mach-rx1950.c 19.0 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
 *
 * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
 * Copyright (c) 2007-2010 Vasily Khoruzhick
 *
 * based on smdk2440 written by Ben Dooks
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
18
#include <linux/memblock.h>
19 20 21 22 23 24 25 26
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
K
Kay Sievers 已提交
27
#include <linux/device.h>
28
#include <linux/pda_power.h>
29 30
#include <linux/pwm_backlight.h>
#include <linux/pwm.h>
31
#include <linux/s3c_adc_battery.h>
32
#include <linux/leds.h>
33
#include <linux/i2c.h>
34 35 36 37 38 39 40 41 42 43 44 45

#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

#include <linux/mmc/host.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>

#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
46
#include <mach/regs-lcd.h>
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
#include <mach/h1940.h>
#include <mach/fb.h>

#include <plat/clock.h>
#include <plat/regs-serial.h>
#include <plat/regs-iic.h>
#include <plat/mci.h>
#include <plat/udc.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
#include <plat/ts.h>

63 64
#include <sound/uda1380.h>

65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136
#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353

static struct map_desc rx1950_iodesc[] __initdata = {
};

static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
	[0] = {
	       .name = "fclk",
	       .divisor = 0x0a,
	       .min_baud = 0,
	       .max_baud = 0,
	},
};

static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
	[0] = {
	       .hwport = 0,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x03,
	       .ufcon = 0x51,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
	[1] = {
	       .hwport = 1,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x03,
	       .ufcon = 0x51,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
	/* IR port */
	[2] = {
	       .hwport = 2,
	       .flags = 0,
	       .ucon = 0x3c5,
	       .ulcon = 0x43,
	       .ufcon = 0xf1,
	       .clocks = rx1950_serial_clocks,
	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
	},
};

static struct s3c2410fb_display rx1950_display = {
	.type = S3C2410_LCDCON1_TFT,
	.width = 240,
	.height = 320,
	.xres = 240,
	.yres = 320,
	.bpp = 16,

	.pixclock = 260000,
	.left_margin = 10,
	.right_margin = 20,
	.hsync_len = 10,
	.upper_margin = 2,
	.lower_margin = 2,
	.vsync_len = 2,

	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
			   S3C2410_LCDCON5_INVVCLK |
			   S3C2410_LCDCON5_INVVLINE |
			   S3C2410_LCDCON5_INVVFRAME |
			   S3C2410_LCDCON5_HWSWP |
			   (0x02 << 13) |
			   (0x02 << 15),

};

137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266
static int power_supply_init(struct device *dev)
{
	return gpio_request(S3C2410_GPF(2), "cable plugged");
}

static int rx1950_is_ac_online(void)
{
	return !gpio_get_value(S3C2410_GPF(2));
}

static void power_supply_exit(struct device *dev)
{
	gpio_free(S3C2410_GPF(2));
}

static char *rx1950_supplicants[] = {
	"main-battery"
};

static struct pda_power_pdata power_supply_info = {
	.init			= power_supply_init,
	.is_ac_online		= rx1950_is_ac_online,
	.exit			= power_supply_exit,
	.supplied_to		= rx1950_supplicants,
	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
};

static struct resource power_supply_resources[] = {
	[0] = {
			.name	= "ac",
			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
					  IORESOURCE_IRQ_HIGHEDGE,
			.start	= IRQ_EINT2,
			.end	= IRQ_EINT2,
	},
};

static struct platform_device power_supply = {
	.name			= "pda-power",
	.id			= -1,
	.dev			= {
					.platform_data =
						&power_supply_info,
	},
	.resource		= power_supply_resources,
	.num_resources		= ARRAY_SIZE(power_supply_resources),
};

static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
	{ .volt = 4100, .cur = 156, .level = 100},
	{ .volt = 4050, .cur = 156, .level = 95},
	{ .volt = 4025, .cur = 141, .level = 90},
	{ .volt = 3995, .cur = 144, .level = 85},
	{ .volt = 3957, .cur = 162, .level = 80},
	{ .volt = 3931, .cur = 147, .level = 75},
	{ .volt = 3902, .cur = 147, .level = 70},
	{ .volt = 3863, .cur = 153, .level = 65},
	{ .volt = 3838, .cur = 150, .level = 60},
	{ .volt = 3800, .cur = 153, .level = 55},
	{ .volt = 3765, .cur = 153, .level = 50},
	{ .volt = 3748, .cur = 172, .level = 45},
	{ .volt = 3740, .cur = 153, .level = 40},
	{ .volt = 3714, .cur = 175, .level = 35},
	{ .volt = 3710, .cur = 156, .level = 30},
	{ .volt = 3963, .cur = 156, .level = 25},
	{ .volt = 3672, .cur = 178, .level = 20},
	{ .volt = 3651, .cur = 178, .level = 15},
	{ .volt = 3629, .cur = 178, .level = 10},
	{ .volt = 3612, .cur = 162, .level = 5},
	{ .volt = 3605, .cur = 162, .level = 0},
};

