	/* how much power currently boot to in unit of watt */
} POWER_CONNECTOR_DETECTION_PARAMETERS;

typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION {
	UCHAR ucPowerConnectorStatus;	/* Used for return value 0: detected, 1:not detected */
	UCHAR ucReserved;
	USHORT usPwrBudget;	/* how much power currently boot to in unit of watt */
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
} POWER_CONNECTOR_DETECTION_PS_ALLOCATION;

/****************************LVDS SS Command Table Definitions**********************/

/****************************************************************************/
/*  Structures used by EnableSpreadSpectrumOnPPLLTable */
/****************************************************************************/
typedef struct _ENABLE_LVDS_SS_PARAMETERS {
	USHORT usSpreadSpectrumPercentage;
	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
	UCHAR ucSpreadSpectrumStepSize_Delay;	/* bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY */
	UCHAR ucEnable;		/* ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucPadding[3];
} ENABLE_LVDS_SS_PARAMETERS;

/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 {
	USHORT usSpreadSpectrumPercentage;
	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
	UCHAR ucSpreadSpectrumStep;	/*  */
	UCHAR ucEnable;		/* ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucSpreadSpectrumDelay;
	UCHAR ucSpreadSpectrumRange;
	UCHAR ucPadding;
} ENABLE_LVDS_SS_PARAMETERS_V2;

/* This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. */
typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL {
	USHORT usSpreadSpectrumPercentage;
	UCHAR ucSpreadSpectrumType;	/*  Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
	UCHAR ucSpreadSpectrumStep;	/*  */
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucSpreadSpectrumDelay;
	UCHAR ucSpreadSpectrumRange;
	UCHAR ucPpll;		/*  ATOM_PPLL1/ATOM_PPLL2 */
} ENABLE_SPREAD_SPECTRUM_ON_PPLL;

#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION  ENABLE_SPREAD_SPECTRUM_ON_PPLL

/**************************************************************************/

typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION {
	PIXEL_CLOCK_PARAMETERS sPCLKInput;
	ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;	/* Caller doesn't need to init this portion */
} SET_PIXEL_CLOCK_PS_ALLOCATION;

#define ENABLE_VGA_RENDER_PS_ALLOCATION   SET_PIXEL_CLOCK_PS_ALLOCATION

/****************************************************************************/
/*  Structures used by ### */
/****************************************************************************/
typedef struct _MEMORY_TRAINING_PARAMETERS {
	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
} MEMORY_TRAINING_PARAMETERS;
#define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS

/****************************LVDS and other encoder command table definitions **********************/

/****************************************************************************/
/*  Structures used by LVDSEncoderControlTable   (Before DCE30) */
/*                     LVTMAEncoderControlTable  (Before DCE30) */
/*                     TMDSAEncoderControlTable  (Before DCE30) */
/****************************************************************************/
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	UCHAR ucMisc;		/*  bit0=0: Enable single link */
	/*      =1: Enable dual link */
	/*  Bit1=0: 666RGB */
	/*      =1: 888RGB */
	UCHAR ucAction;		/*  0: turn off encoder */
	/*  1: setup and turn on encoder */
} LVDS_ENCODER_CONTROL_PARAMETERS;

#define LVDS_ENCODER_CONTROL_PS_ALLOCATION  LVDS_ENCODER_CONTROL_PARAMETERS

#define TMDS1_ENCODER_CONTROL_PARAMETERS    LVDS_ENCODER_CONTROL_PARAMETERS
#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS

#define TMDS2_ENCODER_CONTROL_PARAMETERS    TMDS1_ENCODER_CONTROL_PARAMETERS
#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS

/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	UCHAR ucMisc;		/*  see PANEL_ENCODER_MISC_xx defintions below */
	UCHAR ucAction;		/*  0: turn off encoder */
	/*  1: setup and turn on encoder */
	UCHAR ucTruncate;	/*  bit0=0: Disable truncate */
	/*      =1: Enable truncate */
	/*  bit4=0: 666RGB */
	/*      =1: 888RGB */
	UCHAR ucSpatial;	/*  bit0=0: Disable spatial dithering */
	/*      =1: Enable spatial dithering */
	/*  bit4=0: 666RGB */
	/*      =1: 888RGB */
	UCHAR ucTemporal;	/*  bit0=0: Disable temporal dithering */
	/*      =1: Enable temporal dithering */
	/*  bit4=0: 666RGB */
	/*      =1: 888RGB */
	/*  bit5=0: Gray level 2 */
	/*      =1: Gray level 4 */
	UCHAR ucFRC;		/*  bit4=0: 25FRC_SEL pattern E */
	/*      =1: 25FRC_SEL pattern F */
	/*  bit6:5=0: 50FRC_SEL pattern A */
	/*        =1: 50FRC_SEL pattern B */
	/*        =2: 50FRC_SEL pattern C */
	/*        =3: 50FRC_SEL pattern D */
	/*  bit7=0: 75FRC_SEL pattern E */
	/*      =1: 75FRC_SEL pattern F */
} LVDS_ENCODER_CONTROL_PARAMETERS_V2;

#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2

#define TMDS1_ENCODER_CONTROL_PARAMETERS_V2    LVDS_ENCODER_CONTROL_PARAMETERS_V2
#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2

#define TMDS2_ENCODER_CONTROL_PARAMETERS_V2    TMDS1_ENCODER_CONTROL_PARAMETERS_V2
#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2

#define LVDS_ENCODER_CONTROL_PARAMETERS_V3     LVDS_ENCODER_CONTROL_PARAMETERS_V2
#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3  LVDS_ENCODER_CONTROL_PARAMETERS_V3

#define TMDS1_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3

#define TMDS2_ENCODER_CONTROL_PARAMETERS_V3    LVDS_ENCODER_CONTROL_PARAMETERS_V3
#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3

/****************************************************************************/
/*  Structures used by ### */
/****************************************************************************/
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS {
	UCHAR ucEnable;		/*  Enable or Disable External TMDS encoder */
	UCHAR ucMisc;		/*  Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} */
	UCHAR ucPadding[2];
} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS;

typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION {
	ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION;

#define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2  LVDS_ENCODER_CONTROL_PARAMETERS_V2

typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 {
	ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2;

typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION {
	DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION;

/****************************************************************************/
/*  Structures used by DVOEncoderControlTable */
/****************************************************************************/
/* ucTableFormatRevision=1,ucTableContentRevision=3 */

/* ucDVOConfig: */
#define DVO_ENCODER_CONFIG_RATE_SEL							0x01
#define DVO_ENCODER_CONFIG_DDR_SPEED						0x00
#define DVO_ENCODER_CONFIG_SDR_SPEED						0x01
#define DVO_ENCODER_CONFIG_OUTPUT_SEL						0x0c
#define DVO_ENCODER_CONFIG_LOW12BIT							0x00
#define DVO_ENCODER_CONFIG_UPPER12BIT						0x04
#define DVO_ENCODER_CONFIG_24BIT								0x08

typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 {
	USHORT usPixelClock;
	UCHAR ucDVOConfig;
	UCHAR ucAction;		/* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
	UCHAR ucReseved[4];
} DVO_ENCODER_CONTROL_PARAMETERS_V3;
#define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3	DVO_ENCODER_CONTROL_PARAMETERS_V3

/* ucTableFormatRevision=1 */
/* ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for */
/*  bit1=0: non-coherent mode */
/*      =1: coherent mode */

/* ========================================================================================== */
/* Only change is here next time when changing encoder parameter definitions again! */
#define LVDS_ENCODER_CONTROL_PARAMETERS_LAST     LVDS_ENCODER_CONTROL_PARAMETERS_V3
#define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST  LVDS_ENCODER_CONTROL_PARAMETERS_LAST

#define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
#define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST

#define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST    LVDS_ENCODER_CONTROL_PARAMETERS_V3
#define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST

#define DVO_ENCODER_CONTROL_PARAMETERS_LAST      DVO_ENCODER_CONTROL_PARAMETERS
#define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST   DVO_ENCODER_CONTROL_PS_ALLOCATION

/* ========================================================================================== */
#define PANEL_ENCODER_MISC_DUAL                0x01
#define PANEL_ENCODER_MISC_COHERENT            0x02
#define	PANEL_ENCODER_MISC_TMDS_LINKB					 0x04
#define	PANEL_ENCODER_MISC_HDMI_TYPE					 0x08

#define PANEL_ENCODER_ACTION_DISABLE           ATOM_DISABLE
#define PANEL_ENCODER_ACTION_ENABLE            ATOM_ENABLE
#define PANEL_ENCODER_ACTION_COHERENTSEQ       (ATOM_ENABLE+1)

#define PANEL_ENCODER_TRUNCATE_EN              0x01
#define PANEL_ENCODER_TRUNCATE_DEPTH           0x10
#define PANEL_ENCODER_SPATIAL_DITHER_EN        0x01
#define PANEL_ENCODER_SPATIAL_DITHER_DEPTH     0x10
#define PANEL_ENCODER_TEMPORAL_DITHER_EN       0x01
#define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH    0x10
#define PANEL_ENCODER_TEMPORAL_LEVEL_4         0x20
#define PANEL_ENCODER_25FRC_MASK               0x10
#define PANEL_ENCODER_25FRC_E                  0x00
#define PANEL_ENCODER_25FRC_F                  0x10
#define PANEL_ENCODER_50FRC_MASK               0x60
#define PANEL_ENCODER_50FRC_A                  0x00
#define PANEL_ENCODER_50FRC_B                  0x20
#define PANEL_ENCODER_50FRC_C                  0x40
#define PANEL_ENCODER_50FRC_D                  0x60
#define PANEL_ENCODER_75FRC_MASK               0x80
#define PANEL_ENCODER_75FRC_E                  0x00
#define PANEL_ENCODER_75FRC_F                  0x80

/****************************************************************************/
/*  Structures used by SetVoltageTable */
/****************************************************************************/
#define SET_VOLTAGE_TYPE_ASIC_VDDC             1
#define SET_VOLTAGE_TYPE_ASIC_MVDDC            2
#define SET_VOLTAGE_TYPE_ASIC_MVDDQ            3
#define SET_VOLTAGE_TYPE_ASIC_VDDCI            4
#define SET_VOLTAGE_INIT_MODE                  5
#define SET_VOLTAGE_GET_MAX_VOLTAGE            6	/* Gets the Max. voltage for the soldered Asic */

#define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE       0x1
#define SET_ASIC_VOLTAGE_MODE_SOURCE_A         0x2
#define SET_ASIC_VOLTAGE_MODE_SOURCE_B         0x4

#define	SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE      0x0
#define	SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL      0x1
#define	SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK     0x2

typedef struct _SET_VOLTAGE_PARAMETERS {
	UCHAR ucVoltageType;	/*  To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
	UCHAR ucVoltageMode;	/*  To set all, to set source A or source B or ... */
	UCHAR ucVoltageIndex;	/*  An index to tell which voltage level */
	UCHAR ucReserved;
} SET_VOLTAGE_PARAMETERS;

typedef struct _SET_VOLTAGE_PARAMETERS_V2 {
	UCHAR ucVoltageType;	/*  To tell which voltage to set up, VDDC/MVDDC/MVDDQ */
	UCHAR ucVoltageMode;	/*  Not used, maybe use for state machine for differen power mode */
	USHORT usVoltageLevel;	/*  real voltage level */
} SET_VOLTAGE_PARAMETERS_V2;

typedef struct _SET_VOLTAGE_PS_ALLOCATION {
	SET_VOLTAGE_PARAMETERS sASICSetVoltage;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
} SET_VOLTAGE_PS_ALLOCATION;

/****************************************************************************/
/*  Structures used by TVEncoderControlTable */
/****************************************************************************/
typedef struct _TV_ENCODER_CONTROL_PARAMETERS {
	USHORT usPixelClock;	/*  in 10KHz; for bios convenient */
	UCHAR ucTvStandard;	/*  See definition "ATOM_TV_NTSC ..." */
	UCHAR ucAction;		/*  0: turn off encoder */
	/*  1: setup and turn on encoder */
} TV_ENCODER_CONTROL_PARAMETERS;

typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION {
	TV_ENCODER_CONTROL_PARAMETERS sTVEncoder;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/*  Don't set this one */
} TV_ENCODER_CONTROL_PS_ALLOCATION;

/* ==============================Data Table Portion==================================== */

#ifdef	UEFI_BUILD
#define	UTEMP	USHORT
#define	USHORT	void*
#endif

/****************************************************************************/
/*  Structure used in Data.mtb */
/****************************************************************************/
typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES {
	USHORT UtilityPipeLine;	/*  Offest for the utility to get parser info,Don't change this position! */
	USHORT MultimediaCapabilityInfo;	/*  Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios */
	USHORT MultimediaConfigInfo;	/*  Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios */
	USHORT StandardVESA_Timing;	/*  Only used by Bios */
	USHORT FirmwareInfo;	/*  Shared by various SW components,latest version 1.4 */
	USHORT DAC_Info;	/*  Will be obsolete from R600 */
	USHORT LVDS_Info;	/*  Shared by various SW components,latest version 1.1 */
	USHORT TMDS_Info;	/*  Will be obsolete from R600 */
	USHORT AnalogTV_Info;	/*  Shared by various SW components,latest version 1.1 */
	USHORT SupportedDevicesInfo;	/*  Will be obsolete from R600 */
	USHORT GPIO_I2C_Info;	/*  Shared by various SW components,latest version 1.2 will be used from R600 */
	USHORT VRAM_UsageByFirmware;	/*  Shared by various SW components,latest version 1.3 will be used from R600 */
	USHORT GPIO_Pin_LUT;	/*  Shared by various SW components,latest version 1.1 */
	USHORT VESA_ToInternalModeLUT;	/*  Only used by Bios */
	USHORT ComponentVideoInfo;	/*  Shared by various SW components,latest version 2.1 will be used from R600 */
	USHORT PowerPlayInfo;	/*  Shared by various SW components,latest version 2.1,new design from R600 */
	USHORT CompassionateData;	/*  Will be obsolete from R600 */
	USHORT SaveRestoreInfo;	/*  Only used by Bios */
	USHORT PPLL_SS_Info;	/*  Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info */
	USHORT OemInfo;		/*  Defined and used by external SW, should be obsolete soon */
	USHORT XTMDS_Info;	/*  Will be obsolete from R600 */
	USHORT MclkSS_Info;	/*  Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used */
	USHORT Object_Header;	/*  Shared by various SW components,latest version 1.1 */
	USHORT IndirectIOAccess;	/*  Only used by Bios,this table position can't change at all!! */
	USHORT MC_InitParameter;	/*  Only used by command table */
	USHORT ASIC_VDDC_Info;	/*  Will be obsolete from R600 */
	USHORT ASIC_InternalSS_Info;	/*  New tabel name from R600, used to be called "ASIC_MVDDC_Info" */
	USHORT TV_VideoMode;	/*  Only used by command table */
	USHORT VRAM_Info;	/*  Only used by command table, latest version 1.3 */
	USHORT MemoryTrainingInfo;	/*  Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 */
	USHORT IntegratedSystemInfo;	/*  Shared by various SW components */
	USHORT ASIC_ProfilingInfo;	/*  New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 */
	USHORT VoltageObjectInfo;	/*  Shared by various SW components, latest version 1.1 */
	USHORT PowerSourceInfo;	/*  Shared by various SW components, latest versoin 1.1 */
} ATOM_MASTER_LIST_OF_DATA_TABLES;

#ifdef	UEFI_BUILD
#define	USHORT	UTEMP
#endif

typedef struct _ATOM_MASTER_DATA_TABLE {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
} ATOM_MASTER_DATA_TABLE;

/****************************************************************************/
/*  Structure used in MultimediaCapabilityInfoTable */
/****************************************************************************/
typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulSignature;	/*  HW info table signature string "$ATI" */
	UCHAR ucI2C_Type;	/*  I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) */
	UCHAR ucTV_OutInfo;	/*  Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) */
	UCHAR ucVideoPortInfo;	/*  Provides the video port capabilities */
	UCHAR ucHostPortInfo;	/*  Provides host port configuration information */
} ATOM_MULTIMEDIA_CAPABILITY_INFO;

/****************************************************************************/
/*  Structure used in MultimediaConfigInfoTable */
/****************************************************************************/
typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulSignature;	/*  MM info table signature sting "$MMT" */
	UCHAR ucTunerInfo;	/*  Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) */
	UCHAR ucAudioChipInfo;	/*  List the audio chip type (3:0) product type (4) and OEM revision (7:5) */
	UCHAR ucProductID;	/*  Defines as OEM ID or ATI board ID dependent on product type setting */
	UCHAR ucMiscInfo1;	/*  Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) */
	UCHAR ucMiscInfo2;	/*  I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) */
	UCHAR ucMiscInfo3;	/*  Video Decoder Type (3:0) Video In Standard/Crystal (7:4) */
	UCHAR ucMiscInfo4;	/*  Video Decoder Host Config (2:0) reserved (7:3) */
	UCHAR ucVideoInput0Info;	/*  Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
	UCHAR ucVideoInput1Info;	/*  Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
	UCHAR ucVideoInput2Info;	/*  Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
	UCHAR ucVideoInput3Info;	/*  Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
	UCHAR ucVideoInput4Info;	/*  Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) */
} ATOM_MULTIMEDIA_CONFIG_INFO;

/****************************************************************************/
/*  Structures used in FirmwareInfoTable */
/****************************************************************************/

/*  usBIOSCapability Defintion: */
/*  Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
/*  Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
/*  Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
/*  Others: Reserved */
#define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED         0x0001
#define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT            0x0002
#define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT     0x0004
#define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT      0x0008
#define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT      0x0010
#define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU         0x0020
#define ATOM_BIOS_INFO_WMI_SUPPORT                  0x0040
#define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM   0x0080
#define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT          0x0100
#define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK        0x1E00
#define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
#define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE  0x4000

#ifndef _H2INC

/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
typedef struct _ATOM_FIRMWARE_CAPABILITY {
#if ATOM_BIG_ENDIAN
	USHORT Reserved:3;
	USHORT HyperMemory_Size:4;
	USHORT HyperMemory_Support:1;
	USHORT PPMode_Assigned:1;
	USHORT WMI_SUPPORT:1;
	USHORT GPUControlsBL:1;
	USHORT EngineClockSS_Support:1;
	USHORT MemoryClockSS_Support:1;
	USHORT ExtendedDesktopSupport:1;
	USHORT DualCRTC_Support:1;
	USHORT FirmwarePosted:1;
#else
	USHORT FirmwarePosted:1;
	USHORT DualCRTC_Support:1;
	USHORT ExtendedDesktopSupport:1;
	USHORT MemoryClockSS_Support:1;
	USHORT EngineClockSS_Support:1;
	USHORT GPUControlsBL:1;
	USHORT WMI_SUPPORT:1;
	USHORT PPMode_Assigned:1;
	USHORT HyperMemory_Support:1;
	USHORT HyperMemory_Size:4;
	USHORT Reserved:3;
#endif
} ATOM_FIRMWARE_CAPABILITY;

typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
	ATOM_FIRMWARE_CAPABILITY sbfAccess;
	USHORT susAccess;
} ATOM_FIRMWARE_CAPABILITY_ACCESS;

#else

typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS {
	USHORT susAccess;
} ATOM_FIRMWARE_CAPABILITY_ACCESS;

