Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
查找文件 普通视图历史永久链接Permalink
nphy.h 60.9 KB
Newer Older
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
1 2 3 
#ifndef B43_NPHY_H_
#define B43_NPHY_H_
M
b43: Implement dynamic PHY API  
Michael Buesch 已提交
4 
#include "phy_common.h"
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
5 6 7 8 9 10 11 12 13 14 


/* N-PHY registers. */

#define B43_NPHY_BBCFG				B43_PHY_N(0x001) /* BB config */
#define  B43_NPHY_BBCFG_RSTCCA			0x4000 /* Reset CCA */
#define  B43_NPHY_BBCFG_RSTRX			0x8000 /* Reset RX */
#define B43_NPHY_CHANNEL			B43_PHY_N(0x005) /* Channel */
#define B43_NPHY_TXERR				B43_PHY_N(0x007) /* TX error */
#define B43_NPHY_BANDCTL			B43_PHY_N(0x009) /* Band control */
M
b43: Add NPHY channel switch code  
Michael Buesch 已提交
15 
#define  B43_NPHY_BANDCTL_5GHZ			0x0001 /* Use the 5GHz band */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
16 17 18 19 20 21 22 23 24 25 26 27 
#define B43_NPHY_4WI_ADDR			B43_PHY_N(0x00B) /* Four-wire bus address */
#define B43_NPHY_4WI_DATAHI			B43_PHY_N(0x00C) /* Four-wire bus data high */
#define B43_NPHY_4WI_DATALO			B43_PHY_N(0x00D) /* Four-wire bus data low */
#define B43_NPHY_BIST_STAT0			B43_PHY_N(0x00E) /* Built-in self test status 0 */
#define B43_NPHY_BIST_STAT1			B43_PHY_N(0x00F) /* Built-in self test status 1 */

#define B43_NPHY_C1_DESPWR			B43_PHY_N(0x018) /* Core 1 desired power */
#define B43_NPHY_C1_CCK_DESPWR			B43_PHY_N(0x019) /* Core 1 CCK desired power */
#define B43_NPHY_C1_BCLIPBKOFF			B43_PHY_N(0x01A) /* Core 1 barely clip backoff */
#define B43_NPHY_C1_CCK_BCLIPBKOFF		B43_PHY_N(0x01B) /* Core 1 CCK barely clip backoff */
#define B43_NPHY_C1_CGAINI			B43_PHY_N(0x01C) /* Core 1 compute gain info */
#define  B43_NPHY_C1_CGAINI_GAINBKOFF		0x001F /* Gain backoff */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
28 
#define  B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT	0
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
29 
#define  B43_NPHY_C1_CGAINI_CLIPGBKOFF		0x03E0 /* Clip gain backoff */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
30 
#define  B43_NPHY_C1_CGAINI_CLIPGBKOFF_SHIFT	5
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
31 
#define  B43_NPHY_C1_CGAINI_GAINSTEP		0x1C00 /* Gain step */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
32 
#define  B43_NPHY_C1_CGAINI_GAINSTEP_SHIFT	10
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 
#define  B43_NPHY_C1_CGAINI_CL2DETECT		0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C1_CCK_CGAINI			B43_PHY_N(0x01D) /* Core 1 CCK compute gain info */
#define  B43_NPHY_C1_CCK_CGAINI_GAINBKOFF	0x001F /* Gain backoff */
#define  B43_NPHY_C1_CCK_CGAINI_CLIPGBKOFF	0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C1_MINMAX_GAIN			B43_PHY_N(0x01E) /* Core 1 min/max gain */
#define  B43_NPHY_C1_MINGAIN			0x00FF /* Minimum gain */
#define  B43_NPHY_C1_MINGAIN_SHIFT		0
#define  B43_NPHY_C1_MAXGAIN			0xFF00 /* Maximum gain */
#define  B43_NPHY_C1_MAXGAIN_SHIFT		8
#define B43_NPHY_C1_CCK_MINMAX_GAIN		B43_PHY_N(0x01F) /* Core 1 CCK min/max gain */
#define  B43_NPHY_C1_CCK_MINGAIN		0x00FF /* Minimum gain */
#define  B43_NPHY_C1_CCK_MINGAIN_SHIFT		0
#define  B43_NPHY_C1_CCK_MAXGAIN		0xFF00 /* Maximum gain */
#define  B43_NPHY_C1_CCK_MAXGAIN_SHIFT		8
#define B43_NPHY_C1_INITGAIN			B43_PHY_N(0x020) /* Core 1 initial gain code */
#define  B43_NPHY_C1_INITGAIN_EXTLNA		0x0001 /* External LNA index */
#define  B43_NPHY_C1_INITGAIN_LNA		0x0006 /* LNA index */
#define  B43_NPHY_C1_INITGAIN_LNAIDX_SHIFT	1
#define  B43_NPHY_C1_INITGAIN_HPVGA1		0x0078 /* HPVGA1 index */
#define  B43_NPHY_C1_INITGAIN_HPVGA1_SHIFT	3
#define  B43_NPHY_C1_INITGAIN_HPVGA2		0x0F80 /* HPVGA2 index */
#define  B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT	7
#define  B43_NPHY_C1_INITGAIN_TRRX		0x1000 /* TR RX index */
#define  B43_NPHY_C1_INITGAIN_TRTX		0x2000 /* TR TX index */
#define B43_NPHY_C1_CLIP1_HIGAIN		B43_PHY_N(0x021) /* Core 1 clip1 high gain code */
#define B43_NPHY_C1_CLIP1_MEDGAIN		B43_PHY_N(0x022) /* Core 1 clip1 medium gain code */
#define B43_NPHY_C1_CLIP1_LOGAIN		B43_PHY_N(0x023) /* Core 1 clip1 low gain code */
#define B43_NPHY_C1_CLIP2_GAIN			B43_PHY_N(0x024) /* Core 1 clip2 gain code */
#define B43_NPHY_C1_FILTERGAIN			B43_PHY_N(0x025) /* Core 1 filter gain */
#define B43_NPHY_C1_LPF_QHPF_BW			B43_PHY_N(0x026) /* Core 1 LPF Q HP F bandwidth */
#define B43_NPHY_C1_CLIPWBTHRES			B43_PHY_N(0x027) /* Core 1 clip wideband threshold */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP2		0x003F /* Clip 2 */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT	0
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP1		0x0FC0 /* Clip 1 */
#define  B43_NPHY_C1_CLIPWBTHRES_CLIP1_SHIFT	6
#define B43_NPHY_C1_W1THRES			B43_PHY_N(0x028) /* Core 1 W1 threshold */
#define B43_NPHY_C1_EDTHRES			B43_PHY_N(0x029) /* Core 1 ED threshold */
#define B43_NPHY_C1_SMSIGTHRES			B43_PHY_N(0x02A) /* Core 1 small sig threshold */
#define B43_NPHY_C1_NBCLIPTHRES			B43_PHY_N(0x02B) /* Core 1 NB clip threshold */
#define B43_NPHY_C1_CLIP1THRES			B43_PHY_N(0x02C) /* Core 1 clip1 threshold */
#define B43_NPHY_C1_CLIP2THRES			B43_PHY_N(0x02D) /* Core 1 clip2 threshold */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
75 76 77 78 79 
#define B43_NPHY_C2_DESPWR			B43_PHY_N(0x02E) /* Core 2 desired power */
#define B43_NPHY_C2_CCK_DESPWR			B43_PHY_N(0x02F) /* Core 2 CCK desired power */
#define B43_NPHY_C2_BCLIPBKOFF			B43_PHY_N(0x030) /* Core 2 barely clip backoff */
#define B43_NPHY_C2_CCK_BCLIPBKOFF		B43_PHY_N(0x031) /* Core 2 CCK barely clip backoff */
#define B43_NPHY_C2_CGAINI			B43_PHY_N(0x032) /* Core 2 compute gain info */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
80 
#define  B43_NPHY_C2_CGAINI_GAINBKOFF		0x001F /* Gain backoff */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
81 
#define  B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT	0
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
82 
#define  B43_NPHY_C2_CGAINI_CLIPGBKOFF		0x03E0 /* Clip gain backoff */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
83 
#define  B43_NPHY_C2_CGAINI_CLIPGBKOFF_SHIFT	5
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
84 
#define  B43_NPHY_C2_CGAINI_GAINSTEP		0x1C00 /* Gain step */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
85 
#define  B43_NPHY_C2_CGAINI_GAINSTEP_SHIFT	10
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
86 
#define  B43_NPHY_C2_CGAINI_CL2DETECT		0x2000 /* Clip 2 detect mask */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
87 
#define B43_NPHY_C2_CCK_CGAINI			B43_PHY_N(0x033) /* Core 2 CCK compute gain info */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
88 89 
#define  B43_NPHY_C2_CCK_CGAINI_GAINBKOFF	0x001F /* Gain backoff */
#define  B43_NPHY_C2_CCK_CGAINI_CLIPGBKOFF	0x01E0 /* CCK barely clip gain backoff */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
90 
#define B43_NPHY_C2_MINMAX_GAIN			B43_PHY_N(0x034) /* Core 2 min/max gain */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
91 92 93 94 
#define  B43_NPHY_C2_MINGAIN			0x00FF /* Minimum gain */
#define  B43_NPHY_C2_MINGAIN_SHIFT		0
#define  B43_NPHY_C2_MAXGAIN			0xFF00 /* Maximum gain */
#define  B43_NPHY_C2_MAXGAIN_SHIFT		8
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
95 
#define B43_NPHY_C2_CCK_MINMAX_GAIN		B43_PHY_N(0x035) /* Core 2 CCK min/max gain */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
96 97 98 99 
#define  B43_NPHY_C2_CCK_MINGAIN		0x00FF /* Minimum gain */
#define  B43_NPHY_C2_CCK_MINGAIN_SHIFT		0
#define  B43_NPHY_C2_CCK_MAXGAIN		0xFF00 /* Maximum gain */
#define  B43_NPHY_C2_CCK_MAXGAIN_SHIFT		8
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
100 
#define B43_NPHY_C2_INITGAIN			B43_PHY_N(0x036) /* Core 2 initial gain code */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
101 102 103 104 105 106 107 108 109 
#define  B43_NPHY_C2_INITGAIN_EXTLNA		0x0001 /* External LNA index */
#define  B43_NPHY_C2_INITGAIN_LNA		0x0006 /* LNA index */
#define  B43_NPHY_C2_INITGAIN_LNAIDX_SHIFT	1
#define  B43_NPHY_C2_INITGAIN_HPVGA1		0x0078 /* HPVGA1 index */
#define  B43_NPHY_C2_INITGAIN_HPVGA1_SHIFT	3