static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
	{ .volt = 4200, .cur = 0, .level = 100},
	{ .volt = 4190, .cur = 0, .level = 99},
	{ .volt = 4178, .cur = 0, .level = 95},
	{ .volt = 4110, .cur = 0, .level = 70},
	{ .volt = 4076, .cur = 0, .level = 65},
	{ .volt = 4046, .cur = 0, .level = 60},
	{ .volt = 4021, .cur = 0, .level = 55},
	{ .volt = 3999, .cur = 0, .level = 50},
	{ .volt = 3982, .cur = 0, .level = 45},
	{ .volt = 3965, .cur = 0, .level = 40},
	{ .volt = 3957, .cur = 0, .level = 35},
	{ .volt = 3948, .cur = 0, .level = 30},
	{ .volt = 3936, .cur = 0, .level = 25},
	{ .volt = 3927, .cur = 0, .level = 20},
	{ .volt = 3906, .cur = 0, .level = 15},
	{ .volt = 3880, .cur = 0, .level = 10},
	{ .volt = 3829, .cur = 0, .level = 5},
	{ .volt = 3820, .cur = 0, .level = 0},
};

int rx1950_bat_init(void)
{
	int ret;

	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
	if (ret)
		goto err_gpio1;
	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
	if (ret)
		goto err_gpio2;

	return 0;

err_gpio2:
	gpio_free(S3C2410_GPJ(2));
err_gpio1:
	return ret;
}

void rx1950_bat_exit(void)
{
	gpio_free(S3C2410_GPJ(2));
	gpio_free(S3C2410_GPJ(3));
}

void rx1950_enable_charger(void)
{
	gpio_direction_output(S3C2410_GPJ(2), 1);
	gpio_direction_output(S3C2410_GPJ(3), 1);
}

void rx1950_disable_charger(void)
{
	gpio_direction_output(S3C2410_GPJ(2), 0);
	gpio_direction_output(S3C2410_GPJ(3), 0);
}

267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312
DEFINE_SPINLOCK(rx1950_blink_spin);

static int rx1950_led_blink_set(unsigned gpio, int state,
	unsigned long *delay_on, unsigned long *delay_off)
{
	int blink_gpio, check_gpio;

	switch (gpio) {
	case S3C2410_GPA(6):
		blink_gpio = S3C2410_GPA(4);
		check_gpio = S3C2410_GPA(3);
		break;
	case S3C2410_GPA(7):
		blink_gpio = S3C2410_GPA(3);
		check_gpio = S3C2410_GPA(4);
		break;
	default:
		return -EINVAL;
		break;
	}

	if (delay_on && delay_off && !*delay_on && !*delay_off)
		*delay_on = *delay_off = 500;

	spin_lock(&rx1950_blink_spin);

	switch (state) {
	case GPIO_LED_NO_BLINK_LOW:
	case GPIO_LED_NO_BLINK_HIGH:
		if (!gpio_get_value(check_gpio))
			gpio_set_value(S3C2410_GPJ(6), 0);
		gpio_set_value(blink_gpio, 0);
		gpio_set_value(gpio, state);
		break;
	case GPIO_LED_BLINK:
		gpio_set_value(gpio, 0);
		gpio_set_value(S3C2410_GPJ(6), 1);
		gpio_set_value(blink_gpio, 1);
		break;
	}

	spin_unlock(&rx1950_blink_spin);

	return 0;
}

313 314
static struct gpio_led rx1950_leds_desc[] = {
	{
315 316 317 318
		.name			= "Green",
		.default_trigger	= "main-battery-full",
		.gpio			= S3C2410_GPA(6),
		.retain_state_suspended	= 1,
319 320
	},
	{
321 322 323 324 325
		.name			= "Red",
		.default_trigger
			= "main-battery-charging-blink-full-solid",
		.gpio			= S3C2410_GPA(7),
		.retain_state_suspended	= 1,
326 327
	},
	{
328
		.name			= "Blue",
329
		.default_trigger	= "rx1950-acx-mem",
330 331
		.gpio			= S3C2410_GPA(11),
		.retain_state_suspended	= 1,
332 333 334 335 336 337
	},
};

static struct gpio_led_platform_data rx1950_leds_pdata = {
	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
	.leds		= rx1950_leds_desc,
338
	.gpio_blink_set	= rx1950_led_blink_set,
339 340 341 342 343 344 345 346 347 348
};

static struct platform_device rx1950_leds = {
	.name	= "leds-gpio",
	.id		= -1,
	.dev	= {
				.platform_data = &rx1950_leds_pdata,
	},
};