#endif

typedef struct _ATOM_FIRMWARE_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulFirmwareRevision;
	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
	UCHAR ucASICMaxTemperature;
	UCHAR ucPadding[3];	/* Don't use them */
	ULONG aulReservedForBIOS[3];	/* Don't use them */
	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit, the definitions above can't change!!! */
	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
	USHORT usReferenceClock;	/* In 10Khz unit */
	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
	UCHAR ucDesign_ID;	/* Indicate what is the board design */
	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
} ATOM_FIRMWARE_INFO;

typedef struct _ATOM_FIRMWARE_INFO_V1_2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulFirmwareRevision;
	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
	UCHAR ucASICMaxTemperature;
	UCHAR ucMinAllowedBL_Level;
	UCHAR ucPadding[2];	/* Don't use them */
	ULONG aulReservedForBIOS[2];	/* Don't use them */
	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
	USHORT usReferenceClock;	/* In 10Khz unit */
	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
	UCHAR ucDesign_ID;	/* Indicate what is the board design */
	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_2;

typedef struct _ATOM_FIRMWARE_INFO_V1_3 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulFirmwareRevision;
	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
	UCHAR ucASICMaxTemperature;
	UCHAR ucMinAllowedBL_Level;
	UCHAR ucPadding[2];	/* Don't use them */
	ULONG aulReservedForBIOS;	/* Don't use them */
	ULONG ul3DAccelerationEngineClock;	/* In 10Khz unit */
	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
	USHORT usReferenceClock;	/* In 10Khz unit */
	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
	UCHAR ucDesign_ID;	/* Indicate what is the board design */
	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_3;

typedef struct _ATOM_FIRMWARE_INFO_V1_4 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulFirmwareRevision;
	ULONG ulDefaultEngineClock;	/* In 10Khz unit */
	ULONG ulDefaultMemoryClock;	/* In 10Khz unit */
	ULONG ulDriverTargetEngineClock;	/* In 10Khz unit */
	ULONG ulDriverTargetMemoryClock;	/* In 10Khz unit */
	ULONG ulMaxEngineClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxMemoryClockPLL_Output;	/* In 10Khz unit */
	ULONG ulMaxPixelClockPLL_Output;	/* In 10Khz unit */
	ULONG ulASICMaxEngineClock;	/* In 10Khz unit */
	ULONG ulASICMaxMemoryClock;	/* In 10Khz unit */
	UCHAR ucASICMaxTemperature;
	UCHAR ucMinAllowedBL_Level;
	USHORT usBootUpVDDCVoltage;	/* In MV unit */
	USHORT usLcdMinPixelClockPLL_Output;	/*  In MHz unit */
	USHORT usLcdMaxPixelClockPLL_Output;	/*  In MHz unit */
	ULONG ul3DAccelerationEngineClock;	/* In 10Khz unit */
	ULONG ulMinPixelClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxEngineClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinEngineClockPLL_Output;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxMemoryClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinMemoryClockPLL_Output;	/* In 10Khz unit */
	USHORT usMaxPixelClock;	/* In 10Khz unit, Max.  Pclk */
	USHORT usMinPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMaxPixelClockPLL_Input;	/* In 10Khz unit */
	USHORT usMinPixelClockPLL_Output;	/* In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output */
	ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
	USHORT usReferenceClock;	/* In 10Khz unit */
	USHORT usPM_RTS_Location;	/* RTS PM4 starting location in ROM in 1Kb unit */
	UCHAR ucPM_RTS_StreamSize;	/* RTS PM4 packets in Kb unit */
	UCHAR ucDesign_ID;	/* Indicate what is the board design */
	UCHAR ucMemoryModule_ID;	/* Indicate what is the board design */
} ATOM_FIRMWARE_INFO_V1_4;

#define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V1_4

/****************************************************************************/
/*  Structures used in IntegratedSystemInfoTable */
/****************************************************************************/
#define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN      0x2
#define IGP_CAP_FLAG_AC_CARD               0x4
#define IGP_CAP_FLAG_SDVO_CARD             0x8
#define IGP_CAP_FLAG_POSTDIV_BY_2_MODE     0x10

typedef struct _ATOM_INTEGRATED_SYSTEM_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulBootUpEngineClock;	/* in 10kHz unit */
	ULONG ulBootUpMemoryClock;	/* in 10kHz unit */
	ULONG ulMaxSystemMemoryClock;	/* in 10kHz unit */
	ULONG ulMinSystemMemoryClock;	/* in 10kHz unit */
	UCHAR ucNumberOfCyclesInPeriodHi;
	UCHAR ucLCDTimingSel;	/* =0:not valid.!=0 sel this timing descriptor from LCD EDID. */
	USHORT usReserved1;
	USHORT usInterNBVoltageLow;	/* An intermidiate PMW value to set the voltage */
	USHORT usInterNBVoltageHigh;	/* Another intermidiate PMW value to set the voltage */
	ULONG ulReserved[2];

	USHORT usFSBClock;	/* In MHz unit */
	USHORT usCapabilityFlag;	/* Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable */
	/* Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card */
	/* Bit[4]==1: P/2 mode, ==0: P/1 mode */
	USHORT usPCIENBCfgReg7;	/* bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal */
	USHORT usK8MemoryClock;	/* in MHz unit */
	USHORT usK8SyncStartDelay;	/* in 0.01 us unit */
	USHORT usK8DataReturnTime;	/* in 0.01 us unit */
	UCHAR ucMaxNBVoltage;
	UCHAR ucMinNBVoltage;
	UCHAR ucMemoryType;	/* [7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved */
	UCHAR ucNumberOfCyclesInPeriod;	/* CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod */
	UCHAR ucStartingPWM_HighTime;	/* CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime */
	UCHAR ucHTLinkWidth;	/* 16 bit vs. 8 bit */
	UCHAR ucMaxNBVoltageHigh;
	UCHAR ucMinNBVoltageHigh;
} ATOM_INTEGRATED_SYSTEM_INFO;

/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
ulBootUpMemoryClock:    For Intel IGP,it's the UMA system memory clock
                        For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
                        For AMD IGP,for now this can be 0
ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0
                        For AMD IGP,for now this can be 0

usFSBClock:             For Intel IGP,it's FSB Freq
                        For AMD IGP,it's HT Link Speed

usK8MemoryClock:        For AMD IGP only. For RevF CPU, set it to 200
usK8SyncStartDelay:     For AMD IGP only. Memory access latency in K8, required for watermark calculation
usK8DataReturnTime:     For AMD IGP only. Memory access latency in K8, required for watermark calculation

VC:Voltage Control
ucMaxNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
ucMinNBVoltage:         Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.

ucNumberOfCyclesInPeriod:   Indicate how many cycles when PWM duty is 100%. low 8 bits of the value.
ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0

ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all.
ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.

usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
*/

/*
The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST;
Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need.
The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries.

SW components can access the IGP system infor structure in the same way as before
*/

typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ULONG ulBootUpEngineClock;	/* in 10kHz unit */
	ULONG ulReserved1[2];	/* must be 0x0 for the reserved */
	ULONG ulBootUpUMAClock;	/* in 10kHz unit */
	ULONG ulBootUpSidePortClock;	/* in 10kHz unit */
	ULONG ulMinSidePortClock;	/* in 10kHz unit */
	ULONG ulReserved2[6];	/* must be 0x0 for the reserved */
	ULONG ulSystemConfig;	/* see explanation below */
	ULONG ulBootUpReqDisplayVector;
	ULONG ulOtherDisplayMisc;
	ULONG ulDDISlot1Config;
	ULONG ulDDISlot2Config;
	UCHAR ucMemoryType;	/* [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved */
	UCHAR ucUMAChannelNumber;
	UCHAR ucDockingPinBit;
	UCHAR ucDockingPinPolarity;
	ULONG ulDockingPinCFGInfo;
	ULONG ulCPUCapInfo;
	USHORT usNumberOfCyclesInPeriod;
	USHORT usMaxNBVoltage;
	USHORT usMinNBVoltage;
	USHORT usBootUpNBVoltage;
	ULONG ulHTLinkFreq;	/* in 10Khz */
	USHORT usMinHTLinkWidth;
	USHORT usMaxHTLinkWidth;
	USHORT usUMASyncStartDelay;
	USHORT usUMADataReturnTime;
	USHORT usLinkStatusZeroTime;
	USHORT usReserved;
	ULONG ulHighVoltageHTLinkFreq;	/*  in 10Khz */
	ULONG ulLowVoltageHTLinkFreq;	/*  in 10Khz */
	USHORT usMaxUpStreamHTLinkWidth;
	USHORT usMaxDownStreamHTLinkWidth;
	USHORT usMinUpStreamHTLinkWidth;
	USHORT usMinDownStreamHTLinkWidth;
	ULONG ulReserved3[97];	/* must be 0x0 */
} ATOM_INTEGRATED_SYSTEM_INFO_V2;

/*
ulBootUpEngineClock:   Boot-up Engine Clock in 10Khz;
ulBootUpUMAClock:      Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock

ulSystemConfig:
Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
Bit[1]=1: system boots up at AMD overdrived state or user customized  mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state
      =0: system boots up at driver control state. Power state depends on PowerPlay table.
Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used.
Bit[3]=1: Only one power state(Performance) will be supported.
      =0: Multiple power states supported from PowerPlay table.
Bit[4]=1: CLMC is supported and enabled on current system.
      =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface.
Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement.
      =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied.
Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored.
      =0: Voltage settings is determined by powerplay table.
Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue.
      =0: Enable CLMC as regular mode, CDLD and CILR will be enabled.

ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions.

ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
			              [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSuppportedStd definition;

ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design).
      [3:0]  - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
			[7:4]  - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12)
			[15:8] - Lane configuration attribute;
      [23:16]- Connector type, possible value:
               CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
               CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
               CONNECTOR_OBJECT_ID_HDMI_TYPE_A
               CONNECTOR_OBJECT_ID_DISPLAYPORT
			[31:24]- Reserved

ulDDISlot2Config: Same as Slot1.
ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC.
For IGP, Hypermemory is the only memory type showed in CCC.

ucUMAChannelNumber:  how many channels for the UMA;

ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin
ucDockingPinBit:     which bit in this register to read the pin status;
ucDockingPinPolarity:Polarity of the pin when docked;

ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0

usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode.
usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode.
                    GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0
                    PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1
                    GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.

ulHTLinkFreq:       Bootup HT link Frequency in 10Khz.
usMinHTLinkWidth:   Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth.
                    If CDLW enabled, both upstream and downstream width should be the same during bootup.
usMaxHTLinkWidth:   Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth.
                    If CDLW enabled, both upstream and downstream width should be the same during bootup.

usUMASyncStartDelay: Memory access latency, required for watermark calculation
usUMADataReturnTime: Memory access latency, required for watermark calculation
usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us
for Griffin or Greyhound. SBIOS needs to convert to actual time by:
                     if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us)
                     if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us)
                     if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us)
                     if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us)

ulHighVoltageHTLinkFreq:     HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0.
                             This must be less than or equal to ulHTLinkFreq(bootup frequency).
ulLowVoltageHTLinkFreq:      HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0.
                             This must be less than or equal to ulHighVoltageHTLinkFreq.

usMaxUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now.
usMaxDownStreamHTLinkWidth:  same as above.
usMinUpStreamHTLinkWidth:    Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now.
usMinDownStreamHTLinkWidth:  same as above.
*/

#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
#define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE                  0x00000004
#define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY         0x00000008
#define SYSTEM_CONFIG_CLMC_ENABLED                        0x00000010
#define SYSTEM_CONFIG_CDLW_ENABLED                        0x00000020
#define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED              0x00000040
#define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED            0x00000080

#define IGP_DDI_SLOT_LANE_CONFIG_MASK                     0x000000FF

#define b0IGP_DDI_SLOT_LANE_MAP_MASK                      0x0F
#define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK              0xF0
#define b0IGP_DDI_SLOT_CONFIG_LANE_0_3                    0x01
#define b0IGP_DDI_SLOT_CONFIG_LANE_4_7                    0x02
#define b0IGP_DDI_SLOT_CONFIG_LANE_8_11                   0x04
#define b0IGP_DDI_SLOT_CONFIG_LANE_12_15                  0x08

#define IGP_DDI_SLOT_ATTRIBUTE_MASK                       0x0000FF00
#define IGP_DDI_SLOT_CONFIG_REVERSED                      0x00000100
#define b1IGP_DDI_SLOT_CONFIG_REVERSED                    0x01

#define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK                  0x00FF0000

#define ATOM_CRT_INT_ENCODER1_INDEX                       0x00000000
#define ATOM_LCD_INT_ENCODER1_INDEX                       0x00000001
#define ATOM_TV_INT_ENCODER1_INDEX                        0x00000002
#define ATOM_DFP_INT_ENCODER1_INDEX                       0x00000003
#define ATOM_CRT_INT_ENCODER2_INDEX                       0x00000004
#define ATOM_LCD_EXT_ENCODER1_INDEX                       0x00000005
#define ATOM_TV_EXT_ENCODER1_INDEX                        0x00000006
#define ATOM_DFP_EXT_ENCODER1_INDEX                       0x00000007
#define ATOM_CV_INT_ENCODER1_INDEX                        0x00000008
#define ATOM_DFP_INT_ENCODER2_INDEX                       0x00000009
#define ATOM_CRT_EXT_ENCODER1_INDEX                       0x0000000A
#define ATOM_CV_EXT_ENCODER1_INDEX                        0x0000000B
#define ATOM_DFP_INT_ENCODER3_INDEX                       0x0000000C
#define ATOM_DFP_INT_ENCODER4_INDEX                       0x0000000D

/*  define ASIC internal encoder id ( bit vector ) */
#define ASIC_INT_DAC1_ENCODER_ID											0x00
#define ASIC_INT_TV_ENCODER_ID														0x02
#define ASIC_INT_DIG1_ENCODER_ID													0x03
#define ASIC_INT_DAC2_ENCODER_ID													0x04
#define ASIC_EXT_TV_ENCODER_ID														0x06
#define ASIC_INT_DVO_ENCODER_ID														0x07
#define ASIC_INT_DIG2_ENCODER_ID													0x09
#define ASIC_EXT_DIG_ENCODER_ID														0x05

/* define Encoder attribute */
#define ATOM_ANALOG_ENCODER																0
#define ATOM_DIGITAL_ENCODER															1

#define ATOM_DEVICE_CRT1_INDEX                            0x00000000
#define ATOM_DEVICE_LCD1_INDEX                            0x00000001
#define ATOM_DEVICE_TV1_INDEX                             0x00000002
#define ATOM_DEVICE_DFP1_INDEX                            0x00000003
#define ATOM_DEVICE_CRT2_INDEX                            0x00000004
#define ATOM_DEVICE_LCD2_INDEX                            0x00000005
#define ATOM_DEVICE_TV2_INDEX                             0x00000006
#define ATOM_DEVICE_DFP2_INDEX                            0x00000007
#define ATOM_DEVICE_CV_INDEX                              0x00000008
#define ATOM_DEVICE_DFP3_INDEX														0x00000009
#define ATOM_DEVICE_DFP4_INDEX														0x0000000A
#define ATOM_DEVICE_DFP5_INDEX														0x0000000B
#define ATOM_DEVICE_RESERVEDC_INDEX                       0x0000000C
#define ATOM_DEVICE_RESERVEDD_INDEX                       0x0000000D
#define ATOM_DEVICE_RESERVEDE_INDEX                       0x0000000E
#define ATOM_DEVICE_RESERVEDF_INDEX                       0x0000000F
#define ATOM_MAX_SUPPORTED_DEVICE_INFO                    (ATOM_DEVICE_DFP3_INDEX+1)
#define ATOM_MAX_SUPPORTED_DEVICE_INFO_2                  ATOM_MAX_SUPPORTED_DEVICE_INFO
#define ATOM_MAX_SUPPORTED_DEVICE_INFO_3                  (ATOM_DEVICE_DFP5_INDEX + 1)

#define ATOM_MAX_SUPPORTED_DEVICE                         (ATOM_DEVICE_RESERVEDF_INDEX+1)

#define ATOM_DEVICE_CRT1_SUPPORT                          (0x1L << ATOM_DEVICE_CRT1_INDEX)
#define ATOM_DEVICE_LCD1_SUPPORT                          (0x1L << ATOM_DEVICE_LCD1_INDEX)
#define ATOM_DEVICE_TV1_SUPPORT                           (0x1L << ATOM_DEVICE_TV1_INDEX)
#define ATOM_DEVICE_DFP1_SUPPORT                          (0x1L << ATOM_DEVICE_DFP1_INDEX)
#define ATOM_DEVICE_CRT2_SUPPORT                          (0x1L << ATOM_DEVICE_CRT2_INDEX)
#define ATOM_DEVICE_LCD2_SUPPORT                          (0x1L << ATOM_DEVICE_LCD2_INDEX)
#define ATOM_DEVICE_TV2_SUPPORT                           (0x1L << ATOM_DEVICE_TV2_INDEX)
#define ATOM_DEVICE_DFP2_SUPPORT                          (0x1L << ATOM_DEVICE_DFP2_INDEX)
#define ATOM_DEVICE_CV_SUPPORT                            (0x1L << ATOM_DEVICE_CV_INDEX)
#define ATOM_DEVICE_DFP3_SUPPORT													(0x1L << ATOM_DEVICE_DFP3_INDEX)
#define ATOM_DEVICE_DFP4_SUPPORT													(0x1L << ATOM_DEVICE_DFP4_INDEX )
#define ATOM_DEVICE_DFP5_SUPPORT													(0x1L << ATOM_DEVICE_DFP5_INDEX)

#define ATOM_DEVICE_CRT_SUPPORT \
	(ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT)
#define ATOM_DEVICE_DFP_SUPPORT \
	(ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | \
	 ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | \
	 ATOM_DEVICE_DFP5_SUPPORT)
#define ATOM_DEVICE_TV_SUPPORT \
	(ATOM_DEVICE_TV1_SUPPORT  | ATOM_DEVICE_TV2_SUPPORT)
#define ATOM_DEVICE_LCD_SUPPORT \
	(ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT)

#define ATOM_DEVICE_CONNECTOR_TYPE_MASK                   0x000000F0
#define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT                  0x00000004
#define ATOM_DEVICE_CONNECTOR_VGA                         0x00000001
#define ATOM_DEVICE_CONNECTOR_DVI_I                       0x00000002
#define ATOM_DEVICE_CONNECTOR_DVI_D                       0x00000003
#define ATOM_DEVICE_CONNECTOR_DVI_A                       0x00000004
#define ATOM_DEVICE_CONNECTOR_SVIDEO                      0x00000005
#define ATOM_DEVICE_CONNECTOR_COMPOSITE                   0x00000006
#define ATOM_DEVICE_CONNECTOR_LVDS                        0x00000007
#define ATOM_DEVICE_CONNECTOR_DIGI_LINK                   0x00000008
#define ATOM_DEVICE_CONNECTOR_SCART                       0x00000009
#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A                 0x0000000A
#define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B                 0x0000000B
#define ATOM_DEVICE_CONNECTOR_CASE_1                      0x0000000E
#define ATOM_DEVICE_CONNECTOR_DISPLAYPORT                 0x0000000F

#define ATOM_DEVICE_DAC_INFO_MASK                         0x0000000F
#define ATOM_DEVICE_DAC_INFO_SHIFT                        0x00000000
#define ATOM_DEVICE_DAC_INFO_NODAC                        0x00000000
#define ATOM_DEVICE_DAC_INFO_DACA                         0x00000001
#define ATOM_DEVICE_DAC_INFO_DACB                         0x00000002
#define ATOM_DEVICE_DAC_INFO_EXDAC                        0x00000003

#define ATOM_DEVICE_I2C_ID_NOI2C                          0x00000000

#define ATOM_DEVICE_I2C_LINEMUX_MASK                      0x0000000F
#define ATOM_DEVICE_I2C_LINEMUX_SHIFT                     0x00000000

#define ATOM_DEVICE_I2C_ID_MASK                           0x00000070
#define ATOM_DEVICE_I2C_ID_SHIFT                          0x00000004
#define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE              0x00000001
#define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE                  0x00000002
#define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE                0x00000003	/* For IGP RS600 */
#define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL                 0x00000004	/* For IGP RS690 */

#define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK                 0x00000080
#define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT                0x00000007
#define	ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C            0x00000000
#define	ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C            0x00000001

/*   usDeviceSupport: */
/*   Bits0       = 0 - no CRT1 support= 1- CRT1 is supported */
/*   Bit 1       = 0 - no LCD1 support= 1- LCD1 is supported */
/*   Bit 2       = 0 - no TV1  support= 1- TV1  is supported */
/*   Bit 3       = 0 - no DFP1 support= 1- DFP1 is supported */
/*   Bit 4       = 0 - no CRT2 support= 1- CRT2 is supported */
/*   Bit 5       = 0 - no LCD2 support= 1- LCD2 is supported */
/*   Bit 6       = 0 - no TV2  support= 1- TV2  is supported */
/*   Bit 7       = 0 - no DFP2 support= 1- DFP2 is supported */
/*   Bit 8       = 0 - no CV   support= 1- CV   is supported */
/*   Bit 9       = 0 - no DFP3 support= 1- DFP3 is supported */
/*   Byte1 (Supported Device Info) */
/*   Bit 0       = = 0 - no CV support= 1- CV is supported */
/*  */
/*  */

/*               ucI2C_ConfigID */
/*     [7:0] - I2C LINE Associate ID */
/*           = 0   - no I2C */
/*     [7]               -       HW_Cap        = 1,  [6:0]=HW assisted I2C ID(HW line selection) */
/*                           =   0,  [6:0]=SW assisted I2C ID */
/*     [6-4]     - HW_ENGINE_ID  =       1,  HW engine for NON multimedia use */
/*                           =   2,      HW engine for Multimedia use */
/*                           =   3-7     Reserved for future I2C engines */
/*               [3-0] - I2C_LINE_MUX  = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C */

typedef struct _ATOM_I2C_ID_CONFIG {
#if ATOM_BIG_ENDIAN
	UCHAR bfHW_Capable:1;
	UCHAR bfHW_EngineID:3;
	UCHAR bfI2C_LineMux:4;
#else
	UCHAR bfI2C_LineMux:4;
	UCHAR bfHW_EngineID:3;
	UCHAR bfHW_Capable:1;
#endif
} ATOM_I2C_ID_CONFIG;

typedef union _ATOM_I2C_ID_CONFIG_ACCESS {
	ATOM_I2C_ID_CONFIG sbfAccess;
	UCHAR ucAccess;
} ATOM_I2C_ID_CONFIG_ACCESS;