#define  B43_NPHY_C2_INITGAIN_HPVGA2		0x0F80 /* HPVGA2 index */
#define  B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT	7
#define  B43_NPHY_C2_INITGAIN_TRRX		0x1000 /* TR RX index */
#define  B43_NPHY_C2_INITGAIN_TRTX		0x2000 /* TR TX index */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
110 111 112 113 114 115 116 
#define B43_NPHY_C2_CLIP1_HIGAIN		B43_PHY_N(0x037) /* Core 2 clip1 high gain code */
#define B43_NPHY_C2_CLIP1_MEDGAIN		B43_PHY_N(0x038) /* Core 2 clip1 medium gain code */
#define B43_NPHY_C2_CLIP1_LOGAIN		B43_PHY_N(0x039) /* Core 2 clip1 low gain code */
#define B43_NPHY_C2_CLIP2_GAIN			B43_PHY_N(0x03A) /* Core 2 clip2 gain code */
#define B43_NPHY_C2_FILTERGAIN			B43_PHY_N(0x03B) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW			B43_PHY_N(0x03C) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES			B43_PHY_N(0x03D) /* Core 2 clip wideband threshold */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
117 118 119 120 
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP2		0x003F /* Clip 2 */
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT	0
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP1		0x0FC0 /* Clip 1 */
#define  B43_NPHY_C2_CLIPWBTHRES_CLIP1_SHIFT	6
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
121 122 123 124 125 126 
#define B43_NPHY_C2_W1THRES			B43_PHY_N(0x03E) /* Core 2 W1 threshold */
#define B43_NPHY_C2_EDTHRES			B43_PHY_N(0x03F) /* Core 2 ED threshold */
#define B43_NPHY_C2_SMSIGTHRES			B43_PHY_N(0x040) /* Core 2 small sig threshold */
#define B43_NPHY_C2_NBCLIPTHRES			B43_PHY_N(0x041) /* Core 2 NB clip threshold */
#define B43_NPHY_C2_CLIP1THRES			B43_PHY_N(0x042) /* Core 2 clip1 threshold */
#define B43_NPHY_C2_CLIP2THRES			B43_PHY_N(0x043) /* Core 2 clip2 threshold */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 

#define B43_NPHY_CRS_THRES1			B43_PHY_N(0x044) /* CRS threshold 1 */
#define B43_NPHY_CRS_THRES2			B43_PHY_N(0x045) /* CRS threshold 2 */
#define B43_NPHY_CRS_THRES3			B43_PHY_N(0x046) /* CRS threshold 3 */
#define B43_NPHY_CRSCTL				B43_PHY_N(0x047) /* CRS control */
#define B43_NPHY_DCFADDR			B43_PHY_N(0x048) /* DC filter address */
#define B43_NPHY_RXF20_NUM0			B43_PHY_N(0x049) /* RX filter 20 numerator 0 */
#define B43_NPHY_RXF20_NUM1			B43_PHY_N(0x04A) /* RX filter 20 numerator 1 */
#define B43_NPHY_RXF20_NUM2			B43_PHY_N(0x04B) /* RX filter 20 numerator 2 */
#define B43_NPHY_RXF20_DENOM0			B43_PHY_N(0x04C) /* RX filter 20 denominator 0 */
#define B43_NPHY_RXF20_DENOM1			B43_PHY_N(0x04D) /* RX filter 20 denominator 1 */
#define B43_NPHY_RXF20_NUM10			B43_PHY_N(0x04E) /* RX filter 20 numerator 10 */
#define B43_NPHY_RXF20_NUM11			B43_PHY_N(0x04F) /* RX filter 20 numerator 11 */
#define B43_NPHY_RXF20_NUM12			B43_PHY_N(0x050) /* RX filter 20 numerator 12 */
#define B43_NPHY_RXF20_DENOM10			B43_PHY_N(0x051) /* RX filter 20 denominator 10 */
#define B43_NPHY_RXF20_DENOM11			B43_PHY_N(0x052) /* RX filter 20 denominator 11 */
#define B43_NPHY_RXF40_NUM0			B43_PHY_N(0x053) /* RX filter 40 numerator 0 */
#define B43_NPHY_RXF40_NUM1			B43_PHY_N(0x054) /* RX filter 40 numerator 1 */
#define B43_NPHY_RXF40_NUM2			B43_PHY_N(0x055) /* RX filter 40 numerator 2 */
#define B43_NPHY_RXF40_DENOM0			B43_PHY_N(0x056) /* RX filter 40 denominator 0 */
#define B43_NPHY_RXF40_DENOM1			B43_PHY_N(0x057) /* RX filter 40 denominator 1 */
#define B43_NPHY_RXF40_NUM10			B43_PHY_N(0x058) /* RX filter 40 numerator 10 */
#define B43_NPHY_RXF40_NUM11			B43_PHY_N(0x059) /* RX filter 40 numerator 11 */
#define B43_NPHY_RXF40_NUM12			B43_PHY_N(0x05A) /* RX filter 40 numerator 12 */
#define B43_NPHY_RXF40_DENOM10			B43_PHY_N(0x05B) /* RX filter 40 denominator 10 */
#define B43_NPHY_RXF40_DENOM11			B43_PHY_N(0x05C) /* RX filter 40 denominator 11 */
#define B43_NPHY_PPROC_RSTLEN			B43_PHY_N(0x060) /* Packet processing reset length */
#define B43_NPHY_INITCARR_DLEN			B43_PHY_N(0x061) /* Initial carrier detection length */
#define B43_NPHY_CLIP1CARR_DLEN			B43_PHY_N(0x062) /* Clip1 carrier detection length */
#define B43_NPHY_CLIP2CARR_DLEN			B43_PHY_N(0x063) /* Clip2 carrier detection length */
#define B43_NPHY_INITGAIN_SLEN			B43_PHY_N(0x064) /* Initial gain settle length */
#define B43_NPHY_CLIP1GAIN_SLEN			B43_PHY_N(0x065) /* Clip1 gain settle length */
#define B43_NPHY_CLIP2GAIN_SLEN			B43_PHY_N(0x066) /* Clip2 gain settle length */
#define B43_NPHY_PACKGAIN_SLEN			B43_PHY_N(0x067) /* Packet gain settle length */
#define B43_NPHY_CARRSRC_TLEN			B43_PHY_N(0x068) /* Carrier search timeout length */
#define B43_NPHY_TISRC_TLEN			B43_PHY_N(0x069) /* Timing search timeout length */
#define B43_NPHY_ENDROP_TLEN			B43_PHY_N(0x06A) /* Energy drop timeout length */
#define B43_NPHY_CLIP1_NBDWELL_LEN		B43_PHY_N(0x06B) /* Clip1 NB dwell length */
#define B43_NPHY_CLIP2_NBDWELL_LEN		B43_PHY_N(0x06C) /* Clip2 NB dwell length */
#define B43_NPHY_W1CLIP1_DWELL_LEN		B43_PHY_N(0x06D) /* W1 clip1 dwell length */
#define B43_NPHY_W1CLIP2_DWELL_LEN		B43_PHY_N(0x06E) /* W1 clip2 dwell length */
#define B43_NPHY_W2CLIP1_DWELL_LEN		B43_PHY_N(0x06F) /* W2 clip1 dwell length */
#define B43_NPHY_PLOAD_CSENSE_EXTLEN		B43_PHY_N(0x070) /* Payload carrier sense extension length */
#define B43_NPHY_EDROP_CSENSE_EXTLEN		B43_PHY_N(0x071) /* Energy drop carrier sense extension length */
#define B43_NPHY_TABLE_ADDR			B43_PHY_N(0x072) /* Table address */
#define B43_NPHY_TABLE_DATALO			B43_PHY_N(0x073) /* Table data low */
#define B43_NPHY_TABLE_DATAHI			B43_PHY_N(0x074) /* Table data high */
#define B43_NPHY_WWISE_LENIDX			B43_PHY_N(0x075) /* WWiSE length index */
#define B43_NPHY_TGNSYNC_LENIDX			B43_PHY_N(0x076) /* TGNsync length index */
#define B43_NPHY_TXMACIF_HOLDOFF		B43_PHY_N(0x077) /* TX MAC IF Hold off */
#define B43_NPHY_RFCTL_CMD			B43_PHY_N(0x078) /* RF control (command) */
#define  B43_NPHY_RFCTL_CMD_START		0x0001 /* Start sequence */
#define  B43_NPHY_RFCTL_CMD_RXTX		0x0002 /* RX/TX */
#define  B43_NPHY_RFCTL_CMD_CORESEL		0x0038 /* Core select */
#define  B43_NPHY_RFCTL_CMD_CORESEL_SHIFT	3
#define  B43_NPHY_RFCTL_CMD_PORFORCE		0x0040 /* POR force */
#define  B43_NPHY_RFCTL_CMD_OEPORFORCE		0x0080 /* OE POR force */
#define  B43_NPHY_RFCTL_CMD_RXEN		0x0100 /* RX enable */
#define  B43_NPHY_RFCTL_CMD_TXEN		0x0200 /* TX enable */
#define  B43_NPHY_RFCTL_CMD_CHIP0PU		0x0400 /* Chip0 PU */
M
b43: Add NPHY radio init code  
Michael Buesch 已提交
187 
#define  B43_NPHY_RFCTL_CMD_EN			0x0800 /* Radio enabled */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 
#define  B43_NPHY_RFCTL_CMD_SEQENCORE		0xF000 /* Seq en core */
#define  B43_NPHY_RFCTL_CMD_SEQENCORE_SHIFT	12
#define B43_NPHY_RFCTL_RSSIO1			B43_PHY_N(0x07A) /* RF control (RSSI others 1) */
#define  B43_NPHY_RFCTL_RSSIO1_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO1_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO1_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO1_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO1_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO1_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO1_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG1			B43_PHY_N(0x07B) /* RF control (RX gain 1) */
#define B43_NPHY_RFCTL_TXG1			B43_PHY_N(0x07C) /* RF control (TX gain 1) */
#define B43_NPHY_RFCTL_RSSIO2			B43_PHY_N(0x07D) /* RF control (RSSI others 2) */
#define  B43_NPHY_RFCTL_RSSIO2_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO2_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO2_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO2_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO2_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO2_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO2_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG2			B43_PHY_N(0x07E) /* RF control (RX gain 2) */
#define B43_NPHY_RFCTL_TXG2			B43_PHY_N(0x07F) /* RF control (TX gain 2) */
#define B43_NPHY_RFCTL_RSSIO3			B43_PHY_N(0x080) /* RF control (RSSI others 3) */