349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374
static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
	.init = rx1950_bat_init,
	.exit = rx1950_bat_exit,
	.enable_charger = rx1950_enable_charger,
	.disable_charger = rx1950_disable_charger,
	.gpio_charge_finished = S3C2410_GPF(3),
	.lut_noac = bat_lut_noac,
	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
	.lut_acin = bat_lut_acin,
	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
	.volt_channel = 0,
	.current_channel = 1,
	.volt_mult = 4235,
	.current_mult = 2900,
	.internal_impedance = 200,
};

static struct platform_device rx1950_battery = {
	.name             = "s3c-adc-battery",
	.id               = -1,
	.dev = {
		.parent = &s3c_device_adc.dev,
		.platform_data = &rx1950_bat_cfg,
	},
};

375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623
static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
	.displays = &rx1950_display,
	.num_displays = 1,
	.default_display = 0,

	.lpcsel = 0x02,
	.gpccon = 0xaa9556a9,
	.gpccon_mask = 0xffc003fc,
	.gpcup = 0x0000ffff,
	.gpcup_mask = 0xffffffff,

	.gpdcon = 0xaa90aaa1,
	.gpdcon_mask = 0xffc0fff0,
	.gpdup = 0x0000fcfd,
	.gpdup_mask = 0xffffffff,

};

static struct pwm_device *lcd_pwm;

void rx1950_lcd_power(int enable)
{
	int i;
	static int enabled;
	if (enabled == enable)
		return;
	if (!enable) {

		/* GPC11-GPC15->OUTPUT */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPC(i), 1);

		/* Wait a bit here... */
		mdelay(100);

		/* GPD2-GPD7->OUTPUT */
		/* GPD11-GPD15->OUTPUT */
		/* GPD2-GPD7->1, GPD11-GPD15->1 */
		for (i = 2; i < 8; i++)
			gpio_direction_output(S3C2410_GPD(i), 1);
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPD(i), 1);

		/* Wait a bit here...*/
		mdelay(100);

		/* GPB0->OUTPUT, GPB0->0 */
		gpio_direction_output(S3C2410_GPB(0), 0);

		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
		for (i = 1; i < 5; i++)
			gpio_direction_output(S3C2410_GPC(i), 0);

		/* GPC15-GPC11->0 */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPC(i), 0);

		/* GPD15-GPD11->0, GPD2->GPD7->0 */
		for (i = 11; i < 16; i++)
			gpio_direction_output(S3C2410_GPD(i), 0);

		for (i = 2; i < 8; i++)
			gpio_direction_output(S3C2410_GPD(i), 0);

		/* GPC6->0, GPC7->0, GPC5->0 */
		gpio_direction_output(S3C2410_GPC(6), 0);
		gpio_direction_output(S3C2410_GPC(7), 0);
		gpio_direction_output(S3C2410_GPC(5), 0);

		/* GPB1->OUTPUT, GPB1->0 */
		gpio_direction_output(S3C2410_GPB(1), 0);
		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
		pwm_disable(lcd_pwm);

		/* GPC0->0, GPC10->0 */
		gpio_direction_output(S3C2410_GPC(0), 0);
		gpio_direction_output(S3C2410_GPC(10), 0);
	} else {
		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
		pwm_enable(lcd_pwm);

		gpio_direction_output(S3C2410_GPC(0), 1);
		gpio_direction_output(S3C2410_GPC(5), 1);

		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
		gpio_direction_output(S3C2410_GPC(7), 1);

		for (i = 1; i < 5; i++)
			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

		for (i = 11; i < 16; i++)
			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

		for (i = 2; i < 8; i++)
			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

		for (i = 11; i < 16; i++)
			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

		gpio_direction_output(S3C2410_GPC(10), 1);
		gpio_direction_output(S3C2410_GPC(6), 1);
	}
	enabled = enable;
}

static void rx1950_bl_power(int enable)
{
	static int enabled;
	if (enabled == enable)
		return;
	if (!enable) {
			gpio_direction_output(S3C2410_GPB(0), 0);
	} else {
			/* LED driver need a "push" to power on */
			gpio_direction_output(S3C2410_GPB(0), 1);
			/* Warm up backlight for one period of PWM.
			 * Without this trick its almost impossible to
			 * enable backlight with low brightness value
			 */
			ndelay(48000);
			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
	}
	enabled = enable;
}