/****************************************************************************/
/*  Structure used in GPIO_I2C_InfoTable */
/****************************************************************************/
typedef struct _ATOM_GPIO_I2C_ASSIGMENT {
	USHORT usClkMaskRegisterIndex;
	USHORT usClkEnRegisterIndex;
	USHORT usClkY_RegisterIndex;
	USHORT usClkA_RegisterIndex;
	USHORT usDataMaskRegisterIndex;
	USHORT usDataEnRegisterIndex;
	USHORT usDataY_RegisterIndex;
	USHORT usDataA_RegisterIndex;
	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
	UCHAR ucClkMaskShift;
	UCHAR ucClkEnShift;
	UCHAR ucClkY_Shift;
	UCHAR ucClkA_Shift;
	UCHAR ucDataMaskShift;
	UCHAR ucDataEnShift;
	UCHAR ucDataY_Shift;
	UCHAR ucDataA_Shift;
	UCHAR ucReserved1;
	UCHAR ucReserved2;
} ATOM_GPIO_I2C_ASSIGMENT;

typedef struct _ATOM_GPIO_I2C_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE];
} ATOM_GPIO_I2C_INFO;

/****************************************************************************/
/*  Common Structure used in other structures */
/****************************************************************************/

#ifndef _H2INC

/* Please don't add or expand this bitfield structure below, this one will retire soon.! */
typedef struct _ATOM_MODE_MISC_INFO {
#if ATOM_BIG_ENDIAN
	USHORT Reserved:6;
	USHORT RGB888:1;
	USHORT DoubleClock:1;
	USHORT Interlace:1;
	USHORT CompositeSync:1;
	USHORT V_ReplicationBy2:1;
	USHORT H_ReplicationBy2:1;
	USHORT VerticalCutOff:1;
	USHORT VSyncPolarity:1;	/* 0=Active High, 1=Active Low */
	USHORT HSyncPolarity:1;	/* 0=Active High, 1=Active Low */
	USHORT HorizontalCutOff:1;
#else
	USHORT HorizontalCutOff:1;
	USHORT HSyncPolarity:1;	/* 0=Active High, 1=Active Low */
	USHORT VSyncPolarity:1;	/* 0=Active High, 1=Active Low */
	USHORT VerticalCutOff:1;
	USHORT H_ReplicationBy2:1;
	USHORT V_ReplicationBy2:1;
	USHORT CompositeSync:1;
	USHORT Interlace:1;
	USHORT DoubleClock:1;
	USHORT RGB888:1;
	USHORT Reserved:6;
#endif
} ATOM_MODE_MISC_INFO;

typedef union _ATOM_MODE_MISC_INFO_ACCESS {
	ATOM_MODE_MISC_INFO sbfAccess;
	USHORT usAccess;
} ATOM_MODE_MISC_INFO_ACCESS;

#else

typedef union _ATOM_MODE_MISC_INFO_ACCESS {
	USHORT usAccess;
} ATOM_MODE_MISC_INFO_ACCESS;

#endif

/*  usModeMiscInfo- */
#define ATOM_H_CUTOFF           0x01
#define ATOM_HSYNC_POLARITY     0x02	/* 0=Active High, 1=Active Low */
#define ATOM_VSYNC_POLARITY     0x04	/* 0=Active High, 1=Active Low */
#define ATOM_V_CUTOFF           0x08
#define ATOM_H_REPLICATIONBY2   0x10
#define ATOM_V_REPLICATIONBY2   0x20
#define ATOM_COMPOSITESYNC      0x40
#define ATOM_INTERLACE          0x80
#define ATOM_DOUBLE_CLOCK_MODE  0x100
#define ATOM_RGB888_MODE        0x200

/* usRefreshRate- */
#define ATOM_REFRESH_43         43
#define ATOM_REFRESH_47         47
#define ATOM_REFRESH_56         56
#define ATOM_REFRESH_60         60
#define ATOM_REFRESH_65         65
#define ATOM_REFRESH_70         70
#define ATOM_REFRESH_72         72
#define ATOM_REFRESH_75         75
#define ATOM_REFRESH_85         85

/*  ATOM_MODE_TIMING data are exactly the same as VESA timing data. */
/*  Translation from EDID to ATOM_MODE_TIMING, use the following formula. */
/*  */
/*       VESA_HTOTAL                     =       VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK */
/*                                               =       EDID_HA + EDID_HBL */
/*       VESA_HDISP                      =       VESA_ACTIVE     =       EDID_HA */
/*       VESA_HSYNC_START        =       VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH */
/*                                               =       EDID_HA + EDID_HSO */
/*       VESA_HSYNC_WIDTH        =       VESA_HSYNC_TIME =       EDID_HSPW */
/*       VESA_BORDER                     =       EDID_BORDER */

/****************************************************************************/
/*  Structure used in SetCRTC_UsingDTDTimingTable */
/****************************************************************************/
typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS {
	USHORT usH_Size;
	USHORT usH_Blanking_Time;
	USHORT usV_Size;
	USHORT usV_Blanking_Time;
	USHORT usH_SyncOffset;
	USHORT usH_SyncWidth;
	USHORT usV_SyncOffset;
	USHORT usV_SyncWidth;
	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
	UCHAR ucH_Border;	/*  From DFP EDID */
	UCHAR ucV_Border;
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucPadding[3];
} SET_CRTC_USING_DTD_TIMING_PARAMETERS;

/****************************************************************************/
/*  Structure used in SetCRTC_TimingTable */
/****************************************************************************/
typedef struct _SET_CRTC_TIMING_PARAMETERS {
	USHORT usH_Total;	/*  horizontal total */
	USHORT usH_Disp;	/*  horizontal display */
	USHORT usH_SyncStart;	/*  horozontal Sync start */
	USHORT usH_SyncWidth;	/*  horizontal Sync width */
	USHORT usV_Total;	/*  vertical total */
	USHORT usV_Disp;	/*  vertical display */
	USHORT usV_SyncStart;	/*  vertical Sync start */
	USHORT usV_SyncWidth;	/*  vertical Sync width */
	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
	UCHAR ucCRTC;		/*  ATOM_CRTC1 or ATOM_CRTC2 */
	UCHAR ucOverscanRight;	/*  right */
	UCHAR ucOverscanLeft;	/*  left */
	UCHAR ucOverscanBottom;	/*  bottom */
	UCHAR ucOverscanTop;	/*  top */
	UCHAR ucReserved;
} SET_CRTC_TIMING_PARAMETERS;
#define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS

/****************************************************************************/
/*  Structure used in StandardVESA_TimingTable */
/*                    AnalogTV_InfoTable */
/*                    ComponentVideoInfoTable */
/****************************************************************************/
typedef struct _ATOM_MODE_TIMING {
	USHORT usCRTC_H_Total;
	USHORT usCRTC_H_Disp;
	USHORT usCRTC_H_SyncStart;
	USHORT usCRTC_H_SyncWidth;
	USHORT usCRTC_V_Total;
	USHORT usCRTC_V_Disp;
	USHORT usCRTC_V_SyncStart;
	USHORT usCRTC_V_SyncWidth;
	USHORT usPixelClock;	/* in 10Khz unit */
	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
	USHORT usCRTC_OverscanRight;
	USHORT usCRTC_OverscanLeft;
	USHORT usCRTC_OverscanBottom;
	USHORT usCRTC_OverscanTop;
	USHORT usReserve;
	UCHAR ucInternalModeNumber;
	UCHAR ucRefreshRate;
} ATOM_MODE_TIMING;

typedef struct _ATOM_DTD_FORMAT {
	USHORT usPixClk;
	USHORT usHActive;
	USHORT usHBlanking_Time;
	USHORT usVActive;
	USHORT usVBlanking_Time;
	USHORT usHSyncOffset;
	USHORT usHSyncWidth;
	USHORT usVSyncOffset;
	USHORT usVSyncWidth;
	USHORT usImageHSize;
	USHORT usImageVSize;
	UCHAR ucHBorder;
	UCHAR ucVBorder;
	ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo;
	UCHAR ucInternalModeNumber;
	UCHAR ucRefreshRate;
} ATOM_DTD_FORMAT;

/****************************************************************************/
/*  Structure used in LVDS_InfoTable */
/*   * Need a document to describe this table */
/****************************************************************************/
#define SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
#define SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
#define SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
#define SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020

/* Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. */
/* Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL */
#define	LCDPANEL_CAP_READ_EDID									0x1

/* ucTableFormatRevision=1 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_LVDS_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_DTD_FORMAT sLCDTiming;
	USHORT usModePatchTableOffset;
	USHORT usSupportedRefreshRate;	/* Refer to panel info table in ATOMBIOS extension Spec. */
	USHORT usOffDelayInMs;
	UCHAR ucPowerSequenceDigOntoDEin10Ms;
	UCHAR ucPowerSequenceDEtoBLOnin10Ms;
	UCHAR ucLVDS_Misc;	/*  Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
	/*  Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
	/*  Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
	/*  Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
	UCHAR ucPanelDefaultRefreshRate;
	UCHAR ucPanelIdentification;
	UCHAR ucSS_Id;
} ATOM_LVDS_INFO;

/* ucTableFormatRevision=1 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_LVDS_INFO_V12 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_DTD_FORMAT sLCDTiming;
	USHORT usExtInfoTableOffset;
	USHORT usSupportedRefreshRate;	/* Refer to panel info table in ATOMBIOS extension Spec. */
	USHORT usOffDelayInMs;
	UCHAR ucPowerSequenceDigOntoDEin10Ms;
	UCHAR ucPowerSequenceDEtoBLOnin10Ms;
	UCHAR ucLVDS_Misc;	/*  Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} */
	/*  Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} */
	/*  Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} */
	/*  Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} */
	UCHAR ucPanelDefaultRefreshRate;
	UCHAR ucPanelIdentification;
	UCHAR ucSS_Id;
	USHORT usLCDVenderID;
	USHORT usLCDProductID;
	UCHAR ucLCDPanel_SpecialHandlingCap;
	UCHAR ucPanelInfoSize;	/*   start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable */
	UCHAR ucReserved[2];
} ATOM_LVDS_INFO_V12;

#define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12

typedef struct _ATOM_PATCH_RECORD_MODE {
	UCHAR ucRecordType;
	USHORT usHDisp;
	USHORT usVDisp;
} ATOM_PATCH_RECORD_MODE;

typedef struct _ATOM_LCD_RTS_RECORD {
	UCHAR ucRecordType;
	UCHAR ucRTSValue;
} ATOM_LCD_RTS_RECORD;

/* !! If the record below exits, it shoud always be the first record for easy use in command table!!! */
typedef struct _ATOM_LCD_MODE_CONTROL_CAP {
	UCHAR ucRecordType;
	USHORT usLCDCap;
} ATOM_LCD_MODE_CONTROL_CAP;

#define LCD_MODE_CAP_BL_OFF                   1
#define LCD_MODE_CAP_CRTC_OFF                 2
#define LCD_MODE_CAP_PANEL_OFF                4

typedef struct _ATOM_FAKE_EDID_PATCH_RECORD {
	UCHAR ucRecordType;
	UCHAR ucFakeEDIDLength;
	UCHAR ucFakeEDIDString[1];	/*  This actually has ucFakeEdidLength elements. */
} ATOM_FAKE_EDID_PATCH_RECORD;

typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD {
	UCHAR ucRecordType;
	USHORT usHSize;
	USHORT usVSize;
} ATOM_PANEL_RESOLUTION_PATCH_RECORD;

#define LCD_MODE_PATCH_RECORD_MODE_TYPE       1
#define LCD_RTS_RECORD_TYPE                   2
#define LCD_CAP_RECORD_TYPE                   3
#define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
#define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
#define ATOM_RECORD_END_TYPE                  0xFF

/****************************Spread Spectrum Info Table Definitions **********************/

/* ucTableFormatRevision=1 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT {
	USHORT usSpreadSpectrumPercentage;
	UCHAR ucSpreadSpectrumType;	/* Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD */
	UCHAR ucSS_Step;
	UCHAR ucSS_Delay;
	UCHAR ucSS_Id;
	UCHAR ucRecommendedRef_Div;
	UCHAR ucSS_Range;	/* it was reserved for V11 */
} ATOM_SPREAD_SPECTRUM_ASSIGNMENT;

#define ATOM_MAX_SS_ENTRY                      16
#define ATOM_DP_SS_ID1												 0x0f1	/*  SS modulation freq=30k */
#define ATOM_DP_SS_ID2												 0x0f2	/*  SS modulation freq=33k */

#define ATOM_SS_DOWN_SPREAD_MODE_MASK          0x00000000
#define ATOM_SS_DOWN_SPREAD_MODE               0x00000000
#define ATOM_SS_CENTRE_SPREAD_MODE_MASK        0x00000001
#define ATOM_SS_CENTRE_SPREAD_MODE             0x00000001
#define ATOM_INTERNAL_SS_MASK                  0x00000000
#define ATOM_EXTERNAL_SS_MASK                  0x00000002
#define EXEC_SS_STEP_SIZE_SHIFT                2
#define EXEC_SS_DELAY_SHIFT                    4
#define ACTIVEDATA_TO_BLON_DELAY_SHIFT         4

typedef struct _ATOM_SPREAD_SPECTRUM_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY];
} ATOM_SPREAD_SPECTRUM_INFO;

/****************************************************************************/
/*  Structure used in AnalogTV_InfoTable (Top level) */
/****************************************************************************/
/* ucTVBootUpDefaultStd definiton: */

/* ATOM_TV_NTSC                1 */
/* ATOM_TV_NTSCJ               2 */
/* ATOM_TV_PAL                 3 */
/* ATOM_TV_PALM                4 */
/* ATOM_TV_PALCN               5 */
/* ATOM_TV_PALN                6 */
/* ATOM_TV_PAL60               7 */
/* ATOM_TV_SECAM               8 */

/* ucTVSuppportedStd definition: */
#define NTSC_SUPPORT          0x1
#define NTSCJ_SUPPORT         0x2

#define PAL_SUPPORT           0x4
#define PALM_SUPPORT          0x8
#define PALCN_SUPPORT         0x10
#define PALN_SUPPORT          0x20
#define PAL60_SUPPORT         0x40
#define SECAM_SUPPORT         0x80

#define MAX_SUPPORTED_TV_TIMING    2

typedef struct _ATOM_ANALOG_TV_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucTV_SupportedStandard;
	UCHAR ucTV_BootUpDefaultStandard;
	UCHAR ucExt_TV_ASIC_ID;
	UCHAR ucExt_TV_ASIC_SlaveAddr;
	/*ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING]; */
	ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING];
} ATOM_ANALOG_TV_INFO;

#define MAX_SUPPORTED_TV_TIMING_V1_2    3

typedef struct _ATOM_ANALOG_TV_INFO_V1_2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR                    ucTV_SupportedStandard;
	UCHAR                    ucTV_BootUpDefaultStandard;
	UCHAR                    ucExt_TV_ASIC_ID;
	UCHAR                    ucExt_TV_ASIC_SlaveAddr;
	ATOM_DTD_FORMAT          aModeTimings[MAX_SUPPORTED_TV_TIMING];
} ATOM_ANALOG_TV_INFO_V1_2;

/**************************************************************************/
/*  VRAM usage and their defintions */

/*  One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
/*  Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
/*  All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! */
/*  To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR */
/*  To Bios:  ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX */

#ifndef VESA_MEMORY_IN_64K_BLOCK
#define VESA_MEMORY_IN_64K_BLOCK        0x100	/* 256*64K=16Mb (Max. VESA memory is 16Mb!) */
#endif

#define ATOM_EDID_RAW_DATASIZE          256	/* In Bytes */
#define ATOM_HWICON_SURFACE_SIZE        4096	/* In Bytes */
#define ATOM_HWICON_INFOTABLE_SIZE      32
#define MAX_DTD_MODE_IN_VRAM            6
#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE  (MAX_DTD_MODE_IN_VRAM*28)	/* 28= (SIZEOF ATOM_DTD_FORMAT) */
#define ATOM_STD_MODE_SUPPORT_TBL_SIZE  (32*8)	/* 32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) */
#define DFP_ENCODER_TYPE_OFFSET					0x80
#define DP_ENCODER_LANE_NUM_OFFSET			0x84
#define DP_ENCODER_LINK_RATE_OFFSET			0x88

#define ATOM_HWICON1_SURFACE_ADDR       0
#define ATOM_HWICON2_SURFACE_ADDR       (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
#define ATOM_HWICON_INFOTABLE_ADDR      (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
#define ATOM_CRT1_EDID_ADDR             (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
#define ATOM_CRT1_DTD_MODE_TBL_ADDR     (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_CRT1_STD_MODE_TBL_ADDR	    (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_LCD1_EDID_ADDR             (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_LCD1_DTD_MODE_TBL_ADDR     (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_LCD1_STD_MODE_TBL_ADDR	(ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_TV1_DTD_MODE_TBL_ADDR      (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DFP1_EDID_ADDR             (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_DFP1_DTD_MODE_TBL_ADDR     (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP1_STD_MODE_TBL_ADDR	    (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_CRT2_EDID_ADDR             (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_CRT2_DTD_MODE_TBL_ADDR     (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_CRT2_STD_MODE_TBL_ADDR	    (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_LCD2_EDID_ADDR             (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_LCD2_DTD_MODE_TBL_ADDR     (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_LCD2_STD_MODE_TBL_ADDR	(ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_TV2_EDID_ADDR              (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_TV2_DTD_MODE_TBL_ADDR      (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_TV2_STD_MODE_TBL_ADDR	  (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DFP2_EDID_ADDR             (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_DFP2_DTD_MODE_TBL_ADDR     (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP2_STD_MODE_TBL_ADDR     (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_CV_EDID_ADDR               (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_CV_DTD_MODE_TBL_ADDR       (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_CV_STD_MODE_TBL_ADDR       (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DFP3_EDID_ADDR             (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_DFP3_DTD_MODE_TBL_ADDR     (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP3_STD_MODE_TBL_ADDR     (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DFP4_EDID_ADDR             (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_DFP4_DTD_MODE_TBL_ADDR     (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP4_STD_MODE_TBL_ADDR     (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DFP5_EDID_ADDR             (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
#define ATOM_DFP5_DTD_MODE_TBL_ADDR     (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP5_STD_MODE_TBL_ADDR     (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_DP_TRAINING_TBL_ADDR	(ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)

#define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR + 256)
#define ATOM_STACK_STORAGE_END          (ATOM_STACK_STORAGE_START + 512)

/* The size below is in Kb! */
#define ATOM_VRAM_RESERVE_SIZE         ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)

#define	ATOM_VRAM_OPERATION_FLAGS_MASK         0xC0000000L
#define ATOM_VRAM_OPERATION_FLAGS_SHIFT        30
#define	ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION   0x1
#define	ATOM_VRAM_BLOCK_NEEDS_RESERVATION      0x0

/***********************************************************************************/
/*  Structure used in VRAM_UsageByFirmwareTable */
/*  Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm */
/*         at running time. */
/*  note2: From RV770, the memory is more than 32bit addressable, so we will change */
/*         ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains */
/*         exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware */
/*         (in offset to start of memory address) is KB aligned instead of byte aligend. */
/***********************************************************************************/
#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO			1

typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO {
	ULONG ulStartAddrUsedByFirmware;
	USHORT usFirmwareUseInKb;
	USHORT usReserved;
} ATOM_FIRMWARE_VRAM_RESERVE_INFO;

typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_FIRMWARE_VRAM_RESERVE_INFO
	    asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO];
} ATOM_VRAM_USAGE_BY_FIRMWARE;

/****************************************************************************/
/*  Structure used in GPIO_Pin_LUTTable */
/****************************************************************************/
typedef struct _ATOM_GPIO_PIN_ASSIGNMENT {
	USHORT usGpioPin_AIndex;
	UCHAR ucGpioPinBitShift;
	UCHAR ucGPIO_ID;
} ATOM_GPIO_PIN_ASSIGNMENT;

typedef struct _ATOM_GPIO_PIN_LUT {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1];
} ATOM_GPIO_PIN_LUT;