#define  B43_NPHY_RFCTL_RSSIO3_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO3_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO3_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO3_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO3_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO3_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO3_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG3			B43_PHY_N(0x081) /* RF control (RX gain 3) */
#define B43_NPHY_RFCTL_TXG3			B43_PHY_N(0x082) /* RF control (TX gain 3) */
#define B43_NPHY_RFCTL_RSSIO4			B43_PHY_N(0x083) /* RF control (RSSI others 4) */
#define  B43_NPHY_RFCTL_RSSIO4_RXPD		0x0001 /* RX PD */
#define  B43_NPHY_RFCTL_RSSIO4_TXPD		0x0002 /* TX PD */
#define  B43_NPHY_RFCTL_RSSIO4_PAPD		0x0004 /* PA PD */
#define  B43_NPHY_RFCTL_RSSIO4_RSSICTL		0x0030 /* RSSI control */
#define  B43_NPHY_RFCTL_RSSIO4_LPFBW		0x00C0 /* LPF bandwidth */
#define  B43_NPHY_RFCTL_RSSIO4_HPFBWHI		0x0100 /* HPF bandwidth high */
#define  B43_NPHY_RFCTL_RSSIO4_HIQDISCO		0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG4			B43_PHY_N(0x084) /* RF control (RX gain 4) */
#define B43_NPHY_RFCTL_TXG4			B43_PHY_N(0x085) /* RF control (TX gain 4) */
#define B43_NPHY_C1_TXIQ_COMP_OFF		B43_PHY_N(0x087) /* Core 1 TX I/Q comp offset */
#define B43_NPHY_C2_TXIQ_COMP_OFF		B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */
#define B43_NPHY_C1_TXCTL			B43_PHY_N(0x08B) /* Core 1 TX control */
#define B43_NPHY_C2_TXCTL			B43_PHY_N(0x08C) /* Core 2 TX control */
M
b43: Add more N-PHY init code  
Michael Buesch 已提交
234 
#define B43_NPHY_SCRAM_SIGCTL			B43_PHY_N(0x090) /* Scram signal control */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 
#define  B43_NPHY_SCRAM_SIGCTL_INITST		0x007F /* Initial state value */
#define  B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT	0
#define  B43_NPHY_SCRAM_SIGCTL_SCM		0x0080 /* Scram control mode */
#define  B43_NPHY_SCRAM_SIGCTL_SICE		0x0100 /* Scram index control enable */
#define  B43_NPHY_SCRAM_SIGCTL_START		0xFE00 /* Scram start bit */
#define  B43_NPHY_SCRAM_SIGCTL_START_SHIFT	9
#define B43_NPHY_RFCTL_INTC1			B43_PHY_N(0x091) /* RF control (intc 1) */
#define B43_NPHY_RFCTL_INTC2			B43_PHY_N(0x092) /* RF control (intc 2) */
#define B43_NPHY_RFCTL_INTC3			B43_PHY_N(0x093) /* RF control (intc 3) */
#define B43_NPHY_RFCTL_INTC4			B43_PHY_N(0x094) /* RF control (intc 4) */
#define B43_NPHY_NRDTO_WWISE			B43_PHY_N(0x095) /* # datatones WWiSE */
#define B43_NPHY_NRDTO_TGNSYNC			B43_PHY_N(0x096) /* # datatones TGNsync */
#define B43_NPHY_SIGFMOD_WWISE			B43_PHY_N(0x097) /* Signal field mod WWiSE */
#define B43_NPHY_LEG_SIGFMOD_11N		B43_PHY_N(0x098) /* Legacy signal field mod 11n */
#define B43_NPHY_HT_SIGFMOD_11N			B43_PHY_N(0x099) /* HT signal field mod 11n */
#define B43_NPHY_C1_RXIQ_COMPA0			B43_PHY_N(0x09A) /* Core 1 RX I/Q comp A0 */
#define B43_NPHY_C1_RXIQ_COMPB0			B43_PHY_N(0x09B) /* Core 1 RX I/Q comp B0 */
#define B43_NPHY_C2_RXIQ_COMPA1			B43_PHY_N(0x09C) /* Core 2 RX I/Q comp A1 */
#define B43_NPHY_C2_RXIQ_COMPB1			B43_PHY_N(0x09D) /* Core 2 RX I/Q comp B1 */
#define B43_NPHY_RXCTL				B43_PHY_N(0x0A0) /* RX control */
#define  B43_NPHY_RXCTL_BSELU20			0x0010 /* Band select upper 20 */
#define  B43_NPHY_RXCTL_RIFSEN			0x0080 /* RIFS enable */
#define B43_NPHY_RFSEQMODE			B43_PHY_N(0x0A1) /* RF seq mode */
#define  B43_NPHY_RFSEQMODE_CAOVER		0x0001 /* Core active override */
#define  B43_NPHY_RFSEQMODE_TROVER		0x0002 /* Trigger override */
#define B43_NPHY_RFSEQCA			B43_PHY_N(0x0A2) /* RF seq core active */
#define  B43_NPHY_RFSEQCA_TXEN			0x000F /* TX enable */
#define  B43_NPHY_RFSEQCA_TXEN_SHIFT		0
#define  B43_NPHY_RFSEQCA_RXEN			0x00F0 /* RX enable */
#define  B43_NPHY_RFSEQCA_RXEN_SHIFT		4
#define  B43_NPHY_RFSEQCA_TXDIS			0x0F00 /* TX disable */
#define  B43_NPHY_RFSEQCA_TXDIS_SHIFT		8
#define  B43_NPHY_RFSEQCA_RXDIS			0xF000 /* RX disable */
#define  B43_NPHY_RFSEQCA_RXDIS_SHIFT		12
#define B43_NPHY_RFSEQTR			B43_PHY_N(0x0A3) /* RF seq trigger */
#define  B43_NPHY_RFSEQTR_RX2TX			0x0001 /* RX2TX */
#define  B43_NPHY_RFSEQTR_TX2RX			0x0002 /* TX2RX */
#define  B43_NPHY_RFSEQTR_UPGH			0x0004 /* Update gain H */
#define  B43_NPHY_RFSEQTR_UPGL			0x0008 /* Update gain L */
#define  B43_NPHY_RFSEQTR_UPGU			0x0010 /* Update gain U */
#define  B43_NPHY_RFSEQTR_RST2RX		0x0020 /* Reset to RX */
#define B43_NPHY_RFSEQST			B43_PHY_N(0x0A4) /* RF seq status. Values same as trigger. */
#define B43_NPHY_AFECTL_OVER			B43_PHY_N(0x0A5) /* AFE control override */
#define B43_NPHY_AFECTL_C1			B43_PHY_N(0x0A6) /* AFE control core 1 */
#define B43_NPHY_AFECTL_C2			B43_PHY_N(0x0A7) /* AFE control core 2 */
#define B43_NPHY_AFECTL_C3			B43_PHY_N(0x0A8) /* AFE control core 3 */
#define B43_NPHY_AFECTL_C4			B43_PHY_N(0x0A9) /* AFE control core 4 */
#define B43_NPHY_AFECTL_DACGAIN1		B43_PHY_N(0x0AA) /* AFE control DAC gain 1 */
#define B43_NPHY_AFECTL_DACGAIN2		B43_PHY_N(0x0AB) /* AFE control DAC gain 2 */
#define B43_NPHY_AFECTL_DACGAIN3		B43_PHY_N(0x0AC) /* AFE control DAC gain 3 */
#define B43_NPHY_AFECTL_DACGAIN4		B43_PHY_N(0x0AD) /* AFE control DAC gain 4 */
#define B43_NPHY_STR_ADDR1			B43_PHY_N(0x0AE) /* STR address 1 */
#define B43_NPHY_STR_ADDR2			B43_PHY_N(0x0AF) /* STR address 2 */
#define B43_NPHY_CLASSCTL			B43_PHY_N(0x0B0) /* Classifier control */
#define  B43_NPHY_CLASSCTL_CCKEN		0x0001 /* CCK enable */
#define  B43_NPHY_CLASSCTL_OFDMEN		0x0002 /* OFDM enable */
#define  B43_NPHY_CLASSCTL_WAITEDEN		0x0004 /* Waited enable */
#define B43_NPHY_IQFLIP				B43_PHY_N(0x0B1) /* I/Q flip */
#define  B43_NPHY_IQFLIP_ADC1			0x0001 /* ADC1 */
#define  B43_NPHY_IQFLIP_ADC2			0x0010 /* ADC2 */
#define B43_NPHY_SISO_SNR_THRES			B43_PHY_N(0x0B2) /* SISO SNR threshold */
#define B43_NPHY_SIGMA_N_MULT			B43_PHY_N(0x0B3) /* Sigma N multiplier */
#define B43_NPHY_TXMACDELAY			B43_PHY_N(0x0B4) /* TX MAC delay */
#define B43_NPHY_TXFRAMEDELAY			B43_PHY_N(0x0B5) /* TX frame delay */
#define B43_NPHY_MLPARM				B43_PHY_N(0x0B6) /* ML parameters */
#define B43_NPHY_MLCTL				B43_PHY_N(0x0B7) /* ML control */
#define B43_NPHY_WWISE_20NCYCDAT		B43_PHY_N(0x0B8) /* WWiSE 20 N cyc data */
#define B43_NPHY_WWISE_40NCYCDAT		B43_PHY_N(0x0B9) /* WWiSE 40 N cyc data */
#define B43_NPHY_TGNSYNC_20NCYCDAT		B43_PHY_N(0x0BA) /* TGNsync 20 N cyc data */
#define B43_NPHY_TGNSYNC_40NCYCDAT		B43_PHY_N(0x0BB) /* TGNsync 40 N cyc data */
#define B43_NPHY_INITSWIZP			B43_PHY_N(0x0BC) /* Initial swizzle pattern */
#define B43_NPHY_TXTAILCNT			B43_PHY_N(0x0BD) /* TX tail count value */
#define B43_NPHY_BPHY_CTL1			B43_PHY_N(0x0BE) /* B PHY control 1 */
#define B43_NPHY_BPHY_CTL2			B43_PHY_N(0x0BF) /* B PHY control 2 */
#define  B43_NPHY_BPHY_CTL2_LUT			0x001F /* LUT index */
#define  B43_NPHY_BPHY_CTL2_LUT_SHIFT		0
#define  B43_NPHY_BPHY_CTL2_MACDEL		0x7FE0 /* MAC delay */
#define  B43_NPHY_BPHY_CTL2_MACDEL_SHIFT	5
#define B43_NPHY_IQLOCAL_CMD			B43_PHY_N(0x0C0) /* I/Q LO cal command */
#define  B43_NPHY_IQLOCAL_CMD_EN		0x8000
#define B43_NPHY_IQLOCAL_CMDNNUM		B43_PHY_N(0x0C1) /* I/Q LO cal command N num */
#define B43_NPHY_IQLOCAL_CMDGCTL		B43_PHY_N(0x0C2) /* I/Q LO cal command G control */
#define B43_NPHY_SAMP_CMD			B43_PHY_N(0x0C3) /* Sample command */
#define  B43_NPHY_SAMP_CMD_STOP			0x0002 /* Stop */
#define B43_NPHY_SAMP_LOOPCNT			B43_PHY_N(0x0C4) /* Sample loop count */
#define B43_NPHY_SAMP_WAITCNT			B43_PHY_N(0x0C5) /* Sample wait count */
#define B43_NPHY_SAMP_DEPCNT			B43_PHY_N(0x0C6) /* Sample depth count */
#define B43_NPHY_SAMP_STAT			B43_PHY_N(0x0C7) /* Sample status */
#define B43_NPHY_GPIO_LOOEN			B43_PHY_N(0x0C8) /* GPIO low out enable */
#define B43_NPHY_GPIO_HIOEN			B43_PHY_N(0x0C9) /* GPIO high out enable */
#define B43_NPHY_GPIO_SEL			B43_PHY_N(0x0CA) /* GPIO select */
#define B43_NPHY_GPIO_CLKCTL			B43_PHY_N(0x0CB) /* GPIO clock control */
#define B43_NPHY_TXF_20CO_AS0			B43_PHY_N(0x0CC) /* TX filter 20 coeff A stage 0 */
#define B43_NPHY_TXF_20CO_AS1			B43_PHY_N(0x0CD) /* TX filter 20 coeff A stage 1 */
#define B43_NPHY_TXF_20CO_AS2			B43_PHY_N(0x0CE) /* TX filter 20 coeff A stage 2 */
#define B43_NPHY_TXF_20CO_B32S0			B43_PHY_N(0x0CF) /* TX filter 20 coeff B32 stage 0 */
#define B43_NPHY_TXF_20CO_B1S0			B43_PHY_N(0x0D0) /* TX filter 20 coeff B1 stage 0 */
#define B43_NPHY_TXF_20CO_B32S1			B43_PHY_N(0x0D1) /* TX filter 20 coeff B32 stage 1 */
#define B43_NPHY_TXF_20CO_B1S1			B43_PHY_N(0x0D2) /* TX filter 20 coeff B1 stage 1 */