static int rx1950_backlight_init(struct device *dev)
{
	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
	lcd_pwm = pwm_request(1, "RX1950 LCD");
	if (IS_ERR(lcd_pwm)) {
		dev_err(dev, "Unable to request PWM for LCD power!\n");
		return PTR_ERR(lcd_pwm);
	}

	rx1950_lcd_power(1);
	rx1950_bl_power(1);

	return 0;
}

static void rx1950_backlight_exit(struct device *dev)
{
	rx1950_bl_power(0);
	rx1950_lcd_power(0);

	pwm_free(lcd_pwm);
	gpio_free(S3C2410_GPB(0));
}


static int rx1950_backlight_notify(struct device *dev, int brightness)
{
	if (!brightness) {
		rx1950_bl_power(0);
		rx1950_lcd_power(0);
	} else {
		rx1950_lcd_power(1);
		rx1950_bl_power(1);
	}
	return brightness;
}

static struct platform_pwm_backlight_data rx1950_backlight_data = {
	.pwm_id = 0,
	.max_brightness = 24,
	.dft_brightness = 4,
	.pwm_period_ns = 48000,
	.init = rx1950_backlight_init,
	.notify = rx1950_backlight_notify,
	.exit = rx1950_backlight_exit,
};

static struct platform_device rx1950_backlight = {
	.name = "pwm-backlight",
	.dev = {
		.parent = &s3c_device_timer[0].dev,
		.platform_data = &rx1950_backlight_data,
	},
};

static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
	switch (power_mode) {
	case MMC_POWER_OFF:
		gpio_direction_output(S3C2410_GPJ(1), 0);
		break;
	case MMC_POWER_UP:
	case MMC_POWER_ON:
		gpio_direction_output(S3C2410_GPJ(1), 1);
		break;
	default:
		break;
	}
}

static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
	.gpio_detect = S3C2410_GPF(5),
	.gpio_wprotect = S3C2410_GPH(8),
	.set_power = rx1950_set_mmc_power,
	.ocr_avail = MMC_VDD_32_33,
};

static struct mtd_partition rx1950_nand_part[] = {
	[0] = {
			.name = "Boot0",
			.offset = 0,
			.size = 0x4000,
			.mask_flags = MTD_WRITEABLE,
	},
	[1] = {
			.name = "Boot1",
			.offset = MTDPART_OFS_APPEND,
			.size = 0x40000,
			.mask_flags = MTD_WRITEABLE,
	},
	[2] = {
			.name = "Kernel",
			.offset = MTDPART_OFS_APPEND,
			.size = 0x300000,
			.mask_flags = 0,
	},
	[3] = {
			.name = "Filesystem",
			.offset = MTDPART_OFS_APPEND,
			.size = MTDPART_SIZ_FULL,
			.mask_flags = 0,
	},
};

static struct s3c2410_nand_set rx1950_nand_sets[] = {
	[0] = {
			.name = "Internal",
			.nr_chips = 1,
			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
			.partitions = rx1950_nand_part,
	},
};

static struct s3c2410_platform_nand rx1950_nand_info = {
	.tacls = 25,
	.twrph0 = 50,
	.twrph1 = 15,
	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
	.sets = rx1950_nand_sets,
};

static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
	.vbus_pin = S3C2410_GPG(5),
	.vbus_pin_inverted = 1,
624
	.pullup_pin = S3C2410_GPJ(5),
625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712
};

static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
	.delay = 10000,
	.presc = 49,
	.oversampling_shift = 3,
};

static struct gpio_keys_button rx1950_gpio_keys_table[] = {
	{
		.code		= KEY_POWER,
		.gpio		= S3C2410_GPF(0),
		.active_low	= 1,
		.desc		= "Power button",
		.wakeup		= 1,
	},
	{
		.code		= KEY_F5,
		.gpio		= S3C2410_GPF(7),
		.active_low	= 1,
		.desc		= "Record button",
	},
	{
		.code		= KEY_F1,
		.gpio		= S3C2410_GPG(0),
		.active_low	= 1,
		.desc		= "Calendar button",
	},
	{
		.code		= KEY_F2,
		.gpio		= S3C2410_GPG(2),
		.active_low	= 1,
		.desc		= "Contacts button",
	},
	{
		.code		= KEY_F3,
		.gpio		= S3C2410_GPG(3),
		.active_low	= 1,
		.desc		= "Mail button",
	},
	{
		.code		= KEY_F4,
		.gpio		= S3C2410_GPG(7),
		.active_low	= 1,
		.desc		= "WLAN button",
	},
	{
		.code		= KEY_LEFT,
		.gpio		= S3C2410_GPG(10),
		.active_low	= 1,
		.desc		= "Left button",
	},
	{
		.code		= KEY_RIGHT,
		.gpio		= S3C2410_GPG(11),
		.active_low	= 1,
		.desc		= "Right button",
	},
	{
		.code		= KEY_UP,
		.gpio		= S3C2410_GPG(4),
		.active_low	= 1,
		.desc		= "Up button",
	},
	{
		.code		= KEY_DOWN,
		.gpio		= S3C2410_GPG(6),
		.active_low	= 1,
		.desc		= "Down button",
	},
	{
		.code		= KEY_ENTER,
		.gpio		= S3C2410_GPG(9),
		.active_low	= 1,
		.desc		= "Ok button"
	},
};