/****************************************************************************/
/*  Structure used in ComponentVideoInfoTable */
/****************************************************************************/
#define GPIO_PIN_ACTIVE_HIGH          0x1

#define MAX_SUPPORTED_CV_STANDARDS    5

/*  definitions for ATOM_D_INFO.ucSettings */
#define ATOM_GPIO_SETTINGS_BITSHIFT_MASK  0x1F	/*  [4:0] */
#define ATOM_GPIO_SETTINGS_RESERVED_MASK  0x60	/*  [6:5] = must be zeroed out */
#define ATOM_GPIO_SETTINGS_ACTIVE_MASK    0x80	/*  [7] */

typedef struct _ATOM_GPIO_INFO {
	USHORT usAOffset;
	UCHAR ucSettings;
	UCHAR ucReserved;
} ATOM_GPIO_INFO;

/*  definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) */
#define ATOM_CV_RESTRICT_FORMAT_SELECTION           0x2

/*  definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i */
#define ATOM_GPIO_DEFAULT_MODE_EN                   0x80	/* [7]; */
#define ATOM_GPIO_SETTING_PERMODE_MASK              0x7F	/* [6:0] */

/*  definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode */
/* Line 3 out put 5V. */
#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A       0x01	/* represent gpio 3 state for 16:9 */
#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B       0x02	/* represent gpio 4 state for 16:9 */
#define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT   0x0

/* Line 3 out put 2.2V */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04	/* represent gpio 3 state for 4:3 Letter box */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08	/* represent gpio 4 state for 4:3 Letter box */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2

/* Line 3 out put 0V */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A        0x10	/* represent gpio 3 state for 4:3 */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B        0x20	/* represent gpio 4 state for 4:3 */
#define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT    0x4

#define ATOM_CV_LINE3_ASPECTRATIO_MASK              0x3F	/*  bit [5:0] */

#define ATOM_CV_LINE3_ASPECTRATIO_EXIST             0x80	/* bit 7 */

/* GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. */
#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A   3	/* bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */
#define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B   4	/* bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. */

typedef struct _ATOM_COMPONENT_VIDEO_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usMask_PinRegisterIndex;
	USHORT usEN_PinRegisterIndex;
	USHORT usY_PinRegisterIndex;
	USHORT usA_PinRegisterIndex;
	UCHAR ucBitShift;
	UCHAR ucPinActiveState;	/* ucPinActiveState: Bit0=1 active high, =0 active low */
	ATOM_DTD_FORMAT sReserved;	/*  must be zeroed out */
	UCHAR ucMiscInfo;
	UCHAR uc480i;
	UCHAR uc480p;
	UCHAR uc720p;
	UCHAR uc1080i;
	UCHAR ucLetterBoxMode;
	UCHAR ucReserved[3];
	UCHAR ucNumOfWbGpioBlocks;	/* For Component video D-Connector support. If zere, NTSC type connector */
	ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
	ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
} ATOM_COMPONENT_VIDEO_INFO;

/* ucTableFormatRevision=2 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucMiscInfo;
	UCHAR uc480i;
	UCHAR uc480p;
	UCHAR uc720p;
	UCHAR uc1080i;
	UCHAR ucReserved;
	UCHAR ucLetterBoxMode;
	UCHAR ucNumOfWbGpioBlocks;	/* For Component video D-Connector support. If zere, NTSC type connector */
	ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS];
	ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS];
} ATOM_COMPONENT_VIDEO_INFO_V21;

#define ATOM_COMPONENT_VIDEO_INFO_LAST  ATOM_COMPONENT_VIDEO_INFO_V21

/****************************************************************************/
/*  Structure used in object_InfoTable */
/****************************************************************************/
typedef struct _ATOM_OBJECT_HEADER {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usDeviceSupport;
	USHORT usConnectorObjectTableOffset;
	USHORT usRouterObjectTableOffset;
	USHORT usEncoderObjectTableOffset;
	USHORT usProtectionObjectTableOffset;	/* only available when Protection block is independent. */
	USHORT usDisplayPathTableOffset;
} ATOM_OBJECT_HEADER;

typedef struct _ATOM_DISPLAY_OBJECT_PATH {
	USHORT usDeviceTag;	/* supported device */
	USHORT usSize;		/* the size of ATOM_DISPLAY_OBJECT_PATH */
	USHORT usConnObjectId;	/* Connector Object ID */
	USHORT usGPUObjectId;	/* GPU ID */
	USHORT usGraphicObjIds[1];	/* 1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. */
} ATOM_DISPLAY_OBJECT_PATH;

typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE {
	UCHAR ucNumOfDispPath;
	UCHAR ucVersion;
	UCHAR ucPadding[2];
	ATOM_DISPLAY_OBJECT_PATH asDispPath[1];
} ATOM_DISPLAY_OBJECT_PATH_TABLE;

typedef struct _ATOM_OBJECT	/* each object has this structure */
{
	USHORT usObjectID;
	USHORT usSrcDstTableOffset;
	USHORT usRecordOffset;	/* this pointing to a bunch of records defined below */
	USHORT usReserved;
} ATOM_OBJECT;

typedef struct _ATOM_OBJECT_TABLE	/* Above 4 object table offset pointing to a bunch of objects all have this structure */
{
	UCHAR ucNumberOfObjects;
	UCHAR ucPadding[3];
	ATOM_OBJECT asObjects[1];
} ATOM_OBJECT_TABLE;

typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT	/* usSrcDstTableOffset pointing to this structure */
{
	UCHAR ucNumberOfSrc;
	USHORT usSrcObjectID[1];
	UCHAR ucNumberOfDst;
	USHORT usDstObjectID[1];
} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;

/* Related definitions, all records are differnt but they have a commond header */
typedef struct _ATOM_COMMON_RECORD_HEADER {
	UCHAR ucRecordType;	/* An emun to indicate the record type */
	UCHAR ucRecordSize;	/* The size of the whole record in byte */
} ATOM_COMMON_RECORD_HEADER;

#define ATOM_I2C_RECORD_TYPE                           1
#define ATOM_HPD_INT_RECORD_TYPE                       2
#define ATOM_OUTPUT_PROTECTION_RECORD_TYPE             3
#define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE          4
#define	ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE	     5	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
#define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE          6	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
#define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE      7
#define ATOM_JTAG_RECORD_TYPE                          8	/* Obsolete, switch to use GPIO_CNTL_RECORD_TYPE */
#define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE              9
#define ATOM_ENCODER_DVO_CF_RECORD_TYPE               10
#define ATOM_CONNECTOR_CF_RECORD_TYPE                 11
#define	ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE	      12
#define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE  13
#define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE				14
#define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE					15

/* Must be updated when new record type is added,equal to that record definition! */
#define ATOM_MAX_OBJECT_RECORD_NUMBER             ATOM_CONNECTOR_CF_RECORD_TYPE

typedef struct _ATOM_I2C_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	ATOM_I2C_ID_CONFIG sucI2cId;
	UCHAR ucI2CAddr;	/* The slave address, it's 0 when the record is attached to connector for DDC */
} ATOM_I2C_RECORD;

typedef struct _ATOM_HPD_INT_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucHPDIntGPIOID;	/* Corresponding block in GPIO_PIN_INFO table gives the pin info */
	UCHAR ucPlugged_PinState;
} ATOM_HPD_INT_RECORD;

typedef struct _ATOM_OUTPUT_PROTECTION_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucProtectionFlag;
	UCHAR ucReserved;
} ATOM_OUTPUT_PROTECTION_RECORD;

typedef struct _ATOM_CONNECTOR_DEVICE_TAG {
	ULONG ulACPIDeviceEnum;	/* Reserved for now */
	USHORT usDeviceID;	/* This Id is same as "ATOM_DEVICE_XXX_SUPPORT" */
	USHORT usPadding;
} ATOM_CONNECTOR_DEVICE_TAG;

typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucNumberOfDevice;
	UCHAR ucReserved;
	ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1];	/* This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation */
} ATOM_CONNECTOR_DEVICE_TAG_RECORD;

typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucConfigGPIOID;
	UCHAR ucConfigGPIOState;	/* Set to 1 when it's active high to enable external flow in */
	UCHAR ucFlowinGPIPID;
	UCHAR ucExtInGPIPID;
} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD;

typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucCTL1GPIO_ID;
	UCHAR ucCTL1GPIOState;	/* Set to 1 when it's active high */
	UCHAR ucCTL2GPIO_ID;
	UCHAR ucCTL2GPIOState;	/* Set to 1 when it's active high */
	UCHAR ucCTL3GPIO_ID;
	UCHAR ucCTL3GPIOState;	/* Set to 1 when it's active high */
	UCHAR ucCTLFPGA_IN_ID;
	UCHAR ucPadding[3];
} ATOM_ENCODER_FPGA_CONTROL_RECORD;

typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucGPIOID;		/* Corresponding block in GPIO_PIN_INFO table gives the pin info */
	UCHAR ucTVActiveState;	/* Indicating when the pin==0 or 1 when TV is connected */
} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD;

typedef struct _ATOM_JTAG_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucTMSGPIO_ID;
	UCHAR ucTMSGPIOState;	/* Set to 1 when it's active high */
	UCHAR ucTCKGPIO_ID;
	UCHAR ucTCKGPIOState;	/* Set to 1 when it's active high */
	UCHAR ucTDOGPIO_ID;
	UCHAR ucTDOGPIOState;	/* Set to 1 when it's active high */
	UCHAR ucTDIGPIO_ID;
	UCHAR ucTDIGPIOState;	/* Set to 1 when it's active high */
	UCHAR ucPadding[2];
} ATOM_JTAG_RECORD;

/* The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually */
typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR {
	UCHAR ucGPIOID;		/*  GPIO_ID, find the corresponding ID in GPIO_LUT table */
	UCHAR ucGPIO_PinState;	/*  Pin state showing how to set-up the pin */
} ATOM_GPIO_PIN_CONTROL_PAIR;

typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucFlags;		/*  Future expnadibility */
	UCHAR ucNumberOfPins;	/*  Number of GPIO pins used to control the object */
	ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1];	/*  the real gpio pin pair determined by number of pins ucNumberOfPins */
} ATOM_OBJECT_GPIO_CNTL_RECORD;

/* Definitions for GPIO pin state */
#define GPIO_PIN_TYPE_INPUT             0x00
#define GPIO_PIN_TYPE_OUTPUT            0x10
#define GPIO_PIN_TYPE_HW_CONTROL        0x20

/* For GPIO_PIN_TYPE_OUTPUT the following is defined */
#define GPIO_PIN_OUTPUT_STATE_MASK      0x01
#define GPIO_PIN_OUTPUT_STATE_SHIFT     0
#define GPIO_PIN_STATE_ACTIVE_LOW       0x0
#define GPIO_PIN_STATE_ACTIVE_HIGH      0x1

typedef struct _ATOM_ENCODER_DVO_CF_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	ULONG ulStrengthControl;	/*  DVOA strength control for CF */
	UCHAR ucPadding[2];
} ATOM_ENCODER_DVO_CF_RECORD;

/*  value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle */
#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA   1
#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB   2

typedef struct _ATOM_CONNECTOR_CF_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	USHORT usMaxPixClk;
	UCHAR ucFlowCntlGpioId;
	UCHAR ucSwapCntlGpioId;
	UCHAR ucConnectedDvoBundle;
	UCHAR ucPadding;
} ATOM_CONNECTOR_CF_RECORD;

typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	ATOM_DTD_FORMAT asTiming;
} ATOM_CONNECTOR_HARDCODE_DTD_RECORD;

typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;	/* ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE */
	UCHAR ucSubConnectorType;	/* CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A */
	UCHAR ucReserved;
} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD;

typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucMuxType;	/* decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state */
	UCHAR ucMuxControlPin;
	UCHAR ucMuxState[2];	/* for alligment purpose */
} ATOM_ROUTER_DDC_PATH_SELECT_RECORD;

typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD {
	ATOM_COMMON_RECORD_HEADER sheader;
	UCHAR ucMuxType;
	UCHAR ucMuxControlPin;
	UCHAR ucMuxState[2];	/* for alligment purpose */
} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD;

/*  define ucMuxType */
#define ATOM_ROUTER_MUX_PIN_STATE_MASK								0x0f
#define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT		0x01

/****************************************************************************/
/*  ASIC voltage data table */
/****************************************************************************/
typedef struct _ATOM_VOLTAGE_INFO_HEADER {
	USHORT usVDDCBaseLevel;	/* In number of 50mv unit */
	USHORT usReserved;	/* For possible extension table offset */
	UCHAR ucNumOfVoltageEntries;
	UCHAR ucBytesPerVoltageEntry;
	UCHAR ucVoltageStep;	/* Indicating in how many mv increament is one step, 0.5mv unit */
	UCHAR ucDefaultVoltageEntry;
	UCHAR ucVoltageControlI2cLine;
	UCHAR ucVoltageControlAddress;
	UCHAR ucVoltageControlOffset;
} ATOM_VOLTAGE_INFO_HEADER;

typedef struct _ATOM_VOLTAGE_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_VOLTAGE_INFO_HEADER viHeader;
	UCHAR ucVoltageEntries[64];	/* 64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry */
} ATOM_VOLTAGE_INFO;

typedef struct _ATOM_VOLTAGE_FORMULA {
	USHORT usVoltageBaseLevel;	/*  In number of 1mv unit */
	USHORT usVoltageStep;	/*  Indicating in how many mv increament is one step, 1mv unit */
	UCHAR ucNumOfVoltageEntries;	/*  Number of Voltage Entry, which indicate max Voltage */
	UCHAR ucFlag;		/*  bit0=0 :step is 1mv =1 0.5mv */
	UCHAR ucBaseVID;	/*  if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep */
	UCHAR ucReserved;
	UCHAR ucVIDAdjustEntries[32];	/*  32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries */
} ATOM_VOLTAGE_FORMULA;

typedef struct _ATOM_VOLTAGE_CONTROL {
	UCHAR ucVoltageControlId;	/* Indicate it is controlled by I2C or GPIO or HW state machine */
	UCHAR ucVoltageControlI2cLine;
	UCHAR ucVoltageControlAddress;
	UCHAR ucVoltageControlOffset;
	USHORT usGpioPin_AIndex;	/* GPIO_PAD register index */
	UCHAR ucGpioPinBitShift[9];	/* at most 8 pin support 255 VIDs, termintate with 0xff */
	UCHAR ucReserved;
} ATOM_VOLTAGE_CONTROL;

/*  Define ucVoltageControlId */
#define	VOLTAGE_CONTROLLED_BY_HW							0x00
#define	VOLTAGE_CONTROLLED_BY_I2C_MASK				0x7F
#define	VOLTAGE_CONTROLLED_BY_GPIO						0x80
#define	VOLTAGE_CONTROL_ID_LM64								0x01	/* I2C control, used for R5xx Core Voltage */
#define	VOLTAGE_CONTROL_ID_DAC								0x02	/* I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI */
#define	VOLTAGE_CONTROL_ID_VT116xM						0x03	/* I2C control, used for R6xx Core Voltage */
#define VOLTAGE_CONTROL_ID_DS4402							0x04

typedef struct _ATOM_VOLTAGE_OBJECT {
	UCHAR ucVoltageType;	/* Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI */
	UCHAR ucSize;		/* Size of Object */
	ATOM_VOLTAGE_CONTROL asControl;	/* describ how to control */
	ATOM_VOLTAGE_FORMULA asFormula;	/* Indicate How to convert real Voltage to VID */
} ATOM_VOLTAGE_OBJECT;

typedef struct _ATOM_VOLTAGE_OBJECT_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_VOLTAGE_OBJECT asVoltageObj[3];	/* Info for Voltage control */
} ATOM_VOLTAGE_OBJECT_INFO;

typedef struct _ATOM_LEAKID_VOLTAGE {
	UCHAR ucLeakageId;
	UCHAR ucReserved;
	USHORT usVoltage;
} ATOM_LEAKID_VOLTAGE;

typedef struct _ATOM_ASIC_PROFILE_VOLTAGE {
	UCHAR ucProfileId;
	UCHAR ucReserved;
	USHORT usSize;
	USHORT usEfuseSpareStartAddr;
	USHORT usFuseIndex[8];	/* from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, */
	ATOM_LEAKID_VOLTAGE asLeakVol[2];	/* Leakid and relatd voltage */
} ATOM_ASIC_PROFILE_VOLTAGE;

/* ucProfileId */
#define	ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE			1
#define	ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE			1
#define	ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE					2

typedef struct _ATOM_ASIC_PROFILING_INFO {
	ATOM_COMMON_TABLE_HEADER asHeader;
	ATOM_ASIC_PROFILE_VOLTAGE asVoltage;
} ATOM_ASIC_PROFILING_INFO;

typedef struct _ATOM_POWER_SOURCE_OBJECT {
	UCHAR ucPwrSrcId;	/*  Power source */
	UCHAR ucPwrSensorType;	/*  GPIO, I2C or none */
	UCHAR ucPwrSensId;	/*  if GPIO detect, it is GPIO id,  if I2C detect, it is I2C id */
	UCHAR ucPwrSensSlaveAddr;	/*  Slave address if I2C detect */
	UCHAR ucPwrSensRegIndex;	/*  I2C register Index if I2C detect */
	UCHAR ucPwrSensRegBitMask;	/*  detect which bit is used if I2C detect */
	UCHAR ucPwrSensActiveState;	/*  high active or low active */
	UCHAR ucReserve[3];	/*  reserve */
	USHORT usSensPwr;	/*  in unit of watt */
} ATOM_POWER_SOURCE_OBJECT;

typedef struct _ATOM_POWER_SOURCE_INFO {
	ATOM_COMMON_TABLE_HEADER asHeader;
	UCHAR asPwrbehave[16];
	ATOM_POWER_SOURCE_OBJECT asPwrObj[1];
} ATOM_POWER_SOURCE_INFO;

/* Define ucPwrSrcId */
#define POWERSOURCE_PCIE_ID1						0x00
#define POWERSOURCE_6PIN_CONNECTOR_ID1	0x01
#define POWERSOURCE_8PIN_CONNECTOR_ID1	0x02
#define POWERSOURCE_6PIN_CONNECTOR_ID2	0x04
#define POWERSOURCE_8PIN_CONNECTOR_ID2	0x08

/* define ucPwrSensorId */
#define POWER_SENSOR_ALWAYS							0x00
#define POWER_SENSOR_GPIO								0x01
#define POWER_SENSOR_I2C								0x02

/**************************************************************************/
/*  This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design */
/* Memory SS Info Table */
/* Define Memory Clock SS chip ID */
#define ICS91719  1
#define ICS91720  2

/* Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol */
typedef struct _ATOM_I2C_DATA_RECORD {
	UCHAR ucNunberOfBytes;	/* Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" */
	UCHAR ucI2CData[1];	/* I2C data in bytes, should be less than 16 bytes usually */
} ATOM_I2C_DATA_RECORD;

/* Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information */
typedef struct _ATOM_I2C_DEVICE_SETUP_INFO {
	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;	/* I2C line and HW/SW assisted cap. */
	UCHAR ucSSChipID;	/* SS chip being used */
	UCHAR ucSSChipSlaveAddr;	/* Slave Address to set up this SS chip */
	UCHAR ucNumOfI2CDataRecords;	/* number of data block */
	ATOM_I2C_DATA_RECORD asI2CData[1];
} ATOM_I2C_DEVICE_SETUP_INFO;

/* ========================================================================================== */
typedef struct _ATOM_ASIC_MVDD_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1];
} ATOM_ASIC_MVDD_INFO;

/* ========================================================================================== */
#define ATOM_MCLK_SS_INFO         ATOM_ASIC_MVDD_INFO

/* ========================================================================================== */
/**************************************************************************/

typedef struct _ATOM_ASIC_SS_ASSIGNMENT {
	ULONG ulTargetClockRange;	/* Clock Out frequence (VCO ), in unit of 10Khz */
	USHORT usSpreadSpectrumPercentage;	/* in unit of 0.01% */
	USHORT usSpreadRateInKhz;	/* in unit of kHz, modulation freq */
	UCHAR ucClockIndication;	/* Indicate which clock source needs SS */
	UCHAR ucSpreadSpectrumMode;	/* Bit1=0 Down Spread,=1 Center Spread. */
	UCHAR ucReserved[2];
} ATOM_ASIC_SS_ASSIGNMENT;

/* Define ucSpreadSpectrumType */
#define ASIC_INTERNAL_MEMORY_SS			1
#define ASIC_INTERNAL_ENGINE_SS			2
#define ASIC_INTERNAL_UVD_SS				3

typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4];
} ATOM_ASIC_INTERNAL_SS_INFO;