#define B43_NPHY_TXF_20CO_B32S2			B43_PHY_N(0x0D3) /* TX filter 20 coeff B32 stage 2 */
#define B43_NPHY_TXF_20CO_B1S2			B43_PHY_N(0x0D4) /* TX filter 20 coeff B1 stage 2 */
#define B43_NPHY_SIGFLDTOL			B43_PHY_N(0x0D5) /* Signal fld tolerance */
#define B43_NPHY_TXSERFLD			B43_PHY_N(0x0D6) /* TX service field */
#define B43_NPHY_AFESEQ_RX2TX_PUD		B43_PHY_N(0x0D7) /* AFE seq RX2TX power up/down delay */
#define B43_NPHY_AFESEQ_TX2RX_PUD		B43_PHY_N(0x0D8) /* AFE seq TX2RX power up/down delay */
#define B43_NPHY_TGNSYNC_SCRAMI0		B43_PHY_N(0x0D9) /* TGNsync scram init 0 */
#define B43_NPHY_TGNSYNC_SCRAMI1		B43_PHY_N(0x0DA) /* TGNsync scram init 1 */
#define B43_NPHY_INITSWIZPATTLEG		B43_PHY_N(0x0DB) /* Initial swizzle pattern leg */
#define B43_NPHY_BPHY_CTL3			B43_PHY_N(0x0DC) /* B PHY control 3 */
#define  B43_NPHY_BPHY_CTL3_SCALE		0x00FF /* Scale */
#define  B43_NPHY_BPHY_CTL3_SCALE_SHIFT		0
#define  B43_NPHY_BPHY_CTL3_FSC			0xFF00 /* Frame start count value */
#define  B43_NPHY_BPHY_CTL3_FSC_SHIFT		8
#define B43_NPHY_BPHY_CTL4			B43_PHY_N(0x0DD) /* B PHY control 4 */
#define B43_NPHY_C1_TXBBMULT			B43_PHY_N(0x0DE) /* Core 1 TX BB multiplier */
#define B43_NPHY_C2_TXBBMULT			B43_PHY_N(0x0DF) /* Core 2 TX BB multiplier */
#define B43_NPHY_TXF_40CO_AS0			B43_PHY_N(0x0E1) /* TX filter 40 coeff A stage 0 */
#define B43_NPHY_TXF_40CO_AS1			B43_PHY_N(0x0E2) /* TX filter 40 coeff A stage 1 */
#define B43_NPHY_TXF_40CO_AS2			B43_PHY_N(0x0E3) /* TX filter 40 coeff A stage 2 */
#define B43_NPHY_TXF_40CO_B32S0			B43_PHY_N(0x0E4) /* TX filter 40 coeff B32 stage 0 */
#define B43_NPHY_TXF_40CO_B1S0			B43_PHY_N(0x0E5) /* TX filter 40 coeff B1 stage 0 */
#define B43_NPHY_TXF_40CO_B32S1			B43_PHY_N(0x0E6) /* TX filter 40 coeff B32 stage 1 */
#define B43_NPHY_TXF_40CO_B1S1			B43_PHY_N(0x0E7) /* TX filter 40 coeff B1 stage 1 */
#define B43_NPHY_TXF_40CO_B32S2			B43_PHY_N(0x0E8) /* TX filter 40 coeff B32 stage 2 */
#define B43_NPHY_TXF_40CO_B1S2			B43_PHY_N(0x0E9) /* TX filter 40 coeff B1 stage 2 */
#define B43_NPHY_BIST_STAT2			B43_PHY_N(0x0EA) /* BIST status 2 */
#define B43_NPHY_BIST_STAT3			B43_PHY_N(0x0EB) /* BIST status 3 */
#define B43_NPHY_RFCTL_OVER			B43_PHY_N(0x0EC) /* RF control override */
#define B43_NPHY_MIMOCFG			B43_PHY_N(0x0ED) /* MIMO config */
#define  B43_NPHY_MIMOCFG_GFMIX			0x0004 /* Greenfield or mixed mode */
#define  B43_NPHY_MIMOCFG_AUTO			0x0100 /* Greenfield/mixed mode auto */
#define B43_NPHY_RADAR_BLNKCTL			B43_PHY_N(0x0EE) /* Radar blank control */
#define B43_NPHY_A0RADAR_FIFOCTL		B43_PHY_N(0x0EF) /* Antenna 0 radar FIFO control */
#define B43_NPHY_A1RADAR_FIFOCTL		B43_PHY_N(0x0F0) /* Antenna 1 radar FIFO control */
#define B43_NPHY_A0RADAR_FIFODAT		B43_PHY_N(0x0F1) /* Antenna 0 radar FIFO data */
#define B43_NPHY_A1RADAR_FIFODAT		B43_PHY_N(0x0F2) /* Antenna 1 radar FIFO data */
#define B43_NPHY_RADAR_THRES0			B43_PHY_N(0x0F3) /* Radar threshold 0 */
#define B43_NPHY_RADAR_THRES1			B43_PHY_N(0x0F4) /* Radar threshold 1 */
#define B43_NPHY_RADAR_THRES0R			B43_PHY_N(0x0F5) /* Radar threshold 0R */
#define B43_NPHY_RADAR_THRES1R			B43_PHY_N(0x0F6) /* Radar threshold 1R */
#define B43_NPHY_CSEN_20IN40_DLEN		B43_PHY_N(0x0F7) /* Carrier sense 20 in 40 dwell length */
#define B43_NPHY_RFCTL_LUT_TRSW_LO1		B43_PHY_N(0x0F8) /* RF control LUT TRSW lower 1 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP1		B43_PHY_N(0x0F9) /* RF control LUT TRSW upper 1 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO2		B43_PHY_N(0x0FA) /* RF control LUT TRSW lower 2 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP2		B43_PHY_N(0x0FB) /* RF control LUT TRSW upper 2 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO3		B43_PHY_N(0x0FC) /* RF control LUT TRSW lower 3 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP3		B43_PHY_N(0x0FD) /* RF control LUT TRSW upper 3 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO4		B43_PHY_N(0x0FE) /* RF control LUT TRSW lower 4 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP4		B43_PHY_N(0x0FF) /* RF control LUT TRSW upper 4 */
#define B43_NPHY_RFCTL_LUT_LNAPA1		B43_PHY_N(0x100) /* RF control LUT LNA PA 1 */
#define B43_NPHY_RFCTL_LUT_LNAPA2		B43_PHY_N(0x101) /* RF control LUT LNA PA 2 */
#define B43_NPHY_RFCTL_LUT_LNAPA3		B43_PHY_N(0x102) /* RF control LUT LNA PA 3 */
#define B43_NPHY_RFCTL_LUT_LNAPA4		B43_PHY_N(0x103) /* RF control LUT LNA PA 4 */
#define B43_NPHY_TGNSYNC_CRCM0			B43_PHY_N(0x104) /* TGNsync CRC mask 0 */
#define B43_NPHY_TGNSYNC_CRCM1			B43_PHY_N(0x105) /* TGNsync CRC mask 1 */
#define B43_NPHY_TGNSYNC_CRCM2			B43_PHY_N(0x106) /* TGNsync CRC mask 2 */
#define B43_NPHY_TGNSYNC_CRCM3			B43_PHY_N(0x107) /* TGNsync CRC mask 3 */
#define B43_NPHY_TGNSYNC_CRCM4			B43_PHY_N(0x108) /* TGNsync CRC mask 4 */
#define B43_NPHY_CRCPOLY			B43_PHY_N(0x109) /* CRC polynomial */
#define B43_NPHY_SIGCNT				B43_PHY_N(0x10A) /* # sig count */
#define B43_NPHY_SIGSTARTBIT_CTL		B43_PHY_N(0x10B) /* Sig start bit control */
#define B43_NPHY_CRCPOLY_ORDER			B43_PHY_N(0x10C) /* CRC polynomial order */
#define B43_NPHY_RFCTL_CST0			B43_PHY_N(0x10D) /* RF control core swap table 0 */
#define B43_NPHY_RFCTL_CST1			B43_PHY_N(0x10E) /* RF control core swap table 1 */
#define B43_NPHY_RFCTL_CST2O			B43_PHY_N(0x10F) /* RF control core swap table 2 + others */
#define B43_NPHY_BPHY_CTL5			B43_PHY_N(0x111) /* B PHY control 5 */
#define B43_NPHY_RFSEQ_LPFBW			B43_PHY_N(0x112) /* RF seq LPF bandwidth */
#define B43_NPHY_TSSIBIAS1			B43_PHY_N(0x114) /* TSSI bias val 1 */
#define B43_NPHY_TSSIBIAS2			B43_PHY_N(0x115) /* TSSI bias val 2 */
#define  B43_NPHY_TSSIBIAS_BIAS			0x00FF /* Bias */
#define  B43_NPHY_TSSIBIAS_BIAS_SHIFT		0
#define  B43_NPHY_TSSIBIAS_VAL			0xFF00 /* Value */
#define  B43_NPHY_TSSIBIAS_VAL_SHIFT		8
#define B43_NPHY_ESTPWR1			B43_PHY_N(0x118) /* Estimated power 1 */
#define B43_NPHY_ESTPWR2			B43_PHY_N(0x119) /* Estimated power 2 */
#define  B43_NPHY_ESTPWR_PWR			0x00FF /* Estimated power */
#define  B43_NPHY_ESTPWR_PWR_SHIFT		0
#define  B43_NPHY_ESTPWR_VALID			0x0100 /* Estimated power valid */
#define B43_NPHY_TSSI_MAXTXFDT			B43_PHY_N(0x11C) /* TSSI max TX frame delay time */
#define  B43_NPHY_TSSI_MAXTXFDT_VAL		0x00FF /* max TX frame delay time */
#define  B43_NPHY_TSSI_MAXTXFDT_VAL_SHIFT	0
#define B43_NPHY_TSSI_MAXTDT			B43_PHY_N(0x11D) /* TSSI max TSSI delay time */
#define  B43_NPHY_TSSI_MAXTDT_VAL		0x00FF /* max TSSI delay time */
#define  B43_NPHY_TSSI_MAXTDT_VAL_SHIFT		0
#define B43_NPHY_ITSSI1				B43_PHY_N(0x11E) /* TSSI idle 1 */
#define B43_NPHY_ITSSI2				B43_PHY_N(0x11F) /* TSSI idle 2 */
#define  B43_NPHY_ITSSI_VAL			0x00FF /* Idle TSSI */
#define  B43_NPHY_ITSSI_VAL_SHIFT		0
#define B43_NPHY_TSSIMODE			B43_PHY_N(0x122) /* TSSI mode */
#define  B43_NPHY_TSSIMODE_EN			0x0001 /* TSSI enable */
#define  B43_NPHY_TSSIMODE_PDEN			0x0002 /* Power det enable */
#define B43_NPHY_RXMACIFM			B43_PHY_N(0x123) /* RX Macif mode */
#define B43_NPHY_CRSIT_COCNT_LO			B43_PHY_N(0x124) /* CRS idle time CRS-on count (low) */
#define B43_NPHY_CRSIT_COCNT_HI			B43_PHY_N(0x125) /* CRS idle time CRS-on count (high) */
#define B43_NPHY_CRSIT_MTCNT_LO			B43_PHY_N(0x126) /* CRS idle time measure time count (low) */
#define B43_NPHY_CRSIT_MTCNT_HI			B43_PHY_N(0x127) /* CRS idle time measure time count (high) */
#define B43_NPHY_SAMTWC				B43_PHY_N(0x128) /* Sample tail wait count */
#define B43_NPHY_IQEST_CMD			B43_PHY_N(0x129) /* I/Q estimate command */
#define  B43_NPHY_IQEST_CMD_START		0x0001 /* Start */
#define  B43_NPHY_IQEST_CMD_MODE		0x0002 /* Mode */
#define B43_NPHY_IQEST_WT			B43_PHY_N(0x12A) /* I/Q estimate wait time */
#define  B43_NPHY_IQEST_WT_VAL			0x00FF /* Wait time */
#define  B43_NPHY_IQEST_WT_VAL_SHIFT		0
#define B43_NPHY_IQEST_SAMCNT			B43_PHY_N(0x12B) /* I/Q estimate sample count */
#define B43_NPHY_IQEST_IQACC_LO0		B43_PHY_N(0x12C) /* I/Q estimate I/Q acc lo 0 */
#define B43_NPHY_IQEST_IQACC_HI0		B43_PHY_N(0x12D) /* I/Q estimate I/Q acc hi 0 */
#define B43_NPHY_IQEST_IPACC_LO0		B43_PHY_N(0x12E) /* I/Q estimate I power acc lo 0 */
#define B43_NPHY_IQEST_IPACC_HI0		B43_PHY_N(0x12F) /* I/Q estimate I power acc hi 0 */