static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
	.buttons = rx1950_gpio_keys_table,
	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
};

static struct platform_device rx1950_device_gpiokeys = {
	.name = "gpio-keys",
	.dev.platform_data = &rx1950_gpio_keys_data,
};

713 714 715 716 717 718 719 720 721 722 723
static struct uda1380_platform_data uda1380_info = {
	.gpio_power	= S3C2410_GPJ(0),
	.gpio_reset	= S3C2410_GPD(0),
	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
};

static struct i2c_board_info rx1950_i2c_devices[] = {
	{
		I2C_BOARD_INFO("uda1380", 0x1a),
		.platform_data = &uda1380_info,
	},
724 725 726 727 728 729 730
};

static struct platform_device *rx1950_devices[] __initdata = {
	&s3c_device_lcd,
	&s3c_device_wdt,
	&s3c_device_i2c0,
	&s3c_device_iis,
731
	&samsung_asoc_dma,
732 733 734 735 736 737 738 739 740 741
	&s3c_device_usbgadget,
	&s3c_device_rtc,
	&s3c_device_nand,
	&s3c_device_sdi,
	&s3c_device_adc,
	&s3c_device_ts,
	&s3c_device_timer[0],
	&s3c_device_timer[1],
	&rx1950_backlight,
	&rx1950_device_gpiokeys,
742 743
	&power_supply,
	&rx1950_battery,
744
	&rx1950_leds,
745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779
};

static struct clk *rx1950_clocks[] __initdata = {
	&s3c24xx_clkout0,
	&s3c24xx_clkout1,
};

static void __init rx1950_map_io(void)
{
	s3c24xx_clkout0.parent  = &clk_h;
	s3c24xx_clkout1.parent  = &clk_f;

	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));

	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
	s3c24xx_init_clocks(16934000);
	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));

	/* setup PM */

#ifdef CONFIG_PM_H1940
	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
#endif

	s3c_pm_init();
}

static void __init rx1950_init_machine(void)
{
	int i;

	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
780
	s3c_i2c0_set_platdata(NULL);
781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806
	s3c_nand_set_platdata(&rx1950_nand_info);

	/* Turn off suspend on both USB ports, and switch the
	 * selectable USB port to USB device mode. */
	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
						S3C2410_MISCCR_USBSUSPND0 |
						S3C2410_MISCCR_USBSUSPND1, 0x0);

	/* mmc power is disabled by default */
	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
	gpio_direction_output(S3C2410_GPJ(1), 0);

	for (i = 0; i < 8; i++)
		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 10; i < 16; i++)
		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 2; i < 8; i++)
		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	for (i = 11; i < 16; i++)
		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));

807 808 809 810 811 812 813
	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
	gpio_direction_output(S3C2410_GPA(3), 0);
	gpio_direction_output(S3C2410_GPA(4), 0);
	gpio_direction_output(S3C2410_GPJ(6), 0);

814
	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
815 816 817

	i2c_register_board_info(0, rx1950_i2c_devices,
		ARRAY_SIZE(rx1950_i2c_devices));
818 819
}

820 821 822
/* H1940 and RX3715 need to reserve this for suspend */
static void __init rx1950_reserve(void)
{
823 824
	memblock_reserve(0x30003000, 0x1000);
	memblock_reserve(0x30081000, 0x1000);
825 826
}

827 828
MACHINE_START(RX1950, "HP iPAQ RX1950")
    /* Maintainers: Vasily Khoruzhick */
829
	.atag_offset = 0x100,
830
	.map_io = rx1950_map_io,
831
	.reserve	= rx1950_reserve,
832 833 834 835
	.init_irq = s3c24xx_init_irq,
	.init_machine = rx1950_init_machine,
	.timer = &s3c24xx_timer,
MACHINE_END