/* ==============================Scratch Pad Definition Portion=============================== */
#define ATOM_DEVICE_CONNECT_INFO_DEF  0
#define ATOM_ROM_LOCATION_DEF         1
#define ATOM_TV_STANDARD_DEF          2
#define ATOM_ACTIVE_INFO_DEF          3
#define ATOM_LCD_INFO_DEF             4
#define ATOM_DOS_REQ_INFO_DEF         5
#define ATOM_ACC_CHANGE_INFO_DEF      6
#define ATOM_DOS_MODE_INFO_DEF        7
#define ATOM_I2C_CHANNEL_STATUS_DEF   8
#define ATOM_I2C_CHANNEL_STATUS1_DEF  9

/*  BIOS_0_SCRATCH Definition */
#define ATOM_S0_CRT1_MONO               0x00000001L
#define ATOM_S0_CRT1_COLOR              0x00000002L
#define ATOM_S0_CRT1_MASK               (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)

#define ATOM_S0_TV1_COMPOSITE_A         0x00000004L
#define ATOM_S0_TV1_SVIDEO_A            0x00000008L
#define ATOM_S0_TV1_MASK_A              (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)

#define ATOM_S0_CV_A                    0x00000010L
#define ATOM_S0_CV_DIN_A                0x00000020L
#define ATOM_S0_CV_MASK_A               (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)

#define ATOM_S0_CRT2_MONO               0x00000100L
#define ATOM_S0_CRT2_COLOR              0x00000200L
#define ATOM_S0_CRT2_MASK               (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)

#define ATOM_S0_TV1_COMPOSITE           0x00000400L
#define ATOM_S0_TV1_SVIDEO              0x00000800L
#define ATOM_S0_TV1_SCART               0x00004000L
#define ATOM_S0_TV1_MASK                (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)

#define ATOM_S0_CV                      0x00001000L
#define ATOM_S0_CV_DIN                  0x00002000L
#define ATOM_S0_CV_MASK                 (ATOM_S0_CV+ATOM_S0_CV_DIN)

#define ATOM_S0_DFP1                    0x00010000L
#define ATOM_S0_DFP2                    0x00020000L
#define ATOM_S0_LCD1                    0x00040000L
#define ATOM_S0_LCD2                    0x00080000L
#define ATOM_S0_TV2                     0x00100000L
#define ATOM_S0_DFP3			0x00200000L
#define ATOM_S0_DFP4			0x00400000L
#define ATOM_S0_DFP5			0x00800000L

#define ATOM_S0_DFP_MASK \
	(ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5)

#define ATOM_S0_FAD_REGISTER_BUG        0x02000000L	/*  If set, indicates we are running a PCIE asic with */
						    /*  the FAD/HDP reg access bug.  Bit is read by DAL */

#define ATOM_S0_THERMAL_STATE_MASK      0x1C000000L
#define ATOM_S0_THERMAL_STATE_SHIFT     26

#define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
#define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29

#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC     1
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC     2
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3

/* Byte aligned defintion for BIOS usage */
#define ATOM_S0_CRT1_MONOb0             0x01
#define ATOM_S0_CRT1_COLORb0            0x02
#define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)

#define ATOM_S0_TV1_COMPOSITEb0         0x04
#define ATOM_S0_TV1_SVIDEOb0            0x08
#define ATOM_S0_TV1_MASKb0              (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)

#define ATOM_S0_CVb0                    0x10
#define ATOM_S0_CV_DINb0                0x20
#define ATOM_S0_CV_MASKb0               (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)

#define ATOM_S0_CRT2_MONOb1             0x01
#define ATOM_S0_CRT2_COLORb1            0x02
#define ATOM_S0_CRT2_MASKb1             (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)

#define ATOM_S0_TV1_COMPOSITEb1         0x04
#define ATOM_S0_TV1_SVIDEOb1            0x08
#define ATOM_S0_TV1_SCARTb1             0x40
#define ATOM_S0_TV1_MASKb1              (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)

#define ATOM_S0_CVb1                    0x10
#define ATOM_S0_CV_DINb1                0x20
#define ATOM_S0_CV_MASKb1               (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)

#define ATOM_S0_DFP1b2                  0x01
#define ATOM_S0_DFP2b2                  0x02
#define ATOM_S0_LCD1b2                  0x04
#define ATOM_S0_LCD2b2                  0x08
#define ATOM_S0_TV2b2                   0x10
#define ATOM_S0_DFP3b2									0x20

#define ATOM_S0_THERMAL_STATE_MASKb3    0x1C
#define ATOM_S0_THERMAL_STATE_SHIFTb3   2

#define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
#define ATOM_S0_LCD1_SHIFT              18

/*  BIOS_1_SCRATCH Definition */
#define ATOM_S1_ROM_LOCATION_MASK       0x0000FFFFL
#define ATOM_S1_PCI_BUS_DEV_MASK        0xFFFF0000L

/*       BIOS_2_SCRATCH Definition */
#define ATOM_S2_TV1_STANDARD_MASK       0x0000000FL
#define ATOM_S2_CURRENT_BL_LEVEL_MASK   0x0000FF00L
#define ATOM_S2_CURRENT_BL_LEVEL_SHIFT  8

#define ATOM_S2_CRT1_DPMS_STATE         0x00010000L
#define ATOM_S2_LCD1_DPMS_STATE	        0x00020000L
#define ATOM_S2_TV1_DPMS_STATE          0x00040000L
#define ATOM_S2_DFP1_DPMS_STATE         0x00080000L
#define ATOM_S2_CRT2_DPMS_STATE         0x00100000L
#define ATOM_S2_LCD2_DPMS_STATE         0x00200000L
#define ATOM_S2_TV2_DPMS_STATE          0x00400000L
#define ATOM_S2_DFP2_DPMS_STATE         0x00800000L
#define ATOM_S2_CV_DPMS_STATE           0x01000000L
#define ATOM_S2_DFP3_DPMS_STATE					0x02000000L
#define ATOM_S2_DFP4_DPMS_STATE					0x04000000L
#define ATOM_S2_DFP5_DPMS_STATE					0x08000000L

#define ATOM_S2_DFP_DPM_STATE \
	(ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | \
	 ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | \
	 ATOM_S2_DFP5_DPMS_STATE)

#define ATOM_S2_DEVICE_DPMS_STATE \
	(ATOM_S2_CRT1_DPMS_STATE + ATOM_S2_LCD1_DPMS_STATE + \
	 ATOM_S2_TV1_DPMS_STATE + ATOM_S2_DFP_DPMS_STATE + \
	 ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \
	 ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE)

#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK       0x0C000000L
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE     0x10000000L

#define ATOM_S2_VRI_BRIGHT_ENABLE       0x20000000L

#define ATOM_S2_DISPLAY_ROTATION_0_DEGREE     0x0
#define ATOM_S2_DISPLAY_ROTATION_90_DEGREE    0x1
#define ATOM_S2_DISPLAY_ROTATION_180_DEGREE   0x2
#define ATOM_S2_DISPLAY_ROTATION_270_DEGREE   0x3
#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L

/* Byte aligned defintion for BIOS usage */
#define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
#define ATOM_S2_CRT1_DPMS_STATEb2       0x01
#define ATOM_S2_LCD1_DPMS_STATEb2       0x02
#define ATOM_S2_TV1_DPMS_STATEb2        0x04
#define ATOM_S2_DFP1_DPMS_STATEb2       0x08
#define ATOM_S2_CRT2_DPMS_STATEb2       0x10
#define ATOM_S2_LCD2_DPMS_STATEb2       0x20
#define ATOM_S2_TV2_DPMS_STATEb2        0x40
#define ATOM_S2_DFP2_DPMS_STATEb2       0x80
#define ATOM_S2_CV_DPMS_STATEb3         0x01
#define ATOM_S2_DFP3_DPMS_STATEb3				0x02
#define ATOM_S2_DFP4_DPMS_STATEb3				0x04
#define ATOM_S2_DFP5_DPMS_STATEb3				0x08

#define ATOM_S2_DEVICE_DPMS_MASKw1      0x3FF
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3     0x0C
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3   0x10
#define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
#define ATOM_S2_ROTATION_STATE_MASKb3   0xC0

/*  BIOS_3_SCRATCH Definition */
#define ATOM_S3_CRT1_ACTIVE             0x00000001L
#define ATOM_S3_LCD1_ACTIVE             0x00000002L
#define ATOM_S3_TV1_ACTIVE              0x00000004L
#define ATOM_S3_DFP1_ACTIVE             0x00000008L
#define ATOM_S3_CRT2_ACTIVE             0x00000010L
#define ATOM_S3_LCD2_ACTIVE             0x00000020L
#define ATOM_S3_TV2_ACTIVE              0x00000040L
#define ATOM_S3_DFP2_ACTIVE             0x00000080L
#define ATOM_S3_CV_ACTIVE               0x00000100L
#define ATOM_S3_DFP3_ACTIVE							0x00000200L
#define ATOM_S3_DFP4_ACTIVE							0x00000400L
#define ATOM_S3_DFP5_ACTIVE							0x00000800L

#define ATOM_S3_DEVICE_ACTIVE_MASK      0x000003FFL

#define ATOM_S3_LCD_FULLEXPANSION_ACTIVE         0x00001000L
#define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L

#define ATOM_S3_CRT1_CRTC_ACTIVE        0x00010000L
#define ATOM_S3_LCD1_CRTC_ACTIVE        0x00020000L
#define ATOM_S3_TV1_CRTC_ACTIVE         0x00040000L
#define ATOM_S3_DFP1_CRTC_ACTIVE        0x00080000L
#define ATOM_S3_CRT2_CRTC_ACTIVE        0x00100000L
#define ATOM_S3_LCD2_CRTC_ACTIVE        0x00200000L
#define ATOM_S3_TV2_CRTC_ACTIVE         0x00400000L
#define ATOM_S3_DFP2_CRTC_ACTIVE        0x00800000L
#define ATOM_S3_CV_CRTC_ACTIVE          0x01000000L
#define ATOM_S3_DFP3_CRTC_ACTIVE				0x02000000L
#define ATOM_S3_DFP4_CRTC_ACTIVE				0x04000000L
#define ATOM_S3_DFP5_CRTC_ACTIVE				0x08000000L

#define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
#define ATOM_S3_ASIC_GUI_ENGINE_HUNG    0x20000000L
#define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
#define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L

/* Byte aligned defintion for BIOS usage */
#define ATOM_S3_CRT1_ACTIVEb0           0x01
#define ATOM_S3_LCD1_ACTIVEb0           0x02
#define ATOM_S3_TV1_ACTIVEb0            0x04
#define ATOM_S3_DFP1_ACTIVEb0           0x08
#define ATOM_S3_CRT2_ACTIVEb0           0x10
#define ATOM_S3_LCD2_ACTIVEb0           0x20
#define ATOM_S3_TV2_ACTIVEb0            0x40
#define ATOM_S3_DFP2_ACTIVEb0           0x80
#define ATOM_S3_CV_ACTIVEb1             0x01
#define ATOM_S3_DFP3_ACTIVEb1						0x02
#define ATOM_S3_DFP4_ACTIVEb1						0x04
#define ATOM_S3_DFP5_ACTIVEb1						0x08

#define ATOM_S3_ACTIVE_CRTC1w0          0xFFF

#define ATOM_S3_CRT1_CRTC_ACTIVEb2      0x01
#define ATOM_S3_LCD1_CRTC_ACTIVEb2      0x02
#define ATOM_S3_TV1_CRTC_ACTIVEb2       0x04
#define ATOM_S3_DFP1_CRTC_ACTIVEb2      0x08
#define ATOM_S3_CRT2_CRTC_ACTIVEb2      0x10
#define ATOM_S3_LCD2_CRTC_ACTIVEb2      0x20
#define ATOM_S3_TV2_CRTC_ACTIVEb2       0x40
#define ATOM_S3_DFP2_CRTC_ACTIVEb2      0x80
#define ATOM_S3_CV_CRTC_ACTIVEb3        0x01
#define ATOM_S3_DFP3_CRTC_ACTIVEb3			0x02
#define ATOM_S3_DFP4_CRTC_ACTIVEb3			0x04
#define ATOM_S3_DFP5_CRTC_ACTIVEb3			0x08

#define ATOM_S3_ACTIVE_CRTC2w1          0xFFF

#define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3	0x20
#define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
#define ATOM_S3_RQST_GPU_USE_MIN_PWRb3  0x80

/*  BIOS_4_SCRATCH Definition */
#define ATOM_S4_LCD1_PANEL_ID_MASK      0x000000FFL
#define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
#define ATOM_S4_LCD1_REFRESH_SHIFT      8

/* Byte aligned defintion for BIOS usage */
#define ATOM_S4_LCD1_PANEL_ID_MASKb0	  0x0FF
#define ATOM_S4_LCD1_REFRESH_MASKb1		  ATOM_S4_LCD1_PANEL_ID_MASKb0
#define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0

/*  BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! */
#define ATOM_S5_DOS_REQ_CRT1b0          0x01
#define ATOM_S5_DOS_REQ_LCD1b0          0x02
#define ATOM_S5_DOS_REQ_TV1b0           0x04
#define ATOM_S5_DOS_REQ_DFP1b0          0x08
#define ATOM_S5_DOS_REQ_CRT2b0          0x10
#define ATOM_S5_DOS_REQ_LCD2b0          0x20
#define ATOM_S5_DOS_REQ_TV2b0           0x40
#define ATOM_S5_DOS_REQ_DFP2b0          0x80
#define ATOM_S5_DOS_REQ_CVb1            0x01
#define ATOM_S5_DOS_REQ_DFP3b1					0x02
#define ATOM_S5_DOS_REQ_DFP4b1					0x04
#define ATOM_S5_DOS_REQ_DFP5b1					0x08

#define ATOM_S5_DOS_REQ_DEVICEw0        0x03FF

#define ATOM_S5_DOS_REQ_CRT1            0x0001
#define ATOM_S5_DOS_REQ_LCD1            0x0002
#define ATOM_S5_DOS_REQ_TV1             0x0004
#define ATOM_S5_DOS_REQ_DFP1            0x0008
#define ATOM_S5_DOS_REQ_CRT2            0x0010
#define ATOM_S5_DOS_REQ_LCD2            0x0020
#define ATOM_S5_DOS_REQ_TV2             0x0040
#define ATOM_S5_DOS_REQ_DFP2            0x0080
#define ATOM_S5_DOS_REQ_CV              0x0100
#define ATOM_S5_DOS_REQ_DFP3						0x0200
#define ATOM_S5_DOS_REQ_DFP4						0x0400
#define ATOM_S5_DOS_REQ_DFP5						0x0800

#define ATOM_S5_DOS_FORCE_CRT1b2        ATOM_S5_DOS_REQ_CRT1b0
#define ATOM_S5_DOS_FORCE_TV1b2         ATOM_S5_DOS_REQ_TV1b0
#define ATOM_S5_DOS_FORCE_CRT2b2        ATOM_S5_DOS_REQ_CRT2b0
#define ATOM_S5_DOS_FORCE_CVb3          ATOM_S5_DOS_REQ_CVb1
#define ATOM_S5_DOS_FORCE_DEVICEw1 \
	(ATOM_S5_DOS_FORCE_CRT1b2 + ATOM_S5_DOS_FORCE_TV1b2 + \
	 ATOM_S5_DOS_FORCE_CRT2b2 + (ATOM_S5_DOS_FORCE_CVb3 << 8))

/*  BIOS_6_SCRATCH Definition */
#define ATOM_S6_DEVICE_CHANGE           0x00000001L
#define ATOM_S6_SCALER_CHANGE           0x00000002L
#define ATOM_S6_LID_CHANGE              0x00000004L
#define ATOM_S6_DOCKING_CHANGE          0x00000008L
#define ATOM_S6_ACC_MODE                0x00000010L
#define ATOM_S6_EXT_DESKTOP_MODE        0x00000020L
#define ATOM_S6_LID_STATE               0x00000040L
#define ATOM_S6_DOCK_STATE              0x00000080L
#define ATOM_S6_CRITICAL_STATE          0x00000100L
#define ATOM_S6_HW_I2C_BUSY_STATE       0x00000200L
#define ATOM_S6_THERMAL_STATE_CHANGE    0x00000400L
#define ATOM_S6_INTERRUPT_SET_BY_BIOS   0x00000800L
#define ATOM_S6_REQ_LCD_EXPANSION_FULL         0x00001000L	/* Normal expansion Request bit for LCD */
#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO  0x00002000L	/* Aspect ratio expansion Request bit for LCD */

#define ATOM_S6_DISPLAY_STATE_CHANGE    0x00004000L	/* This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion */
#define ATOM_S6_I2C_STATE_CHANGE        0x00008000L	/* This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion */

#define ATOM_S6_ACC_REQ_CRT1            0x00010000L
#define ATOM_S6_ACC_REQ_LCD1            0x00020000L
#define ATOM_S6_ACC_REQ_TV1             0x00040000L
#define ATOM_S6_ACC_REQ_DFP1            0x00080000L
#define ATOM_S6_ACC_REQ_CRT2            0x00100000L
#define ATOM_S6_ACC_REQ_LCD2            0x00200000L
#define ATOM_S6_ACC_REQ_TV2             0x00400000L
#define ATOM_S6_ACC_REQ_DFP2            0x00800000L
#define ATOM_S6_ACC_REQ_CV              0x01000000L
#define ATOM_S6_ACC_REQ_DFP3						0x02000000L
#define ATOM_S6_ACC_REQ_DFP4						0x04000000L
#define ATOM_S6_ACC_REQ_DFP5						0x08000000L

#define ATOM_S6_ACC_REQ_MASK                0x0FFF0000L
#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE    0x10000000L
#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH    0x20000000L
#define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L

/* Byte aligned defintion for BIOS usage */
#define ATOM_S6_DEVICE_CHANGEb0         0x01
#define ATOM_S6_SCALER_CHANGEb0         0x02
#define ATOM_S6_LID_CHANGEb0            0x04
#define ATOM_S6_DOCKING_CHANGEb0        0x08
#define ATOM_S6_ACC_MODEb0              0x10
#define ATOM_S6_EXT_DESKTOP_MODEb0      0x20
#define ATOM_S6_LID_STATEb0             0x40
#define ATOM_S6_DOCK_STATEb0            0x80
#define ATOM_S6_CRITICAL_STATEb1        0x01
#define ATOM_S6_HW_I2C_BUSY_STATEb1     0x02
#define ATOM_S6_THERMAL_STATE_CHANGEb1  0x04
#define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
#define ATOM_S6_REQ_LCD_EXPANSION_FULLb1        0x10
#define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20

#define ATOM_S6_ACC_REQ_CRT1b2          0x01
#define ATOM_S6_ACC_REQ_LCD1b2          0x02
#define ATOM_S6_ACC_REQ_TV1b2           0x04
#define ATOM_S6_ACC_REQ_DFP1b2          0x08
#define ATOM_S6_ACC_REQ_CRT2b2          0x10
#define ATOM_S6_ACC_REQ_LCD2b2          0x20
#define ATOM_S6_ACC_REQ_TV2b2           0x40
#define ATOM_S6_ACC_REQ_DFP2b2          0x80
#define ATOM_S6_ACC_REQ_CVb3            0x01
#define ATOM_S6_ACC_REQ_DFP3b3					0x02
#define ATOM_S6_ACC_REQ_DFP4b3					0x04
#define ATOM_S6_ACC_REQ_DFP5b3					0x08

#define ATOM_S6_ACC_REQ_DEVICEw1        ATOM_S5_DOS_REQ_DEVICEw0
#define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
#define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3    0x40
#define ATOM_S6_CONFIG_DISPLAY_CHANGEb3    0x80

#define ATOM_S6_DEVICE_CHANGE_SHIFT             0
#define ATOM_S6_SCALER_CHANGE_SHIFT             1
#define ATOM_S6_LID_CHANGE_SHIFT                2
#define ATOM_S6_DOCKING_CHANGE_SHIFT            3
#define ATOM_S6_ACC_MODE_SHIFT                  4
#define ATOM_S6_EXT_DESKTOP_MODE_SHIFT          5
#define ATOM_S6_LID_STATE_SHIFT                 6
#define ATOM_S6_DOCK_STATE_SHIFT                7
#define ATOM_S6_CRITICAL_STATE_SHIFT            8
#define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT         9
#define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT      10
#define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT     11
#define ATOM_S6_REQ_SCALER_SHIFT                12
#define ATOM_S6_REQ_SCALER_ARATIO_SHIFT         13
#define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT      14
#define ATOM_S6_I2C_STATE_CHANGE_SHIFT          15
#define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT  28
#define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT  29
#define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT     30
#define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT     31