#define B43_NPHY_IQEST_QPACC_LO0		B43_PHY_N(0x130) /* I/Q estimate Q power acc lo 0 */
#define B43_NPHY_IQEST_QPACC_HI0		B43_PHY_N(0x131) /* I/Q estimate Q power acc hi 0 */
#define B43_NPHY_IQEST_IQACC_LO1		B43_PHY_N(0x134) /* I/Q estimate I/Q acc lo 1 */
#define B43_NPHY_IQEST_IQACC_HI1		B43_PHY_N(0x135) /* I/Q estimate I/Q acc hi 1 */
#define B43_NPHY_IQEST_IPACC_LO1		B43_PHY_N(0x136) /* I/Q estimate I power acc lo 1 */
#define B43_NPHY_IQEST_IPACC_HI1		B43_PHY_N(0x137) /* I/Q estimate I power acc hi 1 */
#define B43_NPHY_IQEST_QPACC_LO1		B43_PHY_N(0x138) /* I/Q estimate Q power acc lo 1 */
#define B43_NPHY_IQEST_QPACC_HI1		B43_PHY_N(0x139) /* I/Q estimate Q power acc hi 1 */
#define B43_NPHY_MIMO_CRSTXEXT			B43_PHY_N(0x13A) /* MIMO PHY CRS TX extension */
#define B43_NPHY_PWRDET1			B43_PHY_N(0x13B) /* Power det 1 */
#define B43_NPHY_PWRDET2			B43_PHY_N(0x13C) /* Power det 2 */
#define B43_NPHY_MAXRSSI_DTIME			B43_PHY_N(0x13F) /* RSSI max RSSI delay time */
#define B43_NPHY_PIL_DW0			B43_PHY_N(0x141) /* Pilot data weight 0 */
#define B43_NPHY_PIL_DW1			B43_PHY_N(0x142) /* Pilot data weight 1 */
#define B43_NPHY_PIL_DW2			B43_PHY_N(0x143) /* Pilot data weight 2 */
#define  B43_NPHY_PIL_DW_BPSK			0x000F /* BPSK */
#define  B43_NPHY_PIL_DW_BPSK_SHIFT		0
#define  B43_NPHY_PIL_DW_QPSK			0x00F0 /* QPSK */
#define  B43_NPHY_PIL_DW_QPSK_SHIFT		4
#define  B43_NPHY_PIL_DW_16QAM			0x0F00 /* 16-QAM */
#define  B43_NPHY_PIL_DW_16QAM_SHIFT		8
#define  B43_NPHY_PIL_DW_64QAM			0xF000 /* 64-QAM */
#define  B43_NPHY_PIL_DW_64QAM_SHIFT		12
#define B43_NPHY_FMDEM_CFG			B43_PHY_N(0x144) /* FM demodulation config */
#define B43_NPHY_PHASETR_A0			B43_PHY_N(0x145) /* Phase track alpha 0 */
#define B43_NPHY_PHASETR_A1			B43_PHY_N(0x146) /* Phase track alpha 1 */
#define B43_NPHY_PHASETR_A2			B43_PHY_N(0x147) /* Phase track alpha 2 */
#define B43_NPHY_PHASETR_B0			B43_PHY_N(0x148) /* Phase track beta 0 */
#define B43_NPHY_PHASETR_B1			B43_PHY_N(0x149) /* Phase track beta 1 */
#define B43_NPHY_PHASETR_B2			B43_PHY_N(0x14A) /* Phase track beta 2 */
#define B43_NPHY_PHASETR_CHG0			B43_PHY_N(0x14B) /* Phase track change 0 */
#define B43_NPHY_PHASETR_CHG1			B43_PHY_N(0x14C) /* Phase track change 1 */
#define B43_NPHY_PHASETW_OFF			B43_PHY_N(0x14D) /* Phase track offset */
#define B43_NPHY_RFCTL_DBG			B43_PHY_N(0x14E) /* RF control debug */
#define B43_NPHY_CCK_SHIFTB_REF			B43_PHY_N(0x150) /* CCK shiftbits reference var */
#define B43_NPHY_OVER_DGAIN0			B43_PHY_N(0x152) /* Override digital gain 0 */
#define B43_NPHY_OVER_DGAIN1			B43_PHY_N(0x153) /* Override digital gain 1 */
#define  B43_NPHY_OVER_DGAIN_FDGV		0x0007 /* Force digital gain value */
#define  B43_NPHY_OVER_DGAIN_FDGV_SHIFT		0
#define  B43_NPHY_OVER_DGAIN_FDGEN		0x0008 /* Force digital gain enable */
#define  B43_NPHY_OVER_DGAIN_CCKDGECV		0xFF00 /* CCK digital gain enable count value */
#define  B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT	8
#define B43_NPHY_BIST_STAT4			B43_PHY_N(0x156) /* BIST status 4 */
#define B43_NPHY_RADAR_MAL			B43_PHY_N(0x157) /* Radar MA length */
#define B43_NPHY_RADAR_SRCCTL			B43_PHY_N(0x158) /* Radar search control */
#define B43_NPHY_VLD_DTSIG			B43_PHY_N(0x159) /* VLD data tones sig */
#define B43_NPHY_VLD_DTDAT			B43_PHY_N(0x15A) /* VLD data tones data */
#define B43_NPHY_C1_BPHY_RXIQCA0		B43_PHY_N(0x15B) /* Core 1 B PHY RX I/Q comp A0 */
#define B43_NPHY_C1_BPHY_RXIQCB0		B43_PHY_N(0x15C) /* Core 1 B PHY RX I/Q comp B0 */
#define B43_NPHY_C2_BPHY_RXIQCA1		B43_PHY_N(0x15D) /* Core 2 B PHY RX I/Q comp A1 */
#define B43_NPHY_C2_BPHY_RXIQCB1		B43_PHY_N(0x15E) /* Core 2 B PHY RX I/Q comp B1 */
#define B43_NPHY_FREQGAIN0			B43_PHY_N(0x160) /* Frequency gain 0 */
#define B43_NPHY_FREQGAIN1			B43_PHY_N(0x161) /* Frequency gain 1 */
#define B43_NPHY_FREQGAIN2			B43_PHY_N(0x162) /* Frequency gain 2 */
#define B43_NPHY_FREQGAIN3			B43_PHY_N(0x163) /* Frequency gain 3 */
#define B43_NPHY_FREQGAIN4			B43_PHY_N(0x164) /* Frequency gain 4 */
#define B43_NPHY_FREQGAIN5			B43_PHY_N(0x165) /* Frequency gain 5 */
#define B43_NPHY_FREQGAIN6			B43_PHY_N(0x166) /* Frequency gain 6 */
#define B43_NPHY_FREQGAIN7			B43_PHY_N(0x167) /* Frequency gain 7 */
#define B43_NPHY_FREQGAIN_BYPASS		B43_PHY_N(0x168) /* Frequency gain bypass */
#define B43_NPHY_TRLOSS				B43_PHY_N(0x169) /* TR loss value */
#define B43_NPHY_C1_ADCCLIP			B43_PHY_N(0x16A) /* Core 1 ADC clip */
#define B43_NPHY_C2_ADCCLIP			B43_PHY_N(0x16B) /* Core 2 ADC clip */
#define B43_NPHY_LTRN_OFFGAIN			B43_PHY_N(0x16F) /* LTRN offset gain */
#define B43_NPHY_LTRN_OFF			B43_PHY_N(0x170) /* LTRN offset */
#define B43_NPHY_NRDATAT_WWISE20SIG		B43_PHY_N(0x171) /* # data tones WWiSE 20 sig */
#define B43_NPHY_NRDATAT_WWISE40SIG		B43_PHY_N(0x172) /* # data tones WWiSE 40 sig */
#define B43_NPHY_NRDATAT_TGNSYNC20SIG		B43_PHY_N(0x173) /* # data tones TGNsync 20 sig */
#define B43_NPHY_NRDATAT_TGNSYNC40SIG		B43_PHY_N(0x174) /* # data tones TGNsync 40 sig */
#define B43_NPHY_WWISE_CRCM0			B43_PHY_N(0x175) /* WWiSE CRC mask 0 */
#define B43_NPHY_WWISE_CRCM1			B43_PHY_N(0x176) /* WWiSE CRC mask 1 */
#define B43_NPHY_WWISE_CRCM2			B43_PHY_N(0x177) /* WWiSE CRC mask 2 */
#define B43_NPHY_WWISE_CRCM3			B43_PHY_N(0x178) /* WWiSE CRC mask 3 */
#define B43_NPHY_WWISE_CRCM4			B43_PHY_N(0x179) /* WWiSE CRC mask 4 */
#define B43_NPHY_CHANEST_CDDSH			B43_PHY_N(0x17A) /* Channel estimate CDD shift */
#define B43_NPHY_HTAGC_WCNT			B43_PHY_N(0x17B) /* HT ADC wait counters */
#define B43_NPHY_SQPARM				B43_PHY_N(0x17C) /* SQ params */
#define B43_NPHY_MCSDUP6M			B43_PHY_N(0x17D) /* MCS dup 6M */
#define B43_NPHY_NDATAT_DUP40			B43_PHY_N(0x17E) /* # data tones dup 40 */
#define B43_NPHY_DUP40_TGNSYNC_CYCD		B43_PHY_N(0x17F) /* Dup40 TGNsync cycle data */
#define B43_NPHY_DUP40_GFBL			B43_PHY_N(0x180) /* Dup40 GF format BL address */
#define B43_NPHY_DUP40_BL			B43_PHY_N(0x181) /* Dup40 format BL address */
#define B43_NPHY_LEGDUP_FTA			B43_PHY_N(0x182) /* Legacy dup frm table address */
#define B43_NPHY_PACPROC_DBG			B43_PHY_N(0x183) /* Packet processing debug */
#define B43_NPHY_PIL_CYC1			B43_PHY_N(0x184) /* Pilot cycle counter 1 */
#define B43_NPHY_PIL_CYC2			B43_PHY_N(0x185) /* Pilot cycle counter 2 */
#define B43_NPHY_TXF_20CO_S0A1			B43_PHY_N(0x186) /* TX filter 20 coeff stage 0 A1 */
#define B43_NPHY_TXF_20CO_S0A2			B43_PHY_N(0x187) /* TX filter 20 coeff stage 0 A2 */
#define B43_NPHY_TXF_20CO_S1A1			B43_PHY_N(0x188) /* TX filter 20 coeff stage 1 A1 */
#define B43_NPHY_TXF_20CO_S1A2			B43_PHY_N(0x189) /* TX filter 20 coeff stage 1 A2 */
#define B43_NPHY_TXF_20CO_S2A1			B43_PHY_N(0x18A) /* TX filter 20 coeff stage 2 A1 */
#define B43_NPHY_TXF_20CO_S2A2			B43_PHY_N(0x18B) /* TX filter 20 coeff stage 2 A2 */
#define B43_NPHY_TXF_20CO_S0B1			B43_PHY_N(0x18C) /* TX filter 20 coeff stage 0 B1 */
#define B43_NPHY_TXF_20CO_S0B2			B43_PHY_N(0x18D) /* TX filter 20 coeff stage 0 B2 */
#define B43_NPHY_TXF_20CO_S0B3			B43_PHY_N(0x18E) /* TX filter 20 coeff stage 0 B3 */
#define B43_NPHY_TXF_20CO_S1B1			B43_PHY_N(0x18F) /* TX filter 20 coeff stage 1 B1 */
#define B43_NPHY_TXF_20CO_S1B2			B43_PHY_N(0x190) /* TX filter 20 coeff stage 1 B2 */
#define B43_NPHY_TXF_20CO_S1B3			B43_PHY_N(0x191) /* TX filter 20 coeff stage 1 B3 */
#define B43_NPHY_TXF_20CO_S2B1			B43_PHY_N(0x192) /* TX filter 20 coeff stage 2 B1 */
#define B43_NPHY_TXF_20CO_S2B2			B43_PHY_N(0x193) /* TX filter 20 coeff stage 2 B2 */
#define B43_NPHY_TXF_20CO_S2B3			B43_PHY_N(0x194) /* TX filter 20 coeff stage 2 B3 */
#define B43_NPHY_TXF_40CO_S0A1			B43_PHY_N(0x195) /* TX filter 40 coeff stage 0 A1 */
#define B43_NPHY_TXF_40CO_S0A2			B43_PHY_N(0x196) /* TX filter 40 coeff stage 0 A2 */
#define B43_NPHY_TXF_40CO_S1A1			B43_PHY_N(0x197) /* TX filter 40 coeff stage 1 A1 */
#define B43_NPHY_TXF_40CO_S1A2			B43_PHY_N(0x198) /* TX filter 40 coeff stage 1 A2 */
#define B43_NPHY_TXF_40CO_S2A1			B43_PHY_N(0x199) /* TX filter 40 coeff stage 2 A1 */
#define B43_NPHY_TXF_40CO_S2A2			B43_PHY_N(0x19A) /* TX filter 40 coeff stage 2 A2 */
#define B43_NPHY_TXF_40CO_S0B1			B43_PHY_N(0x19B) /* TX filter 40 coeff stage 0 B1 */
#define B43_NPHY_TXF_40CO_S0B2			B43_PHY_N(0x19C) /* TX filter 40 coeff stage 0 B2 */
#define B43_NPHY_TXF_40CO_S0B3			B43_PHY_N(0x19D) /* TX filter 40 coeff stage 0 B3 */