/*  BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! */
#define ATOM_S7_DOS_MODE_TYPEb0             0x03
#define ATOM_S7_DOS_MODE_VGAb0              0x00
#define ATOM_S7_DOS_MODE_VESAb0             0x01
#define ATOM_S7_DOS_MODE_EXTb0              0x02
#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0      0x0C
#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0     0xF0
#define ATOM_S7_DOS_8BIT_DAC_ENb1           0x01
#define ATOM_S7_DOS_MODE_NUMBERw1           0x0FFFF

#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT       8

/*  BIOS_8_SCRATCH Definition */
#define ATOM_S8_I2C_CHANNEL_BUSY_MASK       0x00000FFFF
#define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK     0x0FFFF0000

#define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT      0
#define ATOM_S8_I2C_ENGINE_BUSY_SHIFT       16

/*  BIOS_9_SCRATCH Definition */
#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
#define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK  0x0000FFFF
#endif
#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
#define ATOM_S9_I2C_CHANNEL_ABORTED_MASK    0xFFFF0000
#endif
#ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
#define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
#endif
#ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
#define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT   16
#endif

#define ATOM_FLAG_SET                         0x20
#define ATOM_FLAG_CLEAR                       0
#define CLEAR_ATOM_S6_ACC_MODE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
#define SET_ATOM_S6_DEVICE_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_SCALER_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_LID_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)

#define SET_ATOM_S6_LID_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) |\
	 ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
#define CLEAR_ATOM_S6_LID_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)

#define SET_ATOM_S6_DOCK_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8)| \
	 ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_DOCK_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
#define CLEAR_ATOM_S6_DOCK_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)

#define SET_ATOM_S6_THERMAL_STATE_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
#define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)

#define SET_ATOM_S6_CRITICAL_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
#define CLEAR_ATOM_S6_CRITICAL_STATE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)

#define SET_ATOM_S6_REQ_SCALER \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
#define CLEAR_ATOM_S6_REQ_SCALER \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )

#define SET_ATOM_S6_REQ_SCALER_ARATIO \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
#define CLEAR_ATOM_S6_REQ_SCALER_ARATIO \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )

#define SET_ATOM_S6_I2C_STATE_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )

#define SET_ATOM_S6_DISPLAY_STATE_CHANGE \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )

#define SET_ATOM_S6_DEVICE_RECONFIG \
	((ATOM_ACC_CHANGE_INFO_DEF << 8) | \
	 ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
#define CLEAR_ATOM_S0_LCD1 \
	((ATOM_DEVICE_CONNECT_INFO_DEF << 8 ) | \
	 ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
#define SET_ATOM_S7_DOS_8BIT_DAC_EN \
	((ATOM_DOS_MODE_INFO_DEF << 8) | \
	 ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
#define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN \
	((ATOM_DOS_MODE_INFO_DEF << 8) | \
	 ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )

/****************************************************************************/
/* Portion II: Definitinos only used in Driver */
/****************************************************************************/

/*  Macros used by driver */

#define	GetIndexIntoMasterTable(MasterOrData, FieldName) (((char *)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES *)0)->FieldName)-(char *)0)/sizeof(USHORT))

#define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
#define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET)  ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)

#define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
#define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION

/****************************************************************************/
/* Portion III: Definitinos only used in VBIOS */
/****************************************************************************/
#define ATOM_DAC_SRC					0x80
#define ATOM_SRC_DAC1					0
#define ATOM_SRC_DAC2					0x80

#ifdef	UEFI_BUILD
#define	USHORT	UTEMP
#endif

typedef struct _MEMORY_PLLINIT_PARAMETERS {
	ULONG ulTargetMemoryClock;	/* In 10Khz unit */
	UCHAR ucAction;		/* not define yet */
	UCHAR ucFbDiv_Hi;	/* Fbdiv Hi byte */
	UCHAR ucFbDiv;		/* FB value */
	UCHAR ucPostDiv;	/* Post div */
} MEMORY_PLLINIT_PARAMETERS;

#define MEMORY_PLLINIT_PS_ALLOCATION  MEMORY_PLLINIT_PARAMETERS

#define	GPIO_PIN_WRITE													0x01
#define	GPIO_PIN_READ														0x00

typedef struct _GPIO_PIN_CONTROL_PARAMETERS {
	UCHAR ucGPIO_ID;	/* return value, read from GPIO pins */
	UCHAR ucGPIOBitShift;	/* define which bit in uGPIOBitVal need to be update */
	UCHAR ucGPIOBitVal;	/* Set/Reset corresponding bit defined in ucGPIOBitMask */
	UCHAR ucAction;		/* =GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write */
} GPIO_PIN_CONTROL_PARAMETERS;

typedef struct _ENABLE_SCALER_PARAMETERS {
	UCHAR ucScaler;		/*  ATOM_SCALER1, ATOM_SCALER2 */
	UCHAR ucEnable;		/*  ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION */
	UCHAR ucTVStandard;	/*  */
	UCHAR ucPadding[1];
} ENABLE_SCALER_PARAMETERS;
#define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS

/* ucEnable: */
#define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION    0
#define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION  1
#define SCALER_ENABLE_2TAP_ALPHA_MODE               2
#define SCALER_ENABLE_MULTITAP_MODE                 3

typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS {
	ULONG usHWIconHorzVertPosn;	/*  Hardware Icon Vertical position */
	UCHAR ucHWIconVertOffset;	/*  Hardware Icon Vertical offset */
	UCHAR ucHWIconHorzOffset;	/*  Hardware Icon Horizontal offset */
	UCHAR ucSelection;	/*  ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 */
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS;

typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION {
	ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon;
	ENABLE_CRTC_PARAMETERS sReserved;
} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION;

typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS {
	USHORT usHight;		/*  Image Hight */
	USHORT usWidth;		/*  Image Width */
	UCHAR ucSurface;	/*  Surface 1 or 2 */
	UCHAR ucPadding[3];
} ENABLE_GRAPH_SURFACE_PARAMETERS;

typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 {
	USHORT usHight;		/*  Image Hight */
	USHORT usWidth;		/*  Image Width */
	UCHAR ucSurface;	/*  Surface 1 or 2 */
	UCHAR ucEnable;		/*  ATOM_ENABLE or ATOM_DISABLE */
	UCHAR ucPadding[2];
} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2;

typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION {
	ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
	ENABLE_YUV_PS_ALLOCATION sReserved;	/*  Don't set this one */
} ENABLE_GRAPH_SURFACE_PS_ALLOCATION;

typedef struct _MEMORY_CLEAN_UP_PARAMETERS {
	USHORT usMemoryStart;	/* in 8Kb boundry, offset from memory base address */
	USHORT usMemorySize;	/* 8Kb blocks aligned */
} MEMORY_CLEAN_UP_PARAMETERS;
#define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS

typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS {
	USHORT usX_Size;	/* When use as input parameter, usX_Size indicates which CRTC */
	USHORT usY_Size;
} GET_DISPLAY_SURFACE_SIZE_PARAMETERS;

typedef struct _INDIRECT_IO_ACCESS {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR IOAccessSequence[256];
} INDIRECT_IO_ACCESS;

#define INDIRECT_READ              0x00
#define INDIRECT_WRITE             0x80

#define INDIRECT_IO_MM             0
#define INDIRECT_IO_PLL            1
#define INDIRECT_IO_MC             2
#define INDIRECT_IO_PCIE           3
#define INDIRECT_IO_PCIEP          4
#define INDIRECT_IO_NBMISC         5

#define INDIRECT_IO_PLL_READ       INDIRECT_IO_PLL   | INDIRECT_READ
#define INDIRECT_IO_PLL_WRITE      INDIRECT_IO_PLL   | INDIRECT_WRITE
#define INDIRECT_IO_MC_READ        INDIRECT_IO_MC    | INDIRECT_READ
#define INDIRECT_IO_MC_WRITE       INDIRECT_IO_MC    | INDIRECT_WRITE
#define INDIRECT_IO_PCIE_READ      INDIRECT_IO_PCIE  | INDIRECT_READ
#define INDIRECT_IO_PCIE_WRITE     INDIRECT_IO_PCIE  | INDIRECT_WRITE
#define INDIRECT_IO_PCIEP_READ     INDIRECT_IO_PCIEP | INDIRECT_READ
#define INDIRECT_IO_PCIEP_WRITE    INDIRECT_IO_PCIEP | INDIRECT_WRITE
#define INDIRECT_IO_NBMISC_READ    INDIRECT_IO_NBMISC | INDIRECT_READ
#define INDIRECT_IO_NBMISC_WRITE   INDIRECT_IO_NBMISC | INDIRECT_WRITE

typedef struct _ATOM_OEM_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
} ATOM_OEM_INFO;

typedef struct _ATOM_TV_MODE {
	UCHAR ucVMode_Num;	/* Video mode number */
	UCHAR ucTV_Mode_Num;	/* Internal TV mode number */
} ATOM_TV_MODE;

typedef struct _ATOM_BIOS_INT_TVSTD_MODE {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usTV_Mode_LUT_Offset;	/*  Pointer to standard to internal number conversion table */
	USHORT usTV_FIFO_Offset;	/*  Pointer to FIFO entry table */
	USHORT usNTSC_Tbl_Offset;	/*  Pointer to SDTV_Mode_NTSC table */
	USHORT usPAL_Tbl_Offset;	/*  Pointer to SDTV_Mode_PAL table */
	USHORT usCV_Tbl_Offset;	/*  Pointer to SDTV_Mode_PAL table */
} ATOM_BIOS_INT_TVSTD_MODE;

typedef struct _ATOM_TV_MODE_SCALER_PTR {
	USHORT ucFilter0_Offset;	/* Pointer to filter format 0 coefficients */
	USHORT usFilter1_Offset;	/* Pointer to filter format 0 coefficients */
	UCHAR ucTV_Mode_Num;
} ATOM_TV_MODE_SCALER_PTR;

typedef struct _ATOM_STANDARD_VESA_TIMING {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_DTD_FORMAT aModeTimings[16];	/*  16 is not the real array number, just for initial allocation */
} ATOM_STANDARD_VESA_TIMING;

typedef struct _ATOM_STD_FORMAT {
	USHORT usSTD_HDisp;
	USHORT usSTD_VDisp;
	USHORT usSTD_RefreshRate;
	USHORT usReserved;
} ATOM_STD_FORMAT;

typedef struct _ATOM_VESA_TO_EXTENDED_MODE {
	USHORT usVESA_ModeNumber;
	USHORT usExtendedModeNumber;
} ATOM_VESA_TO_EXTENDED_MODE;

typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT {
	ATOM_COMMON_TABLE_HEADER sHeader;
	ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76];
} ATOM_VESA_TO_INTENAL_MODE_LUT;

/*************** ATOM Memory Related Data Structure ***********************/
typedef struct _ATOM_MEMORY_VENDOR_BLOCK {
	UCHAR ucMemoryType;
	UCHAR ucMemoryVendor;
	UCHAR ucAdjMCId;
	UCHAR ucDynClkId;
	ULONG ulDllResetClkRange;
} ATOM_MEMORY_VENDOR_BLOCK;

typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG {
#if ATOM_BIG_ENDIAN
	ULONG ucMemBlkId:8;
	ULONG ulMemClockRange:24;
#else
	ULONG ulMemClockRange:24;
	ULONG ucMemBlkId:8;
#endif
} ATOM_MEMORY_SETTING_ID_CONFIG;

typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS {
	ATOM_MEMORY_SETTING_ID_CONFIG slAccess;
	ULONG ulAccess;
} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS;

typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK {
	ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID;
	ULONG aulMemData[1];
} ATOM_MEMORY_SETTING_DATA_BLOCK;

typedef struct _ATOM_INIT_REG_INDEX_FORMAT {
	USHORT usRegIndex;	/*  MC register index */
	UCHAR ucPreRegDataLength;	/*  offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf */
} ATOM_INIT_REG_INDEX_FORMAT;

typedef struct _ATOM_INIT_REG_BLOCK {
	USHORT usRegIndexTblSize;	/* size of asRegIndexBuf */
	USHORT usRegDataBlkSize;	/* size of ATOM_MEMORY_SETTING_DATA_BLOCK */
	ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1];
	ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1];
} ATOM_INIT_REG_BLOCK;

#define END_OF_REG_INDEX_BLOCK  0x0ffff
#define END_OF_REG_DATA_BLOCK   0x00000000
#define ATOM_INIT_REG_MASK_FLAG 0x80
#define	CLOCK_RANGE_HIGHEST			0x00ffffff

#define VALUE_DWORD             SIZEOF ULONG
#define VALUE_SAME_AS_ABOVE     0
#define VALUE_MASK_DWORD        0x84

#define INDEX_ACCESS_RANGE_BEGIN	    (VALUE_DWORD + 1)
#define INDEX_ACCESS_RANGE_END		    (INDEX_ACCESS_RANGE_BEGIN + 1)
#define VALUE_INDEX_ACCESS_SINGLE	    (INDEX_ACCESS_RANGE_END + 1)

typedef struct _ATOM_MC_INIT_PARAM_TABLE {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usAdjustARB_SEQDataOffset;
	USHORT usMCInitMemTypeTblOffset;
	USHORT usMCInitCommonTblOffset;
	USHORT usMCInitPowerDownTblOffset;
	ULONG ulARB_SEQDataBuf[32];
	ATOM_INIT_REG_BLOCK asMCInitMemType;
	ATOM_INIT_REG_BLOCK asMCInitCommon;
} ATOM_MC_INIT_PARAM_TABLE;

#define _4Mx16              0x2
#define _4Mx32              0x3
#define _8Mx16              0x12
#define _8Mx32              0x13
#define _16Mx16             0x22
#define _16Mx32             0x23
#define _32Mx16             0x32
#define _32Mx32             0x33
#define _64Mx8              0x41
#define _64Mx16             0x42

#define SAMSUNG             0x1
#define INFINEON            0x2
#define ELPIDA              0x3
#define ETRON               0x4
#define NANYA               0x5
#define HYNIX               0x6
#define MOSEL               0x7
#define WINBOND             0x8
#define ESMT                0x9
#define MICRON              0xF

#define QIMONDA             INFINEON
#define PROMOS              MOSEL

/* ///////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// */

#define UCODE_ROM_START_ADDRESS		0x1c000
#define	UCODE_SIGNATURE			0x4375434d	/*  'MCuC' - MC uCode */

/* uCode block header for reference */

typedef struct _MCuCodeHeader {
	ULONG ulSignature;
	UCHAR ucRevision;
	UCHAR ucChecksum;
	UCHAR ucReserved1;
	UCHAR ucReserved2;
	USHORT usParametersLength;
	USHORT usUCodeLength;
	USHORT usReserved1;
	USHORT usReserved2;
} MCuCodeHeader;

/* //////////////////////////////////////////////////////////////////////////////// */

#define ATOM_MAX_NUMBER_OF_VRAM_MODULE	16

#define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK	0xF
typedef struct _ATOM_VRAM_MODULE_V1 {
	ULONG ulReserved;
	USHORT usEMRSValue;
	USHORT usMRSValue;
	USHORT usReserved;
	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; */
	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender */
	UCHAR ucMemoryDeviceCfg;	/*  [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
	UCHAR ucRow;		/*  Number of Row,in power of 2; */
	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
	UCHAR ucBank;		/*  Nunber of Bank; */
	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
	UCHAR ucChannelNum;	/*  Number of channel; */
	UCHAR ucChannelConfig;	/*  [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
	UCHAR ucDefaultMVDDQ_ID;	/*  Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
	UCHAR ucDefaultMVDDC_ID;	/*  Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
	UCHAR ucReserved[2];
} ATOM_VRAM_MODULE_V1;

typedef struct _ATOM_VRAM_MODULE_V2 {
	ULONG ulReserved;
	ULONG ulFlags;		/*  To enable/disable functionalities based on memory type */
	ULONG ulEngineClock;	/*  Override of default engine clock for particular memory type */
	ULONG ulMemoryClock;	/*  Override of default memory clock for particular memory type */
	USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
	USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
	USHORT usEMRSValue;
	USHORT usMRSValue;
	USHORT usReserved;
	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
	UCHAR ucMemoryDeviceCfg;	/*  [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... */
	UCHAR ucRow;		/*  Number of Row,in power of 2; */
	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
	UCHAR ucBank;		/*  Nunber of Bank; */
	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
	UCHAR ucChannelNum;	/*  Number of channel; */
	UCHAR ucChannelConfig;	/*  [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 */
	UCHAR ucDefaultMVDDQ_ID;	/*  Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; */
	UCHAR ucDefaultMVDDC_ID;	/*  Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; */
	UCHAR ucRefreshRateFactor;
	UCHAR ucReserved[3];
} ATOM_VRAM_MODULE_V2;

typedef struct _ATOM_MEMORY_TIMING_FORMAT {
	ULONG ulClkRange;	/*  memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
	union {
		USHORT usMRS;	/*  mode register */
		USHORT usDDR3_MR0;
	};
	union {
		USHORT usEMRS;	/*  extended mode register */
		USHORT usDDR3_MR1;
	};
	UCHAR ucCL;		/*  CAS latency */
	UCHAR ucWL;		/*  WRITE Latency */
	UCHAR uctRAS;		/*  tRAS */
	UCHAR uctRC;		/*  tRC */
	UCHAR uctRFC;		/*  tRFC */
	UCHAR uctRCDR;		/*  tRCDR */
	UCHAR uctRCDW;		/*  tRCDW */
	UCHAR uctRP;		/*  tRP */
	UCHAR uctRRD;		/*  tRRD */
	UCHAR uctWR;		/*  tWR */
	UCHAR uctWTR;		/*  tWTR */
	UCHAR uctPDIX;		/*  tPDIX */
	UCHAR uctFAW;		/*  tFAW */
	UCHAR uctAOND;		/*  tAOND */
	union {
		struct {
			UCHAR ucflag;	/*  flag to control memory timing calculation. bit0= control EMRS2 Infineon */
			UCHAR ucReserved;
		};
		USHORT usDDR3_MR2;
	};
} ATOM_MEMORY_TIMING_FORMAT;

typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 {
	ULONG ulClkRange;	/*  memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing */
	USHORT usMRS;		/*  mode register */
	USHORT usEMRS;		/*  extended mode register */
	UCHAR ucCL;		/*  CAS latency */
	UCHAR ucWL;		/*  WRITE Latency */
	UCHAR uctRAS;		/*  tRAS */
	UCHAR uctRC;		/*  tRC */
	UCHAR uctRFC;		/*  tRFC */
	UCHAR uctRCDR;		/*  tRCDR */
	UCHAR uctRCDW;		/*  tRCDW */
	UCHAR uctRP;		/*  tRP */
	UCHAR uctRRD;		/*  tRRD */
	UCHAR uctWR;		/*  tWR */
	UCHAR uctWTR;		/*  tWTR */
	UCHAR uctPDIX;		/*  tPDIX */
	UCHAR uctFAW;		/*  tFAW */
	UCHAR uctAOND;		/*  tAOND */
	UCHAR ucflag;		/*  flag to control memory timing calculation. bit0= control EMRS2 Infineon */
/* ///////////////////////GDDR parameters/////////////////////////////////// */
	UCHAR uctCCDL;		/*  */
	UCHAR uctCRCRL;		/*  */
	UCHAR uctCRCWL;		/*  */
	UCHAR uctCKE;		/*  */
	UCHAR uctCKRSE;		/*  */
	UCHAR uctCKRSX;		/*  */
	UCHAR uctFAW32;		/*  */
	UCHAR ucReserved1;	/*  */
	UCHAR ucReserved2;	/*  */
	UCHAR ucTerminator;
} ATOM_MEMORY_TIMING_FORMAT_V1;

typedef struct _ATOM_MEMORY_FORMAT {
	ULONG ulDllDisClock;	/*  memory DLL will be disable when target memory clock is below this clock */
	union {
		USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
		USHORT usDDR3_Reserved;	/*  Not used for DDR3 memory */
	};
	union {
		USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
		USHORT usDDR3_MR3;	/*  Used for DDR3 memory */
	};
	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; */
	UCHAR ucMemoryVenderID;	/*  Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed */
	UCHAR ucRow;		/*  Number of Row,in power of 2; */
	UCHAR ucColumn;		/*  Number of Column,in power of 2; */
	UCHAR ucBank;		/*  Nunber of Bank; */
	UCHAR ucRank;		/*  Number of Rank, in power of 2 */
	UCHAR ucBurstSize;	/*  burst size, 0= burst size=4  1= burst size=8 */
	UCHAR ucDllDisBit;	/*  position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) */
	UCHAR ucRefreshRateFactor;	/*  memory refresh rate in unit of ms */
	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
	UCHAR ucPreamble;	/* [7:4] Write Preamble, [3:0] Read Preamble */
	UCHAR ucMemAttrib;	/*  Memory Device Addribute, like RDBI/WDBI etc */
	ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
} ATOM_MEMORY_FORMAT;

typedef struct _ATOM_VRAM_MODULE_V3 {
	ULONG ulChannelMapCfg;	/*  board dependent paramenter:Channel combination */
	USHORT usSize;		/*  size of ATOM_VRAM_MODULE_V3 */
	USHORT usDefaultMVDDQ;	/*  board dependent parameter:Default Memory Core Voltage */
	USHORT usDefaultMVDDC;	/*  board dependent parameter:Default Memory IO Voltage */
	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
	UCHAR ucChannelNum;	/*  board dependent parameter:Number of channel; */
	UCHAR ucChannelSize;	/*  board dependent parameter:32bit or 64bit */
	UCHAR ucVREFI;		/*  board dependnt parameter: EXT or INT +160mv to -140mv */
	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
	ATOM_MEMORY_FORMAT asMemory;	/*  describ all of video memory parameters from memory spec */
} ATOM_VRAM_MODULE_V3;