#define B43_NPHY_TXF_40CO_S1B1			B43_PHY_N(0x19E) /* TX filter 40 coeff stage 1 B1 */
#define B43_NPHY_TXF_40CO_S1B2			B43_PHY_N(0x19F) /* TX filter 40 coeff stage 1 B2 */
#define B43_NPHY_TXF_40CO_S1B3			B43_PHY_N(0x1A0) /* TX filter 40 coeff stage 1 B3 */
#define B43_NPHY_TXF_40CO_S2B1			B43_PHY_N(0x1A1) /* TX filter 40 coeff stage 2 B1 */
#define B43_NPHY_TXF_40CO_S2B2			B43_PHY_N(0x1A2) /* TX filter 40 coeff stage 2 B2 */
#define B43_NPHY_TXF_40CO_S2B3			B43_PHY_N(0x1A3) /* TX filter 40 coeff stage 2 B3 */
#define B43_NPHY_RSSIMC_0I_RSSI_X		B43_PHY_N(0x1A4) /* RSSI multiplication coefficient 0 I RSSI X */
#define B43_NPHY_RSSIMC_0I_RSSI_Y		B43_PHY_N(0x1A5) /* RSSI multiplication coefficient 0 I RSSI Y */
#define B43_NPHY_RSSIMC_0I_RSSI_Z		B43_PHY_N(0x1A6) /* RSSI multiplication coefficient 0 I RSSI Z */
#define B43_NPHY_RSSIMC_0I_TBD			B43_PHY_N(0x1A7) /* RSSI multiplication coefficient 0 I TBD */
#define B43_NPHY_RSSIMC_0I_PWRDET		B43_PHY_N(0x1A8) /* RSSI multiplication coefficient 0 I power det */
#define B43_NPHY_RSSIMC_0I_TSSI			B43_PHY_N(0x1A9) /* RSSI multiplication coefficient 0 I TSSI */
#define B43_NPHY_RSSIMC_0Q_RSSI_X		B43_PHY_N(0x1AA) /* RSSI multiplication coefficient 0 Q RSSI X */
#define B43_NPHY_RSSIMC_0Q_RSSI_Y		B43_PHY_N(0x1AB) /* RSSI multiplication coefficient 0 Q RSSI Y */
#define B43_NPHY_RSSIMC_0Q_RSSI_Z		B43_PHY_N(0x1AC) /* RSSI multiplication coefficient 0 Q RSSI Z */
#define B43_NPHY_RSSIMC_0Q_TBD			B43_PHY_N(0x1AD) /* RSSI multiplication coefficient 0 Q TBD */
#define B43_NPHY_RSSIMC_0Q_PWRDET		B43_PHY_N(0x1AE) /* RSSI multiplication coefficient 0 Q power det */
#define B43_NPHY_RSSIMC_0Q_TSSI			B43_PHY_N(0x1AF) /* RSSI multiplication coefficient 0 Q TSSI */
#define B43_NPHY_RSSIMC_1I_RSSI_X		B43_PHY_N(0x1B0) /* RSSI multiplication coefficient 1 I RSSI X */
#define B43_NPHY_RSSIMC_1I_RSSI_Y		B43_PHY_N(0x1B1) /* RSSI multiplication coefficient 1 I RSSI Y */
#define B43_NPHY_RSSIMC_1I_RSSI_Z		B43_PHY_N(0x1B2) /* RSSI multiplication coefficient 1 I RSSI Z */
#define B43_NPHY_RSSIMC_1I_TBD			B43_PHY_N(0x1B3) /* RSSI multiplication coefficient 1 I TBD */
#define B43_NPHY_RSSIMC_1I_PWRDET		B43_PHY_N(0x1B4) /* RSSI multiplication coefficient 1 I power det */
#define B43_NPHY_RSSIMC_1I_TSSI			B43_PHY_N(0x1B5) /* RSSI multiplication coefficient 1 I TSSI */
#define B43_NPHY_RSSIMC_1Q_RSSI_X		B43_PHY_N(0x1B6) /* RSSI multiplication coefficient 1 Q RSSI X */
#define B43_NPHY_RSSIMC_1Q_RSSI_Y		B43_PHY_N(0x1B7) /* RSSI multiplication coefficient 1 Q RSSI Y */
#define B43_NPHY_RSSIMC_1Q_RSSI_Z		B43_PHY_N(0x1B8) /* RSSI multiplication coefficient 1 Q RSSI Z */
#define B43_NPHY_RSSIMC_1Q_TBD			B43_PHY_N(0x1B9) /* RSSI multiplication coefficient 1 Q TBD */
#define B43_NPHY_RSSIMC_1Q_PWRDET		B43_PHY_N(0x1BA) /* RSSI multiplication coefficient 1 Q power det */
#define B43_NPHY_RSSIMC_1Q_TSSI			B43_PHY_N(0x1BB) /* RSSI multiplication coefficient 1 Q TSSI */
#define B43_NPHY_SAMC_WCNT			B43_PHY_N(0x1BC) /* Sample collect wait counter */
#define B43_NPHY_PTHROUGH_CNT			B43_PHY_N(0x1BD) /* Pass-through counter */
#define B43_NPHY_LTRN_OFF_G20L			B43_PHY_N(0x1C4) /* LTRN offset gain 20L */
#define B43_NPHY_LTRN_OFF_20L			B43_PHY_N(0x1C5) /* LTRN offset 20L */
#define B43_NPHY_LTRN_OFF_G20U			B43_PHY_N(0x1C6) /* LTRN offset gain 20U */
#define B43_NPHY_LTRN_OFF_20U			B43_PHY_N(0x1C7) /* LTRN offset 20U */
#define B43_NPHY_DSSSCCK_GAINSL			B43_PHY_N(0x1C8) /* DSSS/CCK gain settle length */
#define B43_NPHY_GPIO_LOOUT			B43_PHY_N(0x1C9) /* GPIO low out */
#define B43_NPHY_GPIO_HIOUT			B43_PHY_N(0x1CA) /* GPIO high out */
#define B43_NPHY_CRS_CHECK			B43_PHY_N(0x1CB) /* CRS check */
#define B43_NPHY_ML_LOGSS_RAT			B43_PHY_N(0x1CC) /* ML/logss ratio */
#define B43_NPHY_DUPSCALE			B43_PHY_N(0x1CD) /* Dup scale */
#define B43_NPHY_BW1A				B43_PHY_N(0x1CE) /* BW 1A */
#define B43_NPHY_BW2				B43_PHY_N(0x1CF) /* BW 2 */
#define B43_NPHY_BW3				B43_PHY_N(0x1D0) /* BW 3 */
#define B43_NPHY_BW4				B43_PHY_N(0x1D1) /* BW 4 */
#define B43_NPHY_BW5				B43_PHY_N(0x1D2) /* BW 5 */
#define B43_NPHY_BW6				B43_PHY_N(0x1D3) /* BW 6 */
#define B43_NPHY_COALEN0			B43_PHY_N(0x1D4) /* Coarse length 0 */
#define B43_NPHY_COALEN1			B43_PHY_N(0x1D5) /* Coarse length 1 */
#define B43_NPHY_CRSTHRES_1U			B43_PHY_N(0x1D6) /* CRS threshold 1 U */
#define B43_NPHY_CRSTHRES_2U			B43_PHY_N(0x1D7) /* CRS threshold 2 U */
#define B43_NPHY_CRSTHRES_3U			B43_PHY_N(0x1D8) /* CRS threshold 3 U */
#define B43_NPHY_CRSCTL_U			B43_PHY_N(0x1D9) /* CRS control U */
#define B43_NPHY_CRSTHRES_1L			B43_PHY_N(0x1DA) /* CRS threshold 1 L */
#define B43_NPHY_CRSTHRES_2L			B43_PHY_N(0x1DB) /* CRS threshold 2 L */
#define B43_NPHY_CRSTHRES_3L			B43_PHY_N(0x1DC) /* CRS threshold 3 L */
#define B43_NPHY_CRSCTL_L			B43_PHY_N(0x1DD) /* CRS control L */
#define B43_NPHY_STRA_1U			B43_PHY_N(0x1DE) /* STR address 1 U */
#define B43_NPHY_STRA_2U			B43_PHY_N(0x1DF) /* STR address 2 U */
#define B43_NPHY_STRA_1L			B43_PHY_N(0x1E0) /* STR address 1 L */
#define B43_NPHY_STRA_2L			B43_PHY_N(0x1E1) /* STR address 2 L */
#define B43_NPHY_CRSCHECK1			B43_PHY_N(0x1E2) /* CRS check 1 */
#define B43_NPHY_CRSCHECK2			B43_PHY_N(0x1E3) /* CRS check 2 */
#define B43_NPHY_CRSCHECK3			B43_PHY_N(0x1E4) /* CRS check 3 */
#define B43_NPHY_JMPSTP0			B43_PHY_N(0x1E5) /* Jump step 0 */
#define B43_NPHY_JMPSTP1			B43_PHY_N(0x1E6) /* Jump step 1 */
#define B43_NPHY_TXPCTL_CMD			B43_PHY_N(0x1E7) /* TX power control command */
#define  B43_NPHY_TXPCTL_CMD_INIT		0x007F /* Init */
#define  B43_NPHY_TXPCTL_CMD_INIT_SHIFT		0
#define  B43_NPHY_TXPCTL_CMD_COEFF		0x2000 /* Power control coefficients */
#define  B43_NPHY_TXPCTL_CMD_HWPCTLEN		0x4000 /* Hardware TX power control enable */
#define  B43_NPHY_TXPCTL_CMD_PCTLEN		0x8000 /* TX power control enable */
#define B43_NPHY_TXPCTL_N			B43_PHY_N(0x1E8) /* TX power control N num */
#define  B43_NPHY_TXPCTL_N_TSSID		0x00FF /* N TSSI delay */
#define  B43_NPHY_TXPCTL_N_TSSID_SHIFT		0
#define  B43_NPHY_TXPCTL_N_NPTIL2		0x0700 /* N PT integer log2 */
#define  B43_NPHY_TXPCTL_N_NPTIL2_SHIFT		8
#define B43_NPHY_TXPCTL_ITSSI			B43_PHY_N(0x1E9) /* TX power control idle TSSI */
#define  B43_NPHY_TXPCTL_ITSSI_0		0x003F /* Idle TSSI 0 */
#define  B43_NPHY_TXPCTL_ITSSI_0_SHIFT		0
#define  B43_NPHY_TXPCTL_ITSSI_1		0x3F00 /* Idle TSSI 1 */
#define  B43_NPHY_TXPCTL_ITSSI_1_SHIFT		8
#define  B43_NPHY_TXPCTL_ITSSI_BINF		0x8000 /* Raw TSSI offset bin format */
#define B43_NPHY_TXPCTL_TPWR			B43_PHY_N(0x1EA) /* TX power control target power */
#define  B43_NPHY_TXPCTL_TPWR_0			0x00FF /* Power 0 */
#define  B43_NPHY_TXPCTL_TPWR_0_SHIFT		0
#define  B43_NPHY_TXPCTL_TPWR_1			0xFF00 /* Power 1 */
#define  B43_NPHY_TXPCTL_TPWR_1_SHIFT		8
#define B43_NPHY_TXPCTL_BIDX			B43_PHY_N(0x1EB) /* TX power control base index */
#define  B43_NPHY_TXPCTL_BIDX_0			0x007F /* uC base index 0 */
#define  B43_NPHY_TXPCTL_BIDX_0_SHIFT		0
#define  B43_NPHY_TXPCTL_BIDX_1			0x7F00 /* uC base index 1 */
#define  B43_NPHY_TXPCTL_BIDX_1_SHIFT		8
#define  B43_NPHY_TXPCTL_BIDX_LOAD		0x8000 /* Load base index */
#define B43_NPHY_TXPCTL_PIDX			B43_PHY_N(0x1EC) /* TX power control power index */
#define  B43_NPHY_TXPCTL_PIDX_0			0x007F /* uC power index 0 */
#define  B43_NPHY_TXPCTL_PIDX_0_SHIFT		0
#define  B43_NPHY_TXPCTL_PIDX_1			0x7F00 /* uC power index 1 */
#define  B43_NPHY_TXPCTL_PIDX_1_SHIFT		8
#define B43_NPHY_C1_TXPCTL_STAT			B43_PHY_N(0x1ED) /* Core 1 TX power control status */
#define B43_NPHY_C2_TXPCTL_STAT			B43_PHY_N(0x1EE) /* Core 2 TX power control status */
#define  B43_NPHY_TXPCTL_STAT_EST		0x00FF /* Estimated power */
#define  B43_NPHY_TXPCTL_STAT_EST_SHIFT		0
#define  B43_NPHY_TXPCTL_STAT_BIDX		0x7F00 /* Base index */
#define  B43_NPHY_TXPCTL_STAT_BIDX_SHIFT	8
#define  B43_NPHY_TXPCTL_STAT_ESTVALID		0x8000 /* Estimated power valid */
#define B43_NPHY_SMALLSGS_LEN			B43_PHY_N(0x1EF) /* Small sig gain settle length */
#define B43_NPHY_PHYSTAT_GAIN0			B43_PHY_N(0x1F0) /* PHY stats gain info 0 */
#define B43_NPHY_PHYSTAT_GAIN1			B43_PHY_N(0x1F1) /* PHY stats gain info 1 */
#define B43_NPHY_PHYSTAT_FREQEST		B43_PHY_N(0x1F2) /* PHY stats frequency estimate */
#define B43_NPHY_PHYSTAT_ADVRET			B43_PHY_N(0x1F3) /* PHY stats ADV retard */