/* ATOM_VRAM_MODULE_V3.ucNPL_RT */
#define NPL_RT_MASK															0x0f
#define BATTERY_ODT_MASK												0xc0

#define ATOM_VRAM_MODULE		 ATOM_VRAM_MODULE_V3

typedef struct _ATOM_VRAM_MODULE_V4 {
	ULONG ulChannelMapCfg;	/*  board dependent parameter: Channel combination */
	USHORT usModuleSize;	/*  size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
	USHORT usPrivateReserved;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
	/*  MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
	USHORT usReserved;
	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
	UCHAR ucChannelNum;	/*  Number of channels present in this module config */
	UCHAR ucChannelWidth;	/*  0 - 32 bits; 1 - 64 bits */
	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
	UCHAR ucMisc;		/*  bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8 */
	UCHAR ucVREFI;		/*  board dependent parameter */
	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
	UCHAR ucPreamble;	/*  [7:4] Write Preamble, [3:0] Read Preamble */
	UCHAR ucMemorySize;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
	/*  Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
	UCHAR ucReserved[3];

/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
	union {
		USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
		USHORT usDDR3_Reserved;
	};
	union {
		USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
		USHORT usDDR3_MR3;	/*  Used for DDR3 memory */
	};
	UCHAR ucMemoryVenderID;	/*  Predefined, If not predefined, vendor detection table gets executed */
	UCHAR ucRefreshRateFactor;	/*  [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
	UCHAR ucReserved2[2];
	ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
} ATOM_VRAM_MODULE_V4;

#define VRAM_MODULE_V4_MISC_RANK_MASK       0x3
#define VRAM_MODULE_V4_MISC_DUAL_RANK       0x1
#define VRAM_MODULE_V4_MISC_BL_MASK         0x4
#define VRAM_MODULE_V4_MISC_BL8             0x4
#define VRAM_MODULE_V4_MISC_DUAL_CS         0x10

typedef struct _ATOM_VRAM_MODULE_V5 {
	ULONG ulChannelMapCfg;	/*  board dependent parameter: Channel combination */
	USHORT usModuleSize;	/*  size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE */
	USHORT usPrivateReserved;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
	/*  MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) */
	USHORT usReserved;
	UCHAR ucExtMemoryID;	/*  An external indicator (by hardcode, callback or pin) to tell what is the current memory module */
	UCHAR ucMemoryType;	/*  [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; */
	UCHAR ucChannelNum;	/*  Number of channels present in this module config */
	UCHAR ucChannelWidth;	/*  0 - 32 bits; 1 - 64 bits */
	UCHAR ucDensity;	/*  _8Mx32, _16Mx32, _16Mx16, _32Mx16 */
	UCHAR ucFlag;		/*  To enable/disable functionalities based on memory type */
	UCHAR ucMisc;		/*  bit0: 0 - single rank; 1 - dual rank;   bit2: 0 - burstlength 4, 1 - burstlength 8 */
	UCHAR ucVREFI;		/*  board dependent parameter */
	UCHAR ucNPL_RT;		/*  board dependent parameter:NPL round trip delay, used for calculate memory timing parameters */
	UCHAR ucPreamble;	/*  [7:4] Write Preamble, [3:0] Read Preamble */
	UCHAR ucMemorySize;	/*  BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! */
	/*  Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros */
	UCHAR ucReserved[3];

/* compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level */
	USHORT usEMRS2Value;	/*  EMRS2 Value is used for GDDR2 and GDDR4 memory type */
	USHORT usEMRS3Value;	/*  EMRS3 Value is used for GDDR2 and GDDR4 memory type */
	UCHAR ucMemoryVenderID;	/*  Predefined, If not predefined, vendor detection table gets executed */
	UCHAR ucRefreshRateFactor;	/*  [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) */
	UCHAR ucFIFODepth;	/*  FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth */
	UCHAR ucCDR_Bandwidth;	/*  [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth */
	ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];	/* Memory Timing block sort from lower clock to higher clock */
} ATOM_VRAM_MODULE_V5;

typedef struct _ATOM_VRAM_INFO_V2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucNumOfVRAMModule;
	ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
} ATOM_VRAM_INFO_V2;

typedef struct _ATOM_VRAM_INFO_V3 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usMemAdjustTblOffset;	/*  offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
	USHORT usMemClkPatchTblOffset;	/*      offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
	USHORT usRerseved;
	UCHAR aVID_PinsShift[9];	/*  8 bit strap maximum+terminator */
	UCHAR ucNumOfVRAMModule;
	ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
	ATOM_INIT_REG_BLOCK asMemPatch;	/*  for allocation */
	/*      ATOM_INIT_REG_BLOCK                              aMemAdjust; */
} ATOM_VRAM_INFO_V3;

#define	ATOM_VRAM_INFO_LAST	     ATOM_VRAM_INFO_V3

typedef struct _ATOM_VRAM_INFO_V4 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usMemAdjustTblOffset;	/*  offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting */
	USHORT usMemClkPatchTblOffset;	/*      offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting */
	USHORT usRerseved;
	UCHAR ucMemDQ7_0ByteRemap;	/*  DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 */
	ULONG ulMemDQ7_0BitRemap;	/*  each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] */
	UCHAR ucReservde[4];
	UCHAR ucNumOfVRAMModule;
	ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE];	/*  just for allocation, real number of blocks is in ucNumOfVRAMModule; */
	ATOM_INIT_REG_BLOCK asMemPatch;	/*  for allocation */
	/*      ATOM_INIT_REG_BLOCK                              aMemAdjust; */
} ATOM_VRAM_INFO_V4;

typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR aVID_PinsShift[9];	/* 8 bit strap maximum+terminator */
} ATOM_VRAM_GPIO_DETECTION_INFO;

typedef struct _ATOM_MEMORY_TRAINING_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucTrainingLoop;
	UCHAR ucReserved[3];
	ATOM_INIT_REG_BLOCK asMemTrainingSetting;
} ATOM_MEMORY_TRAINING_INFO;

typedef struct SW_I2C_CNTL_DATA_PARAMETERS {
	UCHAR ucControl;
	UCHAR ucData;
	UCHAR ucSatus;
	UCHAR ucTemp;
} SW_I2C_CNTL_DATA_PARAMETERS;

#define SW_I2C_CNTL_DATA_PS_ALLOCATION  SW_I2C_CNTL_DATA_PARAMETERS

typedef struct _SW_I2C_IO_DATA_PARAMETERS {
	USHORT GPIO_Info;
	UCHAR ucAct;
	UCHAR ucData;
} SW_I2C_IO_DATA_PARAMETERS;

#define SW_I2C_IO_DATA_PS_ALLOCATION  SW_I2C_IO_DATA_PARAMETERS

/****************************SW I2C CNTL DEFINITIONS**********************/
#define SW_I2C_IO_RESET       0
#define SW_I2C_IO_GET         1
#define SW_I2C_IO_DRIVE       2
#define SW_I2C_IO_SET         3
#define SW_I2C_IO_START       4

#define SW_I2C_IO_CLOCK       0
#define SW_I2C_IO_DATA        0x80

#define SW_I2C_IO_ZERO        0
#define SW_I2C_IO_ONE         0x100

#define SW_I2C_CNTL_READ      0
#define SW_I2C_CNTL_WRITE     1
#define SW_I2C_CNTL_START     2
#define SW_I2C_CNTL_STOP      3
#define SW_I2C_CNTL_OPEN      4
#define SW_I2C_CNTL_CLOSE     5
#define SW_I2C_CNTL_WRITE1BIT 6

/* ==============================VESA definition Portion=============================== */
#define VESA_OEM_PRODUCT_REV			            '01.00'
#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT	     0xBB	/* refer to VBE spec p.32, no TTY support */
#define VESA_MODE_WIN_ATTRIBUTE						     7
#define VESA_WIN_SIZE											     64

typedef struct _PTR_32_BIT_STRUCTURE {
	USHORT Offset16;
	USHORT Segment16;
} PTR_32_BIT_STRUCTURE;

typedef union _PTR_32_BIT_UNION {
	PTR_32_BIT_STRUCTURE SegmentOffset;
	ULONG Ptr32_Bit;
} PTR_32_BIT_UNION;

typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE {
	UCHAR VbeSignature[4];
	USHORT VbeVersion;
	PTR_32_BIT_UNION OemStringPtr;
	UCHAR Capabilities[4];
	PTR_32_BIT_UNION VideoModePtr;
	USHORT TotalMemory;
} VBE_1_2_INFO_BLOCK_UPDATABLE;

typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE {
	VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock;
	USHORT OemSoftRev;
	PTR_32_BIT_UNION OemVendorNamePtr;
	PTR_32_BIT_UNION OemProductNamePtr;
	PTR_32_BIT_UNION OemProductRevPtr;
} VBE_2_0_INFO_BLOCK_UPDATABLE;

typedef union _VBE_VERSION_UNION {
	VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock;
	VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock;
} VBE_VERSION_UNION;

typedef struct _VBE_INFO_BLOCK {
	VBE_VERSION_UNION UpdatableVBE_Info;
	UCHAR Reserved[222];
	UCHAR OemData[256];
} VBE_INFO_BLOCK;

typedef struct _VBE_FP_INFO {
	USHORT HSize;
	USHORT VSize;
	USHORT FPType;
	UCHAR RedBPP;
	UCHAR GreenBPP;
	UCHAR BlueBPP;
	UCHAR ReservedBPP;
	ULONG RsvdOffScrnMemSize;
	ULONG RsvdOffScrnMEmPtr;
	UCHAR Reserved[14];
} VBE_FP_INFO;

typedef struct _VESA_MODE_INFO_BLOCK {
/*  Mandatory information for all VBE revisions */
	USHORT ModeAttributes;	/*                  dw      ?       ; mode attributes */
	UCHAR WinAAttributes;	/*                    db      ?       ; window A attributes */
	UCHAR WinBAttributes;	/*                    db      ?       ; window B attributes */
	USHORT WinGranularity;	/*                    dw      ?       ; window granularity */
	USHORT WinSize;		/*                    dw      ?       ; window size */
	USHORT WinASegment;	/*                    dw      ?       ; window A start segment */
	USHORT WinBSegment;	/*                    dw      ?       ; window B start segment */
	ULONG WinFuncPtr;	/*                    dd      ?       ; real mode pointer to window function */
	USHORT BytesPerScanLine;	/*                    dw      ?       ; bytes per scan line */

/* ; Mandatory information for VBE 1.2 and above */
	USHORT XResolution;	/*                         dw      ?       ; horizontal resolution in pixels or characters */
	USHORT YResolution;	/*                   dw      ?       ; vertical resolution in pixels or characters */
	UCHAR XCharSize;	/*                   db      ?       ; character cell width in pixels */
	UCHAR YCharSize;	/*                   db      ?       ; character cell height in pixels */
	UCHAR NumberOfPlanes;	/*                   db      ?       ; number of memory planes */
	UCHAR BitsPerPixel;	/*                   db      ?       ; bits per pixel */
	UCHAR NumberOfBanks;	/*                   db      ?       ; number of banks */
	UCHAR MemoryModel;	/*                   db      ?       ; memory model type */
	UCHAR BankSize;		/*                   db      ?       ; bank size in KB */
	UCHAR NumberOfImagePages;	/*            db    ?       ; number of images */
	UCHAR ReservedForPageFunction;	/* db  1       ; reserved for page function */

/* ; Direct Color fields(required for direct/6 and YUV/7 memory models) */
	UCHAR RedMaskSize;	/*           db      ?       ; size of direct color red mask in bits */
	UCHAR RedFieldPosition;	/*           db      ?       ; bit position of lsb of red mask */
	UCHAR GreenMaskSize;	/*           db      ?       ; size of direct color green mask in bits */
	UCHAR GreenFieldPosition;	/*           db      ?       ; bit position of lsb of green mask */
	UCHAR BlueMaskSize;	/*           db      ?       ; size of direct color blue mask in bits */
	UCHAR BlueFieldPosition;	/*           db      ?       ; bit position of lsb of blue mask */
	UCHAR RsvdMaskSize;	/*           db      ?       ; size of direct color reserved mask in bits */
	UCHAR RsvdFieldPosition;	/*           db      ?       ; bit position of lsb of reserved mask */
	UCHAR DirectColorModeInfo;	/*           db      ?       ; direct color mode attributes */

/* ; Mandatory information for VBE 2.0 and above */
	ULONG PhysBasePtr;	/*           dd      ?       ; physical address for flat memory frame buffer */
	ULONG Reserved_1;	/*           dd      0       ; reserved - always set to 0 */
	USHORT Reserved_2;	/*     dw    0       ; reserved - always set to 0 */

/* ; Mandatory information for VBE 3.0 and above */
	USHORT LinBytesPerScanLine;	/*         dw      ?       ; bytes per scan line for linear modes */
	UCHAR BnkNumberOfImagePages;	/*         db      ?       ; number of images for banked modes */
	UCHAR LinNumberOfImagPages;	/*         db      ?       ; number of images for linear modes */
	UCHAR LinRedMaskSize;	/*         db      ?       ; size of direct color red mask(linear modes) */
	UCHAR LinRedFieldPosition;	/*         db      ?       ; bit position of lsb of red mask(linear modes) */
	UCHAR LinGreenMaskSize;	/*         db      ?       ; size of direct color green mask(linear modes) */
	UCHAR LinGreenFieldPosition;	/*         db      ?       ; bit position of lsb of green mask(linear modes) */
	UCHAR LinBlueMaskSize;	/*         db      ?       ; size of direct color blue mask(linear modes) */
	UCHAR LinBlueFieldPosition;	/*         db      ?       ; bit position of lsb of blue mask(linear modes) */
	UCHAR LinRsvdMaskSize;	/*         db      ?       ; size of direct color reserved mask(linear modes) */
	UCHAR LinRsvdFieldPosition;	/*         db      ?       ; bit position of lsb of reserved mask(linear modes) */
	ULONG MaxPixelClock;	/*         dd      ?       ; maximum pixel clock(in Hz) for graphics mode */
	UCHAR Reserved;		/*         db      190 dup (0) */
} VESA_MODE_INFO_BLOCK;

/*  BIOS function CALLS */
#define ATOM_BIOS_EXTENDED_FUNCTION_CODE        0xA0	/*  ATI Extended Function code */
#define ATOM_BIOS_FUNCTION_COP_MODE             0x00
#define ATOM_BIOS_FUNCTION_SHORT_QUERY1         0x04
#define ATOM_BIOS_FUNCTION_SHORT_QUERY2         0x05
#define ATOM_BIOS_FUNCTION_SHORT_QUERY3         0x06
#define ATOM_BIOS_FUNCTION_GET_DDC              0x0B
#define ATOM_BIOS_FUNCTION_ASIC_DSTATE          0x0E
#define ATOM_BIOS_FUNCTION_DEBUG_PLAY           0x0F
#define ATOM_BIOS_FUNCTION_STV_STD              0x16
#define ATOM_BIOS_FUNCTION_DEVICE_DET           0x17
#define ATOM_BIOS_FUNCTION_DEVICE_SWITCH        0x18

#define ATOM_BIOS_FUNCTION_PANEL_CONTROL        0x82
#define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET       0x83
#define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH    0x84
#define ATOM_BIOS_FUNCTION_HW_ICON              0x8A
#define ATOM_BIOS_FUNCTION_SET_CMOS             0x8B
#define SUB_FUNCTION_UPDATE_DISPLAY_INFO        0x8000	/*  Sub function 80 */
#define SUB_FUNCTION_UPDATE_EXPANSION_INFO      0x8100	/*  Sub function 80 */

#define ATOM_BIOS_FUNCTION_DISPLAY_INFO         0x8D
#define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF        0x8E
#define ATOM_BIOS_FUNCTION_VIDEO_STATE          0x8F
#define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE    0x0300	/*  Sub function 03 */
#define ATOM_SUB_FUNCTION_GET_LIDSTATE          0x0700	/*  Sub function 7 */
#define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE  0x1400	/*  Notify caller the current thermal state */
#define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300	/*  Notify caller the current critical state */
#define ATOM_SUB_FUNCTION_SET_LIDSTATE          0x8500	/*  Sub function 85 */
#define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900	/*  Sub function 89 */
#define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT    0x9400	/*  Notify caller that ADC is supported */

#define ATOM_BIOS_FUNCTION_VESA_DPMS            0x4F10	/*  Set DPMS */
#define ATOM_SUB_FUNCTION_SET_DPMS              0x0001	/*  BL: Sub function 01 */
#define ATOM_SUB_FUNCTION_GET_DPMS              0x0002	/*  BL: Sub function 02 */
#define ATOM_PARAMETER_VESA_DPMS_ON             0x0000	/*  BH Parameter for DPMS ON. */
#define ATOM_PARAMETER_VESA_DPMS_STANDBY        0x0100	/*  BH Parameter for DPMS STANDBY */
#define ATOM_PARAMETER_VESA_DPMS_SUSPEND        0x0200	/*  BH Parameter for DPMS SUSPEND */
#define ATOM_PARAMETER_VESA_DPMS_OFF            0x0400	/*  BH Parameter for DPMS OFF */
#define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON      0x0800	/*  BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) */

#define ATOM_BIOS_RETURN_CODE_MASK              0x0000FF00L
#define ATOM_BIOS_REG_HIGH_MASK                 0x0000FF00L
#define ATOM_BIOS_REG_LOW_MASK                  0x000000FFL

/*  structure used for VBIOS only */

/* DispOutInfoTable */
typedef struct _ASIC_TRANSMITTER_INFO {
	USHORT usTransmitterObjId;
	USHORT usSupportDevice;
	UCHAR ucTransmitterCmdTblId;
	UCHAR ucConfig;
	UCHAR ucEncoderID;	/* available 1st encoder ( default ) */
	UCHAR ucOptionEncoderID;	/* available 2nd encoder ( optional ) */
	UCHAR uc2ndEncoderID;
	UCHAR ucReserved;
} ASIC_TRANSMITTER_INFO;

typedef struct _ASIC_ENCODER_INFO {
	UCHAR ucEncoderID;
	UCHAR ucEncoderConfig;
	USHORT usEncoderCmdTblId;
} ASIC_ENCODER_INFO;

typedef struct _ATOM_DISP_OUT_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT ptrTransmitterInfo;
	USHORT ptrEncoderInfo;
	ASIC_TRANSMITTER_INFO asTransmitterInfo[1];
	ASIC_ENCODER_INFO asEncoderInfo[1];
} ATOM_DISP_OUT_INFO;

/*  DispDevicePriorityInfo */
typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT asDevicePriority[16];
} ATOM_DISPLAY_DEVICE_PRIORITY_INFO;

/* ProcessAuxChannelTransactionTable */
typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS {
	USHORT lpAuxRequest;
	USHORT lpDataOut;
	UCHAR ucChannelID;
	union {
		UCHAR ucReplyStatus;
		UCHAR ucDelay;
	};
	UCHAR ucDataOutLen;
	UCHAR ucReserved;
} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS;

#define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION			PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS

/* GetSinkType */

typedef struct _DP_ENCODER_SERVICE_PARAMETERS {
	USHORT ucLinkClock;
	union {
		UCHAR ucConfig;	/*  for DP training command */
		UCHAR ucI2cId;	/*  use for GET_SINK_TYPE command */
	};
	UCHAR ucAction;
	UCHAR ucStatus;
	UCHAR ucLaneNum;
	UCHAR ucReserved[2];
} DP_ENCODER_SERVICE_PARAMETERS;

/*  ucAction */
#define ATOM_DP_ACTION_GET_SINK_TYPE							0x01
#define ATOM_DP_ACTION_TRAINING_START							0x02
#define ATOM_DP_ACTION_TRAINING_COMPLETE					0x03
#define ATOM_DP_ACTION_TRAINING_PATTERN_SEL				0x04
#define ATOM_DP_ACTION_SET_VSWING_PREEMP					0x05
#define ATOM_DP_ACTION_GET_VSWING_PREEMP					0x06
#define ATOM_DP_ACTION_BLANKING                   0x07

/*  ucConfig */
#define ATOM_DP_CONFIG_ENCODER_SEL_MASK						0x03
#define ATOM_DP_CONFIG_DIG1_ENCODER								0x00
#define ATOM_DP_CONFIG_DIG2_ENCODER								0x01
#define ATOM_DP_CONFIG_EXTERNAL_ENCODER						0x02
#define ATOM_DP_CONFIG_LINK_SEL_MASK							0x04
#define ATOM_DP_CONFIG_LINK_A											0x00
#define ATOM_DP_CONFIG_LINK_B											0x04

#define DP_ENCODER_SERVICE_PS_ALLOCATION				WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS

/*  DP_TRAINING_TABLE */
#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR				ATOM_DP_TRAINING_TBL_ADDR
#define DPCD_SET_SS_CNTL_TBL_ADDR													(ATOM_DP_TRAINING_TBL_ADDR + 8 )
#define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 16)
#define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 24)
#define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 32)
#define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 40)
#define	DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR							(ATOM_DP_TRAINING_TBL_ADDR + 48)
#define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 60)
#define DP_I2C_AUX_DDC_WRITE_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 64)
#define DP_I2C_AUX_DDC_READ_START_TBL_ADDR								(ATOM_DP_TRAINING_TBL_ADDR + 72)
#define DP_I2C_AUX_DDC_READ_TBL_ADDR											(ATOM_DP_TRAINING_TBL_ADDR + 76)
#define DP_I2C_AUX_DDC_READ_END_TBL_ADDR									(ATOM_DP_TRAINING_TBL_ADDR + 80)

typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS {
	UCHAR ucI2CSpeed;
	union {
		UCHAR ucRegIndex;
		UCHAR ucStatus;
	};
	USHORT lpI2CDataOut;
	UCHAR ucFlag;
	UCHAR ucTransBytes;
	UCHAR ucSlaveAddr;
	UCHAR ucLineNumber;
} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS;

#define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION       PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS

/* ucFlag */
#define HW_I2C_WRITE        1
#define HW_I2C_READ         0

/****************************************************************************/
/* Portion VI: Definitinos being oboselete */
/****************************************************************************/

/* ========================================================================================== */
/* Remove the definitions below when driver is ready! */
typedef struct _ATOM_DAC_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usMaxFrequency;	/*  in 10kHz unit */
	USHORT usReserved;
} ATOM_DAC_INFO;

typedef struct _COMPASSIONATE_DATA {
	ATOM_COMMON_TABLE_HEADER sHeader;

	/* ==============================  DAC1 portion */
	UCHAR ucDAC1_BG_Adjustment;
	UCHAR ucDAC1_DAC_Adjustment;
	USHORT usDAC1_FORCE_Data;
	/* ==============================  DAC2 portion */
	UCHAR ucDAC2_CRT2_BG_Adjustment;
	UCHAR ucDAC2_CRT2_DAC_Adjustment;
	USHORT usDAC2_CRT2_FORCE_Data;
	USHORT usDAC2_CRT2_MUX_RegisterIndex;
	UCHAR ucDAC2_CRT2_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
	UCHAR ucDAC2_NTSC_BG_Adjustment;
	UCHAR ucDAC2_NTSC_DAC_Adjustment;
	USHORT usDAC2_TV1_FORCE_Data;
	USHORT usDAC2_TV1_MUX_RegisterIndex;
	UCHAR ucDAC2_TV1_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
	UCHAR ucDAC2_CV_BG_Adjustment;
	UCHAR ucDAC2_CV_DAC_Adjustment;
	USHORT usDAC2_CV_FORCE_Data;
	USHORT usDAC2_CV_MUX_RegisterIndex;
	UCHAR ucDAC2_CV_MUX_RegisterInfo;	/* Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low */
	UCHAR ucDAC2_PAL_BG_Adjustment;
	UCHAR ucDAC2_PAL_DAC_Adjustment;
	USHORT usDAC2_TV2_FORCE_Data;
} COMPASSIONATE_DATA;

/****************************Supported Device Info Table Definitions**********************/
/*   ucConnectInfo: */
/*     [7:4] - connector type */
/*       = 1   - VGA connector */
/*       = 2   - DVI-I */
/*       = 3   - DVI-D */
/*       = 4   - DVI-A */
/*       = 5   - SVIDEO */
/*       = 6   - COMPOSITE */
/*       = 7   - LVDS */
/*       = 8   - DIGITAL LINK */
/*       = 9   - SCART */
/*       = 0xA - HDMI_type A */
/*       = 0xB - HDMI_type B */
/*       = 0xE - Special case1 (DVI+DIN) */
/*       Others=TBD */
/*     [3:0] - DAC Associated */
/*       = 0   - no DAC */
/*       = 1   - DACA */
/*       = 2   - DACB */
/*       = 3   - External DAC */
/*       Others=TBD */
/*  */

typedef struct _ATOM_CONNECTOR_INFO {
#if ATOM_BIG_ENDIAN
	UCHAR bfConnectorType:4;
	UCHAR bfAssociatedDAC:4;
#else
	UCHAR bfAssociatedDAC:4;
	UCHAR bfConnectorType:4;
#endif
} ATOM_CONNECTOR_INFO;

typedef union _ATOM_CONNECTOR_INFO_ACCESS {
	ATOM_CONNECTOR_INFO sbfAccess;
	UCHAR ucAccess;
} ATOM_CONNECTOR_INFO_ACCESS;

typedef struct _ATOM_CONNECTOR_INFO_I2C {
	ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo;
	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;
} ATOM_CONNECTOR_INFO_I2C;

typedef struct _ATOM_SUPPORTED_DEVICES_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usDeviceSupport;
	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO];
} ATOM_SUPPORTED_DEVICES_INFO;

#define NO_INT_SRC_MAPPED       0xFF

typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP {
	UCHAR ucIntSrcBitmap;
} ATOM_CONNECTOR_INC_SRC_BITMAP;

typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usDeviceSupport;
	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
	ATOM_CONNECTOR_INC_SRC_BITMAP
	    asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2];
} ATOM_SUPPORTED_DEVICES_INFO_2;

typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usDeviceSupport;
	ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE];
	ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE];
} ATOM_SUPPORTED_DEVICES_INFO_2d1;

#define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1

typedef struct _ATOM_MISC_CONTROL_INFO {
	USHORT usFrequency;
	UCHAR ucPLL_ChargePump;	/*  PLL charge-pump gain control */
	UCHAR ucPLL_DutyCycle;	/*  PLL duty cycle control */
	UCHAR ucPLL_VCO_Gain;	/*  PLL VCO gain control */
	UCHAR ucPLL_VoltageSwing;	/*  PLL driver voltage swing control */
} ATOM_MISC_CONTROL_INFO;

#define ATOM_MAX_MISC_INFO       4

typedef struct _ATOM_TMDS_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usMaxFrequency;	/*  in 10Khz */
	ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO];
} ATOM_TMDS_INFO;

typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE {
	UCHAR ucTVStandard;	/* Same as TV standards defined above, */
	UCHAR ucPadding[1];
} ATOM_ENCODER_ANALOG_ATTRIBUTE;

typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE {
	UCHAR ucAttribute;	/* Same as other digital encoder attributes defined above */
	UCHAR ucPadding[1];
} ATOM_ENCODER_DIGITAL_ATTRIBUTE;

typedef union _ATOM_ENCODER_ATTRIBUTE {
	ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib;
	ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib;
} ATOM_ENCODER_ATTRIBUTE;

typedef struct _DVO_ENCODER_CONTROL_PARAMETERS {
	USHORT usPixelClock;
	USHORT usEncoderID;
	UCHAR ucDeviceType;	/* Use ATOM_DEVICE_xxx1_Index to indicate device type only. */
	UCHAR ucAction;		/* ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT */
	ATOM_ENCODER_ATTRIBUTE usDevAttr;
} DVO_ENCODER_CONTROL_PARAMETERS;

typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION {
	DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder;
	WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;	/* Caller doesn't need to init this portion */
} DVO_ENCODER_CONTROL_PS_ALLOCATION;

#define ATOM_XTMDS_ASIC_SI164_ID        1
#define ATOM_XTMDS_ASIC_SI178_ID        2
#define ATOM_XTMDS_ASIC_TFP513_ID       3
#define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
#define ATOM_XTMDS_SUPPORTED_DUALLINK   0x00000002
#define ATOM_XTMDS_MVPU_FPGA            0x00000004

typedef struct _ATOM_XTMDS_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	USHORT usSingleLinkMaxFrequency;
	ATOM_I2C_ID_CONFIG_ACCESS sucI2cId;	/* Point the ID on which I2C is used to control external chip */
	UCHAR ucXtransimitterID;
	UCHAR ucSupportedLink;	/*  Bit field, bit0=1, single link supported;bit1=1,dual link supported */
	UCHAR ucSequnceAlterID;	/*  Even with the same external TMDS asic, it's possible that the program seqence alters */
	/*  due to design. This ID is used to alert driver that the sequence is not "standard"! */
	UCHAR ucMasterAddress;	/*  Address to control Master xTMDS Chip */
	UCHAR ucSlaveAddress;	/*  Address to control Slave xTMDS Chip */
} ATOM_XTMDS_INFO;

typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS {
	UCHAR ucEnable;		/*  ATOM_ENABLE=On or ATOM_DISABLE=Off */
	UCHAR ucDevice;		/*  ATOM_DEVICE_DFP1_INDEX.... */
	UCHAR ucPadding[2];
} DFP_DPMS_STATUS_CHANGE_PARAMETERS;

/****************************Legacy Power Play Table Definitions **********************/

/* Definitions for ulPowerPlayMiscInfo */
#define ATOM_PM_MISCINFO_SPLIT_CLOCK                     0x00000000L
#define ATOM_PM_MISCINFO_USING_MCLK_SRC                  0x00000001L
#define ATOM_PM_MISCINFO_USING_SCLK_SRC                  0x00000002L

#define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT            0x00000004L
#define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH        0x00000008L

#define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN             0x00000010L

#define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN          0x00000020L
#define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN          0x00000040L
#define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE                 0x00000080L	/* When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program */

#define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN      0x00000100L
#define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN         0x00000200L
#define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN              0x00000400L
#define ATOM_PM_MISCINFO_LOAD_BALANCE_EN                 0x00000800L
#define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE     0x00001000L
#define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
#define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE            0x00004000L

#define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE             0x00008000L
#define ATOM_PM_MISCINFO_OVER_CLOCK_MODE                 0x00010000L
#define ATOM_PM_MISCINFO_OVER_DRIVE_MODE                 0x00020000L
#define ATOM_PM_MISCINFO_POWER_SAVING_MODE               0x00040000L
#define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE              0x00080000L

#define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK           0x00300000L	/* 0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved */
#define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT          20

#define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE                 0x00400000L
#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2      0x00800000L
#define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4      0x01000000L
#define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN            0x02000000L	/* When set, Dynamic */
#define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN        0x04000000L	/* When set, Dynamic */
#define ATOM_PM_MISCINFO_3D_ACCELERATION_EN              0x08000000L	/* When set, This mode is for acceleated 3D mode */

#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK   0x70000000L	/* 1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) */
#define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT  28
#define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS                0x80000000L

#define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE            0x00000001L
#define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT          0x00000002L
#define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN           0x00000004L
#define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO            0x00000008L
#define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE              0x00000010L
#define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN       0x00000020L
#define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE         0x00000040L	/* If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. */
								      /* If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback */
#define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC                0x00000080L
#define ATOM_PM_MISCINFO2_STUTTER_MODE_EN                0x00000100L
#define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE               0x00000200L

/* ucTableFormatRevision=1 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_POWERMODE_INFO {
	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
	ULONG ulReserved1;	/*  must set to 0 */
	ULONG ulReserved2;	/*  must set to 0 */
	USHORT usEngineClock;
	USHORT usMemoryClock;
	UCHAR ucVoltageDropIndex;	/*  index to GPIO table */
	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
	UCHAR ucMinTemperature;
	UCHAR ucMaxTemperature;
	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
} ATOM_POWERMODE_INFO;

/* ucTableFormatRevision=2 */
/* ucTableContentRevision=1 */
typedef struct _ATOM_POWERMODE_INFO_V2 {
	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
	ULONG ulMiscInfo2;
	ULONG ulEngineClock;
	ULONG ulMemoryClock;
	UCHAR ucVoltageDropIndex;	/*  index to GPIO table */
	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
	UCHAR ucMinTemperature;
	UCHAR ucMaxTemperature;
	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
} ATOM_POWERMODE_INFO_V2;

/* ucTableFormatRevision=2 */
/* ucTableContentRevision=2 */
typedef struct _ATOM_POWERMODE_INFO_V3 {
	ULONG ulMiscInfo;	/* The power level should be arranged in ascending order */
	ULONG ulMiscInfo2;
	ULONG ulEngineClock;
	ULONG ulMemoryClock;
	UCHAR ucVoltageDropIndex;	/*  index to Core (VDDC) votage table */
	UCHAR ucSelectedPanel_RefreshRate;	/*  panel refresh rate */
	UCHAR ucMinTemperature;
	UCHAR ucMaxTemperature;
	UCHAR ucNumPciELanes;	/*  number of PCIE lanes */
	UCHAR ucVDDCI_VoltageDropIndex;	/*  index to VDDCI votage table */
} ATOM_POWERMODE_INFO_V3;

#define ATOM_MAX_NUMBEROF_POWER_BLOCK  8

#define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN            0x01
#define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE         0x02

#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63      0x01
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032   0x02
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030   0x03
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649   0x04
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64      0x05
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375    0x06
#define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512   0x07	/*  Andigilog */

typedef struct _ATOM_POWERPLAY_INFO {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucOverdriveThermalController;
	UCHAR ucOverdriveI2cLine;
	UCHAR ucOverdriveIntBitmap;
	UCHAR ucOverdriveControllerAddress;
	UCHAR ucSizeOfPowerModeEntry;
	UCHAR ucNumOfPowerModeEntries;
	ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
} ATOM_POWERPLAY_INFO;

typedef struct _ATOM_POWERPLAY_INFO_V2 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucOverdriveThermalController;
	UCHAR ucOverdriveI2cLine;
	UCHAR ucOverdriveIntBitmap;
	UCHAR ucOverdriveControllerAddress;
	UCHAR ucSizeOfPowerModeEntry;
	UCHAR ucNumOfPowerModeEntries;
	ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
} ATOM_POWERPLAY_INFO_V2;

typedef struct _ATOM_POWERPLAY_INFO_V3 {
	ATOM_COMMON_TABLE_HEADER sHeader;
	UCHAR ucOverdriveThermalController;
	UCHAR ucOverdriveI2cLine;
	UCHAR ucOverdriveIntBitmap;
	UCHAR ucOverdriveControllerAddress;
	UCHAR ucSizeOfPowerModeEntry;
	UCHAR ucNumOfPowerModeEntries;
	ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK];
} ATOM_POWERPLAY_INFO_V3;

/**************************************************************************/

/*  Following definitions are for compatiblity issue in different SW components. */
#define ATOM_MASTER_DATA_TABLE_REVISION   0x01
#define Object_Info												Object_Header
#define	AdjustARB_SEQ											MC_InitParameter
#define	VRAM_GPIO_DetectionInfo						VoltageObjectInfo
#define	ASIC_VDDCI_Info                   ASIC_ProfilingInfo
#define ASIC_MVDDQ_Info										MemoryTrainingInfo
#define SS_Info                           PPLL_SS_Info
#define ASIC_MVDDC_Info                   ASIC_InternalSS_Info
#define DispDevicePriorityInfo						SaveRestoreInfo
#define DispOutInfo												TV_VideoMode

#define ATOM_ENCODER_OBJECT_TABLE         ATOM_OBJECT_TABLE
#define ATOM_CONNECTOR_OBJECT_TABLE       ATOM_OBJECT_TABLE

/* New device naming, remove them when both DAL/VBIOS is ready */
#define DFP2I_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
#define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS

#define DFP1X_OUTPUT_CONTROL_PARAMETERS    CRT1_OUTPUT_CONTROL_PARAMETERS
#define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS

#define DFP1I_OUTPUT_CONTROL_PARAMETERS    DFP1_OUTPUT_CONTROL_PARAMETERS
#define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION

#define ATOM_DEVICE_DFP1I_SUPPORT          ATOM_DEVICE_DFP1_SUPPORT
#define ATOM_DEVICE_DFP1X_SUPPORT          ATOM_DEVICE_DFP2_SUPPORT

#define ATOM_DEVICE_DFP1I_INDEX            ATOM_DEVICE_DFP1_INDEX
#define ATOM_DEVICE_DFP1X_INDEX            ATOM_DEVICE_DFP2_INDEX

#define ATOM_DEVICE_DFP2I_INDEX            0x00000009
#define ATOM_DEVICE_DFP2I_SUPPORT          (0x1L << ATOM_DEVICE_DFP2I_INDEX)

#define ATOM_S0_DFP1I                      ATOM_S0_DFP1
#define ATOM_S0_DFP1X                      ATOM_S0_DFP2

#define ATOM_S0_DFP2I                      0x00200000L
#define ATOM_S0_DFP2Ib2                    0x20

#define ATOM_S2_DFP1I_DPMS_STATE           ATOM_S2_DFP1_DPMS_STATE
#define ATOM_S2_DFP1X_DPMS_STATE           ATOM_S2_DFP2_DPMS_STATE

#define ATOM_S2_DFP2I_DPMS_STATE           0x02000000L
#define ATOM_S2_DFP2I_DPMS_STATEb3         0x02

#define ATOM_S3_DFP2I_ACTIVEb1             0x02

#define ATOM_S3_DFP1I_ACTIVE               ATOM_S3_DFP1_ACTIVE
#define ATOM_S3_DFP1X_ACTIVE               ATOM_S3_DFP2_ACTIVE

#define ATOM_S3_DFP2I_ACTIVE               0x00000200L

#define ATOM_S3_DFP1I_CRTC_ACTIVE          ATOM_S3_DFP1_CRTC_ACTIVE
#define ATOM_S3_DFP1X_CRTC_ACTIVE          ATOM_S3_DFP2_CRTC_ACTIVE
#define ATOM_S3_DFP2I_CRTC_ACTIVE          0x02000000L

#define ATOM_S3_DFP2I_CRTC_ACTIVEb3        0x02
#define ATOM_S5_DOS_REQ_DFP2Ib1            0x02

#define ATOM_S5_DOS_REQ_DFP2I              0x0200
#define ATOM_S6_ACC_REQ_DFP1I              ATOM_S6_ACC_REQ_DFP1
#define ATOM_S6_ACC_REQ_DFP1X              ATOM_S6_ACC_REQ_DFP2

#define ATOM_S6_ACC_REQ_DFP2Ib3            0x02
#define ATOM_S6_ACC_REQ_DFP2I              0x02000000L

#define TMDS1XEncoderControl               DVOEncoderControl
#define DFP1XOutputControl                 DVOOutputControl

#define ExternalDFPOutputControl           DFP1XOutputControl
#define EnableExternalTMDS_Encoder         TMDS1XEncoderControl

#define DFP1IOutputControl                 TMDSAOutputControl
#define DFP2IOutputControl                 LVTMAOutputControl

#define DAC1_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
#define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION

#define DAC2_ENCODER_CONTROL_PARAMETERS    DAC_ENCODER_CONTROL_PARAMETERS
#define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION

#define ucDac1Standard  ucDacStandard
#define ucDac2Standard  ucDacStandard

#define TMDS1EncoderControl TMDSAEncoderControl
#define TMDS2EncoderControl LVTMAEncoderControl

#define DFP1OutputControl   TMDSAOutputControl
#define DFP2OutputControl   LVTMAOutputControl
#define CRT1OutputControl   DAC1OutputControl
#define CRT2OutputControl   DAC2OutputControl

/* These two lines will be removed for sure in a few days, will follow up with Michael V. */
#define EnableLVDS_SS   EnableSpreadSpectrumOnPPLL
#define ENABLE_LVDS_SS_PARAMETERS_V3  ENABLE_SPREAD_SPECTRUM_ON_PPLL

/*********************************************************************************/

#pragma pack()			/*  BIOS data must use byte aligment */

#endif /* _ATOMBIOS_H */