#define B43_NPHY_PHYLB_MODE			B43_PHY_N(0x1F4) /* PHY loopback mode */
#define B43_NPHY_TONE_MIDX20_1			B43_PHY_N(0x1F5) /* Tone map index 20/1 */
#define B43_NPHY_TONE_MIDX20_2			B43_PHY_N(0x1F6) /* Tone map index 20/2 */
#define B43_NPHY_TONE_MIDX20_3			B43_PHY_N(0x1F7) /* Tone map index 20/3 */
#define B43_NPHY_TONE_MIDX40_1			B43_PHY_N(0x1F8) /* Tone map index 40/1 */
#define B43_NPHY_TONE_MIDX40_2			B43_PHY_N(0x1F9) /* Tone map index 40/2 */
#define B43_NPHY_TONE_MIDX40_3			B43_PHY_N(0x1FA) /* Tone map index 40/3 */
#define B43_NPHY_TONE_MIDX40_4			B43_PHY_N(0x1FB) /* Tone map index 40/4 */
#define B43_NPHY_PILTONE_MIDX1			B43_PHY_N(0x1FC) /* Pilot tone map index 1 */
#define B43_NPHY_PILTONE_MIDX2			B43_PHY_N(0x1FD) /* Pilot tone map index 2 */
#define B43_NPHY_PILTONE_MIDX3			B43_PHY_N(0x1FE) /* Pilot tone map index 3 */
#define B43_NPHY_TXRIFS_FRDEL			B43_PHY_N(0x1FF) /* TX RIFS frame delay */
#define B43_NPHY_AFESEQ_RX2TX_PUD_40M		B43_PHY_N(0x200) /* AFE seq rx2tx power up/down delay 40M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_40M		B43_PHY_N(0x201) /* AFE seq tx2rx power up/down delay 40M */
#define B43_NPHY_AFESEQ_RX2TX_PUD_20M		B43_PHY_N(0x202) /* AFE seq rx2tx power up/down delay 20M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_20M		B43_PHY_N(0x203) /* AFE seq tx2rx power up/down delay 20M */
#define B43_NPHY_RX_SIGCTL			B43_PHY_N(0x204) /* RX signal control */
#define B43_NPHY_RXPIL_CYCNT0			B43_PHY_N(0x205) /* RX pilot cycle counter 0 */
#define B43_NPHY_RXPIL_CYCNT1			B43_PHY_N(0x206) /* RX pilot cycle counter 1 */
#define B43_NPHY_RXPIL_CYCNT2			B43_PHY_N(0x207) /* RX pilot cycle counter 2 */
#define B43_NPHY_AFESEQ_RX2TX_PUD_10M		B43_PHY_N(0x208) /* AFE seq rx2tx power up/down delay 10M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_10M		B43_PHY_N(0x209) /* AFE seq tx2rx power up/down delay 10M */
#define B43_NPHY_DSSSCCK_CRSEXTL		B43_PHY_N(0x20A) /* DSSS/CCK CRS extension length */
#define B43_NPHY_ML_LOGSS_RATSLOPE		B43_PHY_N(0x20B) /* ML/logss ratio slope */
#define B43_NPHY_RIFS_SRCTL			B43_PHY_N(0x20C) /* RIFS search timeout length */
#define B43_NPHY_TXREALFD			B43_PHY_N(0x20D) /* TX real frame delay */
#define B43_NPHY_HPANT_SWTHRES			B43_PHY_N(0x20E) /* High power antenna switch threshold */
#define B43_NPHY_EDCRS_ASSTHRES0		B43_PHY_N(0x210) /* ED CRS assert threshold 0 */
#define B43_NPHY_EDCRS_ASSTHRES1		B43_PHY_N(0x211) /* ED CRS assert threshold 1 */
#define B43_NPHY_EDCRS_DEASSTHRES0		B43_PHY_N(0x212) /* ED CRS deassert threshold 0 */
#define B43_NPHY_EDCRS_DEASSTHRES1		B43_PHY_N(0x213) /* ED CRS deassert threshold 1 */
#define B43_NPHY_STR_WTIME20U			B43_PHY_N(0x214) /* STR wait time 20U */
#define B43_NPHY_STR_WTIME20L			B43_PHY_N(0x215) /* STR wait time 20L */
#define B43_NPHY_TONE_MIDX657M			B43_PHY_N(0x216) /* Tone map index 657M */
#define B43_NPHY_HTSIGTONES			B43_PHY_N(0x217) /* HT signal tones */
#define B43_NPHY_RSSI1				B43_PHY_N(0x219) /* RSSI value 1 */
#define B43_NPHY_RSSI2				B43_PHY_N(0x21A) /* RSSI value 2 */
#define B43_NPHY_CHAN_ESTHANG			B43_PHY_N(0x21D) /* Channel estimate hang */
#define B43_NPHY_FINERX2_CGC			B43_PHY_N(0x221) /* Fine RX 2 clock gate control */
#define  B43_NPHY_FINERX2_CGC_DECGC		0x0008 /* Decode gated clocks */
#define B43_NPHY_TXPCTL_INIT			B43_PHY_N(0x222) /* TX power controll init */
#define  B43_NPHY_TXPCTL_INIT_PIDXI1		0x00FF /* Power index init 1 */
#define  B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT	0
M
b43: Add Broadcom 2055 radio register definitions  
Michael Buesch 已提交
710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 

/* Broadcom 2055 radio registers */

#define B2055_GEN_SPARE			0x00 /* GEN spare */
#define B2055_SP_PINPD			0x02 /* SP PIN PD */
#define B2055_C1_SP_RSSI		0x03 /* SP RSSI Core 1 */
#define B2055_C1_SP_PDMISC		0x04 /* SP PD MISC Core 1 */
#define B2055_C2_SP_RSSI		0x05 /* SP RSSI Core 2 */
#define B2055_C2_SP_PDMISC		0x06 /* SP PD MISC Core 2 */
#define B2055_C1_SP_RXGC1		0x07 /* SP RX GC1 Core 1 */
#define B2055_C1_SP_RXGC2		0x08 /* SP RX GC2 Core 1 */
#define B2055_C2_SP_RXGC1		0x09 /* SP RX GC1 Core 2 */
#define B2055_C2_SP_RXGC2		0x0A /* SP RX GC2 Core 2 */
#define B2055_C1_SP_LPFBWSEL		0x0B /* SP LPF BW select Core 1 */
#define B2055_C2_SP_LPFBWSEL		0x0C /* SP LPF BW select Core 2 */
#define B2055_C1_SP_TXGC1		0x0D /* SP TX GC1 Core 1 */
#define B2055_C1_SP_TXGC2		0x0E /* SP TX GC2 Core 1 */
#define B2055_C2_SP_TXGC1		0x0F /* SP TX GC1 Core 2 */
#define B2055_C2_SP_TXGC2		0x10 /* SP TX GC2 Core 2 */
#define B2055_MASTER1			0x11 /* Master control 1 */
#define B2055_MASTER2			0x12 /* Master control 2 */
#define B2055_PD_LGEN			0x13 /* PD LGEN */
#define B2055_PD_PLLTS			0x14 /* PD PLL TS */
#define B2055_C1_PD_LGBUF		0x15 /* PD Core 1 LGBUF */
#define B2055_C1_PD_TX			0x16 /* PD Core 1 TX */
#define B2055_C1_PD_RXTX		0x17 /* PD Core 1 RXTX */
#define B2055_C1_PD_RSSIMISC		0x18 /* PD Core 1 RSSI MISC */
#define B2055_C2_PD_LGBUF		0x19 /* PD Core 2 LGBUF */
#define B2055_C2_PD_TX			0x1A /* PD Core 2 TX */
#define B2055_C2_PD_RXTX		0x1B /* PD Core 2 RXTX */
#define B2055_C2_PD_RSSIMISC		0x1C /* PD Core 2 RSSI MISC */
#define B2055_PWRDET_LGEN		0x1D /* PWRDET LGEN */
#define B2055_C1_PWRDET_LGBUF		0x1E /* PWRDET LGBUF Core 1 */
#define B2055_C1_PWRDET_RXTX		0x1F /* PWRDET RXTX Core 1 */
#define B2055_C2_PWRDET_LGBUF		0x20 /* PWRDET LGBUF Core 2 */
#define B2055_C2_PWRDET_RXTX		0x21 /* PWRDET RXTX Core 2 */
#define B2055_RRCCAL_CS			0x22 /* RRCCAL Control spare */
#define B2055_RRCCAL_NOPTSEL		0x23 /* RRCCAL N OPT SEL */
#define B2055_CAL_MISC			0x24 /* CAL MISC */
#define B2055_CAL_COUT			0x25 /* CAL Counter out */
#define B2055_CAL_COUT2			0x26 /* CAL Counter out 2 */
#define B2055_CAL_CVARCTL		0x27 /* CAL CVAR Control */
#define B2055_CAL_RVARCTL		0x28 /* CAL RVAR Control */
#define B2055_CAL_LPOCTL		0x29 /* CAL LPO Control */
#define B2055_CAL_TS			0x2A /* CAL TS */
#define B2055_CAL_RCCALRTS		0x2B /* CAL RCCAL READ TS */
#define B2055_CAL_RCALRTS		0x2C /* CAL RCAL READ TS */
#define B2055_PADDRV			0x2D /* PAD driver */
#define B2055_XOCTL1			0x2E /* XO Control 1 */
#define B2055_XOCTL2			0x2F /* XO Control 2 */
#define B2055_XOREGUL			0x30 /* XO Regulator */
#define B2055_XOMISC			0x31 /* XO misc */
#define B2055_PLL_LFC1			0x32 /* PLL LF C1 */
#define B2055_PLL_CALVTH		0x33 /* PLL CAL VTH */
#define B2055_PLL_LFC2			0x34 /* PLL LF C2 */
#define B2055_PLL_REF			0x35 /* PLL reference */
#define B2055_PLL_LFR1			0x36 /* PLL LF R1 */
#define B2055_PLL_PFDCP			0x37 /* PLL PFD CP */
#define B2055_PLL_IDAC_CPOPAMP		0x38 /* PLL IDAC CPOPAMP */
#define B2055_PLL_CPREG			0x39 /* PLL CP Regulator */
#define B2055_PLL_RCAL			0x3A /* PLL RCAL */
#define B2055_RF_PLLMOD0		0x3B /* RF PLL MOD0 */
#define B2055_RF_PLLMOD1		0x3C /* RF PLL MOD1 */
#define B2055_RF_MMDIDAC1		0x3D /* RF MMD IDAC 1 */
#define B2055_RF_MMDIDAC0		0x3E /* RF MMD IDAC 0 */
#define B2055_RF_MMDSP			0x3F /* RF MMD spare */
#define B2055_VCO_CAL1			0x40 /* VCO cal 1 */
#define B2055_VCO_CAL2			0x41 /* VCO cal 2 */
#define B2055_VCO_CAL3			0x42 /* VCO cal 3 */
#define B2055_VCO_CAL4			0x43 /* VCO cal 4 */
#define B2055_VCO_CAL5			0x44 /* VCO cal 5 */
#define B2055_VCO_CAL6			0x45 /* VCO cal 6 */
#define B2055_VCO_CAL7			0x46 /* VCO cal 7 */
#define B2055_VCO_CAL8			0x47 /* VCO cal 8 */
#define B2055_VCO_CAL9			0x48 /* VCO cal 9 */
#define B2055_VCO_CAL10			0x49 /* VCO cal 10 */
#define B2055_VCO_CAL11			0x4A /* VCO cal 11 */
#define B2055_VCO_CAL12			0x4B /* VCO cal 12 */
#define B2055_VCO_CAL13			0x4C /* VCO cal 13 */
#define B2055_VCO_CAL14			0x4D /* VCO cal 14 */
#define B2055_VCO_CAL15			0x4E /* VCO cal 15 */
#define B2055_VCO_CAL16			0x4F /* VCO cal 16 */
#define B2055_VCO_KVCO			0x50 /* VCO KVCO */
#define B2055_VCO_CAPTAIL		0x51 /* VCO CAP TAIL */
#define B2055_VCO_IDACVCO		0x52 /* VCO IDAC VCO */
#define B2055_VCO_REG			0x53 /* VCO Regulator */
#define B2055_PLL_RFVTH			0x54 /* PLL RF VTH */
#define B2055_LGBUF_CENBUF		0x55 /* LGBUF CEN BUF */
#define B2055_LGEN_TUNE1		0x56 /* LGEN tune 1 */
#define B2055_LGEN_TUNE2		0x57 /* LGEN tune 2 */
#define B2055_LGEN_IDAC1		0x58 /* LGEN IDAC 1 */
#define B2055_LGEN_IDAC2		0x59 /* LGEN IDAC 2 */
#define B2055_LGEN_BIASC		0x5A /* LGEN BIAS counter */
#define B2055_LGEN_BIASIDAC		0x5B /* LGEN BIAS IDAC */
#define B2055_LGEN_RCAL			0x5C /* LGEN RCAL */
#define B2055_LGEN_DIV			0x5D /* LGEN div */
#define B2055_LGEN_SPARE2		0x5E /* LGEN spare 2 */
#define B2055_C1_LGBUF_ATUNE		0x5F /* Core 1 LGBUF A tune */
#define B2055_C1_LGBUF_GTUNE		0x60 /* Core 1 LGBUF G tune */
#define B2055_C1_LGBUF_DIV		0x61 /* Core 1 LGBUF div */
#define B2055_C1_LGBUF_AIDAC		0x62 /* Core 1 LGBUF A IDAC */
#define B2055_C1_LGBUF_GIDAC		0x63 /* Core 1 LGBUF G IDAC */
#define B2055_C1_LGBUF_IDACFO		0x64 /* Core 1 LGBUF IDAC filter override */
#define B2055_C1_LGBUF_SPARE		0x65 /* Core 1 LGBUF spare */
#define B2055_C1_RX_RFSPC1		0x66 /* Core 1 RX RF SPC1 */
#define B2055_C1_RX_RFR1		0x67 /* Core 1 RX RF reg 1 */
#define B2055_C1_RX_RFR2		0x68 /* Core 1 RX RF reg 2 */
#define B2055_C1_RX_RFRCAL		0x69 /* Core 1 RX RF RCAL */
#define B2055_C1_RX_BB_BLCMP		0x6A /* Core 1 RX Baseband BUFI LPF CMP */
#define B2055_C1_RX_BB_LPF		0x6B /* Core 1 RX Baseband LPF */
#define B2055_C1_RX_BB_MIDACHP		0x6C /* Core 1 RX Baseband MIDAC High-pass */
#define B2055_C1_RX_BB_VGA1IDAC		0x6D /* Core 1 RX Baseband VGA1 IDAC */
#define B2055_C1_RX_BB_VGA2IDAC		0x6E /* Core 1 RX Baseband VGA2 IDAC */
#define B2055_C1_RX_BB_VGA3IDAC		0x6F /* Core 1 RX Baseband VGA3 IDAC */
#define B2055_C1_RX_BB_BUFOCTL		0x70 /* Core 1 RX Baseband BUFO Control */
#define B2055_C1_RX_BB_RCCALCTL		0x71 /* Core 1 RX Baseband RCCAL Control */
#define B2055_C1_RX_BB_RSSICTL1		0x72 /* Core 1 RX Baseband RSSI Control 1 */
#define B2055_C1_RX_BB_RSSICTL2		0x73 /* Core 1 RX Baseband RSSI Control 2 */
#define B2055_C1_RX_BB_RSSICTL3		0x74 /* Core 1 RX Baseband RSSI Control 3 */
#define B2055_C1_RX_BB_RSSICTL4		0x75 /* Core 1 RX Baseband RSSI Control 4 */
#define B2055_C1_RX_BB_RSSICTL5		0x76 /* Core 1 RX Baseband RSSI Control 5 */
#define B2055_C1_RX_BB_REG		0x77 /* Core 1 RX Baseband Regulator */
#define B2055_C1_RX_BB_SPARE1		0x78 /* Core 1 RX Baseband spare 1 */
#define B2055_C1_RX_TXBBRCAL		0x79 /* Core 1 RX TX BB RCAL */
#define B2055_C1_TX_RF_SPGA		0x7A /* Core 1 TX RF SGM PGA */
#define B2055_C1_TX_RF_SPAD		0x7B /* Core 1 TX RF SGM PAD */
#define B2055_C1_TX_RF_CNTPGA1		0x7C /* Core 1 TX RF counter PGA 1 */
#define B2055_C1_TX_RF_CNTPAD1		0x7D /* Core 1 TX RF counter PAD 1 */
#define B2055_C1_TX_RF_PGAIDAC		0x7E /* Core 1 TX RF PGA IDAC */
#define B2055_C1_TX_PGAPADTN		0x7F /* Core 1 TX PGA PAD TN */
#define B2055_C1_TX_PADIDAC1		0x80 /* Core 1 TX PAD IDAC 1 */
#define B2055_C1_TX_PADIDAC2		0x81 /* Core 1 TX PAD IDAC 2 */
#define B2055_C1_TX_MXBGTRIM		0x82 /* Core 1 TX MX B/G TRIM */
#define B2055_C1_TX_RF_RCAL		0x83 /* Core 1 TX RF RCAL */
#define B2055_C1_TX_RF_PADTSSI1		0x84 /* Core 1 TX RF PAD TSSI1 */
#define B2055_C1_TX_RF_PADTSSI2		0x85 /* Core 1 TX RF PAD TSSI2 */
#define B2055_C1_TX_RF_SPARE		0x86 /* Core 1 TX RF spare */
#define B2055_C1_TX_RF_IQCAL1		0x87 /* Core 1 TX RF I/Q CAL 1 */
#define B2055_C1_TX_RF_IQCAL2		0x88 /* Core 1 TX RF I/Q CAL 2 */
#define B2055_C1_TXBB_RCCAL		0x89 /* Core 1 TXBB RC CAL Control */
#define B2055_C1_TXBB_LPF1		0x8A /* Core 1 TXBB LPF 1 */
#define B2055_C1_TX_VOSCNCL		0x8B /* Core 1 TX VOS CNCL */
#define B2055_C1_TX_LPF_MXGMIDAC	0x8C /* Core 1 TX LPF MXGM IDAC */
#define B2055_C1_TX_BB_MXGM		0x8D /* Core 1 TX BB MXGM */
#define B2055_C2_LGBUF_ATUNE		0x8E /* Core 2 LGBUF A tune */
#define B2055_C2_LGBUF_GTUNE		0x8F /* Core 2 LGBUF G tune */
#define B2055_C2_LGBUF_DIV		0x90 /* Core 2 LGBUF div */
#define B2055_C2_LGBUF_AIDAC		0x91 /* Core 2 LGBUF A IDAC */
#define B2055_C2_LGBUF_GIDAC		0x92 /* Core 2 LGBUF G IDAC */
#define B2055_C2_LGBUF_IDACFO		0x93 /* Core 2 LGBUF IDAC filter override */
#define B2055_C2_LGBUF_SPARE		0x94 /* Core 2 LGBUF spare */
#define B2055_C2_RX_RFSPC1		0x95 /* Core 2 RX RF SPC1 */
#define B2055_C2_RX_RFR1		0x96 /* Core 2 RX RF reg 1 */
#define B2055_C2_RX_RFR2		0x97 /* Core 2 RX RF reg 2 */
#define B2055_C2_RX_RFRCAL		0x98 /* Core 2 RX RF RCAL */
#define B2055_C2_RX_BB_BLCMP		0x99 /* Core 2 RX Baseband BUFI LPF CMP */
#define B2055_C2_RX_BB_LPF		0x9A /* Core 2 RX Baseband LPF */
#define B2055_C2_RX_BB_MIDACHP		0x9B /* Core 2 RX Baseband MIDAC High-pass */
#define B2055_C2_RX_BB_VGA1IDAC		0x9C /* Core 2 RX Baseband VGA1 IDAC */
#define B2055_C2_RX_BB_VGA2IDAC		0x9D /* Core 2 RX Baseband VGA2 IDAC */
#define B2055_C2_RX_BB_VGA3IDAC		0x9E /* Core 2 RX Baseband VGA3 IDAC */
#define B2055_C2_RX_BB_BUFOCTL		0x9F /* Core 2 RX Baseband BUFO Control */
#define B2055_C2_RX_BB_RCCALCTL		0xA0 /* Core 2 RX Baseband RCCAL Control */
#define B2055_C2_RX_BB_RSSICTL1		0xA1 /* Core 2 RX Baseband RSSI Control 1 */
#define B2055_C2_RX_BB_RSSICTL2		0xA2 /* Core 2 RX Baseband RSSI Control 2 */
#define B2055_C2_RX_BB_RSSICTL3		0xA3 /* Core 2 RX Baseband RSSI Control 3 */
#define B2055_C2_RX_BB_RSSICTL4		0xA4 /* Core 2 RX Baseband RSSI Control 4 */
#define B2055_C2_RX_BB_RSSICTL5		0xA5 /* Core 2 RX Baseband RSSI Control 5 */
#define B2055_C2_RX_BB_REG		0xA6 /* Core 2 RX Baseband Regulator */
#define B2055_C2_RX_BB_SPARE1		0xA7 /* Core 2 RX Baseband spare 1 */
#define B2055_C2_RX_TXBBRCAL		0xA8 /* Core 2 RX TX BB RCAL */
#define B2055_C2_TX_RF_SPGA		0xA9 /* Core 2 TX RF SGM PGA */
#define B2055_C2_TX_RF_SPAD		0xAA /* Core 2 TX RF SGM PAD */
#define B2055_C2_TX_RF_CNTPGA1		0xAB /* Core 2 TX RF counter PGA 1 */
#define B2055_C2_TX_RF_CNTPAD1		0xAC /* Core 2 TX RF counter PAD 1 */
#define B2055_C2_TX_RF_PGAIDAC		0xAD /* Core 2 TX RF PGA IDAC */
#define B2055_C2_TX_PGAPADTN		0xAE /* Core 2 TX PGA PAD TN */
#define B2055_C2_TX_PADIDAC1		0xAF /* Core 2 TX PAD IDAC 1 */
#define B2055_C2_TX_PADIDAC2		0xB0 /* Core 2 TX PAD IDAC 2 */
#define B2055_C2_TX_MXBGTRIM		0xB1 /* Core 2 TX MX B/G TRIM */
#define B2055_C2_TX_RF_RCAL		0xB2 /* Core 2 TX RF RCAL */
#define B2055_C2_TX_RF_PADTSSI1		0xB3 /* Core 2 TX RF PAD TSSI1 */
#define B2055_C2_TX_RF_PADTSSI2		0xB4 /* Core 2 TX RF PAD TSSI2 */
#define B2055_C2_TX_RF_SPARE		0xB5 /* Core 2 TX RF spare */
#define B2055_C2_TX_RF_IQCAL1		0xB6 /* Core 2 TX RF I/Q CAL 1 */
#define B2055_C2_TX_RF_IQCAL2		0xB7 /* Core 2 TX RF I/Q CAL 2 */
#define B2055_C2_TXBB_RCCAL		0xB8 /* Core 2 TXBB RC CAL Control */
#define B2055_C2_TXBB_LPF1		0xB9 /* Core 2 TXBB LPF 1 */
#define B2055_C2_TX_VOSCNCL		0xBA /* Core 2 TX VOS CNCL */
#define B2055_C2_TX_LPF_MXGMIDAC	0xBB /* Core 2 TX LPF MXGM IDAC */
#define B2055_C2_TX_BB_MXGM		0xBC /* Core 2 TX BB MXGM */
#define B2055_PRG_GCHP21		0xBD /* PRG GC HPVGA23 21 */
#define B2055_PRG_GCHP22		0xBE /* PRG GC HPVGA23 22 */
#define B2055_PRG_GCHP23		0xBF /* PRG GC HPVGA23 23 */
#define B2055_PRG_GCHP24		0xC0 /* PRG GC HPVGA23 24 */
#define B2055_PRG_GCHP25		0xC1 /* PRG GC HPVGA23 25 */
#define B2055_PRG_GCHP26		0xC2 /* PRG GC HPVGA23 26 */
#define B2055_PRG_GCHP27		0xC3 /* PRG GC HPVGA23 27 */
#define B2055_PRG_GCHP28		0xC4 /* PRG GC HPVGA23 28 */
#define B2055_PRG_GCHP29		0xC5 /* PRG GC HPVGA23 29 */
#define B2055_PRG_GCHP30		0xC6 /* PRG GC HPVGA23 30 */
#define B2055_C1_LNA_GAINBST		0xCD /* Core 1 LNA GAINBST */
#define B2055_C1_B0NB_RSSIVCM		0xD2 /* Core 1 B0 narrow-band RSSI VCM */
#define B2055_C1_GENSPARE2		0xD6 /* Core 1 GEN spare 2 */
#define B2055_C2_LNA_GAINBST		0xD9 /* Core 2 LNA GAINBST */
#define B2055_C2_B0NB_RSSIVCM		0xDE /* Core 2 B0 narrow-band RSSI VCM */
#define B2055_C2_GENSPARE2		0xE2 /* Core 2 GEN spare 2 */
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
920 921 
struct b43_wldev;
M
b43: Implement dynamic PHY API  
Michael Buesch 已提交
922 923 
struct b43_phy_n {
	bool initialised;
M
b43: Don't compile N-PHY code when N-PHY is disabled  
Michael Buesch 已提交
924
M
b43: Implement dynamic PHY API  
Michael Buesch 已提交
925 926 
	//TODO lots of missing stuff
};
M
b43: Don't compile N-PHY code when N-PHY is disabled  
Michael Buesch 已提交
927
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
928
M
b43: Implement dynamic PHY API  
Michael Buesch 已提交
929 930 
struct b43_phy_operations;
extern const struct b43_phy_operations b43_phyops_n;
M
b43: Add NPHY radio init code  
Michael Buesch 已提交
931
M
b43: Add N-PHY register definitions  
Michael Buesch 已提交
932 
#endif /* B43_NPHY_H_ */